C/O Tehsil Office Building in 2nd floor at Combined Office Building at Jaisinghpur Distt. Kangra (H.P.)

Amount

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty Newton per square millimetre) with cement contents not less than 480 kgs (Four hundred Eighty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended floors, roofs,landings shelves and their support balconies,beams, girder, bressumers and cantilever as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty Newton per square millimetre) with cement contents not less than 480 kgs (Four hundred Eighty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Column, Pillars, posts and struts above plinth level to floor two level as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kgs (Three hundred Twenty kilogram) per cubic metre ) reinforced concrete chajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (1cement : 3 Sand) to give a smooth and even surface centring/form work and curing complete excluding the cost of reinforcement. Detail of cost for 30 metres longs and 60cm wide and 8cm thick complete as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty Newton per square millimetre) with cement contents not less than 310 kgs (three hundred ten kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in String courses, copings, bed plates, anchor blocks, plain windows sills and the like as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x 19cm x20 cm i/c quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) laid with cement mortar 1:6 (1 cement : 6 sand) i/c curing complete in super structure upto floor two level as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Precast concrete block masonry in Cavity partition walls 10 cm. thick with solid block of approved size including quion blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm and down gauge) in :- 1:6 (One cement: 6 Sand) as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any clours of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. of 150mm long brackets of 15mmx15mm M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm M.S. square tube of 19 gauge EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100 long with wooden or rawl plugs emedded in masonry complete as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S.( Mild Steel) plain grills of required pattern in window frames etcetera with M.S.Flats,20x5mm ( twenty into five millimetre) and 8 x 8 mm ( eight into eight millimetres) solid square or round bars, fixing to frames with round headed bolts and nuts or by screws or welding as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetres) thick and 100mm (100 millimeters) wide pelmet with 25mm (twenty five millimeters) dia wooden curtain rod and brackets including fixing with 25x3mm ( twenty five into three millimeters) M.S.(Mild steel) flat 10cm (ten centimeters) long and plugs etcetera 1st class deodar wood complete as per H.P.P.W.D specification, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 12mm thick (twelve milimetres) thick pre-laminated board both bwp side phenol bonded of Alpro/Century ISI marked No. IS 12823 (Twelve thousand eight hundred twenty three) exterior/ interior grade Panalled shutters with 40mm (forty millimetres) frame of second class deadar wood for doors including bright finished/ black enamelled iron butt hinghes with necessary screws etcetera complete as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing to existing door frames 30mm thick factory made wire mesh solid PVC door shutters consisting of frame made out of M.S. tube of 19 gauge thickness of size 19mmx19mm for style and 15mmx15mm M.S. square tube for top, bottom & Lock rail M.S. frame shall have a coat of steel primer and covered with 5mm thick PVC solid sheet heat moulded "C" channel of size 75mmx30mmx60mm out of which 10mm shall be bent at 90degree towards inner side on front face of the door M.S. frame at lock rail shall be covered with 100mm wide PVC sheet out of which 10mm on both the edges shall be bent at 90 degree on front face of the door and 85mm wide PVC sheet shall cover the M.S. frame at top, bottom & lock rail lof 70mm on back side of door 5mm thick 20mm wide cross PVC sheet as gap insert for top and bottom rail, PVC sheet beading of 10mm thick, 15mm wide PVC sheet beading in to be stick internally in the back side of style and rails of door with solvent cement adhesive i/c fixing of G.I. wire mesh 85G or 0.56 dia wire fixed between PVC sheet of style and rail bent at 90 degree on front face using 15mmx15mm L-shape PVC beading nailed on style a rails i/c fixing shutter to existing door frame with M.S. butt hinges 100x58x1.90mm with necessary screws etc. complete. complete as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeters) dia wooden curtain rod with brackets, plugs etcetera 2nd class deodar wood complete as per H.P.P.W.D specification, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etcetera complete as per specifications approved drawing, design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

300 X 16 mm (three hundred into sixteen millimetre) size

250 X 16 mm (two hundred fifty into sixteen millimetres) size

Providing and fixing aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

250x10 (two hundred into ten millimetres)

150 x 10 mm (two hundred fifty into ten millimetres) size

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

125 mm (one hundred twenty five millimetres)

Providing and fixing oxidized M.S. presses parliamentary hinges with necessary screws etc complete 150x125x27x2.80mm as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. hooks and eyes with necessary screws etcetera complete 150 mm (one hundred fifty millimetre) size as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

6mm (Six milimetres) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer- in-charge.The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer- in-charge.The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Applying priming with cement primer coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with :- Readymixed primer as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on un-decorated wall surfaces(two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer- in-charge. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete. as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Distempering (Two coats) with oil bound washable distemper of Asian paints and manufactureand of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matters and also including preparing the surface even and sand papered smooth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Distempering (two coats) with Synthetic oil bound washable distemper of Asian paints and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matters and also including preparing the surface even and sand papered smooth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete (25 mm thick ) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing factory made flush door shutter 35mm thick (thirty five millimetre), commercial both side i.e. non decorative, (Phenol bounded, termite resistant and water proof) core of block board construction with full frame of first class hard wood well matched commercial 3 (three) ply veneer with vertical grain or cross bend & face veneer on both sides of flush door ISI marked No. IS 2202 of kit ply/Alpro including black enameled M.S. butt hinges, Screws etcetera complete .As per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16 x3.15 mm (Sixteen into three decimal one five millimetre) iron lugs 10 cm (Ten centimetres) long embedded in cement - concrete blocks 15cm x 10cm x 10 cm (fifteen into ten into ten centimetres) size of 1:3:6 (one cement : three sand: 6 stone aggregate ) 20mm (twenty millimetre) nominal size or with wooden plugs and screws rawl plugs and screws or with fixing clips or bolts and nuts as required and iron fitting including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paints as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing factory made double steel shutter windows side huge (one glazed and other wire gauge ) of standard rolled steel section jointing, mitered, welded and manufactured to relevant ISI standard specifications with steel plugs and screws or rawl plugs/ screws or with fixing clips or with bolts and nuts as required and iron fittings , including providing and fixing of glass pans with glazing clips and special metal sash putty for glazed side of shutter and wire gauge of ISI designation 85G with metal beading on other side complete including priming coat of red lead paint as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

White glazed tiles 6mm (Six millimetres) thick in skirting of IS quality 30x20cm (Thirty into Twenty centimetres) of NITCO/Somany tiles or its equivalent in risers of steps and dado laid on 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry above plinth level to all floor level as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof termite resistant commercial board of Uniply / Green ply in shelves/box for cupboard with butt joints & fixing with nails & screws etc complete) as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing dias table made of 19 mm thick commercial board including drawers, cabinet work and vertical portion of the table towards the public side shall be finished with 4 mm thick teak ply wood to be matched with the shade of panelling and shall have the pattern of beading same as that of panelling table top and all the others visible portion of commercial board and sitting side shall be finished with 1 mm thick lamination of approved shade and polished complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 75 mm x 60mm rounded hand rails 2nd class indian teak wood. in straight length complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero millimetres) thick pre-painted Tata / Shakti sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5(five micron) primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diameters with pre-painted limpet and rubber washers complete with all accessories as required as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Six zero millimetres) thick pre-painted Tata / Shakti sheet steel ( Factory made) shall be having proper Gola / shape with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diameters with pre-painted G.I. limpet and bitumen washers complete with all accessories as required as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing valleys 90cm (Ninety centimetres) over all with 0.60mm (Zero decimal Six zero millimetres) thick pre-painted steel sheet of Tata / Shakti in valleys with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (Five) microns primer coating to back coat back coat of polyester of 5 (Five) microrns over 5 (Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with pre-painted G.I. limpet and bitumen washers complete as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating plus back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. ( Mild Steel) B.P. sheet 2.00 mm (two millimetre) thick in eaves boards/facia/soffits /ceiling including cutting, fixing, jointing with gas/electric welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured and laid for separately) as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimtres)diameteres on wall face P.V.C. (D-plast) rain water pipes of working pressure not less than 4.50 kgs(Four decimal five zero kilograms)per centimetre including filling the joints with aproved adhesive complete and as directed by the Engineer- in-charge within all leads, lifts of materials and other incidentals The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. .

Providing and fixing on wall face 2.7mm ( two point seven millimetres) thick P.V.C. (D-plast) of supreme or its equivalent acessories for rain water pipes including filling the joints with approved adhesive complete and within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer- in-charge.The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. .

100mm (One hundred milimtres)diameteres PVC Plain bend

100mm (One hundred milimtres)diameteres PVC shoe

Providing and fixing 75mm (Seventy five millimetre) diametre M. S. holder bat clamps of approved design to PVC pipes embedded in cement concrete block 10cmx10cmx10cm (Ten centimetre into Ten centimetre into Ten centimetre) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size and including cost of cutting holes and making good the wall etcetera as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work in trusses and trussed purlins of Tata / Sail in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint complete as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. channels in doors and windows frames manufactured from M.S. channels section 75.18 x 38.1mm (Seventy five decimal one eight into thirty eight decimal one millimetres) M.S. flat 75x5mm (Seventy five into five millimetres) combination as per design drawing including hinges, jambs, beeds if required threshold of M.S. angles 50x25mm (Fifty into Twenty five millimetres) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal Five millimetres) thick with a provision of locking arrangements shock observes and specified and applying coat of approved steel primer after pre-treatment of surfaces as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) special quality bright finished brass cup-board locks or mortise lock with six levers including necessary screws etcetera complete (Indian make of approved quality) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters with enamel paint other than white as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing IS marked CERA in white colour vitreous china water closet (European type W.C. pan) with internal "P" or "S" trap including jointily the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover tobe measured and paid for separately. (Ordinary Closet) snow white shade as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Sand cast Iron 100mm ( One hundred millimetre) P or S trap for water closet (squatting Pan) including jointing the trap with the Pan and soil pipe with approved adhesive as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 10 to 12.50/15.00 ltr. (Ten to Twelve decimal Five zero/ Fifteen Litres) P.V.C. low level flushing cistern No. 502 ISI marked 7231 of prayag in white shade of CERA with a pair of C.I. or M.S. brackets complete with fitting such as lead valve less syphon Dual flushing system 15mm ( fifteen millimetre) nominal size brass ball valve with polythene float C.P. brass handles Unions and couplings for connection with inlet outlet and over flow pipes 40mm (Forty millimetre) diameters C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately). as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing G.I intel connection for flush pipe with W.C Pan as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing plastic seat (Solid type) and cover of CERA for wash down water closet with C.P. brass hinges and rubber buffers solid type ( white plastic seat and cover) complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing ISI mark No 1025 of CERA in white shade flat back 550x400 (Five hundred fifty into four hundred millimetres) vitreous china wash basin white shade with double hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing ISI mark No 1025 of CERA in white shade flat back 550x400 (Five hundred fifty into four hundred millimetres) vitreous china wash basin white shade with double hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) dia CP brass waste ISI marked I.S. No. 8934 of Jal for wash basin or sink as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimetre) dia CP brass waste ISI marked I.S. No. 8934 of Jal for wash basin or sink as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred millimetre into Four hundred fifty millimetre) beveled edge mirror of superior glass of ISI Marked IS No. 8934 of Jal mounted on 6mm (Six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers etcetera. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder ISI marked IS No. 8934 of Jal as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing liquid soap container with C.P.brass lid ISI Marked IS No. 8934 of Jal with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish ISI Marked IS No. 8934 of Jal with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Sand cast Iron 100mm ( One hundred millimetre)/cast iron spun spigot and socket soil, waste and ventilating pipes (lead caulked joints ) as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing sand cast iron / cast iron spun fittings and accessories: as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

75mm nominal size bend

100mm nominal size bend

Providing and fixing Sand cast iron heal rest including filling the joints with approved adhesive complete within all leads, lifts of materials and other incidentals as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

110 mm (One hundred ten millimetres) nominal bore/diametre

75 mm (Seventy five millimetres) nominal bore/diametre

Providing and fixing cast iron Cowl including fixing with approved adhesive etcetera complete. As per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

75 mm (Seventy five millimetres) nominal bore/diameter

110 mm (One hundred ten millimetres) nominal bore/diameter

Providing lead caulked joints to sand cast iron Cast (spun) iron pipes and fittings including testing of joints as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

75 mm (Seventy five millimetres) nominal bore/diameter

110 mm (One hundred ten millimetres) nominal bore/diameter

Providing and fixing 75 mm (Seventy five millimetres) nominal diameter cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vest arm complete including cost of cutting and making good the walls and floors as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

P/F polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipes U.V. stabilized with carbon forming to IS 15450-2004 for water supply i/c clamps at one meter spacing, cutting, fixing and making good the walls etcetra but excluding the cost of fitting( internal work) pipes exposed on walls. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.

1216(16 mm O.D.) pipe

1620(20 mm O.D.) pipe

Providing & fixing polyethelene-aluminium-polyethelene (PE-AL-PE) composite pressure pipes conforming to IS 15450 U.V stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree C including all special fittings of composite material (engineering plastic blend & brass inserts wherever required) e.g elbows, tees, reducers, couplers & connectors etc with clamps at 1.00 m spacing. This includes the costs of cutting chases & including testing of joints complete as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

1216(16 mm O.D.) pipe

1620(20 mm O.D.) pipe

Providing and fixing composite and seal compression fittings as per IS:15450-2004 for cold water supply eg tees,elbows,reducers connecter couplers and clamp with jointing, testing and fixing complete including cutting and making good the walls etc (for concealed pipes) as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. (Equal Tees)

Equal Tees

1216 mm size

1620 mm size

Reducing tees

1620 X all branches

Female elbows

1216x15mm thred

1620x15mm thred

1620x20mm thread

Male thread connector

1216x15mm thred

1620x15mm thred

1620x20mm thred

Couplers

1216 mm size

1620 mm size

Reducers

Providing and fixing 20mm (Twenty millimetre nominal diametre) to wall ceiling and floor galvanized mild steel tube ( medium grade ) ISI marked to be fixed with clamps including making good the walls, ceiling and floor as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm dia (fifteen millimetres) diametres C.P. (chromium plated) brass ISI Marked IS No. 8934 of Jal / Jaguar bib tap (superior or heavy type) with capstan head as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. brass stop cock ISI Marked IS No. 8934 of Jal / / Jaguar as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

15mm (Fifteen millimetre) diametre

20mm (Twenty millimetre) diametre

Providing and fixing PVC water storage tank of syntax (marked triple layer) 1000 ( One thousand) Liters net capacity with 40mm (forty millimetre) nominal size bore galvanized mild steel scour tube 25mm (twenty five millimetre) nominal bore galvanized mild steel over flow pipe, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level complete in all respect as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Raj Kumar Govt. Contractor

Sunil Walia