Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC | L1 | Accepted-AOC BEING L1 AND RESONABLE | |
| 2 | L2₹43.0 L+₹1.2 L (2.95%)Rejected-Finance ATRIA APARTMENTS 6TH FLOOR A 6 OPPOSITE GURUDWARA PERUMANOOR POST KOCHI 682015 | KOCHI | ERNAKULAM | KERALA | 682015 | L2 | Rejected-Finance Documents found correct | |
| 3 | L3₹43.4 L+₹1.6 L (3.84%)Rejected-Finance NO 9 82 IB CHAKKALAKAL SOUTH CHITTOOR P O ERNAKULAM DIST KOCHI 682 027 | KOCHI | ERNAKULAM | KERALA | 682027 | L3 | Rejected-Finance Documents found correct | |
| 4 | L4₹45.5 L+₹3.7 L (8.94%)Rejected-Finance C 111 STATION PLAZA STATION ROAD STATION ROAD BHANDUP W MUMBAI 400078 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400078 | L4 | Rejected-Finance Documents found correct | |
| 5 | L5₹47.3 L+₹5.6 L (13.4%)Rejected-Finance | L5 | Rejected-Finance Documents found correct |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
3 Sept 2024, 6:00 pmClosed
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2024_MES_662920_1
8346_GE_NW
Open Tender
Civil Works
Item Rate
365 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹99,800
Yes
27 Nov 2024
29 Jun 2024
5 Sept 2024
29 Jun 2024
3 Sept 2024
15 Jul 2024
29 Jun 2024 - 20 Jul 2024
Amount
M&L pumping out sludge water from manhole for cleaning blocked sewage line mouth and removing the sludge and burying the waste material in borrow pits complete all as specified and as directed. Note:- The Cost of making borrow pit and filling it back shall be deemed to be included in the quoted rates.
Cleaning by roding /bamboo split and Jetting Machine and taking out waste soil, sludge and other foreign materials from sewage line/effluent drains below/above GL of any dia of pipe removed with sealed container out side of MD Land as per guidelines issued by local authority complete all as specified and as directed.
Removing the chokes of WC/bathroom/kitchen traps/drains up to Ist manholes including cleaning of gully traps in single storied/ground floor of multistoried bldgs. complete all as specified and as directed.
Cleaning of covered/open drain of width 0.30 to 0.60m and removal of silt to a distance exc 100m and not exc 1500m away from starting point and disposed of complete all as specified and as directed. Note:- The Cost of removing and re-fixing of drain cover and set the cover slab with CM 1:4 shall be included in the quoted rate.
Pumping out sewage water from the septic tank / soakage well at different locations by means of sewage tanker fitted with pump (5000 ltr capacity) and disposing off out of MD land complete all as specified and as directed. Note:- (For Sl item No.1 to 5 above) (i) Contractor's supervisor has to collect complaint slip from AGE B/R-I office at 9000 hrs on all working days. The complaints has to be attended and submit back the slip duly signed by the user on the same day by 1700 hrs to the Office. (ii) If the contractor fails to attend the complaint, a penal recovery @ Rs. 500 per day per complaint shall be deducted from the amount due to the contractor. (iii) If there is any major blockage in sewage line/Septic tank or any emergency situation immediate service has to be provided by the Contractor even in holidays without any extra cost complete all as specified and as directed.
Taking down eaves gutters and rain water pipes (any size or pattern ), including all fittings, heads, shoes, bends, swan-necks etc. Including cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors (jointing to be done with solvent cement) complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors (jointing to be done with solvent cement) complete all as specified and as directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (jointing to be done with solvent cement) complete all as specified and as directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (jointing to be done with solvent cement) complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed.
S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.
S&F in repair 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.
S&F 75 mm dia PVC (SWR) vent cowl complete all as specified and as directed.
Demolition of Pre-cast cement concrete block built in cement mortar including all quoins, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed.
Taking down cement plastered on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L for rendering 15mm thick on brick or concrete wall surfaces with cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparatin of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer complete all as specified and as directed. Note:- The work shall be carried out through authorised applicators of approved manufacturer as per their instuction. The contractor shall provide 05 years Guarantee for the effectiveness of anti fungal painting from the date of certified completion of subject CA.
M&L for complete removal existing treatment of external wall surfaces by using modern tools and techniques like pre watered pipe jet, mechanical grinding etc complete and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer complete all as specified and as directed. Note:- The work shall be carried out through authorised applicators of approved manufacturer as per their instuction. The contractor shall provide 05 years Guarantee for the effectiveness of anti fungal painting from the date of certified completion of subject CA.
M&L for preparation of old external surfaces of wall and applying one coats of Premium acrylic emulsion paint, Alkali & fungal resistant, dirt resistant exterior paint of required shade complete all as specified and as directed.
M&L preparation of old decorated surfaces of walls (plastered or un-plastered) including cornices and applying one coat of cement base paint complete all as specified and as directed.
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or levelling course of floor etc. complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 (using 20 mm graded aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for cement concrete ( 1:3:6 ) type C1 (using 20 mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement and necessary form work complete all as specified and as directed. Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.
Dismantling fencing wire mesh, any type including mild steel deformed bars in any size complete all as specified and as directed.
Dismantling post or strut (wood, steel or RCC any section) including taking out embedded portion in concrete, brick work etc
M&L for excavation in post hole soft/loose soil(or similar holes) each n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified.
S&F MS post and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. Flat iron fillets ( for securing wire mesh etc) incl all necessary drilling bolting or riveting etc. and similar work confirm complete all as specified and as directed.
M&L Cement concrete in post holes foundation fillings and mass concreting PCC 1:3:6 type C2 (using 40mm graded stone aggregate) complete all as specified and as directed by Engr-in-Charge.
S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed Note : Each line wire shall be measured.
S&F in repairs MS galvanised chain link fencing of grid size 50x50x3.10mm dia wire (Weight not less than 3.25 Kg/Sqm) straining bolts, provision of binding wire etc complete all as specified and as directed.
M&L for mild steel round bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for as in line wire for straining fencing and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed incl removal of old one
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
S &F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete quality A complete all as specified and as directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
M&L welding in repairs exc 2.5cm but n.exc 5cm in length of welding and n.exc 6mm thickness of metal including cleaning and preparing the steel surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required complete all as specified and as directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of appropriate primer complete all as specified.
M&L for preperation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and as directed
Dismantling of floor hearth or wall tilling tiles including CM bedding (but not backing) and disposing the rubbish off the premises as directed
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete. Note:Quoted rate shall be inclusive of screed bed
Dismantling Stone slabs laid dry or laid dry and pointed and tiles of any description or thickness in floors, aprons etc.
Material and labour for Machine pressed precast concrete interlocking paver block any shape and size as approved confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment,over and including 30mm thick coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc. 25cm thick and add for well ramming including watering as required complete all as specified and as directed.
Demolition of reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for mild steel TMT bars 5mm to 10mm dia cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for Providing precast cement concrete Type B1 1:2:4 (20mm graded stone aggregate) in drain cover slabs and similar articles with plain faces and setting in cement mortar 1:4 with joints to match complete including necessary form work complete all as specified and as directed.
M&L 18 to 20 mm thick machine cut polished granite 1st quality Granite (of any type) work (table rubbed and polished) for wall lining and Gate pillars (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including grinding and moulding of exposed edges of granite complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)
S&F in repair PVC waste pipe 32mm dia, 60 cm long for wash hand basin/kitchen sink with cup, complete all as specified.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.
Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 100 mm internal dia
M&L for 600mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed
M&L for PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed
M&L for concrete bed to drain pipes 100 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete Type C-2 1:3:6 complete all as specified and as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and as directed.
Removing excavated material to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and as directed.
M/s T.P SHAJI (BID ID -3068059)
S&C ENTERPRISES (BID ID -3068782)
shine industries (BID ID -3067628)
PHEJAYS AGENCIES (BID ID -3068356)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .