Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC MS Modernage Construction is lowest and accepted | |
| 2 | L2₹37.8 L+₹3.0 L (8.48%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹38.7 L+₹3.8 L (11.0%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹39.9 L+₹5.1 L (14.5%)Rejected-Finance | L4 | Rejected-Finance Not Lowest |
Tender Value
₹46.2 L
EMD Value
₹92,420
Closing Date
26 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Y K Gour
HQ CWE Ranchi, MES, Dipatoli Cantt
CONSTRUCTION OF NEW ROAD AT RAMGARH CANTT UNDER GE RAMGARH
2024_MES_640222_2
80599/1513/E8
Open Tender
Civil Works - Roads
Item Rate
90 days
GE Ramgarh
As per tender documents
6 documents required · 6 mandatory
₹500
GE Ramgarh
₹92,420
Yes
HQ CWE Ranchi
19 Apr 2024
5 Mar 2024
2 Apr 2024
5 Mar 2024
26 Mar 2024
12 Mar 2024
5 Mar 2024 - 8 Mar 2024
8 Mar 2024
Amount
Surface excavation n.exc 30 cm deep and average 15 cm deep and getting out in soft/losse soil complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out soft/loose soil, complete all as specified and directed .
Returning, filling in and including spreading, leveling, watering & well ramming in layers not exceeding 25 cm in layer, complete all as specified and directed .
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point ,complete all as specified and directed .
M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base, filling and mass concrete etc complete all as specified and directed
M&L for for machine pressed precast concrete interlocking paver block any shape and size coforming to IS 15658 - 2006 of 80 mm thick using rubber moulded casting with glosy finish with grey cement and pigment M-40 grade of concrete complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for Plain cement concrete1:2:4 type B-0, (12.5 mm graded crushed stone aggregate) as in road/pavements,ramps,berms, coping, bed block , water trought and similar works including rounding, chamfered and throating including necessary form work ,complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed
M&L for preparing of newly plastered surfaces of walls and applying two coat of cement based paint over a coat of cement base primer complete all as specified and directed.
Rolling and consolidating formation surfaces in cutting with 8 to 12 tonne power road roller including filling in hollow and depression which occurs during rolling complete all as specified and directed.
M&L for soling (sub base) with broken boulders or quarried stones 150 mm thick spread thickness interstices filled surface formed rolled and consolidated to required gradient and camber etc complete all as specified and directed.
M&L for 150 mm thick (compacted thickness) WBM, with coarse aggregates of granite, trap or basalt stone grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread and consolidated to gradient and camber and rolled with 8 to 10 tonne power road roller complete all as specified.
M&Lfor preparation of unsurfaced WBM surface by brushing with wire brush and applying Paving bitumen evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm etc complete all as specified and as directed.
M&L for Bituminous premix aphaltic semi-dense concrete 40mm thick consolidated thickness with 5.5% binder content(VG 30) by weight of total mix rolled and compacted with 8 to 12 tonne power road roller to required camber and gradient, complete all as specified and directed.
M&L for Continuous brick edging with width equal to the width of brick, laid dry on end vertically old size bricks with kiln burnt sub class B bricks of compressive strength not less than 75 kg/ Sqm laid dry on end including necessary earth work etc complete all as specified and directed.
M&L for preparing of black top road surface removing dust, dirt grease and other foregn matter etc. to receive the marking and applying one coat of retro reflective thermoplastic road marking paint (white or yellow shade) not less than 2.5mm thick in lines, arrow, dashes and letter exceeding 10 cm in width applied hot using application unit and retro reflective glass beads, @ 250 to 300 gm/sqm to with stand vehicular traffic load, material shall be conforming to BS-3262 (Part-I) 1989 read in conjection with the MOST (Ministry of Surface Transport) specification, 8034 Vol- III as laid down in the specification for road and bright work third revision etc. Complete all as specified and directed.
S&F for solar cat eye aluminium alloy shall (100% water proffing design according to 65) of size 125mm X125mm X 25mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 V/0.3 Watt one NI-ed rechargeable battery (1.2V/1600MA ) consisting of super bright LED with 10000 to 18000 mcd complete as per manufactures instruction etc complete all as specified and directed .
M&L for 600 mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars complete, complete all as specified and directed .
M&L for burnt brick work with sub class 'B' brick well burnt old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 ) complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in drain and surface channels complete all as specified and directed.
Extra for forming fair finished channel or drain 30 cm inner girth in cement concrete using extra cement including modular mitered stoped ends etc complete all as specified and directed.
Add or deduct for each 25mm inner girth or part thereof over or less than 30 cm girth, complete all as specified and directed.
M & L for Rendering 15 mm thick on concrete/fair faces of brick surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.
M&L for Precast RCC 1:2:4 type B-1 of 20 mm graded stone as in landings,cover slab (for man holes etc.) chullah hoods,chajjas,water troughs,mangers,shelves and similar articles with plane faces etc including necessary form work .complete all as specified and directed. Note:-Reinforcement shall be measured and paid separately under respective item of BOQ
S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality confirming to Fe-500 or F-500 D,complete all as specified and directed.
M&L for RCC M-25 grade design mix (using 20 mm graded coarse aggregate) concrete in wall foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed by Egineer -in-Charge.
M&L RCC M-25 grade design mix (using 20 mm graded coarse aggregate) concrete in walls retaining walls basement walls, ballast walls and the like ,any thickness above top of footings,including attached pilaster and buttresses etc.complete all as specified and directed by Egineer -in-Charge.
Use and Waste of form work with Rough finished surface to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter.complete all as specified and directed by Egineer -in-Charge.
Use and Waste of form work with Rough finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.complete all as specified and directed by Egineer -in-Charge.
M & L for Rendering 5 mm thick plaster on fair faces of concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement complete all as specified and directed by Egineer -in-Charge.
RAMRAS BUILDERS
M/s Deepak kumar sinha
M/S SHAMBHU SHARAN SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .