Electrical Points for installation of 40 KVA UPS (BSED)

Amount

Electrical Points for Installation of 40KVA UPS

Wiring for circuit/ submain wiring alongwith earth wire with 4 x 16 sq.mm + 2 x 6 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Supplying and installing 225 mm width X 50 mm depth X 1.6 mm thickness perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

Supplying and fixing 4 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 63 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load of Four Pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load of Triple pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and making end termination of suitable size for the submain wiring with copper lugs for 4 x 16 sq.mm + 2 x 6 sq.mm of PVC insulated copper conductor, including all other accessories

Charges for removing the existing vertical type old Distribution board with MCB, RCCB, & other accessories without any damage etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3 1/2 * 70 sq. mm (38mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and fixing of 12 way, Double door surface/ recess mounting, vertical type, 415 V, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 A tinned copper bus bar, common neutral link, earth bar, din bar, cable ties for mounting MCBs (but without MCCB and incomer) as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for 12 way Double door TPN MCCB DB , 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.

Supplying and fixing 125A, 25kA, 4 pole (Three pole and Neutral), 415 V, Moulded case circuit breaker (MCCB) with thermal magnetic protection unit in the existing MCCB DB , complete with connections, testing and commissioning etc, as required.

Marking on distribution boards using paint (incoming, outgoing, cable size, switchgear rating etc) as required/ instruction from Engineer in charge.

EDISON ELECTRICAL ENGINEERING (BID ID -3169577)

NATIONAL ENGINEERING COMPANY (BID ID -3169071)

Nev Tech (BID ID -3169490)