Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-AOC | ₹4.6 L Quoted ₹46.0 L | L1 | Accepted-AOC Agreement executed on 06/08/2025Accepted Vide Resolution No.2(3) dtd.06-08-2025 of Thiruvarppu GP |
| 2 | L2₹5.1 L−₹40.9 L (89.0%)Rejected-AOC | ₹5.1 L−₹40.9 L (89.0%) | L2 | Rejected-AOC Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | J A CONSTRUCTIONS L2 | SUNIL KUMAR S L1 |
|---|---|---|---|---|---|
| 1.00REPAIR OF ROOF TRUSS | |||||
| 1.00 | 15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet | 286.3 | sqm | 74 ₹21,186.2 | 25 ₹7,157.5 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 286.3 | sqm | 810 ₹2,31,903 | 750 ₹2,14,725 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 534.6 | kg | 167 ₹89,278.2 | 151 ₹80,724.6 Lowest |
| 1.00 | 50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 45.97 | sqm | 816 ₹37,510.7 Lowest | 817 ₹37,556.67 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) | 27 | metre | 537 ₹14,499 | 490 ₹13,230 Lowest |
| 2.00Shelf | |||||
| 2.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 48.01 | kg | 588 ₹28,227.53 Lowest | 594 ₹28,515.56 |
| 2.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 48.01 | kg | 705 ₹33,844.23 | 690 ₹33,124.14 Lowest |
| 2.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 19.43 | sqm | 1,350 ₹26,229.15 Lowest | 1,350 ₹26,229.15 Lowest |
Tender Value
₹4.7 L
EMD Value
₹11,639
Closing Date
27 Jun 2025, 10:00 amClosed
MARTIN CHARLES
AE LID AND EW THIRUVARPPU GP
RETENDER Annual Plan THIRUVARPPU GP PROJECT NO 325 RENOVATION AND LEAKAGE REPAIRING OF PANCHAYAT OFFICE HALL General Civil Work
2025_LSGD_770357_1
ET-01/2025-26/AELSGD/TVP
Open Tender
Civil Works - Buildings
Item Rate
240 days
THIRUVARPPU GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,030
Yes
₹11,639
Yes
5 Sept 2026
20 Jun 2025
30 Jun 2025
20 Jun 2025
27 Jun 2025
20 Jun 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .