Restoration of rain damages to Lift Water Supply Scheme Draman Jalag in Tehsil Jaisinghpur Distt Kangra H P

Amount

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work,jumper work,blasting in soft and hard rock and chiselling work including saturated soil slushy soil and under floor upto all depth and stacking the excavated soil not more than 3 metre clear from the edge of excavation and then returning the stacked soil in 15 centimetre (Fifteen centimetre) layer when required into plinth sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge.

Providing and laying cement concrete 1:3:6 (One cement is to three sand is to six graded stone aggregate 40 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (One cement is to two sand is to four graded stone aggregate 20 milimetre nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in:-

a) Foundation,footings bases of column and the like mass concrete within all leads and lift as per the direction of Engineer-in-charge.

Providing and laying mild steel/tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in-charge.

Providing form work with steel plates 3.15 milimetre thick welded with angle iron in frame 30x30x5 milimetre so as to give a fair finish including centering,shuttering,strutting and propping etc.with wooden battens ballies,height of propping and centering below supporting floor two ceiling not exceeding 4 metre and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

a) Vertical surfaces such as walls(any thickness)partitions walls and the like including attached pillasters,buttreses plinth string courses and the like within all leads and lifts as per the direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work including cutting,hoisting and fixing in position and applying a priming coat of red lead paint in gratings,framed guard bars,ladders,railing,brackets and similar type of work within all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing 2 milimetre thick mild steel sheet 14 gauge 15.69 Kg. per square metre including bending binding welding and bposition complete in all respect within all leads and lifts as per the direction of Engineer-in-charge.

Chiselling/wedging out of rock where blasting is prohibited in all kinds of earth within all leads and lifts as per the direction of Engineer-in-charge.

Manufacturing and supplying of chain hoist (Chain pully) of 2.00 metric tonne 3 metre high capacity confirming to IS:3832-1987 with grade 80 alloy steel lead chain tested to 25% over load with 10 metre chain lift operated within and down batropeon panel of INDEF/Deep (Heavy class) equivalent specification ISI mark complete as the satisfaction of Engineer-in-charge.

Ravinder Kumar

TANUJ SHARMA