Beautification of Devsar Town

Construction of Tile/Footpaths along the Main Road

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge

Providing /laying of stone soling handpacked in foundation trunches incld dressing watering compacting and all carriage up to site of work complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge(length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and laying cement concrete in kerbs, steps and the like at or near ground levelincluding curing, excluding the cost of centring, shuttering, and finishing, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Centering and shuttering including strutting, propping etc. and removal of form work for:foundations , footings etc

P/L 200 mm PVC Pipe of superior quality complete job .

Carriage of Materials by mechanical transport

Crushed stone aggregate from vessu for an average lead of 10 km

Sand from Vesho river for an average lead of 15 km

Retro-Reflective Place Identification Sign Boards ( 10 no. at Different Locations)

Supply and Fixing of Retro Reflective Double Sided Over Head Gantry Signage made out of Type-XI Micro Prismatic Type sheeting conforming to IRC:67:2012 & ASTM D 4956–09, covered with Electro Cuttable translucent film as per the drawing and display matter given by the engineer in charge, fixed over 4 mm thick aluminum composite panels and riveted using 6mm aluminium rivets to back support frame all round supported on a tubular gantry structure of 300 NB pipe with 6.3mm wall thickness as per the drawings attached. The MS tubular poles shall be painted with epoxy & minimum two coats of synthetic enamel paint. The Gantry sign boards shall be firmly fixed to the ground by means of properly designed foundation (as per the drawings) with M25 grade cement concrete. Installation work shall be as per relevant clauses of MORT&H specifications section 800 & IRC: 67:2012 complete in all respect. The rates shall include cost of design, fabrication, supply, transportation, local shifting, erection of signage structure using crane, all T&P, machine, material and labour required for proper completion of work as per the direction of Engineer. (Complete Job) As per Clause 22 of IRC 67-2012. Sub Detail of Place Identification Sign Boards A. STEEL WORK: Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Vertical Pipe Ornamental Pole of meter clear height

Basic Details Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Bolts, Nuts, Washer,Clips etc

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete Steel Structure Frame

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade New steel work (two or more coats).

Providing & Fixing of / ACP 4 mm thick sheeting providing & fixing of micro prismatic type XI sheeting as per IRC 67:2012 reflective sheeting of size including lettering and signs as applicable. ACP Sheet

EARTHWORK & FOUNDATION Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead up to 50 meters and lift up to 1.5 m, as directed by Engineer-in-Charge. In all kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations footings, bases of columns.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of cantering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Foundation

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level

Add provision for cartage / handling and packaging of the gantry.( Crane+Trailer)

Carriage of Materials by mechanical transport

Stone aggregate of 10 Km

Beautification of Imam Bada at Wangam in MC Devsar

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish beyond MC Limits-All kinds of soil.

Supply and laying of Stone soling hand packed broken stones in layers including carriage complete job.

Providing and laying in position cement concrete. All works upto plinth level 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) crushed.

Providing and laying in position specified grade of cement concrete excluding the cost of centiring, shuttering, finishing – all work upto plinth level. 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Foundation/mass concrete

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and paint all complete.

Providing and laying 60 mm thick factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Supplying, fabrication and installation of STAINLESS STEEL BENCHES, three seater superior quality satisfying all relevant codes.The cost shall incld. all applicable taxes, carraige upto site , leads and lifts, the foundation concrete in 1:2:4 mix, requisite earthwork, complete job in all respects to the satisfaction of Engineer in charge .

Providing and installation of pole mounted swing 3.5 feet height stainless steel TWIN dustbin of 50 ltr capacity including earth excavation and concrete mix of 1:2:4 in 2 feet 1 feet 1 feet excavated pit for fixing the same in position all complete with carriages and head load.

P/L 200 mm PVC Pipe of superior quality complete job .

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix. 1:1.5:3 (1cement: 1.5 coarse sand: 3graded stone aggregate 6 mm nominal size) reinforced with 7 nos. ( 3 nos horizontal and 4 nos vertical ‘U” shape ) M.s wires of 3.5 mm dia as per design, including required form work finishing with cement punning on exposed surface curing for specified period and stacking in required rows and height, all complete as per direction of officer-in-charge.Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mmIncluding filling Good Earth, necessary manure ,SHADY TREE and flooding with water.

Carriage of Materials by mechanical transport

Crushed stone aggregate from vessu for an average lead of 10 km

Sand from Vesho river for an average lead of 15 km

Beautification of Khanbarni Temple in MC Devsar

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:Lead upto 50m

Supply and laying of Stone soling hand packed broken stones in layers including carriage 50 M complete job.

Providing and laying in position cement concrete. All works upto plinth level 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) crushed.

Providing and laying in position specified grade of cement concrete excluding the cost of centiring, shuttering, finishing – all work upto plinth level. 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Foundation/mass concrete

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and paint all complete.

Providing and laying chisel dressed Devri Stone of size 300x200 mm facewith 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) uptoplinth level including curing.One face dressed7.44.1 Fine chisel dressed

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge.Made of G.I. wire of dia 4 mm.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.

Supplying/providing at site Good Earth i/c all Leads and Lifts Laying and Laying, spreading and compacting the Same in layers i/c Watering at OMC i/c Cost of Carriage Complete.

Supplying, fabrication and installation of STAINLESS STEEL BENCHES, three seater superior quality satisfying all relevant codes.The cost shall incld. all applicable taxes, carraige upto site , leads and lifts, the foundation concrete in 1:2:4 mix, requisite earthwork, complete job in all respects to the satisfaction of Engineer in charge .

Providing and installation of pole mounted swing 3.5 feet height stainless steel TWIN dustbin of 50 ltr capacity including earth excavation and concrete mix of 1:2:4 in 2 feet 1 feet 1 feet excavated pit for fixing the same in position all complete with carriages and head load.

P/L 200 mm PVC Pipe of superior quality complete job .

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix. 1:1.5:3 (1cement: 1.5 coarse sand: 3graded stone aggregate 6 mm nominal size) reinforced with 7 nos. ( 3 nos horizontal and 4 nos vertical ‘U” shape ) M.s wires of 3.5 mm dia as per design, including required form work finishing with cement punning on exposed surface curing for specified period and stacking in required rows and height, all complete as per direction of officer-in-charge.Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mmIncluding filling Good Earth, necessary manure ,SHADY TREE and flooding with water.

Carriage of Materials by mechanical transport

a. Crushed stone aggregate from vessu for an average lead of 10 km

b. Sand from Vesho river for an average lead of 15 km

Sitting Benches (20 Units)

Clearing site including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.

Providing and laying stone soling Hand Packed including carraige all

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (20mm nominal size)

Providing and placing 3 seater cast iron bench with arm rest, 5 feet long with back support

Landscaping of the Area

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by incharge

Providing and laying stone soling Hand Packed including carraige all

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Providing and laying of dry stone pitching 225 mm thick laid on slopes including cost of stones and preparation of surface. 24.1.1 Quarry stone

Grouting of stone pitching using M-10 nominal mix concrete (max. size of aggregates; 20mm nominal) @ 6.00 cum per 100 sq m on horizontal/side slopes; complete including curing

Supplying/providing at site Good Earth i/c all Leads and Lifts Laying and Laying, spreading and compacting the Same in layers i/c Watering at OMC i/c Cost of Carriage Complete.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish & surplus earth,17.14.4 Holes 45 cm dia & 45 cm deep

Supply and plantation of approved varieties of healthy , diseases free stout stem & well developed root system tree sapling of 5' - 6' height with a clear minimum height of 4' - 5' from basin/ ground level after plantation. Staking the tree sapling upto 3/4 height with appropriate strength of Bamboo stick.Lower 1 feet of stake portion should be treated with anti-termite chemical. AVENUE / FLOWERING / SHADY TREES

Maintance of tree sapling after plantation for 30 days or more as minimum guarantee period, for well establishment of tree sapling, stacking to be continued till tree sapling attains the stem strength, Replacement of sapling casualties immediately

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix. 1:1.5:3 (1cement: 1.5 coarse sand: 3graded stone aggregate 6 mm nominal size) reinforced with 7 nos. ( 3 nos horizontal and 4 nos vertical ‘U” shape ) M.s wires of 3.5 mm dia as per design, including required form work finishing with cement punning on exposed surface curing for specified period and stacking in required rows and height, all complete as per direction of officer-in-charge.Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mmIncluding filling Good Earth, necessary manure ,SHADY TREE and flooding with water.

Carriage of materials

Carriage of Sand 10 Km by MT

Electrification

Supply. Installation testing and commissioning of 3.0 meter ornamental decorative pole made up of galvanized steel fitted with cast iron embellishment polyurethane paint coated as per specifications. The pole shall have base plate firmly welded with required nut/ bolts), Inbuilt control/ Junction box having connection black, 4 pole connector, 3-6Amp. MCB and having sufficient space for loop in and loop out of cables. The pole shall Include decorative dual arm bracket and decorative ornamental translucent luminaries with 30/40W LED Inside having IP 65 protection. The job also includes 3 1.5 sq.mm PVC Insulated single core copper wire (complete job).

Providing and laying of Cement Concrete blocks of 1:2:4 mix, including earth work in excavation and its disposal within 50 meters lead, cost of formwork, curing and carriages of all required materials.

Supply, laying, connecting and commissioning of 16 sq.mm 2 core PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Aluminium LT cable, incld. cost of required at. thimbles/ lugs duly crimped.

Supply, laying, connecting and commissioning of 35 sq.mm 2 core PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Aluminium LT cable, incld. cost of required at. thimbles/ lugs duly crimped.

Supplying and laying of DWC HDPE (Double Wall Corrugated High Density Polyethylene) pipe, 63 mm dia (00-63 mm & ID -51 mm) ISI marked along with all accessories like sockets, bends, couplers, etc. with fitting and cutting, Jointing, etc. (under ground), including excavation and refilling the trench after laying the pipes. (complete job)

Supply, Installation, testing and commissioning of outdoor type compartmentalized, main distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with Internal wiring as required. The panel is to be provided with the following adjustable type controlling/protection switch gear devices: INCOMING 125A DP MCB 10 KA 01 no. 200 SP & N bus bar AL. Strips 01 set Digital meter and phase Indicators 01 Set Outgoing 32/40A DP MCB 10 KA 06 no.

Providing of chemical earthing as per IS standards by way of digging 6 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2" dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound

Providing spiral earthing to poles by using 10 SWG GI wire.

Timer Contractor with timer 32 Amp