GE/SMB/T-23/2021-22 REPAIR TO DRAIN CULVERT FOOTPATH AND ETC IN ZONE I UNDER GE SAMBA

Amount

Demolition of plain cement concrete in ground floors and paving n.exc 15 cm thickness (Below or above ground level), complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for , complete all as specified and as directed.

Cleaning sludge and mud etc of any type & in any position as in drains with an average depth 30 cm and 30 to 45 Cm in width as in foul smell. complete all as specified and as directed.

PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms moulds, mitred / stopped ends etc complete all as specified and as directed.

Demolition and breaking of pipes upto 450 mm drain pipes (Salt glazedware, AC or Reinforced concrete), complete all as specified and as directed.

Reinforced pipes 300 mm dia, class NP2, laid and jointed with collars, complete all as specified and as directed.

Reinforced pipes 450 mm dia, class NP2, laid and jointed with collars, complete all as specified and as directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches pillars etc complete all as specified and as directed.

Raking out joints/pointing to brick work in walls or to bricks on edges in floors, surface channels etc built in cement mortar,complete all as specified and as directed.

Brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 complete all as specified and as directed.

Brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 but except bricks.complete all as specified and as directed.

Brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

Brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 but except bricks. complete all as specified and as directed.

Walling of random rubble, or polygonal walling brought up to course well bonded, bedded and solidly hearted, built in CM 1:6 brought upto coourse, complete all as specified and as directed.

Exter over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc. 40mm, complete all as specified and as directed.

Flush plointing to brick masonry in CM 1:4,complete all as specified and as directed.

Flush plointing to stone masonry in CM 1:4,complete all as specified and as directed.

Taking down cement plaster on brick/concrete or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick/stone/ concrete surfaces in CM 1:4 and finished even and fair without using extra cement, complete all as specified and as directed.

Precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slabs (for drain & manholes etc) with plain faces, set in cement mortar 1:4 complete all as specified and as directed.

RCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs landing and similar work not exc. 200mm thick surface flat for rough finished surface of concrete complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) including fair finished surface complete all as specified and as directed.

Formwork to edges of concrete flats etc exc 10 cm but not exc 20 cm wide fair finished complete all as specified and as directed.

25 mm thick cement concrete 1:2:4, Type B-0 (12.5mm graded stone aggregate) as in sub-base of floor finished even and rough for laying tiles/Kota stone complete all as specified and as directed.

75mm for Cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub Base for Interlocking tiles or paver block etc hardstanding etc complete all as specified and as directed.

Machine pressed precasst concrete interlocking paver block any shape and any size confirming to IS-15658-2006 of 60 mm thickness, with grey cement and pigment, M-35 Grade over and including a layer of sand cushining 50 mm thick consolidate thickness, complete all as specified and as directed.

Machine pressed precasst concrete interlocking paver block any shape and any size confirming to IS-15658-2006 of 80 mm thickness, with grey cement and pigment, M-35 Grade over and including a layer of sand cushining 50 mm thick consolidate thickness,complete all as specified and as directed.

Prepolished Chequered cement concrete tiles 20cm x 20cm x 25mm thick/25cm x 25cm x 25mm thick, set, jointed with cement and pigments and pointed in neat cement slurry as in path etc over and including 15mm thick screed bedd in CM 1:4 complete all as specified and as directed.

PCC 1:3:6 type C-1(using 20 mm graded cr. stone aggr)as in kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, water troughs and like incl weathering, slightly rounded or chamfered aangles and throating complete all as specified and as directed.

40 mm thick PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) finished even and smooth using extra cement as in floor complete all as specified and as directed.

Glass dividing strips, 3 mm thick, 38 mm width inserted in position to confirm to design as in floor, complete all as specified and as directed.

110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

Prepration of new plastered surfaces of wall with chalk whiting and applying two coats of cement base paint complete all as specified and directed.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

SIDDAHANT ENTERPRISES

M/S DEEP KUMAR MALIA

Manminder Singh and Co

s k construction co

PARGAL CONSTRUCTION CO