Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC JHABRERA ROAD NEAR POWER STATION MANGLOR DISTT HARIDWAR UTTRAKHAND | MANGLOR | HARIDWAR | UTTARAKHAND | L1 | Accepted-AOC Lowest | |
| 2 | L2₹39.7 L+₹9.0 L (29.2%)Rejected-AOC | L2 | Rejected-AOC Not Lowest |
Tender Value
₹30.1 L
EMD Value
₹60,200
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 871 EWS
GE 871 EWS PIN 913871 C/o 56 APO
PROVISION OF BOUNDARY PILLARS AT HARSIL
2022_MES_567100_1
8702/E8
Open Tender
Civil Works
Item Rate
180 days
Harsil
As per tender documents
8 documents required · 8 mandatory
₹500
GE 871 EWS
₹60,200
Yes
6 Feb 2023
3 Dec 2022
12 Jan 2023
3 Dec 2022
5 Jan 2023
17 Dec 2022
Amount
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1. 5 m in depth and getting out in any type of soil complete all as specified and directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1. 5 m in depth and getting out in hard rock complete all as specified and directed.
M&L Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
S&F Mild steel TMT bars as in reinforcement 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F Mild steel TMT bars as in reinforcement 5 mm dia and over upto 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surfaces all as specified and directed.
Use & waste formwork to sides of pillars, column, posts, struts, piers; and similar work; fair finished surfaces of concrete square, rectangular or polygonal all as specified and directed.
M & L for RCC M-25 (design mix using 20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M & L for RCC M-25 (design mix using 20 mm graded stone aggregate) in pillars, column, posts, struts and piers complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed.
Removing excavated material soil n.exc. 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified.
M&L polished Agra stone of size 200mm x 200 mm x 25mm thick embedded and fixed with neat cement slurry in groves of same size as of stone made in concrete of RCC pillars all as specified and directed by Engineer-in-Charge.
M/s RAM RATAN AND SONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .