CONSTRUCTION OF INTERNAL ROADS OF VARIOUS GALI BY VACCUM DEWATERING SYSTEM (V.D.S.) AT DR.HEDGEVAR NAGAR SOCIETY IN F.P.NO.-78, F.T.P.S.NO.- 02(VESU-BHATHANAVESU), SOUTH-WEST(ATHWA) ZONE, SURAT.

SR. No. Item Unit Total Qty. Amount

Dismantling of structures on roadway,

including disposal of unserviceable material

and utilising the seviceable material free of

cost in permanent works as directed by the

Engineer with all leads and lifts etc.

a) Brick / Stone Masonary Cum 50.00 577.92

b) Plain Concrete Cum 16.00 639.72

c) Reinforced Concrete Cum 15.00 1,110.75

d) Bituminous Pavement Cum 82.00 288.65

e) Non Bituminous Pavement Cum 203.00 155.25

Preparation of subgrade with compacting.

levelling and consolidation of subgrade with

mini roller/plate vibrator machine including

watering and filling in depression which

occur during the process. including

labour,machinery, equipments required to

execute this item etc. complete as detailed in

tender specification & as directed by

engineer in charge.

Excavating the road surface upto required

depth including removing the excavated

materials and depositing on the road side

upto 50 mt. lead etc. complete. Including

labour, machinery & equipments require to

complete this item and as detailed in tender

specification & as directed by engineer in

4.0 Raising & Lowering Eixsiting Machine

holes (with frames) of drainage, storm

drainage, sewer trap chamber, scraper No. 24 573.66

machine hole frame & cover any utility

services up to newly carpeted/recarpeted

5.0 Providing & supplying heavy duty I.S.I.

mark RCC precast manhole frame with

cover at site as per design for circular

manhole complete. (A) for circular manhole

Providing and laying Granular Sub Base

(drainage layer) conforming to Grading V of

Table 400.2 of compacted thickness of

mm with specified graded stone metal and

sand mixed in pugmill and laid with

mechanical means spreading with motor

grader and compacting with vibratory roller

having minimum 80- 100KN static weight to

achieve desired density of 98% of MDD

including all material, labour, machinery

with all leads and lifts etc., complete.

Providing and laying 200 micron plastic

sheet on prepared sub base For V.D.S

Concrete as per instruction of Engg. In

7.00 charge etc. complete.(Market Rate) sqm 795.00 26.00

Providing and laying cement concrete 1:5:10

(1 cement 5 coarse sand 10 graded stone

aggregate of 20 mm nominal size) and

curing complete excluding cost of form work

8.00 and reinforcement for reinforced concrete in Cum 80.00 2,606.92

vertical and horizontal fins upto floor

two.including labour, machinery, equipments

required to execute this item etc. complete.

Providing & Laying 150 mm thick VDS

concrete pavement using M 20 (1:1.5.:3)

(1 cement : 1.5 sand : 3 graded stone agg.

9.00 20mm nominal size) & vaccuum dewatering Cum 115.00 5,981.00

technique including floating surface with a

skim powder floater, curing etc. complete.

(As per market rate )

Suplying & filling fine sand (pana) in

25/75mm (Avg.) compected thick over

the base including necessary

10.00 compaction, watering etc.complete. item Cum 16.00 480.00

includes levelling by using vibratory

plaes compacted machine as directed by

engineer in charge.

Providing interloking type rubber

moulded cement concrete paver block of

approved shape, design & colour having

60mm thickness (M-35) fixing on fine

sand bedding. Item includes levelling by

11.00 using vibratory plates compacted

machine. Item also includes all

materials, labours, equipments, tools

plants, watering. cleaning etc. complete.

Without colour sqm 230.00 524.00

WIth colour sqm 50.00 524.00

Providing and laying cement concrete

Precast kerb/ cast- in-situ kerb in M-20

grade concrete as per drawing

purchased from SMC's approved

Manufacturer' if precast kerb laying and

as directed by Engineer with all leads,

12.00 lifts etc. complete. RM 50.00 380.00

size M-20 grade pre cast Kerbs for

Fixing at edge of PQC as per

drawing and as directed by Engineer

with all leads, lifts

Providing, Laying and jointing on true

line and level UPVC pipe (SCH-40) line

of Prince/Supreme/Jain/

Astral/Tulsi/Finolex make including

fittings make or equivalent as approved

by angineer-in-charge. Pipe shall be

13.00 fixed on the wall the help of clamp at

every two meter C/C or shall be

concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

Providing and fixing brass ferrule of

approved make of following sizes

inclusive of all taxes, insurance,

transportation etc. complete.

Excavation for pipe line trenches for

water supply, sewerage line, manhole

etc. all with shoring and struting if

required as per required gradient and

including safety provisions using site

15.00 rails and stacking excavated stuff

including up to all required lead cleaning

the site etc. complete for all lifts and

strata as specified.

In all sorts of soil and soft murrum

(A) Upto 1.5 Mt. depth from G.L. Cum 119.00 102.35

Providing , Carting, Conveying,

16.00 Stacking,

(B) 250 mm Lowering,

Class)and Jointing RM 50.00 638.55

(C) 300 mm dia (NP3 Class) RM 0.00 891.85

Providing & construction simple

chamber of 23 cm. th' B.B. Masonary in

C.M1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix (

cement: 2 Sand : 4 Grade stone

aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top

etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single pipe

Extra for every additional depth of 0.1 mt

beyoung 0.45 mt 242.39

A) Same as above but Precast RCC

18.00 heavy duty Cover instead of C.I. Cover No. 24.00 2,681.76

Providing & Fixing U-PVC pipe (SWR)

confirming to IS

no. 13592 (Type "B") of Prince/

Supreme/ Jain/ Astral/

Tulsi/Finolex make for soil and waste

discharge system

at all floor levels incl. All fixtures like

19.00 bends, tees, shoe

etc. jointed with resin of approved brand

etc. comp. (M.R.)

Providing & laying in trenches

galvanized mild steel tubes (medium

grade) TATA / ZENITH / ASIAN /

JINDAL MAKE of the following nominal

20.00 bore & tube fittings etc. comp.

21.00 5 to 7 mm deep groove cutting at vds RM 205.92 50.00

Executive Engineer

South West (Athwa) Zone