Construction of New Building of Sub Centres and Group Centres under intensive Cattle Development Programme At.Bolundra, Ta.Modasa, Dist.Arvalli.

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including 192.20 Cum 157.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

2 Filling available excavated earth (excluding rock) in 177.20 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

3 Filling in plinth with sand under floors including watering 10.00 Cum 481.81

ramming, consolidating and dressing complete

4 Filling in foundation and plinth with murrum or selected 14.00 Cum 294.39

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

5 Providing and laying controlled cement concrete M.150 for 33.10 Cum 4376.33

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

(A) Foundations, footings,Base of columns and Mass

6 Providing and laying controlled cement concrete M.250 and 27.00 Cum 4714.99

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

(A) Foundations, footings, Base of columns and Mass

7 Providing and laying controlled cement concrete M250 and 4.00 Cum 8291.09

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

8 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 4.00 Cum 2936.68

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

9 Providing and laying controlled cement concrete M.250 and 13.20 Cum 6001.42

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

10 Providing and laying controlled cement concrete M.200 and 6.00 Cum 8172.43

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

11 Providing and laying controlled cement concrete M.200 and 5.00 Cum 6030.34

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

12 Providing and laying controlled cement concrete M.200 and 11.40 Cum 6605.11

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

13 Providing and laying controlled cement concrete M.200 and 2.00 Cum 6369.58

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

14 Providing TMT Bar FE 500D reinforcement for R.C.C. 6914.00 Kg. 77.29

work including bending, binding and placing in position

complete for All Floor

15 Brick work using Common Burnt Clay building bricks 56.90 Cum 4495.99

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

16 Providing & Fixing Chicken mesh for joint between brick 17.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

17 Providing 15mm thick cement mala plaster in single coat on 317.80 Sqmt 241.38

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

18 Providing 10mm thick cement mala plaster in single coat on 87.00 Sqmt 215.30

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

19 20mm thick sand faced cement plaster with Gutka Finish on 252.80 Sqmt 321.10

walls upto height 15 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement :

1-sand) with 5mm grooves, etc. complete.

20 Applying two coats of putty & two coats of primer of 279.00 Sqmt 40.59

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

21 Wall painting (three coats) with plastic emulsion paint of 192.00 Sqmt 125.52

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

22 Ceiling painting (three coats) with plastic emulsion paint of 87.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

23 Finishing wall with weather proof exterior emulsion paint 347.60 Sqmt 93.93

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

24 Providing and laying polished Blue Kota stone slab flooring 47.00 Sqmt 1019.00

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1:1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

25 Providing and laying polished Blue kota stone slab 25mm 2.00 Sqmt 1166.93

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing etc.

26 P & L Mate Finished Antiskid Ceramic 10 mm thick tile 3.00 Sqmt 1266.54

flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

27 Providing and laying coloured glazed tiles of the size 300 37.00 Sqmt 1487.88

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

28 Providing and fixing Machine cut, Free edges, Mirror 2.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) for Trade & Riser including Half Round

moulding front edge of trade jointed with grey cement

slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

29 Providing and fixing Machine cut, Free edges, Polished 14.00 Sqmt 2510.86

Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

30 Providing and fixing Machine cut Bothside mirror polished 3.00 Sqmt 618.12

kota stone in single piece (Max 150 cm long and width upto

45 cm with both side polished) for horizontal Shelves

including makng grooves & Fixing the same in Brick/

concrete wall finished with flush pointing, round open edge

31 Providing and laying water prooofing treatment with china 72.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

20 mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

32 Providing and fixing flush door with Single shutters, solid 7.00 Sqmt 4211.70

core construction with frame of Anodized Alluminium

section (weight not less than 1.1 kg/mt.) with cross board

and finished with 1 mm thick laminate on both side of

shutter, machine glued PVC beading on periphery including

30cm long Stainless Steel Pipe handle on both side SS

ASIS 304 grade, SS Stopper 20cm, SS Aldrop 30cm both

side, anodised alluminium butt hinges with necessary

screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

33 Providing and fixing flush door with Double shutters, solid 3.00 Sqmt 4720.74

core construction with frame of Anodized Alluminium

section (weight not less than 1.1 kg/mt.) with cross board

and finished with 1 mm thick laminate on both side of

shutter, machine glued PVC beading on periphery,

including 30cm long Stainless Steel Pipe handle on both

side SS ASIS 304 grade, heavy duty Floor Spring each side,

SS Stopper 20cm, SS Aldrop 30cm both side, anodised

alluminium butt hinges with necessary screws. (B) Non-

decorative type and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm thick.

34 Providing and fixing window having extruded aluminum 6.00 Sqmt 1713.70

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.

35 Providing and fixing Standard extruded colour anodized 1.00 Sqmt 1368.55

alluminium section frame weight 1.094 kg/Rmt.with

Adjectable Glass Louvers of 5 mm thick transparent glass

colour tinted float glass with transparent silicon gasket with

allu. Powder coated fittings & fixtures.

36 Providing & fixing M.S. Grill using 16 mm dia. M.S. Bars 13.00 Sqmt 3268.36

@ 15 cm C/C fixed in frame using angle 35mm x 6mm,

35mm x 6mm flat in center, and Galvanized wire mesh jali

20mm x 20mm spacing, including red lead primer coat and

two coats of oil painting etc. complete.

37 Providing erecting and fixing double coated ISI water tank 2000.00 Litre 3.95

of required capacity each with all necessary fittings and

connection etc. complete on terrace

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

38 Providing, laying and jointing in true line and level 110 54.00 Rmt 876.12

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

39 Providing, laying and jointing in true line and level 160 5.00 Rmt 834.38

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

40 Providing laying and jointing in true line and level 40mm 20.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. laying and jointing in true line and level 25mm

41 Providing 20.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. laying and jointing in true line and level 15mm

42 Providing 30.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

43 Providing and fixing concealed center point to wall ceiling 20.00 Rmt 253.82

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 25 mm.

44 Providing and fixing concealed center point to wall ceiling 20.00 Rmt 170.36

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 15 mm.

45 Providing and fixing Gun metal check or non-return fullway 2.00 Nos. 663.43

wheel valve.(E) 40mm dia.

46 Providing and fixing ball cock of approved. quality as 1.00 Nos. 189.84

directed.(A) Copper Metal (ii) 50mm dia.

47 Providing and fixing wash down water closet (Wall Hung 1.00 Nos. 5172.51

type, W.C. Pan) with integral P or S trap, Health Fauset

Heavy Duty with hook and PVC dual flush tank with

complete fittings including jointing the trap with soil pipe

in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and

cover to be measured and paid for separately)(A) vitreous

China Pattern :(i) in white colour

48 Providing and fixing washbasin (ii) Flat Back washbasin 1.00 Nos. 2180.72

550 mm x v 400mm size. (i) In white colour including with

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved

brand with connection 15mm dia flexiable pvc pipe etc.

49 Providing and fixing brass screw down stop tap.(A) 15mm 5.00 Nos. 205.83

50 Providing and fixing PVC SWR Nahni trap IS 14735 for 2.00 Nos. 586.60

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls.

51 Providing and fixing S.W. gully trap with C.I. grating brick 1.00 Nos. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

52 Providing and fixing C.P. brass towel rail comlete with C.P. 1.00 Nos. 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

53 Providing and fixing in position PVC cowel went to pipes 1.00 Nos. 101.00

54 Applying general insecticide pest control treatment to 104.00 Sqmt 80.62

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -

II( (0.075% concentration by mass) is recommended 10.5ml

chemical diluted with 5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended as per I.S.

55 Providing and fixing Safety Grills of required pattern for 162.00 Kg 110.60

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

56 Providing, Fabricating, supplying, and ercting Parking Shed 15.00 Sqmt 5504.50

of required size and shape (as per site conditions and

Engineer in charge's Direction), including all necessary civil

and structural works. The Shed shall be made of M.S.

tubular/structural steel sections (confirming to IS standards)

with proper welding, bolting, and fixing arrangement.

57 Providing and Casting in situ controlled Cement Concrete 65.00 Cum 4553.38

M-200 for R.C.C. Raft and cutt-off walls including

necessary shuttering laying, vibrating, ramming and curing

58 Brick work using common burnt clay building bricks having 48.90 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

59 Providing and fixing 1.20 Metre high fencing with 2.0 64.00 Rmt. 391.93

Metre long M.S. Angle posts 40mm x 40 mm x6 mm and

oil painting 3 coats fixed at 2.5 Mt,C/c. with five

Horizontan lines and two diagonals of galvanised steel

barbed wire weighting 9.38 Kg. per 100 Metre, strained and

fixed to posts with G.I,staples including fixing the posts in

ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

60 Steel work, welded in built up sections framed work 1.80 Quintal 9108.49

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

61 Drilling of pilot bore hole of size 250/300 mm diameter at 100.00 Rmt 1544.29

above site by mud finish direct rotary rig etc. complete

62 Reaming of 250/300 mm diameter pilot bore hole to size 15.00 Rmt 742.35

450 mm diameter including assembling, lowering housing,

casing strainer pipes with gravel packing and clay ball

packing etc. complete.

63 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X

64 Supply of 200 mm diameter V-wire screen pipe of slot size 22.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

65 Supply of M.S. Bore clamps with 3 holes on either side 1.00 Pair 1753.36

with nuts and bolts of standard make and suitable size (g)

750 mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

66 Supply of Bore Plug having 100 mm height made from 1.00 Nos. 834.26

M.S. plate with 3 holes at equal distance on circumference

for nuts-bolts type, locking arrangement with nut-bolts &

lock nuts of standard make complete. (b) from 5 mm thick

M.S. plate (for top also) (ii) suitable for 200 mm dia. pipe.

67 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

68 Supply of Steel Bent plates suitable to ERW pipe for (b) 8.00 Nos. 71.71

200 mm diameter and 150 x 150 x 6 mm size etc. complete.

69 Supply of Gravel of size selected size up to 4mm to 6 mm, 6.00 Cmt 2295.73

including stacking and filing etc. complete.

70 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

71 Providing and erecting PVC corrugated Flexible conduit 50.00 Rmt 26.26

with required numbers of coupling, PVC bushes, Check-

nuts etc. complete of following sizes. (3) 32 mm diameter

72 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking

of threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B) Above

60 mtr and up to 120 mtr

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

73 Supplying and erecting approved make motor control 1.00 Each 8710.24

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON-OFF isolator (AC - 3/23 duty) main

fuses, single phasing preventer, indicating lamps for R-Y-B

phases, overload relay, automatic water level controller,

Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor &

overload relay, start-stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L&T, Seimens or

BCH make only (a) DOL upto 7.50 H.P.

74 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 70.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

75 Providing laying and jointing in true line and level 50mm 60.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing butterfly valve of IS approved brand

76 Providing 2.00 Nos. 1595.80

77 Excavation for foundation for depth from 1.5 m to 3.0 m 8.00 Cum 287.47

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C)

78 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 3.00 Nos 958.17

size having weight not less than 35Kg.

79 Clearing and grubbing road land including uprooting rank 0.10 Hectare 28455.10

vegetation grass bushes, shrubs, sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

80 Earthwork for embankment including breaking clods, 1863.00 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

81 Rolling and consolidation of soling including filling in 950.00 Sqmt. 22.75

depression which occur during the process, with power roler

8 tonne to 12 tonne..

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

82 Box cutting the road surface to proper slope and camber for 34.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

83 Providing, laying, spreading and compacting stone 12.00 Cum 2008.30

aggregates of specific sizes to water bound macadam

(Grade-II) (B.T. Metal of size 45 to 63 mm) specification

including spreading in uniform thickness, hand packing,

rolling with 3 wheeled steel/ vibratory roller in stages to

proper grade and camber, applying and brooming requisite

type of screening/ binding Materials to fill up the interstices

of coarse aggregate, watering and compacting to the

required density.

84 Compaction and finishing of cement concrete road by 75.00 Sqmt. 72.72

trimix process providing extra labour charges for the trimix

vaccum dewatering service process on cement concrete road

surface by using vaccum dewatering pump floater surface

vibrator including making rough finish to surface as per in

including levelling the complete.

85 Supplying of yellow or Goradu soil with all lead and lift 15.00 Cum 505.00

including spreading watering dressing and rolling with hand

roller etc complete selected soil

86 Supplying of well rotted FYM manure with all lead and lift 1.00 Cum 378.75

including spreading mixing dressing and rolling with hand

roller etc. complete

87 Scarifying the surface of soil including spreading of DAP 50.00 Sqmt. 26.26

fertilizer mixing with soil properly leveling ground dressing

88 Supplying and planting Dibbling semi carpet lawn at 50.00 Sqmt. 90.90

distance of about 15 cm x 15 cm after proper anti termite

treatment and rolling the same by hand roller and watering

89 Bowling and developing flowering plants grown in nursery 4.00 Nos. 80.80

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Jasud

90 Bowling and developing flowering plants grown in nursery 3.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Croton

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

91 Bowling and developing flowering plants grown in nursery 2.00 Nos. 101.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Golden Durenta Varigated

92 Bowling and developing flowering plants grown in nursery 2.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

93 Bowling and developing flowering plants grown in nursery 5.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

94 Labour charges for planting various plantsafler proper anti- 16.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

95 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

96 Rubber Hose Pipe 15 mm dia of approved brand and make 20.00 Rmt 90.90

97 Excavation for foundation upto 1.5 m depth including 8.00 Cum 122.99

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

98 Providing & Laying Rain Water Junction Chamber of Clear 1.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

1.06 x 1.06 RCC M200 top slab of thickness 0.15m with

TMT steel and 455mm x 610mm cast iron manhole cover

with frame weight not less than 35 kg as per directed by

Engineer-in-charge.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

99 Providing & Laying Filter chamber of brickwork 0.23 thick 1.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m

and excavation dimension of 2.80m x 1.96m x 1.35m

including C.C. M200 Bed Concrete 0.15m thick and RCC

M200 Top slab of thickness 0.15m with TMT steel,

Including 15mm (1:4) thick cement plaster inside & outside

with Cement slurry & top cover with frame of minimum

weight of 35kg, including filling filter material of 200mm

thick each layer of 25-40mm, 10-20mm of BT metal and

sand as per directed by engineer-in-charge

100 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation

in any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

101 II) Fire Extinguisher and Exit Signages Supply, 2.00 Nos. 6447.84

installlation, testing and commissioning of Carbon Dioxide

(CO2) type Fire Extinguisher of 4.5 kg confirm to IS:15683,

with ISI marked / TAC approved fitted with required

accessories including wall suspension brakets.

102 Supply, Installation, Testing & Commisioning of ABC type 2.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

103 Excavation for foundation upto 1.5 m depth including 9.00 Cum 272.57

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

104 Excavation for foundation for depth from 1.5 m to 3.0 m 3.00 Cum 498.93

including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

105 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 1.00 Cum 2566.77

fine sand : 10- graded brick bat aggregates 40mm nominal

size) and curing complete excluding cost of formwork in

(A) Foundation and Plinth

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

106 Half brick masonry in common brunt clay building bricks 8.00 Sqmt. 618.79

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (B) Conventional

107 Providing and laying cement concrete flooring 1:2:4 (1- 4.00 Sqmt. 352.01

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

108 Providing 15mm thick cement plaster in single coat on 32.00 Sqmt. 184.78

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

109 Providing and Laying ordinary cement concrete 1:2:4 (1- 1.00 Cum 6888.15

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc.

complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness

110 Providing and laying (to level or slopes) and jointing with 5.00 Rmt 317.48

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

111 Providing and Constructing sock pit of 2.46 mt. dia outside 1.00 Nos 30914.08

and 5 mt depth with honey combed masonary 6.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia

& C.I. cover and cowel vent etc. comp

112 Point wiring for Light / Bell with 2-1.5 sq.mm & 10.00 Pt 485.81

earthwire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete CAT-III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

113 Point wiring for Light / Bell with 2-1.5 sq.mm & 2.00 Pt 242.91

earthwire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete CAT-III BATH / W.C. /TOILET Cat - III

114 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 4.00 Pt. 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multistrand copper wires, in below

type of pipe erected with 6A Modular type switch and hum

free EME four or more step type electronic fan regulator

with separately mounted and accessories with earth

continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete CAT-III

115 Point wiring for Looped Plug with 6A Modular type switch 3.00 Pt. 257.55

& 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured / metallic

front plate modules erected on / in wall / ceiling with

following type accessories Cat.III

116 Providing following type of Modular Type Accessories 1.00 Ea. 160.59

mounted with pvc / metallic/Wooden box, single mounting

base frame covered with textured / metallic front plate

modules erected with necessary connection. As desired by

Engineer In charge (3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III

117 Providing following type of Modular Type Accessories 1.00 Ea. 160.59

mounted with pvc / metallic/Wooden box, single mounting

base frame covered with textured / metallic front plate

modules erected with necessary connection. As desired by

Engineer In charge (3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III (8) Modem Jack for Computer

Open RJ-45 Cat.III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

118 Providing following type of Modular Type Accessories 5.00 Ea. 180.79

mounted with pvc / metallic/Wooden box, single mounting

base frame covered with textured / metallic front plate

modules erected with necessary connection. As desired by

Engineer In charge (3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III (9) 16 Amp. SP one way switch

119 Providing following type of Modular Type Accessories 5.00 Ea. 199.98

mounted with pvc / metallic/Wooden box, single mounting

base frame covered with textured / metallic front plate

modules erected with necessary connection. As desired by

Engineer In charge (3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III (10) 6/16Amp. Universal socket

120 Providing and erecting ISI mark Medium class RIGID PVC 150.00 Mtr 33.33

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (c)

121 Providing and erecting Mains with 1.1 KV grade FRLS 222.00 Mtr 82.82

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm

122 providing and erecting Mains with 1.1 KV grade FRLS 20.00 Mtr 236.34

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe and

accessories (c) 2 wire 10 sq. mm

(use earth wire of 4 sq.mm )

123 Supplying and erecting Flexible PVC insulated multistrand 10.00 Mtr. 46.46

multicore 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. e) 1.50 Sq.mm

core round PVC sheathed

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

124 Supplying & erecting Delton or approved make Telephone 20.00 Mtr. 20.20

Cable electrolytic copper conductor PE insulation twisted in

two pairs, & wrapped with FRLS PVC tape & sheathed

with FRLS PVC or HFFR outer Jacket suitable for

telephone wiring & confirming to C-DOT erected in

existing pipe. of following size of conductors & nos.of

pairs. With necessary connections. [A] Conductor Size

mm (a) Unarmoured 2) Two Pairs

125 Supplying & erecting approved make LAN cable of 20.00 Mtr 47.47

following size in existing pipe as per direction [B] CAT -

126 Providing & erecting main Distribution (MDF) indoor type, 1.00 Ea. 994.85

back mounted frame. (a) Suitable for 10 pair

127 Providing & erecting Switch board for Computer or 1.00 Ea. 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with

necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat.

128 Decorative call bell Ting-tong box type 250 volts complete 1.00 No 71.71

129 Supplying and erecting LED indoor fittings with LEDs of 9.00 Ea. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A) Tube Light

with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

130 Supplying and erecting led lamps with following wattage 1.00 Ea. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 ((A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (II) 5 to 8 watts

131 Supplying and erecting LED street light / Flood light 4.00 Ea. 5194.43

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) Flood Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

above 48 to 60 Watts Cat-lll

132 providing and erecting Miniature circuit breaker single pole 4.00 Ea. 270.68

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

133 providing and erecting Miniature circuit breaker single pole 12.00 No 112.11

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III

134 Providing & erecting 240 V MCB double pole switch for 3.00 Nos 295.93

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat.III

135 Sheets steel powder coated enclosure suitable for 1.00 Nos 176.75

incorporating One/Two nos. MCB.

136 Providing and erecting Sheet Steel powder coated MCB 1.00 Nos 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing(b) sheet

steel double door (IP-43) (iv)12 way

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

137 providing and erecting Approved make RCCBs conforming 1.00 Nos 1969.50

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (i) 25 Amps.DP

138 Providing and erecting Annealed bare Copper wire 8 to 16 2.00 Kg. 794.87

139 Supplying & erecting earth pit of minimum bore dia.150mm 1.00 Nos 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

140 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 120.00 Mtr 79.79

cable Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of

following size of cables. (a) 2 core 4 Sq. mm

141 Providing and, fixing heavy duty flange type brass cable 8.00 Nos 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (B) 2 to 4 core 6 Sq. mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

142 Solderless crimping type Aluminium lugs conforming to IS 32.00 Nos 6.06

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

143 Providing and erecting Approved make Ceiling fan with 4.00 Nos 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

144 Supplying and erecting 19 / 20 mm. nominal bore Medium 4.00 Nos 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

145 Supplying & erecting fan hook box of 10 mm M.S. round 4.00 Nos 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

146 Providing 2.5mm.thick laminated acrylic sheet to cover the 4.00 Nos 18.18

fan hook or Fan box.

147 Providing & erecting fresh air fan 250 mm dia with square 1.00 Nos 1559.44

frame make of ABS body with louvers CAT-II

148 Supplying & erecting approved make SMC press moulded 4.00 Ea. 476.72

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.(H)

300mm x 200mm x 135mm [deep] (C)150mm x 125mm x

149 Supplying and erecting B class Galvanized iron pipe having 4.00 mtr 180.79

smooth finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following.(A) 25 mm dia

150 Providing and erecting water cooler having storage capacity 1.00 Ea. 49559.69

80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by

15˚ C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary inlet &

outlet connection. The body of water cooler will be made

from Stainless Steel. ◦

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

151 Providing & erecting open well type horizontal mono block 2.00 Nos 9613.18

pump set with stainless steel body having following

specification (C) 1 H.P. single phase open well motor pump

set suitable for 185 LPM discharge @ 25 mtr. head,

suitable for 32 mm dia. Delivery pipe with control

152 Supplying and erecting Direct - On - Line Starter with 18 A. 2.00 No 2100.80

rating contactor and with 3.5 Amp. 18A range directly

operated in totally insulated elegant enclosure for single

phase operation up to 3 HP as per IS 13947 complete

erected on P.W. Block with necessary connection. Cat-lll

153 Lowering of submersible motor pump set at the depth of 2.00 Job 856.48

following ,complete with required. Nos. and size of casing

pipes erected by means of proper chain pulley block & pipe

wrenches after checking of threads of each pipe with

coupling to take the load of the pump set and pipe assembly

filled up with water (D)For Open well Horizontal

submersible pump set for sump well (i) 1 HP to 5 HP

154 Providing and erecting ISI marked PVC insulated PVC 30.00 Mtr 104.03

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (B) 3 Core x 2.5 Sq. mm.

155 Providing Water proof straight Joint in PVC insulated flat 2.00 ea 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

156 Supplying of following size of STANDARD UPVC column 20.00 Rmt 179.78

pipe with coupler and wire lock[B] 32 mm dia

157 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 462.58

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe

as directed by Engineer - in - charge with necessary

plumbing as desired.[B] 32 mm dia

Total Cost of Construction Cost

(Rupees Thirty Seven lakh Twenty Three Thousand Seven Hundred Thirty Six and Ninety Paise Only)

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…3723736.9 Put to tender Rs.3723736.9

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

4 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5 Dismentalling of Credit materials amounting of Rs. -0.00 must be recovered from Contractor's respective R.A.

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division