AS AND AS AND PERMANENT REAPPROPRIATION OF BUILDING NO P-96 AT SVN COLONY VISAKHAPATNAM

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using old size bricks complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

25 mm Thick PCC 1:2:4 type B0 (using 12.5 mm graded crush stone aggregate) as in sub base of flooring including demolition of old PCC floor complete all as specified and directed

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick ,area of each tile exceeding 0.18 sq m but not exceeding 0.38 Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) for backing of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350 x 450 x 7 to 9 mm thick on vertical surfaces such as skirtings, dados and risers for steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing of 10mm thick in cement mortar 1:4 complete all as specified and directed.

M & L for RCC 1:11/2:3 type A1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for RCC 1:11/2:3 type A1 using 20mm graded stone aggregate as in beams, cantilevers, lintels over 1.5 m span complete all as specified and directed.

Mild Steel TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Mild steel TMT bars but 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to to soffits of uspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, lintels and similar work for fair finished surfaces of concrete flat complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces mixed with and including cement water proofing @ 2% by weight of cement finished even and smooth with out using extra cement including taking down of old plaster complete all as specified and directed. Note: supply only WPC shall be measured and paid seperately.

M & L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement including taking down of old plaster complete all as specified and directed.

Supply only integral water proofing compound conforming IS 2645-1975 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed.

M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M & L for 2nd class hardwood 35mm thick, factory made plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically presure treated fitted to chowkats complete all as directed.

Factory made uPVC white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (112mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Anodised aluminium Deco grill DG 104 or equivalent, 7 mm thick , (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Aluminium body Door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed to aluminium door complete all as specified and directed.

200mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and as directed .

S & F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed.

150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

150mm Extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed .

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of size 125mm complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

Mild steel hold fast made out of MS flat iron for chowkats and other small articles including making shape, drilling holeconforming to Fe-290 Gde-E-165 complete all as specified and directed.

Plain cement concrete type C1 (1:3:6) (using 20 mm graded crushed stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast, bed plates and the like including necessary form work, weathering, slightly rounded or chamfered angles and throating as required complete all as specified and directed.

Preparing surfaces of wood and wood based materials, of any description and girth not otherwise described, and treating backs of Chowkats, area tarred exceeding 0.1 Sq. M and not exceeding 0.5 Sq. M each with tar or coal tar black paint complete all as specified and directed..

Preparing surfaces of , steel and iron work new or old, of any description and girth not otherwise described, and treating small articles such as holdfasts, area not exceeding 0.1 Sq. M each with tar or coal tar black paint complete all as specified and directed..

18mm thick plywood BWR grade type BB fixed with nails for working table/storage almirah to the size and pattern as directed by Engr-in-charge.

Decorative laminate 0.90 mm type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Ist class Hard wood plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face of sectional area not exceeding 6 Sqcm complete all as specified and directed.

Brass hinges 100mm size extruded with stainless steel pin type D-11 complete all as specified and directed.

Brass cup board lock 75mm size 4 level with duplicate keys complete all as specified and directed.

Brass handles extruded fabricated type 100mm size complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry spron using chemical emulsion @ 2.25 ltrs per liner metre incl drilling and plugging holes etc in apron complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortor 1:2 (1cement : 2 sand) to match the existing floors complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact to wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 1.5mm centre to centre and sealing the same complete all as specified and directed.

preparation of newly plastered or previously untreated surfaces of walls and applying 3mm thick cement based wall care putty for making good undulations to obtain smooth surface and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

Complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces of walls with necessary safety measures i.e.scaffoldings/ hanging platform etc complete all as specified and directed

Excavating in post holes (or similar holes) in hard/dense soil each not exceeding 0 .50 cum, getting out ,returning filling in if required and ramming earth complete all as specified and directed

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundations filling and mass-concrete complete all as specified and directed .

Steel tubular work in trusses etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St - 240 complete all as specified and directed

Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors,ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290 Gde-E-165 complete all as specified and directed.

Mild steel posts(angular/square) and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165

Mild steel round bars but 5mm to 10 mm dia dia cut to length, bent to shape required in spacers and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel screw bolts ( machine made ) with hexagonal or square heads at one end & screwed the other , or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nuts exceeding 5cm but not exceeding 10 cm long, 11 to 15mm dia of shank complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Fixing only chain link fencing including provision of line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including binding wire complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type weight should not less than 4 kg/sqm complete all as specified and directed

75mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in sub base, plinth protection laid in alternate bay finishes even and smooth surface without using extra cement complete all as specified and directed.

75 mm thick PCC type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in flooring complete all as specified and directed

Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed

MR ENTERPRISES

KUNDAN SAI ENTERPRISES