Construction of Infrastructure for Housing and Installation of Conveyor type Hot Air Drier at Telkoi TRCS, Keonjhar.

Amount

Earth work excavation of foundation in hard soil or gravely soil within 50 m. Initial lead and 1.5 m initial lift including rough dressing and levelling the bed and depositing the excaveted earth away from site and as per the direction of Engineer In-Charge.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in F&Pwith cost, conveyance, royality etc complete

Fly ash Brick Masonery in C.M ( 1:6) in S/Swith cost, conveyance, royality etc complete

R.C.C work ( 1:1.5:3) with 12 mm size chips including cost, conveyance etc complete

Column Footing (M25)

Column (M20)

Plinth Band (M20)

Lintel (M20)

Roof Beam (M20)

Chhaja (M20)

Roof Slab (M20)

Cutting bending and binding of M.S or Tor rod and tying the Grills etc complete

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete

16mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete.

Supplying Fitting and fixingwindow grills , shutters etc complete

Providing ,fitting & fixing of AL doors with amodissed AL door section of 9202 as vertical member,9201 as Top member and 9200 as bottom & meddle member with 12mm thick prelaminated Nova pan Board fixed in Door frame with frame section No.9221 and tapered clip No.1660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour & materials.

S/F/F of window (sliding type) made up Alluminium section 9778 as window frame,section No.4095,4096 & 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement all fitting cost of glass complete smoth.

Fixing Vitrified tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Distempering Wall painting two coats with 100% Acrylic emulsion paint (1st quality) grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over required putty & 2 coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Two coat Weather coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over required putty & 2 coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Putty require coats with any approved shade including cost conveyance royality etc complete as per direction of EIC

Painting two coats of enamel paint over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

Electrification work

PRADEEP KUMAR NAYAK

BULU NAIK