Loading…
Loading…
Tender Value
₹20.9 L
EMD Value
₹20,865
Closing Date
16 Jun 2026, 5:00 pmDue tomorrow
EXECUTIVE ENGINEER, PRI DIVISION, MACHILIPATNAM
MACHILIPATNAM
Construction of Community Hall in Ayyanki Village of Movva Mandal. EST. COST:Rs.25.00 Lakhs
945222
Nit No.04/TO/2026-27, Dt:02.06.2026 of Executive Engineer, PR I Division, Machilipatnam
OPEN - NCB
Buildings
KRISHNA
7 documents required · 7 mandatory
₹739
₹20,865
9 Jun 2026
9 Jun 2026
9 Jun 2026
Augoring and boring of holes in site and under reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with augoring and boring equipment as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of different diameter , inclding VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , seigniorage charges for finished item of work, including centering, shuttering. 300mm dia3.50mts depth
VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Caping Beam.
VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beam.
VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Columns.
VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Roof Beams.
VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for 125mm thick Roof Slab.
VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Lintels.
VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Sunshades of 0.60m wide and 75mm thick at fixed end and 50mm thick at free end (SUNSHADES)
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 12mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Basement
Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls
Filling with sand in trenches, sides of foundation and basement with intial lead in laers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidential, labour charges, hire charges of T&P etc,. complete for finished item of work (APSS NO.309 and 310).
Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)
Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials.
Providing skirting to internal walls to 15 cm height/risers of steps with Double charged Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work
Flooring with Non Skid ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work
Providing dadooing to internal walls to 15 cm height/risers of steps with 7.30 mm thick Ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work
Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure -
OrnamentalPlastering with CM (1:5)8mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure -10Sqm
Cost and supply of HYSD bars including cost and conveyance of work spot and fabrication charges fo steel like cutting rods, tying grills placing in position including cost of binding wire etc., complete.
Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls
Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for exterior walls
Cost supply and fixing of Teak wood Door of size 1.20x2.10 M with necessary fittings etc. complete
Supply and fixing of Flush Door shutter of size 1.20 x 2.10mt with block board type with commercial ply on both faces (lipping): 30 mmthick with frame made of sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges and fixers as per specifications (APSS NO.1001 & 1002)
Providing and fixing factory made UPVC white colour SLIDING glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chambered frame andmullion (whereever required) extruded profiles dulyreinforced with 1.60± 0.2 mm thickgalvanizedmildsteelsectionmadefro mrollforming processofrequiredlength(shape&sizeacc ording to uPVC profile),uPVCextruded glazing beads of appropriatedimension, EPDM gasket,G.I fasteners100 x 8 mm size for fixing frame tofinishedwall,plasticpackers,plasticcaps and necessary stainless steelscrewsetc.Profile of frame shall be mitred cut and fusionwelded at all corners, mullion(ifrequired) shall be also fusion weldedincluding drilling of holes forfixinghardware's and drainage of wateretc. After fixing frame the gap betweenframe and adjacent finished wall shallbe filled with weather proofsiliconsealant over backer rod ofrequired size and of approved quality,allcompleteasperapproveddrawi ng &direction of Engineer-inChargeinclusive ofcost ofSingle / doubleglasspanesandsiliconsealant. Note:ForuPVCframe,sashandmullionextr uded profiles minus 5%tolerance indimension i.e. in depth & width of profileshall be acceptable.Variation in profiledimension in higher side shall beacceptedbut no extra payment on thisaccountshallbemade
Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete.
Cost and supply of RCC jallies BMS-W-16
Cost and supply of Stainless Steel Railing including cost and conveyance to work spot and fabrication charges of steel like cutting roads,welding grills palcing in Position etc.complete
Cost and supply of Opening stone or name board
Electrification Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Make: Sudhakar/ Maco Plast / Modi
Supply and Fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned TW box including all labour charges etc., complete, Make Sudhakart Maco Plast/Modi
Supply and run of 1 of 14/0.3mm (1.0 Sqmm) FR/FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable in existing pipe for earth continuity induding cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc complete as directed by Engineer in Charge.
Supplying & run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge
Supply and fixing of batten holder/ slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 5W LED bulb (for new installation).
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., comp Make Finolex/RR Kabel/ΚΕΙ
Supply and foxing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc. complete Makes Anchor Penta chery Gold Medal Olive /Million Zoom
Supply and Fixing of 16A 3pin and 6A 3pin plug socket with and 16A switch control duly recessed in wall with MS switch deep box of 6 x x2 1/2" size covered with hylam sheet Including earth connections and all labour charges etc. complete. Plug Socket 496-54
Supply of Mini Modular Stepped type Electronic Regulator with Cover Frame for Ceiling fans 900/1200/1400mm sweep complete erected on existing board including cost of all materiais, all taxes, conveyance to site and all labour charges for all operations etc. complete as directed by Engineer in Charge.
Supply & Fixing of 1200mm (48") sweep 230V, AC 50 Hz. ceiling fan with 3 blades and double ball bearings with all standard accessories including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge
Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220-260 Volts, with high power LEDs, having System Efficacy of >100 lumens/watt, PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty, Makes: As per list of recommended brands as category 1.
Supply and erection of3 phase meter board with 18'x30' peeta board with 3 No 100A 415 V fuse unit and 32A standard make switch disconnector fuse unit complete as directed by the Engineer in charge
Supply and fixing SPN Distribution board with IP-43 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.
Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class Gl pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
Supply and Transportation and errecting of 1 HP Single phase Mono block Cl body motor pumpset confirms to IS 9079:2002 Makes: Kirloskar/Crompton/Texmo/CRI/KSB/Lubi/Havells Hi-flow V2/PSG/Aryen Varsha
Supply and Run of 2 of 2.5 Sq.mm WPSC (Whether Proof Single Core) Aluminium cable along with No. 10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains.
Sanitation and Water Supply Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap of approved make including cost and conveyance of all materials and labour charges etc., complete
Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm
Supplying and fixing 4" (101.6 mm) Floor Trap with Jali - UPVC/SWR Pipe fittings 1st quality ISI marked with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.MAT-02006
Supplying and fixing of 3" (76.2 mm) Nahany Trap with Jali - UPVC/SWR Pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work MAT-0200594
Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofjaquar make queen series with 7 years warranty Chrome plated MAT-02233
Supplying & Fixing 110 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc complete.
Supplying & Fixing 75 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc complete.
Supplying & fixing of cpvc pipe 28.60mm SDR 13.50 prince/sudhakar or any ISI Brand Including cost and conveyance of all materials and labour charges etc., complete for finished Item of work
Supplying & fixing of cpvc pipe 22.20mm SDR 13.50 prince/sudhakar or any ISI Brand Including cost and conveyance of all materials and labour charges etc., complete for finished item of work
Supply & fixing of tested NP bib taps at all levels of 12.70mm dia of Indian make first quality (N.P bib tap indian make 300 g) including cost & conveyance of all materials, labour charges for finished item of work complete for all floors
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring sheeting. planking, strutting, etc, complete for finished item of work included
Supply & fixing of RCC Well rings Of size 900 mm Dia including cost & conveyance of all materials, labour charges for finished item of work complete for Soak pit.
Supply & fixing of Cover Plates Of size 900 mm Dia including cost & conveyance of all materials, labour charges for finished item of work complete for Well Rings.
Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete indian make conforming to IS:2556-1995 MAT-01804
Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes with all fittings including supply
Cost and Supply of 63 mm dia pvc pipe 6 kg/cm2 including all labour charges etc complete MAT-07649
Drilling of Bore well with Hand Bore set to a finished dia of 112/165/175/180 mm justify both sides in all kinds of formations suitable for hand bore set drilling such as black cotton soils, sandy and alluvial soils and insertion of PVC/PVC blue casing pipe with couplings including slotting of pipe where ever required and fixing of bore well with cap and bail plug as per directions of the 8 department for a finished item of work including conducting yield test, crew charges, cost of consumables, transportation charges and bore development charges and all other charges required in fixation of pipe assembly, Flushing of bore with required pressure excluding cost of all required materials such as cap, bail plug, clamp sets, bolts and nuts etc, excluding all taxes, cost of PVC casing pipe, slotting charge
Supply, Delivery of ISI marked No. 4 Hand Pump with all accessaries
Labour Charges for Fixing No.4 Handpump
Cost and Supply of Gl Specials
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
AYYANKI DECL.pdf
TENDER_DOCUMENT • 0.48 MB
Agreement Booklet.doc
TENDER_DOCUMENT • 0.55 MB
Ayyanki Boq.xlsx
TENDER_DOCUMENT • 0.32 MB
Download all tender documents and submit your bid