REPAIR TO FENCING, GATE, PATH, HARD STANDING AND MISC B/R WORK IN W/S INSTALLATION UNDER GE (S) BINNAGURI

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and Labour for brick work with burnt fly ash old size bricks straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in cement concrete, brick work etc including taking out embedded portion and making good cement concrete, disturbed ground etc complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft/ loose soil, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25 cm thick watering & removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.

Material and Labour for Cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and Labour for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and as directed. Note : Actual weight of the fencing shall be ascertained by Board of Officers to be convened by GE.

Supply and Fixing in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line wire to be measured)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming to Fe-290, Gde E-165 complete all as specified and as directed.

M&L for 18-20 mm thick Granite (of any type) machine cut, in skirting/ dado laid over cement screed 10mm thick (average thickness) in cement motar (1:4) jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as dircted.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and Labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and as directed.

Material and Labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.

Dismantling plain or corrugated aesbestos sheet any gauge, thickness in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, Valley gutter, drip and straight to flashing (length and, fixed girth as fixed) with self tapping screws as specified

M&L for steel work of MS Square/round pipe or angles, tee etc as in purlin, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St.-240 complete all as specfied and directed.

Taking down cement plaster or lime plaster of any description from stone or brick wall/ ceiling etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD land including necessary working platform complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement morter 1:4 with water proofing compound finished even and fair complete all as specified and as directed. (Note : WPC shall be measured and paid separetely)

Supply only liquid water proofing compound complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation on new plastered surfaces of wall and applying two coats of exterior grade weather coat paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of exterior grade weather coat paint complete all as specified and directed.

M&L for preparating of new or previously untreated steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described, and applying of two coats of synthetic enamel paint over one coat of red oxide, zinc chromic complete all as specified and directed.

Material and Labour for one coat of synthetic enamel paint including preparation on old steel or iron surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Dismantling floor hearth or wall tiling and interlocking incl cement mortar bedding or sand and removing the rubbish off the premises complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, on vertical surfaces, in skirting etc. fixed over and including 10mm thick rendering/backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in whiter or coloured cement to match complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, fixed over and including 10 mm thick rendering/ backing coat in CM 1:4 complete all as specified and as directed.

Taking down tarfelt incl cement mortar bedding from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for screed bed or bedding layer 15 mm thick in CM (1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as specified.

M&L for bituminous primer @ 0.50 Kg/Sqm over the cement plaster incl preparation of surfaces as per manufacturers instruction complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application complete all as specified and as directed.

M&L for finishing the bituminous surface with aluminium paint @ 0.15 Ltr/ sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative complete in all respects as directed.

S&F in repairs 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or manual type complete all as specified & directed.

Taking down chowkhat or frame with door shutter (without taking off shutter from the frame) area exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed.

Taking down chowkhat or frame with door shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed.

M&L for pressed steel door frame of size 125mm x 60mm x 1mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.

M&L for pressed steel door frame of size 105mm x 60mm x 1mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts, extruded section 200mm long complete all as specified and as directed.

S&F aluminium anodized handles, D type, 150mm size complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified.

Taking up or down steel tubing and connections, 15mm bore including cleaning for serviceable pipe for re-fixing or removal of unserviceable pipe from site of work complete all as directed.

Ditto all as per serial item No. 48.00 described here-in-before but 20mm bore.

S&F 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including testing complete all as specified and directed.

Ditto all as per serial item No. 50.00 described here-in-before but 20mm bore.

S&F in repair bib taps, fancy type chromium plated with crutch or butterfly hadle screwed down, screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.

S&F in repair stop valve, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repairs 15mm pillar tap, cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure, with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repair 15mm bore PVC connection pipe 450mm long with PTMT nuts at bolt ends complete all as specified and as directed.

S&F in replacement rotational moulded PVC water storage tank 1000 ltrs capacity, double layered conforming to IS-12701 (1989) cylindrical vertical type multi-layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I

S&F 25mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and as directed.

S&F in repair for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F PVC (SWR) bends with access door of 110mm bore any radius complete all as specified.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S" trap from or back inlet etc including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified and as directed

S&F in repair PVC flushing cistern syphonic action type, 10 ltrs capacity, low level white with inlet ball valve, float and handle including bracket including flush pipe complete all as specified and as directed.

S&F in repairs vitreous china wash basin 550 x 400mm size white including brackets, CP waste coupling waste pipe, short connection complete all as specified and directed.

S&F 32mm bore waste coupling of PTMT (half of full threaded) complete all as specified and as directed.

S&F 32 bore bore wash hand basin waste pipe complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F stainless steel butt hinges medium weight 100mm size for PVC door complete all as specified and directed.

S&F factory made Z section steel ventilator with top hung shutter incl hinges, steel peg stay, with glazing bars including a shop coat Red Oxide priming including taking out old one, complete all as specified and directed.

Dismantling and breaking up 200 mm bore drain pipe (salt glazed stone ware or reinforced concrete) set in cement mortar alongwith concrete bed of drain pipes as in damaged portion of sewage line and work in foul position complete all as specified and as directed.

M&L for concrete bed to drain pipe, 200 mm bore including packing and under hunching against the sides of pipe after they are laid and tested in PCC (1:3:6) type C-2 (using 40 mm graded stone aggreagate) complete all as specified and directed.

S&F 200 mm bore grade 'A' SGSW drain pipe laid in trenches and jointed in cement, mortar (1:1) complete all as specified.

Excavation in trenches n. exc 1.50 m wide and n. exc 1.50 m in deep for foundation or for main hole etc n. exc 10 sqm on plan and getting out in soft/loose soil all as specified and directed.

Returning filling including spreading levelling watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as specified and directed.

Removing excavated material (soil) n. exc 50 m depositing where directed at a level n. exc 1.50 m above the starting point all as specified and directed.

S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete with glazing bars, dovetailed or welded including a shop coat Red Oxide priming complete including taking out old one all as specified and directed.

S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete without glazing bars, dovetailed or welded including a shop coat Red Oxide priming including taking out old one complete all as specified and directed.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed.

Supply & fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless and as required framing steel staples all as directed.

M/S S.K. CONSTRUCTION (BID ID -3479907)

M/S DELTA ENGINEERS & CO (BID ID -3479118)

M/s. RAMPHAL GARG (BID ID -3479100)

SHRI MANOIRANJAN BISWAS (BID ID -3479179)

SHRI SATPAL SINGH (BID ID -3479843)

M/S Pradeep Enterprise (BID ID -3480486)