Peruvemba GP 125/22-23-Motor Fixation 30HP for Palathully DWSS (Electrical Work)

Amount

1. Motor Pump set Installation.

OD287904/2022-2023:Supply, Conveyance and erection charges of 30HP Atmos GIGA N 125-315 End Suction Back Pullout pump of suction 150mm and delivery 125mm of maximum discharge at 195 M3/Hr @ 28M (3250 LPM) head range coupled with Kirloskar/ Crompton / GEC/ Seimens/ Jothy make TEFC, Squirrel Cage induction motor of 30HP/22KW(IE2) 50Hz, 1470 RPM, class F insulation with coupling bolt and nut , coupling guard, mounting bolt and nut , foundation bolt and nut etc. complete with common base plate fitted in correct alignment including providing 1mtr depth cement concreate foundation with 20cm offset all around the base plate with C C 1: 2:4 mix providing suitable foundation bolt and nut, and take trial run etc. directed at departmental officers.

OD287905/2022-2023:Supply, Conveyance and erection charges of KIRLOSKAR Make 1 HP Monobloc Vacuum Pump 2880 RPM, 3 Phase, 415V, 50HZ., Model KV-20 (20x20mm) Head Range 1.8 - 18M- Air Flow Rate in Cubic Meters per Hour with mounting bolt and nut , foundation bolt and nut etc. complete common base plate fitted in correct alignment including providing 1mtr depth cement concreate foundation with 20cm offset all around the base plate with C C 1: 2:4 mix providing suitable foundation bolt and nut, and take trial run etc.directed at departmental officers.

OD288103/2022-2023:Supply and providing vacuum pipe connection between 1hp vacuum pump and 30HP Pump by using 20mm G I pipe, 20mm flexible pipe, G I elbow, 20mm brass valve, nipple, reducer etc and in good working condition.

OD288099/2022-2023:Supply,Conveyance and erection charges of BCH Make Citation Series Fully Automatic Star delta Starter Model NASANLEN. Suitable for 30HP Motor Pump set on the existing Panel board and giving necessary connection etc.complete including all charges..

90.14.28.2:S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

90.14.24.1:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.1 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

90.14.24.23:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.10 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

OD288104/2022-2023:Supply and providing,laying and fixing of 150mm dia B class Medium G.I.Pipe with specials in ground etc.complete including all charges.

OD288106/2022-2023:Supply and providing,laying and fixing of 125mm dia B class Medium G.I.Pipe with specials in ground etc.complete including all charges.

OD288107/2022-2023:Supply and fixing 150mm dia B Class GI bend using required additional materials etc.complete including all charges

OD288108/2022-2023:Supply and fixing 125mm dia B Class GI bend using required additional materials etc.complete including all charges.

OD288109/2022-2023:Supply and fixing 125mm Cast iron Non return valve in the delivery pipe etc.complete including all charges.

OD288110/2022-2023:Supply and fixing 125mm sluice valve (heavy type) in the delivery pipe etc.complete including all charges.

OD288111/2022-2023:Supply and fitting 150mm MS flange (12mm thick) with all accessories in the delivery pipe etc.complete including all charges.

OD288112/2022-2023:Supply and fitting 125mm MS flange (12mm thick) with all accessories in the delivery pipe etc.complete including all charges.

OD288113/2022-2023:Supply and fitting 150mm flange washer with all required accessories accessories including all charges.

OD288114/2022-2023:Supply and fitting 125mm flange washer with all required accessories accessories including all charges.

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.1.3:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N

OD288173/2022-2023:Supply and providing and fixing 32A TPN disconnector fuse switch unit in sheet steel enclosure with ISI marked HRC fuses on existing panel board/wall/angle iron frame including drilling holes in frame, making connections etc.as required.

OD383546/2022-2023:Supply and installation of COS in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. 100 A 4 pole on-load COS AC 23A duty in SS Enclosure.

OD383664/2022-2023:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 amps.

OD288129/2022-2023:Supply,installation, testing and commissioning of Digital Multi function meter in the existing panel as required

OD288289/2022-2023:Supply and fixing 50/5 to 75/5 A, 5 VA, accuracy class 3, Resin Cast Metering CT

OD288130/2022-2023:Supply, installation, testing and commissioning of 2A SP MCB in the existing panel as required.

OD288136/2022-2023:Supply and fixing LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour.

OD288135/2022-2023:Supply and fixing LED indicators for all voltage ranges - Blue Colour.

OD288134/2022-2023:Supply and fixing Aluminium anodized legend plate of size 100 x 40 mm. with inscription of BUS BAR CHAMBER.

OD288133/2022-2023:Supply and fixing Aluminium anodized legend plate of size 100 x 40 mm. with inscription of CABLE ALLEY.

OD288132/2022-2023:Supply and fixing legend plate of Aluminium anodized Danger Notice Board of size 150 x 100 mm with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red color in the panel assembly.

OD383722/2022-2023:Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.50 cm,4 cm or 5 cm height.

90.12.7.28:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

90.12.41.8:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 16 sq mm with factory made clamp

90.12.41.5:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 4 sq mm with factory made clamp

9.1.21:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

OD288305/2022-2023:Supplying and making end termination with brass compression gland and copper lug socket for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1KV grade as required. 3X16 sq. mm (25mm)

OD288308/2022-2023:Supplying and making end termination with brass compression gland and copper lug socket for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1KV grade as required. 3 x 4 sq. mm (19mm)

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

90.6.4.62:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.16.00 sq.mm 3 Run

90.16.1.5:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG)

90.16.5.5:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG)

OD288314/2022-2023:Supply and providing 25 x 6 mm brass nut and bolt etc.as required.

OD288316/2022-2023:Supply & fixing BS type fuse links 63 A, bolted central tag type fuse link of size B1

OD383720/2022-2023:Supply and providing 2mm thick electrical grade chequied type rubber mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength in front of panels & Generators.

OD383721/2022-2023:Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.

P. PRADEEPAN

Bidder Name

SANTHOSHKUMAR G

P. PRADEEPAN