Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹71,444.98Accepted-AOC | L1 | Accepted-AOC agreement executed | |
| 2 | L2₹76,200+₹4,755.02 (6.66%)Accepted-AOC | L2 | Accepted-AOC second bidder | |
| 3 | L3₹76,279.17+₹4,834.19 (6.77%)Rejected-Finance | L3 | Rejected-Finance HIGHEST RATE QUOTED | |
| 4 | L4₹83,311.14+₹11,866.16 (16.6%)Rejected-Finance | L4 | Rejected-Finance HIGHEST RATE QUOTED | |
| 5 | L4₹83,311.14+₹11,866.16 (16.6%)Rejected-Finance | L4 | Rejected-Finance HIGHEST RATE QUOTED |
Tender Value
₹87,668
EMD Value
₹1,320
Closing Date
14 Oct 2021, 6:00 pmClosed
ASSISTANT ENGINEER LSGD
OFFICE OF THE ASSISTANT ENGINEER MOOTHEDAM GP
Annual Plan 2021-22-Pr.No 105/22-Nambooripotti Valladimunda Anganwadi Plumbing and Motor Installation in Moothedam GP
2021_LSGD_442042_1
26/LSGD/MTHDM/2021-22
Open Tender
Civil Works - Others
Item Rate
180 days
MOOTHEDAM GP
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Yes
₹1,320
Yes
25 Nov 2021
1 Oct 2021
18 Oct 2021
1 Oct 2021
14 Oct 2021
1 Oct 2021
Amount
Nambooripotty anganavadi
od1284289/2021_2022 : Supplying and fixing 1 HP submersible Motor pump including all fittings such as non return valve, preasure valve, flexible pipe, electric cable and labour charges et
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall
50.18.9.3.2 : Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2
50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2
18.54.4 : Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gms
18.16.1 : Providing and fixing brass stop cock of approved quality :15 mm nominal bore
17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
Valladimunda Anganavadi
od1284289/2021_2022 : Supplying and fixing 1 HP submersible Motor pump including all fittings such as non return valve, preasure valve, flexible pipe, electric cable and labour charges et
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
18.54.4 : Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gms
17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps
17.10.2.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board470x420 mm bowl depth 178 mm
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall
50.18.9.3.2 : Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2
50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2
50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
SANEED RAFI C K
ABY VARGHESE
PANAYAM THODIKA
MOHAMMED ALI P.T.
Bidder Name
FAISAL P
MOHAMMED ALI P.T.
ABY VARGHESE
SANEED RAFI C K
PANAYAM THODIKA
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_628987.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .