Restoration of Rain Damages LWSS Rana Khad and itsa djoining villages in GP Drubal Kot and Khalanoo in Tehsil Kotli Distt Mandi HP

Amount

Supply of Submersible Pumping set of KSB/Calama/SU/Johnsion make comprising to latest relevant BIS Code. The Pump should be fitted with bronze impller of suitable alloys as per BIS 5659-1972 latest suitable for having greased packed bearing and shaft with wound stator on mortor side and with soft protection sleeveo on pump side ensuring better life for shaft coupled to a submersibed squirrel cage electric induction mortor (water proof type)of required HP RPM 2900 of Kirloskar / NGEF/Cromption make conformining to BIS 9287-1979 latest with upto date amendmednts casing with double mechanical seal in oil chamber and grease packed lubricated bearings with minimum wear & tear. It should also be fitted with a device to take upexpansion of water with heating of mortor:-. Discharge (O)---- 4.53 LPS, Total Dynamic head :-57.97 Meters

Supply, Installation, Testing and Commissioning of Energy Saving Variable Frequency Starter Panel of suitable capacity for Submersible pump made out of 16 Gauge sheet, powder coated dust and vermin proof, wall/base mounted and front opening door type with copper insulated wiring suitable to operate 1 Nos. pumps (1 working ) each . Starter should be capable enough to handle the following faults like short circuit, over current, under current, over voltage, under voltage, dry run protection and phase loss with LED ON/OFF & TRIP indicators, Power Quality Monitoring & Controlling Relay at the Incomer Feeder, Should be fitted with Surge Suppressor Device suiatble to protect against class-1 & 2 surges. Make: Aarmation Electric Private Limited/Tricolite/ELLES/Adlec

Providing double flanged CI sluice valve 80 mm dia PN1 of Leader/BHEL/Kirloskar/GLED/Kilburn fourses / Kartar make and equal to dia of suction pipe and cpable of withstanding the normal seat pressure as per IS:780:1984 with upto date ammendments.

Providing and laying copper PVC insulated arsourced power cable (one cable carrying all the three phases) of suitable size and capicity to motors and all other electrical equipments as per IS:1554(P-I) 1988 or latest ith upto ammendements of siemens/GLOSTER /IEC/ICC/EICO/NATIONAL/GRANDLAY make including all other accessiores such as thinbles, flexible pipes, solders, nuts and bolts cable glands etc. laid in pipes or trenches under floor.Motors side (From switch to starter and starter to motor)

supply side (From Meter of HPSEB to bus bar and switch)

Royal Construction Company (BID ID -510872)

Gurmukh Singh (BID ID -511150)