Procurement of Spares for Excen Crusher of Unit 6 under AHP (MM) dept.,STPS.

SHAFT WITH SHAFT STRUCTURE WITH SLEEVES FOR BOTTOM ASH CRUSHER DCIPS DRG. NO.28P03-1B-T-582(REV-2) Additional Data: The Shaft Strucuture is to be supplied with . 1) Shaft EN 8 ( Heat treated and hardened to 170 - 230 BHN ) 2) 20mm thick MS 2062 Plate Machined and welded with low Hydrogen electrode to the shaft. 3) Shaft Sleeve 2 nos MOC SS 304 .

GLAND PACKING 1 SET=2 NOS FOR BOTTOM ASH CRUSHER DCIPS "DRG.NO.28P03-1B-T-582(REV-2) Additional Data: 1 set = 2 nos Gland Packing . MOC Brass

Lantern Ring (1 Set=2 Nos.) for Bottom Ash Crusher as per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: 1 set = 2 nos Gland Packing . MOC Brass , IS 318

Packing Gland Follower (1 Set=2 Nos.) for Bottom Ash Crusher as per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: 1 set = 2 nos Gland Packing . MOC Brass IS 318

Packing Gland Flange for Bottom Ash Crusher as per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: 1 set = 2 nos Gland Packing . MOC MS 2062

Slinger for Bottom Ash Crusher Drawing No.28P03-1B-T-582(Rev-2) Additional Data: 1 set = 2 nos Gland Packing . MOC MS 2062

SPROCKET DRIVE AND DRIVEN FOR BOTTOM ASH CRUSHER DCIPS DRG.NO.28P03-1B-T-582(REV-2) Additional Data: Drive Sprocket - Cast Iron FG 260/ steel casting , Gear Tip hardened . Driven Sprocket - cast iron / steel casting / MS 2062 Tip hardened to 460 BHN. The Sprockets should match with the existing Chain at Site.

CHAIN (SIMPLEX) FOR DRIVE ARRANGEMENT FOR BOTTOM ASH CRUSHER DCIPS DRG.NO.28P03-1B-T-582(REV-2) Additional Data: Chain will have 1 1/2 IN Pitch , ANSI # 140 , Estimated Length 6400mm . Approved Make Diamond Chain, India Chain , ACME Chain . The Chain to Be supplied with one Connector & one Link. The Chain should fit the existing Sprockets at site

BEARING HOUSING DE FOR BOTTOM ASH CRUSHER DCIPS AS PER DRAWING NO.28P03-1B-T-582(REV-2);WITHOUT (BEARING ,LABYRINTH RING - 2 NOS. ; OIL SEAL - 2 NOS. ; FASTNERS - 1 LOT BEARING Additional Data: Nozzle complete with Ceramic Insert . Nozzle Body SS 410 Hardened to RC 32-35, and Ceramic insert with 95% Almunia heat treated and hardened to 8 to 9 MOH

BEARING HOUSING NDE FOR BOTTOM ASH CRUSHER DCIPS AS PER DRAWING NO.28P03-1B-T-582(REV-2);WITHOUT (BEARING ,LABYRINTH RING - 2 NOS. ; OIL SEAL - 2 NOS. ; FASTNERS - 1 LOT BEARING

BEARING HOUSING COVER DE FOR BOTTOM ASH CRUSHER DCIPS ASH CRUSHER AS PER DRAWING NO.28P03-1B-T-582(REV-2)

BEARING HOUSING COVER NDE FOR BOTTOM ASH CRUSHER DCIPS AS PER DRAWING NO.28P03-1B-T-582(REV-2)

LABYRINTH RING FOR BOTTOM ASH CRUSHER DCIPS AS PER DRAWING NO.28P03-1B-T-582(REV-2)

Ramkrishna Precision Engineering

A T ENGINEERING CONCERN

UNIQUE MATERIAL HANDLING SYSTEMS PRIVATE LIMITED

AURO ENTERPRISE

BANRJEE ENGINEERING WORKS

B.A.ENGINEERING WORKS

M03-C18-00062 HSN: 84819090

M03-C18-00065 HSN: 84819090

AURO ENTERPRISE

M03-C18-00007 HSN: 8431

M03-C18-00066 HSN: 84819090

UNIQUE MATERIAL HANDLING SYSTEMS PRIVATE LIMITED

M03-C18-00064 HSN: 84819090