Construction of link road from Manwal Jattan to Mandoli Km. 0/000 to 2/800

Amount

Excavation for roadway in hilly areas in all heights and depths and in all kind of soil by manual/mechanical means, including saturated soil comprising of ordinary soil, ordinary rocks, soft rocks, hard rocks, chiseling/ wedging out rock ( where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines, grades, cutting and trimming of side slopes, camber, super elevation and levels as shown in the drawings and as directed by the Engineer-in- Charge complete in conformity with the requirements of M.O.R.D. Technical Specification section 300 and 1600 and sorting out and stacking of useful materials with in all leads and lifts of material in accquired road width and transportating of un-useful materials for filling in road ways, camber, embankments for grade improvements and disposal of all surplus materials to the approved dumping sites through all modes of transportation including head load or animal transport or by mechanical means including levelling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. Recovery of stones to the tune of 1162.80 cubic metre quantity at the rate of Rs. 300/ only (Rupees Three Hundred only) per cubic metre shall be effected from the contractor running bills on pro-rata basis as per actual quantity executed. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him to the extent of damage occured in all cases. The rate is including octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site obtained from roadway cutting and excvation from drains and foundation of all other structures or other sources, graded and compacted to meet requirements, including setting out, true to the lines, grades,width and side slopes in accordance with drawings, including spreading the embankment material with Motor-Grader in successive layers of 200mm (two hundred millimetre) uniform thickness and compacting with vibratory roller 8-10 (eight to ten) Tonne static weight to meet the requirements of table 300.1 & 300.2 as per MORD technical specification section 300 ,1600 and as per the entire satisfactions and directions of Engineer-in-Charge, including carriage of material with in all leads, lifts and other incidential. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all leads and lifts, transporting to site, spearding grading to required slope and compacted to meet requirement of Table 300-2 as per M.O.R.D. technical specification section 400 including hauling of material within all leads, lifts and other incidental and as per entire satisafaction and direction of Engineer-In-charge . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Earth work in excavation in foundation for all types of road structure such as retaining walls, breast walls, culverts, drains and parapets and other similar structures in all kinds of classification of soil including saturated comparising of ordinary mix soil, ordinary rock, hard rock, chiselling/wedging out rocks( where blasting in prohibited ) complete in accordance with the line and dimensions shown in the drawing including setting out construction of shoring , bracing removal of stumps and other deleterious materials and disposal of excavated materials upto any lead and lift including dressing of sides bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty milimetres) compacted thickness including shoring, strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering complete as per drawing and MORD technical specification section 300 and 1600 as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, \Royalty, Malkana, toll tax,GST or other taxes imposed by the Governement.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40 mm (forty millimetre) nominal size) on ground or under water in Retaining wall/breast wall and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub-soil water) including removal of slush which may arise at time of laying concrete for all heights/ depths and any quantum of water including cost of form work and curing complete for 14 ( Fourteen) days and as per drawings and M.O.R.D. technical specification section 800,900,1200 and 1600 as per the entire satisfation and directions of Engineer-in- Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Back filling with granular material behind abutment Retaining wall/breast wall, wing wall and the like complete as per drawings and M.O.R.D. technical specification section 1200 and 1600 as directed by the Engineer-in-Charge , including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing 100mm (one hundred millimetre) diametre PVC pipe Weep Holes in brick masonry/stone masonry/plain/reinforced concrete abutments, wing wall/return wall, retaining walls and breast walls etcetera extending through the full width of the structures with slope of IV:20H (One vertical : twenty Horizontal) towards draining face complete as per drawing and M.O.R.D. technical specification section 700 , 1200 and as per the directions and entire satisfations of Engineer-in- Charge, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Loosening of the ground upto a level of 300mm ( three hundred millimetre) below the sub-grade level, watered, graded with motor grader and compacted by rolling with Road roller 8-10 ( eight to ten) KN Static weight at OMC to achieve the required density as per Tables 300.1 and 300.2 of MORD technical specification section 300 and as per the direction and the entire satisfation of Engineer-in- Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of Granular sub-base 150mm ( One hundred fifty milimeter ) compacted thickness by providing well graded material spreading in uniform layers with tractor mount grader on prepared surface mixing by mix in place method with tractor mount appropriate rotavator at OMC and compacting with three wheel 80-100 (eighty to one hundred) KN static Roller to achieve the desired density, complete as per MORD technical specifications section 400 for grading-1 material and as per the direction and entire satisfaction of Engineer-in -Charge including carriage of material within all leads, lifts and other incidentals .The rate includes Octroi, Royality, Malkana, toll tax , GST or other taxes imposed by the Government.

Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimetre) compacted thickness, crushed stone aggregates of Grading-II, 63mm- 45mm (sixty three millimetre to forty five millimetre) nominal size to water bound Macadam specification including spreading in uniform thickness using templates hand packing, rolling with three wheeled 80-100 (eighty to hundred) K.N. static in stages to proper grade and camber, including applying and brooming stone screening Type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.20 (zero point two zero) cubic metre per 10 sqm (ten square metre) and binding material at the rate 0.06 (zero point zero six cubic metre) per ten square metre to fill up the interstics of course aggregate, watering and compacting to the required density as per M.O.R.D. technical specification section 400 and as per the direction and satisfation of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing, laying, spreading by mechanically means and compacting 75mm (seventy five millimetre) compacted thickness stone aggregates of Grading-III, 53mm- 22.4mm (fifty three millimetre to twenty two point four millimetre) size to water bound Macadam specification including spreading in uniform thickness, using template, hand packing, motor grader, rolling with three wheeled 80-100 (eighty to hundred) K.N. static weight in stages to proper grade and camber including applying and brooming stone screening Type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18 cum (zero point one eight cubic metre) per 10 sqm (ten square metre) to fill up the interstices of course aggregate, watering and compacting to the required density as per MORD technical specification section 400 and as per the entire satisfation and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and applying primer coat with bitumen emulsion SS-1 on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogram) per square metre as per M.O.R.D. technical specification section 500 and as per the direction and the entire satisfation of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) including cleaning of road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate of 0.275 kg (zero point two seven five kilogram) per square metre on the prepared granular surface treated with primer complete as per M.O.R.D. technical specification section 500 and as per entire satisfation and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing, laying and rolling open graded premix carpet of 20mm (twenty millimeter) compacted thickness composed of 13.2mm (thirteen decimel two millimeter) to 5.6 (five decimal six millimeter) aggregate for wearing coarse including loading of aggregate with front end loader heating binder and aggregate in hot mix plant 30/40 (thirty/forty) tonne per hour capacity transporting mixed materiwal with tipper to tiste of work and laying with paver finisher to the required grade and camber rolling with power road roller 8/10 (eight/ten) tonne using 0.27 cum (zero decimal two seven cubic metres) of graded stone aggregate mixed with 14.6 Kg (fourteen point six kilogram) of bitumen binder using VG-10 (Viscosity Grade-ten) per ten square meter of road surface to required line grade and level but excluding the cost of tack coat and seal coat inclusive of all corrective measures such as laying of profile corrective coarse for all depth filling of depression for all depth and construction of super elevation and camber, where required as per M.O.R.D. technical specifications section 500 by mechanical means or as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type B at the rate of 6.8 Kg (six point eight kilogram) per ten square metre mixed with crushd sand defined as passing 2.36 sieve at the rate of 0.06 cum (zero decimal zero six cubic metre) per ten square metre using bitumen VG-10 (Viscosity grade-ten) by mechanical means as per MORD technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octori, royality, malkana, toll tax, GST, or other taxes imposed by the Government

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other equivalent type as per Clause 1501 using M 30 (thirty) Grade, design mix concrete having coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetres), mixed in a concrete mixer of not less than 0.2 (zero point two) cubic metre capacity and appropriate weigh batcher using approved design mix, laid in approved fixed side form work (steel channel) laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing, spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14(fourteen) days, using curing compound (where specified) and water finishing to lines and grade as per drawings and M.O.R.D. technical specification section 1500 and as per direction and the entire satisfaction of Engineer-in-Charge , including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade M-10 (M-Ten) nominal mix 1:3:6 (one cement isto three sand isto Six graded crushed stone aggregate) 20mm (twenty millimetres) nominal size on ground or under water in open foundation for all types of structure and the like etcetera complete including pumping or bailing out water , dewatering (surface/ Sub-soil water) including removal of the slush which may arise at time of laying concrete for all heights/depths and any quantum of water, including cost of form work and curing complete for 14 (fourteen) days in drain and as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 and as per the entire satisfation and directions of Engineer-in- Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and erecting ordinary Kilometer Stone ( precast) made of reinforcement concrete Grade M-15 (M-fifteen) nominal mix 1:2.5:5 (one cement isto two and half sand isto five crushed/ stone aggregate) 40mm (forty millimetre) nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work as per the approved standard design drawing sign and size arrangement of letters including Painting and lattering as per IRC- 8 (eight) Complete as per MORD Technical Specification section 1700 and fixing at site complete as per direction of Enginner-In-Charge including carriage of materials with in all leads, lifts and other incidental .The rates is including of Octroi, Royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and erecting 200 meter ( Two hundred meters)Stone ( precast) made of reinforcement concrete Grade M-15 (M-fifteen) nominal mix 1:2.5:5 (one cement isto two and half sand isto five crushed/ stone aggregate) 40mm (forty millimetre) nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work as per the approved standard design drawing sign and size arrangement of letters including Painting and lattering as per IRC- 8 (eight) Complete as per MORD Technical Specification section 1700 and fixing at site complete as per direction of Enginner-In-Charge including carriage of materials with in all leads, lifts and other incidental .The rates is including of Octroi, Royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing reinforced cement concrete boundary pillars/Guard stone made of standard design as per IRC:25 fixed in position including finishing and lettering but excluding painting as per M.O.R.D. Technical Specification section 1700 and as per direction of Engineer-In-charge including carriage of material with in all leads. lift and other incidentals. The rates is including of Octroi, Royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of semi reflective cautionary, mandatory and informory sign board 600mm (six hundred millimetre) equilateral trinagular board as per IRC:67 made of 1.5mm (one point five millimetre) thick MS sheet duly stove white colour in front and gray on back with red reflective border of 65 mm (sixty five millimetre) width and required letters and figures with reflective engineering grade tape of required shade and colour supported and welded on 47mm x47mm of 12SWG) ( Fotry seven millimetre into forty seven milimeter of Twelve Standard wire gauge ) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450 X 450 X 600mm (four hundred fifty into four hundred fifty into six hundred) , 600mm (six hundred millimetre) below ground level and as per drawing and M.O.R.D technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint as per specifications and entire satisfaction and directions of Engineer-in-Charge. The rates is including Octroi, Royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of semi reflective place indentification informatory sign board upto 0.90 Sqm (zero point ninety square metre) as per IRC:67 made of MS sheet of 2mm ( two milimeter) thick duly stove with white color in front and grey colour on back with red reflective border of 70mm (seventy millimetre) width and required message letters and figures with reflective engineering grade tape of required shade and colour supported and welded on 47mm X 47mm ( Forty Seven millimetre into Forty Seven millimetre) of 12 SWG, square tube of 3050mm ( three thousand fifty milimeters) height duly strengthened 25x5mm ( Twenty five into five milimeters) M.S flat iron on edges on back firmly fixed to the ground by mean of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450 X 450 X 600mm (four hundred fifty into four hundred fifty into six hundred) , 600mm (six hundred millimetre) below ground level as per drawing and M.O.R.D technical specification section 1700 and as per direction of Engineer-in-Charge including carriage of material withinall leads, lifts and other incidental. The rate is including of Octroi, Royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of semi reflective place indentification informatory sign board more than 0.90 Sqm (zero point ninety square metre) as per IRC:67 made of MS sheet of 2mm ( two milimeter) thick duly stove with white color in front and grey colour on back with red reflective border of 70mm (seventy millimetre) width and required message letters and figures with reflective engineering grade tape of required shade and colour supported and welded on 47mm X 47mm ( Forty Seven millimetre into Forty Seven millimetre) of 12 SWG, square tube of 3050mm ( three thousand fifty milimeters)height duly strengthened 25x5mm ( Twenty five into five milimeters) M.S flat iron on edges on back firmly fixed to the ground by nean of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450 X 450 X 600mm (four hundred fifty into four hundred fifty into six hundred) , 600mm (six hundred millimetre) below ground level as per drawing and M.O.R.D technical specification section 1700 and as per direction of Engineer-in-Charge including carriage of material within all leads, lift and other incidental. The rate is including of Octroi, Royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5 mm (Two point five millimetre) thick including reflectorising glass beads at the rate of 250 grms (two hundred fifty grams) per sqm area, thickness of 2.5mm (two point five millimetre) is exclusive of surface applied glass beads by roads markign machine as per IRC 35. The finished surface to be level, uniform and free from streaks and holes as per MORD technical specification section 800 including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of materials within all leads , lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing dual direction retro reflective plastic Cat-eyes studs of impact resistant plastic 115x80x16mm (one hundred fifteen into eighty into sixteen millimetres) ultra violet resistant yellow colour having micro prismatic cube corner refelectors suitable for fixing with expoxy/bitumen adhesive make ENNIS/STIMONITE complete as per drawing and technical specification section 1700 of MORD specification 2013 as per the direction of the Engineer-in-charge , including carriage of materials within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax , goods service tax, labour cess or other taxes imposed by the Government.

Providing and erecting a "W" metal beam crash barrier comprising of 3mm (three millimetre) thick corrugated sheet metal beam rail, 70 cm (seventy centimetre) above road level, fixed on ISMC series channel vertical post, 150 X 75 X 5 mm (one hundred fifty into seventy five into five millimetre) spaced 2 m (Two metre) centre to centre, 1.8 m (One point Eight Metre) high, 1.1 m (One Point one metre) below gound/road level, all steel parts and fitments to be galvenised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 X 75 X 5mm (one hundred fifty into seventy five into five millimetre), 330 mm (three hundred thirty millimetre) long complete as per MORTH Technical specification section 800 and as per the direction of Engineer-in-charge including, carriage of material within all leads and lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in sub-structure Grade M-15 (M-Fifteen) nominal mix 1:2.5:5 (one cement isto two and half sand isto five graded crushed stone aggregate (40mm) forty millimetres nominal size) including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water in Toe Wall and parapets etcetera including cost of form work and curing complete as per M.O.R.D. technical specification section 800,900 and 1200 and as per the direction and the entire satisfation of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in substructure grade M-20 (M-Twenty) design mix with cement contents not less than 330 Kg (Three Hundred Thirty Kilogram) per cubic metre with 40mm (Forty millimetre) nominal size graded crushed stone aggregate in abutments etcetra as per drawing and MORD technical specification section 800, 900 and 1200 including the cost of form work and curing complete including carriage of material within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechnically mixed and vibrated reinforced cement concrete is substructure , Grade M-20 ( M-Twenty) designed mix with cement contents not less then 350 Kgs ( Three Hundred fifty Kilograms ) per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate in Bed Block , dirt wall and the like etcetra for all height/depth including cost of form work and curing complete but excluding the cost of reinforcement for reinforced work as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction and the entire satisfaction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure M-25 Grade (M-Twenty five ) designed mix with cement contents not less than 400 kgs (four hundred kilograms) per cubic metre with 20mm (Twenty millimetre) nominal size graded crushed stone aggregate in Deck slab, wheel guard and the like including cost of form work and curing complete but excluding the cost of reinforcement for Reinforced concrete work as per drawings and M.O.R.D. technical specification section 800,900,1400 complete and as per the direction and the entire satisfation of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement in Super structure including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per drawing and MORD technical specification section 1000 and 1400 as per the directions and entire satisfactions of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechnically mixed and vibrated reinforced cement concrete , Grade M-20 ( M-Twenty) Nominal Mix 1:2:4 ( One cement isto two sand isto four graded crushed stone aggregate 40mm ( Forty Millimeter) on ground or under water in open foundation for all type of structure and the like etcetera complete including pumping or bailing out water , dewatering ( surface/sub soil water) includinfg removal of slush which may arise at the time of laying concrete for all height/depths and any quantum of water ,including cost of form work complete as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction and the entire satisfaction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying ( to level or slope) 900mm dia (Nine hundred millimetre ) diametre reinforced cement concrete heavy duly non pressure pipes IS Class NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1 : 2 ( One cement isto two sand) but excluding the cost of excavation, protection works, back filling, pipe bedding concrete and masonry work in head walls and parapets as per drawing and M.O.R.D technical specifications section 1100 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and Laying Random Rubble masonry with hard stone of approved quality in cement mortar 1:5 (One Cement is to five sand) for sub structure complete as per drawing and MORD technical specification section 700 and 1200 in Toe Wall etcetra in all heights/depth on ground or underwater including pumping or bailing out water and sub soil water, dewatering, removal of slush which may arise at the time of stone masonary work and curing complete as per direcrion of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Nishchal Mahajan

V S SAINI

Dinesh Construction Works