Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹64,300Accepted-AOC 31 A K ROAD AGARTALA | AGARTALA | WEST TRIPURA | TRIPURA | 799001 | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | STANDARD ELECTRONICS L1 |
|---|---|---|---|---|
| 1.00 | Providing in/c testing and commissioning (except Installation) of Split type High wall split A.C. Machine with Inverter Compressor technology operating on non-CFC refrigerant (R-410A/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS:1391 (Part-II) specification (Evaporator & Condenser must have copper pipe) suitable for operation on 230 volt +- 10%, not less than 3 (Three) Star rating (2019 Standard), 50Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge.Capacity 2.00TR(6000 kcal/ hr) | 1 | Nos | 51,000 ₹51,000 Lowest |
| 2.00 | Standard installation of 1.5 TR/2.00 TR capacity High Wall Split type type Air Conditioner in/c repairing of drilled wall by cement mortar, painting In/c necessary insulation of copper pipes and also providing electrical 3 pin 16 ampTop for connection in socket & necessary scafolding etc. complete as per direction of the Engineer-in-Charge. | 1 | Nos | 7,500 ₹7,500 Lowest |
| 3.00 | Fabrication of M.S. platform for placement of condensing unit by using M.S. angle of (50x50x5) mm size base plate, nuts & bolts or cradle of suitable sizes i/c fitting, fixing grouting by cement mixer, painting, as per direction of the Engineer-in-Charge. | 1 | Nos | 3,000 ₹3,000 Lowest |
| 4.00 | Supply and installation of additional length of copper pipe of 5/8" and 1/4" diameter or suitable diameter for suction and liquid line in a set and wrapping of copper pipes between indoor and outdoor unit (1.5 TR & 2.00 TR AC) beyond the standard length as per direction of the Engineer-in-Charge. | 4 | Mtr. | 500 ₹2,000 Lowest |
| 5.00 | Providing and connecting Electric Control cables between indoor unit and outdoor unit beyond the standard length .
3C X 2.5 Sq. mm copper cable. | 4 | Mtr. | 100 ₹400 Lowest |
| 6.00 | Providing hard UPVC pipe of good quality of at least 25 mm diameter including necessary clamping and fittings for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge. | 4 | Mtr. | 100 ₹400 Lowest |
Tender Value
₹71,150
EMD Value
₹2,135
Closing Date
16 Jun 2025, 3:00 pmClosed
Executive Engineer
Mechanical Division Agartala
Providing, installation and Commissioning of split type Air Conditioning machine in the Conference Room at Dhalai District Court Complex Ambassa during the year 202526
2025_CEPWD_62010_1
21_EE_DNIeT_MECH_AGT_2526
Open Tender
Electrical Works
Works
30 days
Ambasa
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹2,135
25 Aug 2025
28 May 2025
16 Jun 2025
28 May 2025
16 Jun 2025
28 May 2025
Amount
Providing in/c testing and commissioning (except Installation) of Split type High wall split A.C. Machine with Inverter Compressor technology operating on non-CFC refrigerant (R-410A/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS:1391 (Part-II) specification (Evaporator & Condenser must have copper pipe) suitable for operation on 230 volt +- 10%, not less than 3 (Three) Star rating (2019 Standard), 50Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge.Capacity 2.00TR(6000 kcal/ hr)
Standard installation of 1.5 TR/2.00 TR capacity High Wall Split type type Air Conditioner in/c repairing of drilled wall by cement mortar, painting In/c necessary insulation of copper pipes and also providing electrical 3 pin 16 ampTop for connection in socket & necessary scafolding etc. complete as per direction of the Engineer-in-Charge.
Fabrication of M.S. platform for placement of condensing unit by using M.S. angle of (50x50x5) mm size base plate, nuts & bolts or cradle of suitable sizes i/c fitting, fixing grouting by cement mixer, painting, as per direction of the Engineer-in-Charge.
Supply and installation of additional length of copper pipe of 5/8" and 1/4" diameter or suitable diameter for suction and liquid line in a set and wrapping of copper pipes between indoor and outdoor unit (1.5 TR & 2.00 TR AC) beyond the standard length as per direction of the Engineer-in-Charge.
Providing and connecting Electric Control cables between indoor unit and outdoor unit beyond the standard length . 3C X 2.5 Sq. mm copper cable.
Providing hard UPVC pipe of good quality of at least 25 mm diameter including necessary clamping and fittings for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge.
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_63075.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .