Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹12,006
Closing Date
14 Oct 2026, 2:00 pm
EXECUTIVE ENGINEER PWD MALDA ELECTRICAL DIVISION
O/O THE EXECUTIVE ENGINEER PWD MALDA ELECTRICAL DIVISION Singatala Malda PIN 732101
Withdrawing of existing WIC incl its cooling units control panel, servo voltage stabilizer and DG from Medical College Premises and installation of all the units to DFWS, Malda at Muchia Drug and vaccine Procurement and Distribution Center
2026_WBPWD_5077167_1
WBPWD/EE/MED/e-NIQ-71/2026-27
Open Tender
Electrical Work/ Equipment
Item Rate
30 days
Muchia
Please refer Tender documents.
7 documents required · 7 mandatory
₹12,006
2 Oct 2026
2 Oct 2026
27 Oct 2026
2 Oct 2026
14 Oct 2026
8 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Opening of the existing WIC Cooling unit from the running WIC, after sealing the gas line of the compressor, lowering the unit by expert Cold Chain technician. | 2 | Set | 10 | ₹20 |
| 2 | Opening of the existing WIC Condensing unit from the running WIC, after sealing the gas line of the compressor, lowering the unit by expert Cold Chain technician. | 2 | Set | 10 | ₹20 |
| 3 | Opening the electronic temperature sensors from the WIC sensor points very carefully so thet the temp. sensor and it's connectors wont damage. | 5 | Set | 10 | ₹50 |
| 4 | Opening the chart recorder sensor and other mechanical temperature sensor tubes from the WIC body very carefully. | 3 | Set | 10 | ₹30 |
| 5 | Opening the WIC roof panels by opening the locking CAM very carefully by long size proper allen delocking key, from ceiling, detaching from body, after marking the units very carefully so that the parts won't damage. If any part damage, the same may be replaced by the agency without any extra cost. | 6 | Panel | 10 | ₹60 |
| 6 | Opening the WIC Wall panels including flat panels, corner panels and door frame panel, by opening the locking CAM very carefully by long size proper allen delocking key, from floor panel and body, after marking all the panels very carefully so that the parts won't damage. If any part damage, the same may be replaced by the agency without any extra cost. | 16 | Panel | 10 | ₹160 |
| 7 | Opening Floor parts of the WIC from existing position by removing cement morter concrete, very carefully part by part with Aluminium Chequired plate, Plywood etc. If any part damage, the same may be replaced by the agency without any extra cost. | 1 | Job | 10 | ₹10 |
| 8 | Transportation of all the WIC parts includinng servo voltage stabilizer from Medical College premises to Newly build DFWS Malda including loading and unloading by expert mutia in supervision of exopert cold chain technician. | 1 | Job | 10 | ₹10 |
| 9 | Construction of the WIC body by using the removed floor panel, roof panel, corner panels, wall panels and door panels by step by step accurately positioning, marking, floor panel build up, fixing door panels, fixing the openings by Silicone with load bearing member adjustment for cooling units. The cement concrete finishing, and fixing of ply and top aluminium chequired plates also includes in this job. | 1 | Job | 10 | ₹10 |
| 10 | Installation of the existing WIC Cooling units with cooling fans from the running WIC, after positioning the fans, water collection tray, fixing the drain water pipe line through the body, and commissioning the unit by expert Cold Chain technician. | 2 | Set | 10 | ₹20 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
Tendernotice_2.pdf
PDF • 2.93 MB
Tendernotice_3.pdf
PDF • 0.22 MB
BOQ_5173509.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .