Re-routing of Old type-II HT line

Amount

S&F XLPE insulated screened PVC bedded , galvanised , unearthed, electric power cables (heavy duty)with compacted circular aluminium conductor 11000 volts grade 3 core cross sectional area 35 Sq mm screened with extruded semiconducting compounding in combination with copper tape (0.3kA for one second )cores laid up ,inner seath PF PVC tape, conforming to IS7098 (Part-II) 1985 with latest amendments . Make Gems cab/ CCI/ RR/ Finolex.

M&L of Cable jointing kit for 11 KV (earthed/unearthed)grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories (to be fixed with glands) suitable for 3 core XLPE armoured alluminium conductor cable of size 35 Sq MM. Make-M-SEAL, VENUS, 3M, RAYCHEM.

Excavating of Hard/dense Soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth and getting out.

M&L of sand filling under floors or in foundations including watering and consolidation

Supply & laying reinforced precast concrete cable cover ,class HV Type I flat size 300mmx180mmx40mm

Returning filling in, including spreading, leveling, watering and well ramming in layers of soft soil/loose soil, not exc 25 cm

Demolition & dismantling of cement concrete (unreinforced) in ground floors and paving n exc 15cm thickness (below or above ground level)

M & L Cement concrete in foundations, filling and mass concrete.Type B2(1:2:4) (40 mm garded aggregate)

M&L of stone walling of squared rubble, uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:4

S&F of tubes medium grade galvenised with all fitting laid in trenches Bore dia 100 mm

M&L of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 (11.0 metres long)

M&L of switche air break, gang operated Triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps 11000 Volts.

M&L OF Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

M&L of insulators Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut 150mm height, 150mm dia for 11000 volts grade

Aditya Electricals (BID ID -771757)

AMIT ENGINEERING (BID ID -765845)