Tender for LAYING OF UNDERGROUND CABLE, FAULT FINDING & RECTIFICATION WORK AT VARIOUS SDN UNDER IDAR DO

Sr.No. Description Unit Quantity Amount in

Laying of HDPE pipe confirming to IS

4984:1955(Amendment no.2) having diameter

110 mm and minimum thickness 5mm at a

minimum depth of 1200mm below the road

surface by push through method by drilling the

road with HDD machine/manualy without breking

the road surface and laying of nay size of HT/LT

XLPE insulated aluminum the duct as per the

instruction of EIC and specifications (without cost

of HDPE pipe,cable will be supplied by UGVCL)

Laying (including installation, testing and

commissioning) of various size of Single circuit

KV XLPE insulated Alluminum armoured Cable in

ground 1200 mm deep and 300 mm wide trench,

providing sand cushioning below (75 mm thick

layer of sand) and above (75 mm thick layer of

sand) of the cable and covering it with RCC half

round Hume pipe (150 mm inner diameter with

thickness of 30 mm and One meter in length)

before refilling pre-bonding tap/warning tap

should provide below 700 mm from the ground

level and back filling the same to make ground

level as per original. As per specification and

drawing of UGVCL. (RCC half round pipe should be

provide throughout on cable without gap). Only

Cable will be supplied by UGVCL.

Laying (including installation, testing and

commissioning) of various size of Double circuit

KV XLPE insulated Aluminum armoured Cable in

ground in single trench 1200 mm deep and

mm wide trench, providing sand cushioning below

(75 mm thick layer of sand) and above (75 mm

thick layer of sand) of the cable and covering it

with RCC half round Hume pipe (150 mm inner

diameter with thickness of 30 mm and One meter

in length) before refilling pre-bonding

tap/warning tap should provide below 700 mm

from the ground level and back filling the same to

Signature of Tenderer Company’s Round Seal Page 1 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

make ground level as per original. As per

specification and drawing of UGVCL. (RCC half

round pipe should be provide throughout on cable

without gap). Only Cable will be Supplied by

Supply of HDPE pipe having 110/120 mm

diameter (As required), minimum thickness 5 mm

as per IS ( Amendment no.2 IS 4894:1995) for

laying of PE 100,6kg/cm2 for 11 kc XLPE cable.

Laying of various sizes of 11 kv XLPE insulated

Aluminium armoured cable in cable tray/trench

over / below the ground level( Excluding cable

tray, only labour charges)

Provinding and fixing of Route Marker of CC 1:2:4,

150mm*150mm*750mm concrete stone

embedded in earth atleast 300mm below the GI

and 450mm above GI at distance of approximately

100 mtr or as directed by engineer in charge The

route marker must be painted with yellow colour

of stone with red colour for embracing on stone

UGVCL 11 KV cable

Supply and Fixing of medium grade GI pipe of size

7 of 110 mm Diameter (Min 2.5 meter required) MTR 131 925

Weight 9 to 10 kg/Mtr.

Provinding and fixing HT push on/heat shrink type

end outdoor termination kit of

3M/Raychem/Frontier/Yamuna make at

switchgear end boxes, transformer (PAD/Pole

mounted) for 3 core 11 KV XLPE Aluminium

8 Conductor Armoured cable as specifield with MTR 120 5982

connection of leads including cutting, stripping of

cable , insulationas, providing compression type

terminal, crimping of lugs with suitable crimping

tool, outdoor application(120/150/185 mm2 HT

Provinding and fixing HT push on/heat shrink type

end outdoor termination kit of

3M/Raychem/Frontier/Yamuna make at

switchgear end boxes, transformer (PAD/Pole

9 mounted) for 3 core 11 KV XLPE Aluminium MTR 70 6378

Conductor Armoured cable as specifield with

connection of leads including cutting, stripping of

cable , insulationas, providing compression type

terminal, crimping of lugs with suitable crimping

Signature of Tenderer Company’s Round Seal Page 2 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

tool, outdoor application(240mm2 HT XLPE Cable)

Provinding and fixing HT push on/heat shrink type

Straight joint 3M/Raychem/Frontier/Yamuna

make for 3 core 11 KV XLPE Aluminium Conductor

Armoured cable as specifield with connection of

leads including cutting, stripping of cable,

insulations, providing compression type terminals,

crimping of luges with suitable crimping tool.

(120/150/185 mm 2 HT XLPE Cable)

Provinding and fixing HT push on/heat shrink type

Straight joint 3M/Raychem/Frontier/Yamuna

make for 3 core 11 KV XLPE Aluminium Conductor

Armoured cable as specifield with connection of

leads including cutting, stripping of cable,

insulations, providing compression type terminals,

crimping of luges with suitable crimping tool. (240

mm 2 HT XLPE Cable)

labor charges for HT cable underground fault

Welfare Cess @ 1%

EXECUTIVE ENGINEER

Signature of Tenderer Company’s Round Seal Page 3 of

Place: Signature of Tenderer Date: