Supply, Installation, testing and Commissioning for Modernization of Existing Distribution Sub- Stations under SDP-2024-25

Amount

SITC of

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp,Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

95 mm² Single Core ,1.1kV Grade, PVC Insulated Stranded ConductorFRLS type 100 KVA DTs

9 Mtr. Long Pole,ST-410 SP33)

33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative,creepage distance 900mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Chemical Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

LT Distribution Box for 63 kVA DTR with TPN MCCB short ckt rating 16 KA for incomer 90Amp and suitable MCCBs for outgoing circuits with terminal extensions

LT Distribution Box for 100 kVA DTR with MCCB for lncomer & Switch Fuse Units for Outsolns Ci.cuits

Wedge connectors/PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

Cement bottoming 1:2:4 mix as per REC standards .5cum/pole

Painting of Poles Red Oxide

Painting of Poles Aluminium Paint

Sundry items like almunium lugs,jumpers,binding tape etc

M/S SAKINA ENGINEERING WORKS (BID ID -141161)