THRISSUR CORPORATION KOOREKANCHERY ZONAL- SUPPLY AND FIXING OF GYM EQUIPMENTS FOR OPEN GYM AT MUNAYAM BUND IN DIVISION-32 PROJECT NO456-24/25

Amount

CHEST PRESS Providing and fixing using minimum 100 NB GI pipe for Main Frame , 32 Nb Gi pipe handle frame, 25 Nb Gi pipe clamps, nylon 66 injection molded casing ,foot rest : Lid Roto molded seat within built bolts 3/8”X1.5”pipe Cap: Nylon 66 injection molded. Bearing Housing and pin-seamless pipe and round, Bearings: permanent sealed of reputed make Powder coat: Done by pure polyester powder with 70-80 micron thickness powder

ARMROTATOR Providing and fixing using minimum 100NBGIpipeforMainFrame Best Quality bearing Powdercoat:Donebypurepolyester powder with 70-80 micron thickness powder

ELLIPTICAL Providing and fixing using minimum 100 NB GI pipe for Main Frame minimum 40 NB & 25 NB GI pipe for FOOTRestPipe,minimum40NB&25 NB GI pipe for handle, minimum 25 NB & 40 NB GI pipe for connecting pipe, LLDP roto molded seat within built bolts 3/8” X 1.5” for FOOTREST, nylon 66 injection molded bearing cap & pipe cap , fully done by first coat of primer jotun brad 40-50 micron thickness and top coat ofpure polyester powder with 70-80 micron thickness powder

LEGPRESS MainpipeDia-127mm., Thickness-3mm BaseplateDia-200mm., Thickness-10mm. Powdercoat:Donebypurepolyester powder with 70-80 micron thickness powder SIZE:- 2185*X460*X1700*mm

MONKEYBAR Providingandfixingusingminimum 100 NB GI pipe forMainFrame, 32 NbGi pipe handle frame, 25 Nb Gi pipe clamps, nylon 66 injection molded casing, Cap: Nylon 66 injection molded. Bearing Housing and pin-seamless pipe andround, Bearings: permanent sealed of reputed make ,Powdercoat:Donebypurepolyster powderwith70-80micronthickness powder .

ROWER GALVANIZEDIRON:-Fabricated with main post of 114mm dia and rest of the pipes are of 50mm dia . Either GI pipes. WELDING:-All joints of pipe are MIG welded with joints scalloped as necessary and dressed off removing sharp edgesandburrs.Zincprimer paint to be applied at all welding points prior to finishing. POWDERCOATING:-Powder coated using Akzo Nobel or equivalent of70 - 80 micron thick.

TRIPPLE TWISTER Pipe-structuremadeofG.I.PipeOF 114 mm OD. ConnectingPipe–MadeofG.I.Pipe OF 42 OD. HandleFrame-MadeofG.I.Pipe OF 32 OD. Bearing – Thrust ball bearing BearingCaps-MadeupofHDPE Material 62 mm TwisterPlates–MadeofLLDPE Pole Caps – Made up of HDPE Material. PowderCoated(Thickness90 micron)

SINGLESTEPPER Providing and fixing using minimum 100 NB GI pipe for Main Frame, minimum 25 NB GI pipe for handle frame,minimum 25NB & 20 NB GI pipeforseatingframestand,molded seatwithinbuilt bolts 3/8”X 1.5” for FOOTRESTnylon66injectionmolded bearingcap&pipecap,fullydoneby first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder coat

BOX LETTER LED BOARD ACRYLIC LED BOARD with GI pipe frame 4 Ft x 10 Ft (approx)

ANIL JAMES C

EXCEL ENGINEERS

ALIAS VARHESE