CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT AAU, KANSARI.

NAME OF WORK:CONSTRUCTION OF OFFICE-CUM-LABORATORY

BUILDING AT AAU, KANSARI

GENERAL SUMMARY SHEET

SUMMERY COST REMARK

1 TOTAL FOR CIVIL WORKS 35537173.86 A

2 TOTAL FOR PLUMBING AND SANITATION WORKS 1146916.24 B

3 TOTAL FOR ELECTRICAL AND HVAC 5301441.00 C

TOTAL A + B + C

1. Labour will not be allowed to stay in campus except watchman & his family only.

ટે ડર ભરનાર ઠે કેદાર માટે ખાસ સુચના ( Special Condition (GST) )

૧. સદર શીડયુલ-બીમાં દશાવેલ દર સને-2024-25ના SOR મુજબ GST િસવાયના દરો લાગુ પાડવામાં આવેલ છે .

જેથી ટે ડર ભરતી વખતે GST િસવાયના દરો ખાસ યાને લેવાના રહેશે.

GSTનું ચુકવણું કરવામાં આવશે અને કો ટાકટર ે GST ભરપાઇ કયા બાદ GSTR-1 અને GSTR-3Bની નકલો

કચેરીમાં રજુ કરવાની રહેશે અને GST ભરપાઇ કયાનું માણપ લેટર પેડ ઉપર આપવાનું રહેશ.ે સરકાર ીમાં GST

૩. GST નંબર ધરાવતા ન હોય તેવા કો ટાકટરને અલગથી GSTનું ચુકવણું કરવામાં આવશે નિહ.

૪. સરકાર ીના ધારાધોરણ મુજબ ર% GST-TDS એજ સીના બીલમાંથી કપાત કરવામાં આવશે.

I / We here by agree to carryout and complete the above mentioned work at _____________________% (In Figure)

_______________________________ percentage (In Words) above / bellow than the rates of items mentioned in

Schedule - B enclosed here with.

Executive Engineer

Anand Agricultural University,

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

1 Excavation for foundation Up To 1.5 m Depth including sorting out and

stacking of useful materials and disposing of the excavated stuff for

all lead and lift for Loose or soft soil including watering and 899.90 Cum 122.94

consolidation with rammers…... etc. complete as directed by E.I.C.

2 Excavation for foundation from 1.5 m to 3.0m Depth including sorting

out and stacking of useful materials and disposing of the excavated stuff

for all lead and lift for Loose or soft soil… etc., complete as directed by

3 Filling in foundation and plinth with murrum or selected soil in layers

of 20cm. thickness including watering, ramming and consolidating etc. , 33.00 Cum 294.38

complete as directed by E.I.C.

4 Filling With Available excavated Soil excluding rock in plinth, floors etc.

in layers of 20 cm. thickness including watering, ramming, consolidating

and dressing and in proper level and slope…etc., complete as directed by

5 Providing and Filling Sand in plinth, foundation and under floors including

watering, ramming, consolidating and dressing in layers not exceeding

cms in thickness and in proper level and slope… etc., complete as by

6 Providing and filling Rubble stone including hand packing and filling

interstices with quarry spalls behind abutments and between returns as 129.80 Cum 1094.11

7 Providing and laying P.C.C. 1:4:8 (1 cement : 4 coarse sand : 8 hand

broken stone aggregates 40 mm nominal size) and curing consolidation

with rammers complete excluding cost of form work in Foundation and

Plinth…etc., complete as directed by E.I.C.

8 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing, cantering & shuttering in true line and level etc. but excluding cost 202.500 Cum 5459.20

of reinforcement in RCC work for Footing and Column up to Plinth for

any type of cross sectional area... etc., completed as directed by E.I.C.

9 ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1 Coarse sand : 2 stone

aggregate 20mm nominal size kapchi) IN M-25 including the cost of

necessary formwork, compacting with vibrator, curing, cantering &

shuttering in true line and level etc. but excluding cost of reinforcement in

RCC work for Wall/Pardi to Plinth for any type of cross sectional area...

etc., completed as directed by E.I.C.

10 Providing and laying and constructing Brick Work using common burnt

clay conventional building bricks having crushing strength not less than

35 Kg/Sq.cm. In Foundation and Plinth in cement mortar 1:6 (1

cement : 6 fine sand) in true line and level including curing, scaffolding,

racking out the joints... etc. completed as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 1 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

11 Providing and laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing and shuttering in true line and level etc. but excluding cost of 12.20 Cum 7101.80

reinforcement in RCC work for Copings and Sill bands for any type of

cross sectional area etc. completed as directed by E.I.C.

12 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 31.80 Cum 7197.60

reinforcement in RCC work for Ground Beams for any type of cross

sectional area... etc., completed as directed by E.I.C.

13 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 26.900 Cum 7197.600

reinforcement in RCC work for Plinth Beams for any type of cross

sectional area... etc., completed as directed by E.I.C.

14 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator, curing

& shuttering in true line and level etc. but excluding cost of 128.70 Cum 6914.50

reinforcement in RCC work for Plinth Slab for thickness 10 to 13 cms

for ground floor... etc., complete as directed by E.I.C.

15 Labour charge for concreting with Vaccume Dewatering Technique

including loading earting,compacting complete with "C" channels as per

requirement and labour charges etc., complete as directed by E.I.C.

16 Providing and laying 75cm wide Plinth protection including excavating

for 300mm deep, 100mm thick Cement Concrete 1:4:8 (1 cement :

coarse sand : 8 stone aggregate 40 mm nominal size) for foundation

brickwork of 500mm ht. 200mm thick sand filling including 50mm thick

750mm wide IPS Cement Concrete 1:2:4 [1cement : 2coarse sand :4hand

broken stone aggregate] including curing, finishing with floating coat of

neat cement slurry on top, sand face plaster and external cement paint

on vertical side etc complete as per architectural detail drawing and as

directed by E.I.C.

17 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of

reinforcement in RCC work for Lintel for any cross sectional area...etc.,

completed as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 2 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

18 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of

reinforcement in RCC work for Column for cross sectional area 0.08 to

0.12...etc., complete as directed by E.I.C.

19 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of

reinforcement in RCC work for Column for cross sectional area 0.12 to

0.18...etc., complete as directed by E.I.C.

20 ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1 Coarse sand : 2 stone

aggregate 20mm nominal size kapchi) IN M-25 including the cost of

necessary formwork, compacting with vibrator, curing, cantering &

shuttering in true line and level etc. but excluding cost of reinforcement in 5.40 Cum 7894.80

RCC work for Wall/Pardi for any type of cross sectional area... etc.,

completed as directed by E.I.C. -Ground Floor

21 Providing and laying Cement Concrete 1 : 1 : 2 (1 Cement :1 Coarse

sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25 including

finishing the exposed surface with CM 1:3 (1 cement : 3 fine sand) to give

a smooth and even surface and cantering and formwork and curing for 0.70 Cum 7914.40

RCC work for Chhajja not exceeding 10 cm thickness for any level... etc.

completed as directed by E.I.C .

22 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 31.60 Cum 10435.20

reinforcement in RCC work for Beams on ground floor for cross

sectional area 0.08 to 0.12., completed as directed by E.I.C.

23 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 26.30 Cum 8939.30

reinforcement in RCC work for Beams on ground floor for cross

sectional area 0.12 to 0.18., completed as directed by E.I.C.

24 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator, curing

& shuttering in true line and level etc. but excluding cost of

reinforcement in RCC work for Slab for thickness 13 to 15 cms for

ground floor... etc., complete as directed by E.I.C.

25 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 3.10 Cum 10044.20

reinforcement in RCC work for Steps and Landing for any cross

sectional area... etc., completed as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 3 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

26 Providing & Laying twisted, Factory made Epoxy Coated TMT Bar

reinforcement for Ground Floor FE-500 D of TATA-Tisco, Nilkanth,

Kamdhenu, NRE, National and Galant make for RCC work including

cleaning, bending, binding and placing in position with 16 gauge annealed

wires… etc. completed as per detailed structural drg & details directed by

27 Providing and laying Brick Work for ground floor using common burnt

clay conventional building bricks having crushing strength not less than

Kg/Sq.cm. in cement mortar 1:6 (1 cement : 6 fine sand) in true line and 126.30 Cum 4496.05

level including curing, scaffolding, racking out the joints...etc. completed

as directed by E.I.C.

28 Providing and laying Half Brick Work for Ground Floor using common

burnt clay conventional building conventional bricks having crushing

strength not less than 35 Kg/Sq.cm. in cement mortar 1:4 (1 cement :

coarse sand) with 2 nos. of 6mm mild steel round bars after every three

coarse embedded in cement mortar in true line and level in super

structure above plinth level including curing and necessary scaffolding,

racking out joints... etc., completed as directed by E.I.C.

29 Providing and applying 20mm thick Double Coat Mala Cement Plaster

work on interior Walls and Ceiling Surfaces comprising of base coat of

12mm thick cement plaster in cement mortar (1Cement : 4 coarsesand) in

rough finishing and 8mm thick top coat of cement mortar 1:2 (1Cement : 2621.30 Sq.m 283.95

2Coarse sand) finished with trovel including scaffolding curing etc.

complete as directed by E.I.C.

30 Providing and applying 20mm thick Sand Faced Cement Plaster on

External walls upto height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 1716.10 Sq.m 352.44

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete as directed by

31 Providing, laying and fixing 600mm x 600mm size and thickness 8mm to

10mm Vitrified Tile Flooring of Johnson/Varmora make laid on 20mm

(average) base of CM 1:3 (1 cement : 3 course sand) and jointed with

Epoxy Chemical Grout of approved colour having 4mm grooves created

by spaces including curing and finishing with flush pointing of grout… etc.,

complete in true line and level/slope as per architectural detailed drawings

and as directed by E.I.C.

32 Providing, laying and fixing 600mm x 600mm size and thickness 8mm to

10mm Vitrified Tile Skirting 75mm of Johnson/Varmora make laid on

10mm (average) base of CM 1:3 (1 cement : 3 course sand) and jointed

with Epoxy Chemical Grout of approved colour having 4mm grooves

created by spaces including curing and finishing with flush pointing of

grout… etc., complete in true line and level/slope as per architectural

detailed drawings and as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 4 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

Providing, laying and fixing 600mm x 600mm size 18mm Thick even

coloured Green Ready Mirror Polished Kotah Stone Slabs in Flooring

of Rooms, Passages & Toilet and Treads of steps and landings laid on 725.10 Sq.m 1650.50

20mm (average) base of CM 1:6 (1 cement : 6 course sand) laid over and

jointed with grey cement slurry including rubbing, curing and polishing…

etc., complete in true line and level / slope and as directed by E.I.C.

34 Providing, laying and fixing 600mmx600mm size 18mm Thick even

coloured Green Ready Mirror Polished Kotah Stone Slabs in

Risers/Skirting etc. laid on 10mm thick cement mortar 1:3 (1 cement :

coarse sand) and jointed with grey cement slurry including rubbing,

polishing and curing…etc, completed in true line and level / slope and as

directed by E.I.C.

35 Providing, laying and fixing 600mm x 600mm size 25 mm Thick Polished

Kotah Stone Slabs in Flooring Parking and Godown laid over 20mm

(average) base of CM 1:6 (1 cement : 6 course sand) and jointed with

grey cement slurry including rubbing, curing and polishing… etc.,

complete in true line and level/slope and as directed by E.I.C.

36 Providing, laying and fixing 25mm Thick even coloured Polished Kotah

Stone in Risers/Skirting etc. laid on 10mm thick cement mortar 1:3 (1

cement : 3 coarse sand) and jointed with grey cement slurry including

cutting of edges in right angle manually [ghadai], rubbing, polishing and

curing…etc, completed in true line and level / slope and as directed by

37 Providing, laying & fixing Coloured Glazed Tiles of size 600x450mm of

Johnson/Varmora make in Toilet Dado laid over 10mm (average) thick

base of cement mortar 1:3 (1 cement : 3 coarse sand) laid over and

finished with flush pointing in white cement slurry with pigment to match 458.50 Sq.m 1030.57

the shade and colour of the tiles in true line and level, curing... etc.,

complete as per detailed drawing, selection and as directed by E.I.C.

Providing, laying & fixing Coloured Glazed Tiles of size 300X300mm of

Jhonson/Varmora make in Flooring of Toilets laid over 12mm (average)

thick base of cement mortar 1:3 (1 cement : 3 course sand) laid over and

finished with flush pointing in white cement slurry with pigment to match

the shade and colour of the tiles in true line and level, curing... etc.,

complete as per detailed drawing and directed by E.I.C.

39 Providing and fixing white coloured 3 track UPVC Windows of Ncl Veka -

I 50 (German technology UPVC Profiles) Sliding series having 5 mm clear

toughened glass, Slider O/F - 40502 - 15000 / 90 MM + 1 MM, Slider

Sash - 40502 - 13000 / 57 MM + 1.5 MM, Flyscreen Sash - 40502 -

13000, with fibre mesh, AI Rail - Groove shaped, Single point

accessories, Sliding touch lock right and Sliding touch lock left type

handles, Fly screen handles for Flymesh, Single wheel roller without

groove, Sliding parts as per detailed drawings and specifications,

complete as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 5 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

40 Providing and fixing white coloured UPVC Ventilation system of NcI

Veka - 139 (German technology UPVC Profiles) Complact Casement

series having 5 mm frosted glass, Outer frame - 41101 - 17000 / 39 MM +

1 MM, Mullion - 41201 - 04000 / 61 MM + 1.5 MM, including cutout for

exhaust fan complete as per detailed drawings and specifications and as

directed by E.I.C.

41 Providing and fixing 35mm Thick Both Side Laminated Water Proof

Flush Door Shutters of Century, Archid, Green or Anchor make including

first class hardwood and cross band, block board core with plywood face

panels, 6mm thick batten patti all around the shutter, laminate of

approved make and design including fixtures and fastening Godrej make

Mortise Lock with Handle Set NEH 19 Rosette-Eco Pin Cylinder-9 Inch

Lockbody-60 mm 1CK Cylinder-Knob-Antique Brass finish and Aks make

8"x1-1/2"x1-1/2" Brasss hinges and AKS make Stopper Section Round

8"x12" including providing and applying primer coat Asian/Berger make

and two coats of oil painting of Asian/Berger make to the edges etc.

complete as per detail drawings and as directed by E.I.C.

42 Distempering (three Coats) with oil bound PLASTIC EMULSION PAINT of

ASIAN Paints of required shade on wall surfaces to give an even

shade, over and including a priming coat with distemper primer of

approved brand and manufacture after thoroughly brusing the surface free 3422.30 Sq.m 125.40

from mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth etc. complete as

directed by E.I.C.

43 Distempering (three coats) with oil bound PLASTIC EMULSION of ASIAN

Paints of required shade on ceilings and roofing slopes to give an

even shade including a priming coat with distemper primer of approved

brand and manufacure after thoroughly brushing the surface free from 2365.90 Sq.m 133.11

water dropping and other foreign matter and also including preparing the

surface even and sand papered smooth as directed by E.I.C.

44 Providing and applying two coats of Asian paints Ultima Apex brand on

external wall surface of approved shade and colour after thoroughly

brushing the surface free from water dropping, cement mortar and other

foreign matter including one coat of Asian make Primer including

preparing the surface even and smooth including necessary scaffolding…

etc., complete as directed by E.I.C.

45 Providing, Laying and fixing in true line and slope 20mm thk. single side

Polished Jet Black Granite Stone as sills , jambs and frames in two

layers of window/Door/Vent and other as per detail drawing including

polishing both edges, all sides/edges shall be machine cut, making

necessary cutting in wall/floors or where ever required, fixing the same

with CM 1:3 including finished with flush pointing with cement slurry with

pigments to match the shade and colour of granite fitting shall be in true

line and level etc. complete as directed by EIC and Architectural detailed

drawings..etc. complete as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 6 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

46 Providing, fabricating and fixing MS Grill as per detail drawing at balcony,

windows and openings in passages etc., at all heights including welding,

grinding, fixing in position in true line and level including clear welding

dots, preparing the surface by thoroughly cleaning oil, grease, dirt and

other foreign matter including applying red oxide of Asian make, priming

coat of Asian make and two coats of enamel of approved colour and

shade of Asian make... etc., complete. by E.I.C.

Providing and laying Laboratory Platform with 18 to 20mm Thick Single

Side Mirror Polished Black Colour Granite Stone as Platform top and

sides and Single side Polished Kotah stone as sandwiched vertical and

horizontal supports as per detailed drawing with rounding & polishing

elevation edge, including all sides/edges should be cut with machine 39.10 sqmt 4824.60

including making necessary cutting in wall, floors or where ever required,

fixing the same with CM 1:3 (1 cement : 3 fine sand) shall be in true

line & level & making the adjoining surface as per original including curing

etc. complete as directed by EIC.

48 Providing, fabricating and fixing in walls M.S. C.R.C. Japan sheet

Shutters of 16 gauge frame inside inserted as per requirement on wall,

floor, ceiling all round and 18 gauge shutter for cupboard as per drawing

and design with chromium plated fixtures & fastenings, locking 34.70 Sq.m 3998.50

arrangement including applying red oxide priming coat and painting

coats of ready mixed enamel paint of Asian/Berger quality brand and

shade etc.. complete as directed by E.I.C.

Providing, laying & fixing true line & slope 25MM thick double side

polished Kotah Stone for Cupboards and Store Racks with machine cut

edge to all sides including polishing one long edge of elevation, making

necessary cutting in wall, floors or where even required fixing the same

with CM 1:3 (1 cement : 3 fine sand) & making the adjoining surface as

per original including curing etc. complete as directed by EIC.

50 Providing and fixing Jali Door including 40x40 m.s. square pipe as Frame

and Shutter style, 25x25 m.s. square pipe as intermediate bracing,

gauge 15cm m.s. plate, m.s. hinges and latch of asian/jindal/tata make

including fabricating, hoisting, fixing in position with angle cleats, holdfast

etc in RCC or masonry etc. in true line level and plumb including complete

welding, clear the welding dots with grinder machine and match to original

including applying priming coat and painting the frame in two coats with

enamel paint of Asian make of approved colour and shade including

brushing and cleaning the surface of all dirt, dust and other foreign matter

etc. complete as per detailed drawing and as directed by E.I.C.

Providing and fixing 40MM Thick Fully Glazed Indian Teakwood shutters

for Main Door including Indian Teak Wood Frames of 12 cm X 7cm size,

12mm square m.s. bar grill fixed in shutter style and 5mm Glass of Saint

Gobain / Modi Float make including stainless steel fixtures and fastening

of Godrej make Mortise Lock with Handle Set NEH 19 Rosette-Eco Pin

Cylinder-9 Inch Lockbody-60 mm 1CK Cylinder-Knob-Antique Brass finish

and Aks make 8"x1-1/2"x1-1/2" Brasss hinges and AKS make Stopper

Section Round 8"x12" including one coat of primer of Asian/Berger make

and two coats of oil painting of approved colour and shade of Asian make

etc. complete as per detailed drawing and as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 7 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

Providing and fixing in position Collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel

pulleys complete with bolts, nuts, locking arrangements,stoppers handles 27.200 Sq.m 1314.10

including one coat of primer of Asian/Berger make and two coats of oil

painting of approved colour and shade of Asian make etc. complete as

per detailed drawing and as directed by E.I.C.

53 Providing, fabricating and fixing Stainless Steel Railing of AISI-304

grade, using 50 mm dia Stainless steel pipe of 16 gauge, 3 nos. 16 mm

dia SS pipe of 16 gauge, round balustrade of 38mm with complete

assembly of SS studs to house the horizontal 16mm pipes and top

handrail, bend and coupler to be used as per architectural detail drawings,

for the railing, in parapet, stair... etc including fabricating, hoisting, fixing

in position with angle cleats, holdfast etc in RCC or masonry, in true line

level and plumb, including complete assembly, including matt polishing

and buffing, complete, including scaffolding etc complete as directed by

54 8 mm Calcium Silicate Aurorae False Ceiling Tile False ceiliing

Providing and fixing Aurorae -CS (Calcium Silicate Square Edge) Tile of

Gyptech make at all heights of size 595 x 595 x 8 mm of approved

texture, design and pattern. the tile should have paint finish and Pin hole

semi perforation on the top face suspended with in true horizontal level

suspended on interlocking T-Grid of hot dipped all round galvanized iron

section of 0.30 mm thick comprising of main T runners of 24 x32 mm of

length 3000 mm, cross T of size 24 x 25 mm of length 1200 mm and

secondary intermediate cross T of size 24 x 25 mm of length 600 mm to

form grid module of size 600 x 600 mm suspended from ceiling using

galvanized mild steel item 50 mm long 8mm outer diameter M-6 dash

fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length 222.800 Sq.m 1165.56

and L shape level adjuster of size 85x25x2 mm, spaced at 1200 mm

centre to centre along main ‘T’. The system should rest on periphery walls

/partitions with the help of GI perimeter wall angle of size 24 x 24 x3000

mm made of 0.40 mm thick sheet ,to be fixed to the wall with help of

plastic rawl plug at 450 mm centre to centre & 40mm long wall S.S.

screws. The exposed bottom portion of all T-sections used in false ceiling

support system shall be pre painted with polyester baked paint, for all

heights.The work shall be carried out as per detailed specifications,

architectural drawings complete as directed by E.I.C.

55 Providing furnishing and erecting Electric Traction Elevator having

persons capacity, 1.00 MPS Speed, Ground + 2 floors travel, 3 stops and

3 openings, 415 volts - 3 phase - 50 hertz - alternating current power

supply, Integrated panel control, down collective system operating,

Gearless machine in the hoistway, Platform size - 1400 mm x 1500 mm,

Car size from inside - 1340 mm x 1350 mm, hoistway - 2000 mm x

1850mm, Stainless Steel cabin with back side S.S. mirror, handrail, led

lights and fan, SS car panels, PVC tiles flooring, SS vision cut door in car

entrance, 900 mm x 2000 mm center opening, SS vision cut door for

hoistway entrance, Automatic operational doors, Luminous hall button

with up/down arrow at all floors, Spectra display at all floors and in car,

blower battery operated alarm bell, emergency light and phone, Ceiling

with led lights, VVVF Drive, complete as per detailed drawings and

company's detailed specification and as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 8 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

56 Providing and fixing Rectangular M.S. Pipes in elevation 80x40 mm,

3mm body thickness, M.S. rectanglar pipes fixed rigidly by gusset plates

fixed rigidly to edge of slab by fasteners as per detailed architectural and

structural drawings, 40mm side in elevation having 80mm clear distance

between two pipes of asian/jindal/tata make including fabricating, hoisting,

fixing in position in true line level and plumb including complete welding,

clear the welding dots with grinder machine and match to original 173.30 Sq.m 4046.95

including applying priming coat and painting the rectangular pipes in two

coats with enamel paint of Asian make of approved colour and shade

including brushing and cleaning the surface of all dirt, dust and other

foreign matter etc. complete as per detailed drawing and as directed by

Providing, Laying & Fixing 6mm thick white glazed tukdi of equal size

pieces for China Mosaic type water proofing treatment, applying

neat cement slurry with waterproofing compound including cleaning

the surface opening the cracks in V grooves pattern and filling the cracks

with silicon sealant in a good manner including brick bat bedding as

directed to have proper slope of 75mm to 100mm or which ever is

required over a layer of C.M 1:3 (1 Cement: 3 Sand) and filling the joints

with C.M 1:3, including finishing the top surface with 15mm thick

waterproof cement plaster in C.M1:3 using chemical water proofing

compound as per manufacturers specification including vata of 100mm x

100mm size on inside periphery of the parapet in C.M. 1:1 and fixing the

glazed tiles pieces on the plaster inlcuding filling the joints with white

cement including drip mould at peripheri, acid wash, cost of labour, curing

and testing for no leakage etc. completed as directed by the EIC.

58 Providing throating of plaster Drip & Moulding to R.C.C. Chhajja, Roof

Gutter etc. complete as directed by E.I.C.

59 Providing Cement Vata ( 10cm X 10cm size ) quarter round in cement

mortar 1 : 1 including neat cement finishing watering etc. complete as 53.60 Rmt 24.28

directed by E.I.C.

60 Providing and filling in sunk slabs light wt Burnt Cinder including

compacting, curing and ready for executing China mosaic waterproofing 29.30 Cum 2500.00

on top etc., complete as directed by E.I.C. - All floors

61 Providing and applying general insecticide Pest Control treatment to

floors , doors, cupboards, including labours, materials etc. complete as 1029.20 Sq.m 91.63

directed by EIC.

62 Providing and laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing and shuttering in true line and level etc. but excluding cost of 5.90 Cum 7142.90

reinforcement in RCC work for Copings (Sill band) for any type of cross

sectional area etc. completed as directed by E.I.C. First Floor

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 9 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

63 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 11.60 Cum 11529.30

reinforcement in RCC work for Lintel for any cross sectional area...etc.,

completed as directed by E.I.C.- First Floor

64 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 0.70 Cum 11968.10

reinforcement in RCC work for Column for cross sectional area 0.08 to

0.12., complete as directed by E.I.C. - First Floor

65 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 52.60 Cum 10002.80

reinforcement in RCC work for Column for cross sectional area 0.12 to

0.18, complete as directed by E.I.C. - First Floor

66 ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1 Coarse sand : 2 stone

aggregate 20mm nominal size kapchi) IN M-25 including the cost of

necessary formwork, compacting with vibrator, curing, cantering &

shuttering in true line and level etc. but excluding cost of reinforcement in

RCC work for Wall/Pardi for any type of cross sectional area... etc.,

completed as directed by E.I.C.- First Floor

67 Providing and laying Cement Concrete 1 : 1 : 2 (1 Cement :1 Coarse

sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25 including

finishing the exposed surface with CM 1:3 (1 cement : 3 fine sand) to give

a smooth and even surface and cantering and formwork and curing for 2.50 Cum 7955.50

RCC work for Chhajja not exceeding 10 cm thickness for any level... etc.

completed as directed by E.I.C .- First Floor

68 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 25.20 Cum 10476.30

reinforcement in RCC work for Beams for cross sectional area 0.08 to

0.12, completed as directed by E.I.C.- First Floor

69 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 24.20 Cum 8980.40

reinforcement in RCC work for Beams for cross sectional area 0.12 to

0.18, completed as directed by E.I.C.- First Floor

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 10 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

70 Providing and laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing and shuttering in true line and level etc. but excluding cost of

reinforcement in RCC work and lead and lift for Parapet Wall Caps for

any cross sectional area...etc. complete as per detailed structural drawing

and as directed by E.I.C.- First floor

71 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator, curing

& shuttering in true line and level etc. but excluding cost of

reinforcement in RCC work for Slab for thickness 13 to 15 cms... etc.,

complete as directed by E.I.C. - First floor

72 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 3.10 Cum 13165.30

reinforcement in RCC work for Steps and Landing for any cross

sectional area... etc., completed as directed by E.I.C.-First Floor

73 Providing & Laying twisted, Factory made Epoxy Coated TMT Bar

reinforcement for Ground Floor FE-500 D of TATA-Tisco, Nilkanth,

Kamdhenu, NRE, National and Galant make for RCC work including

cleaning, bending, binding and placing in position with 16 gauge annealed 34217.00 Kg 87.05

wires including all lead and lifts… etc. completed as per detailed structural

drg & details directed by E.I.C. for First Floor

74 Providing and laying Brick Work using common burnt clay conventional

building bricks having crushing strength not less than 35 Kg/Sq.cm. in

cement mortar 1:6 (1 cement : 6 fine sand) in true line and level 129.10 Cum 4538.48

including curing, scaffolding, racking out the joints...etc. completed as

directed by E.I.C. - First floor

75 Providing and laying Half Brick Work for First Floor using common

burnt clay conventional building conventional bricks having crushing

strength not less than 35 Kg/Sq.cm. in cement mortar 1:4 (1 cement :

coarse sand) with 2 nos. of 6mm mild steel round bars after every three

coarse embedded in cement mortar in true line and level in super

structure above plinth level including curing and necessary scaffolding,

racking out joints... etc., completed as directed by E.I.C.- First floor

76 Providing and applying 20mm thick Double Coat Mala Cement Plaster

work on interior Walls and Ceiling Surfaces comprising of base coat of

12mm thick cement plaster in cement mortar (1Cement : 4 coarsesand) in

rough finishing and 8mm thick top coat of cement mortar 1:2 (1Cement : 2529.50 Sq.m 311.18

2Coarse sand) finished with trovel including scaffolding curing etc.

complete as directed by E.I.C. - First floor

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 11 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

Providing, Laying & Fixing 6mm thick white glazed tukdi of equal size

pieces for China Mosaic type water proofing treatment, applying

neat cement slurry with waterproofing compound including cleaning

the surface opening the cracks in V grooves pattern and filling the cracks

with silicon sealant in a good manner including brick bat bedding as

directed to have proper slope of 75mm to 100mm or which ever is

required over a layer of C.M 1:3 (1 Cement: 3 Sand) and filling the joints

with C.M 1:3, including finishing the top surface with 15mm thick 439.70 Sq.m 935.10

waterproof cement plaster in C.M1:3 using chemical water proofing

compound as per manufacturers specification including vata of 100mm x

100mm size on inside periphery of the parapet in C.M. 1:1 and fixing the

glazed tiles pieces on the plaster inlcuding filling the joints with white

cement including drip mould at peripheri, acid wash, cost of labour, curing

and testing for no leakage etc. completed as directed by the EIC. - First

78 Providing and laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing and shuttering in true line and level etc. but excluding cost of 2.50 Cum 7184.00

reinforcement in RCC work for Copings (Sill bands) for any type of cross

sectional area etc. completed as directed by E.I.C. Second Floor

79 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 5.10 Cum 11570.40

reinforcement in RCC work for Lintel for any cross sectional area...etc.,

completed as directed by E.I.C.- Second floor

80 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 0.70 Cum 12009.20

reinforcement in RCC work for Column for cross sectional area 0.08 to

0.12, complete as directed by E.I.C. - Second floor

81 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 29.80 Cum 10043.90

reinforcement in RCC work for Column for cross sectional area 0.12 to

0.18, complete as directed by E.I.C. - Second floor

82 ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1 Coarse sand : 2 stone

aggregate 20mm nominal size kapchi) IN M-25 including the cost of

necessary formwork, compacting with vibrator, curing, cantering &

shuttering in true line and level etc. but excluding cost of reinforcement in 5.40 Cum 7977.00

RCC work for Wall/Pardi for any type of cross sectional area... etc.,

completed as directed by E.I.C.- Second Floor

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 12 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

83 Providing and laying Cement Concrete 1 : 1 : 2 (1 Cement :1 Coarse

sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25 including

finishing the exposed surface with CM 1:3 (1 cement : 3 fine sand) to give

a smooth and even surface and cantering and formwork and curing for 1.60 Cum 7996.70

RCC work for Chajja not exceeding 10 cm thickness for any level... etc.

completed as directed by E.I.C .- Second floor

84 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 11.30 Cum 10517.40

reinforcement in RCC work for Beams for cross sectional area 0.08 to

0.12 completed as directed by E.I.C.- Second floor

85 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing & shuttering in true line and level etc. but excluding cost of 8.60 Cum 9021.50

reinforcement in RCC work for Beams for cross sectional area 0.12 to

0.18 completed as directed by E.I.C.- Second floor

86 Providing and laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator,

curing and shuttering in true line and level etc. but excluding cost of

reinforcement in RCC work and lead and lift for Parapet wall caps for

any cross sectional area...etc. complete as per detailed structural drawing

and as directed by E.I.C.- Second floor

87 Providing & laying ordinary Cement Concrete 1 : 1 : 2 (1 Cement :1

Coarse sand : 2 stone aggregate 20mm nominal size kapchi) IN M-25

including the cost of necessary formwork, compacting with vibrator, curing

& shuttering in true line and level etc. but excluding cost of

reinforcement in RCC work for Slab for thickness 13 to 15 cms... etc.,

complete as directed by E.I.C. - Second floor

88 Providing & Laying twisted, Factory made Epoxy Coated TMT Bar

reinforcement for Ground Floor FE-500 D of TATA-Tisco, Nilkanth,

Kamdhenu, NRE, National and Galant make for RCC work including

cleaning, bending, binding and placing in position with 16 gauge annealed 15424.00 Kg 88.10

wires including all lead and lifts… etc. completed as per detailed structural

drg & details directed by E.I.C. for Second Floor

89 Providing and laying Brick Work using common burnt clay conventional

building bricks having crushing strength not less than 35 Kg/Sq.cm. in

cement mortar 1:6 (1 cement : 6 fine sand) in true line and level 102.90 Cum 4579.05

including curing, scaffolding, racking out the joints...etc. completed as

directed by E.I.C. - Second floor

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 13 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

90 Providing and laying Half Brick Work for First Floor using common

burnt clay conventional building conventional bricks having crushing

strength not less than 35 Kg/Sq.cm. in cement mortar 1:4 (1 cement :

coarse sand) with 2 nos. of 6mm mild steel round bars after every three

coarse embedded in cement mortar in true line and level in super

structure above plinth level including curing and necessary scaffolding,

racking out joints... etc., completed as directed by E.I.C. - Second floor

91 Providing and applying 20mm thick Double Coat Mala Cement Plaster

work on interior Walls and Ceiling Surfaces comprising of base coat of

12mm thick cement plaster in cement mortar (1Cement : 4 coarsesand) in

rough finishing and 8mm thick top coat of cement mortar 1:2 (1Cement : 1095.90 Sq.m 338.41

2Coarse sand) finished with trovel including scaffolding curing etc.

complete as directed by E.I.C. - Second floor

Providing, Laying & Fixing 6mm thick white glazed tukdi of equal size

pieces for China Mosaic type water proofing treatment, applying

neat cement slurry with waterproofing compound including cleaning

the surface opening the cracks in V grooves pattern and filling the cracks

with silicon sealant in a good manner including brick bat bedding as

directed to have proper slope of 75mm to 100mm or which ever is

required over a layer of C.M 1:3 (1 Cement: 3 Sand) and filling the joints

with C.M 1:3, including finishing the top surface with 15mm thick 248.20 Sq.m 976.20

waterproof cement plaster in C.M1:3 using chemical water proofing

compound as per manufacturers specification including vata of 100mm x

100mm size on inside periphery of the parapet in C.M. 1:1 and fixing the

glazed tiles pieces on the plaster inlcuding filling the joints with white

cement including drip mould at peripheri, acid wash, cost of labour, curing

and testing for no leakage etc. completed as directed by the EIC. -

93 Providing and erecting of Steel work welded in built up sections frames

work including cutting, hoissting, fixing in position and applying a priming

coat of read lead paint with painting two coats of enamle (A) in beams and

joints, channels angles, Tees, flats with connecting plates or angle cleats 7038.40 kg 91.08

as in main and cross beams. Hip and jack rafters, purlins connected to

common rafters anf the like roof etc complete. as directed by EIC

94 Providing and Fixing 6 mm thick Lexan polycarbonate multi wall roofing

sheet fixed with hilti screw and rubber silicon sealer and alluminium strip

of size 50 X 3 mm etc complete as directed by E.I.C.

A TOTAL FOR CIVIL WORKS RS.

B PLUMBING & SANITATION ITEMS

95 Providing and fixing Brass Ball cock (PVC HDP black) 40mm dia. of

approved quality with necessary fittings including fixing in pipeline and 8.00 Nos. 1221.00

testing the same etc... complete as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 14 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

96 Providing and Fixing White PVC Water Tank of required Capacity of

Sintex Pre Antimicrobial White colour including cost of all brass fixtures

& fittings required as per given detail for inlet and outlet connections, air 5000.00 Litre 16.50

vent, cover, testing etc., complete as directed by E.I.C.

97 Providing and fixing concealed plumbing of C-PVC (SDR-13.5) Pipe

having National Sanitation Foundation (NSF) seal for potable water of

40mm Dia. Nominal bore tube fittings and clamps including making good 100.00 Rmt. 447.72

the wall, ceiling and floor etc. complete as directed by E.I.C.

98 Providing and fixing concealed plumbing of C-PVC (SDR-13.5) Pipe

having National Sanitation Foundation (NSF) seal for potable water of

25mm Dia. Nominal bore tube fittings and clamps including making good 125.00 Rmt. 253.82

the wall, ceiling and floor etc. complete as directed by E.I.C.

99 Providing and fixing concealed plumbing of C-PVC (SDR-13.5) Pipe

having National Sanitation Foundation (NSF) seal for potable water of

15mm Dia. Nominal bore tube fittings and clamps including making good 100.00 Rmt. 170.36

the wall, ceiling and flooretc. complete as directed by E.I.C.

100 Providing and fixing 40mm dia Brass Forged Ball Valve of Zoloto/DRP

Brand ISI quality fixing in pipeline and testing the same & make it leak

proof, fix in true level with required nipple / clamp … etc., complete as

directed by EIC.

101 Providing and fixing 25mm dia Brass Forged Ball Valve of Zoloto/DRP

Brand ISI quality fixing in pipeline and testing the same & make it leak

proof, fix in true level with required nipple / clamp … etc., complete as

directed by EIC.

102 Providing and fixing Flush cock of Jaquar make Range Clarion code CQT-

CHR-24081 with wall flange 25mm ceramic disc cartridge with plain knob

including fixing in pipe line and necessary testing… etc., Complete as

directed by E.I.C.

103 Providing and fixing Bib Cock of Jaquar make Range Clarion code CQT-

CHR-23047 with wall flange including fixing in pieline and testing the 25.00 Nos. 1722.10

same… etc., complete., as directed by EIC

Providing and fixing 100 mm dia. Over head shower rose of Jaquar

make code OHS-CHR-1989 Round shape Single Flow (ABS Body

Chrome plated with Grey face Plate) with Rubit Cleaning System fixing in 2.00 Nos. 2027.60

pipeline with CP. Nipple/shower bend & flange and testing & make it leak

proof & flush to wall/ceiling surface etc complete and as directed by EIC.

105 Providing and fixing Wall hung EWC of CERA make Model No S1043158

Carat with Carina Seat Cover Snow White Colour size 500x360x350mm

with concealed P trap including jet spray & P.V.C. pipe connected

including Angular Stop Cock of Jaquar make COP-CHR-057PM including 14.00 Nos. 7735.80

jointing the trap with soil pipe in cement mortar 1:1(1 Cement: 1 Fine

sand) and testing the same etc. complete as directed by E.I.C.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 15 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

106 Providing and fixing Wash Basin Cera make snow white colour Carpio -

S2040213 wash basin with half padestal - S2090142 Category no

S2040213H size 500x410x165 fixing in true line and level with CI or MS

brackets painted with same colour as basin including cost of providing and

fixing CP brass waste coupling of 40 mm dia., PVC waste pipe, 15mm

dia. C.P. Pillar cocK Jaquar make code CQT-CHR-23011 capstan head

C.P. screwed down high pressure with screw shank and back nuts &

rubber plugs, 15mm dia.C.P. Stop cock Jaquar make code COP-CHR-

057PM 15mm P.V.C. connection pipe etc.. complete as ditectrd by E.I.C.

107 Providing and fixing Urinal of Cera make Caravan Pro Flat Back

size 265mmx335mmX695mm of Snow White colour in true line and

level including cost of PVC connection pipe of required length and

dia and 40 mm dia pvc waste pipe including Cera make Urinal

Division Plate Corvin size 130x355x720mm snow white coloured

Code-S4090101 Coloured including Auto closing Concealed Urinal 9.00 Nos. 14770.70

Flush Valve with Wall Flange of Jaquar make PRS-CHR-073 and

Stop cock Jaquar make code COP-CHR-057PM over and above

cleaning and checking the same and making it leak proof etc.

complete as directed by EIC.

108 Providing and fixing 600 mm X 450 mm, 6mm thick Bevelled edge

Mirror of Saint Gobain / Modi guard / Asahi make mounted on 19 mm

plywood sheet and fixed to wooden plugs with CP brass screws and 18.00 Nos. 859.41

washers, in true line & level... etc. complete as directed by EIC.

109 Providing and fixing Square 304-SS Towel rail of size 600mm complete

fixed on wall or Dado tiles with wooden plugs with CP brass screws etc. 18.00 Nos. 616.42

complete as directed by EIC.

110 Providing and fixing PVC Nahni Trap of Supreme make of 110mm dia

inlet and 75mm dia. outlet of self cleaning design including fixing PVC

reducer of 110 mm dia to 75 mm dia., S.S. grating Jali of 150x150mm

size and jointing with using adhesive solvent cement including cost of

cutting and making good the walls and floors as per original etc. complete

as directed by EIC.

111 Providing, laying and jointing in level and slopes 110 mm internal dia.

SWR pipes of Finolex/Prince/Dutron/Astral make for Drainage line in

floors including cost of necessary fittings such as bends, tees, clamps,

rubber packing rings etc., jointing with adhesive solvent cement and 105.00 Rmt. 443.60

making leak proof, testing the line and cutting and making floors and walls

as per original etc. complete as directed by EIC.

112 Providing, laying and jointing in level and slopes 75 mm internal dia.

SWR pipes of Finolex/Prince/Dutron/Astral make for Drainage line in

floors including cost of necessary fittings such as bends, tees, clamps,

rubber packing rings etc., jointing with adhesive solvent cement and 126.00 Rmt. 307.00

making leak proof, testing the line and cutting and making floors and walls

as per original etc. complete as directed by EIC.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 16 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

113 Providing and fixing SW Gully trap of 150mm x 100mm size - P or R

type with CI grating, brick masonry chamber and water tight CI cover with

frame of 300 mm X 300 mm size (inside) with standard weight and Square

mouth traps, including making in true line and level / slope, required 10.00 Nos. 1246.92

excavation / refilling of excavated soil, brick work, plastering and curing

etc. complete as directed by EIC.

114 Constructing Brick Masonry Chamber for underground CI inspection

chamber with Inside dimension 455 mm X 610 mm and 600 To 1800 mm

deep for single pipe line including bricks having crushing strength not less

then 35 kg/sqcm in CM 1:5, C.I cover with frame (light duty) 455mm X

610mm internal dimension, total wt. of cover with frame to be not less

than 38 kg. (wt. of cover 23 kg and wt. of frame 15 kg), RCC top slab with 18.00 Nos. 2932.93

1:2:4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm

size), foundation concrete 1:5:10, inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement slurry on

walls and bed concrete... etc., complete as directed by EIC.

115 Providing and fixing 110 mm dia., PVC Cowl Vent of Supreme make with

working pressure 4 kg/sq.cm including jointing with adhesive solvent

cement including fixing the same in true line and level… etc., complete as

directed by EIC.

116 Providing, lowering, laying and jointing in true line and level / slope

mm dia. rigid PVC pipes of Finolex/Prince/Dutron/Astral make of

working pressure 4 kg/sq.cm for Rainwater Pipeline fitted concealed in

walls including all necessary fittings such as bends, shoe bends etc.,

fixing the same with PVC clamps at 2 meter c/c, jointing with adhesive 288.00 Rmt. 323.50

solvent cement, the cost of all materials, fixing air and water tight, testing

the line including cutting and making floors and walls as per original etc.

complete as directed by EIC.

117 Providing and fixing Kitchen Platform Sink of Nirali make S.S. grade IS-

304, Model Grace Deluxe Medium size 445x365x200mm Glossy finish in

sandwiched kotah stones including cutting holes in walls / stones and

making good the same including Sink Cock with Pipe Swinging Spout

Continental Range code-COP-CHR-347PM of Jaquar make including 3.00 Nos. 10547.00

Stop cock of Jaquar make code COP-CHR-057PM including cost of

providing and fixing CP brass waist coupling of 40mm dia. and PVC

connection pipe of 40 mm dia etc. complete as directed by EIC.

118 Providing and fixing Laboratory Sink of Cera make Model no Cater

S6010103 size 660x460x250mm including Rim in sandwiched

kotah stones including cutting holes in walls / stones and making

good the same including Sink Cock with Pipe Swinging Spout

Continental Range code-COP-CHR-347NPM of Jaquar including 3.00 Nos. 13137.90

Stop cock of Jaquar make code COP-CHR-057PM make including

cost of providing and fixing CP brass waist coupling of 40mm dia.

and PVC connection pipe of 40 mm dia etc. complete as directed by

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 17 of

CONSTRUCTION OF OFFICE-CUM-LABORATORY BUILDING AT

SCHEDULE - B - CIVIL-PLUMBING AND SANITATION

Item No. Rate Amount

Item Description Quantity Unit

119 Providing and constructing double wall SOAK WELL of 2.50m internal

dia. & 5.00m depth internal clear dimension including the cost of

excavation, foundation PCC 1:4:8, honey combed masonry & brick 3.00m

height in C.M. 1:6 (1 cement : 6 coarse sand), casting R.C.C. 1:2:4 (1

cement : 2 sand, 4 graded sone aggregate 20mm nominal size) top slab

120mm thick with RCC Manhole cover 60cm x 45cm size and 75mm dia.

C.I. pipe 1.80m long with 75mm dia cowl vent and filling between the wall

including providing vata in C.M. 1:3 (1 cement : 3 sand), plastering up to

top & outer wall up to 300mm deep from G.L., curing including cost of

reinforcement etc. complete as per detail drawing & as directed by E.I.C

120 Providing and constructing B.B masonry and cement concrete for SEPTIC

TANK of 3m x 0.9m x 1.5m depth internal dimension with excavation and

depositing off the excavated stuff as and where directed including

providing laying brick masonry in C.M. 1:6 (1 cement : 6 sand) with using

common burnt clay conventional building brick having crushing strength

not less than 35kg/sq.m for necessary compartment for chamber and 1.00 Nos. 39760.73

septic tank with necessary inlet and outlet with cement plaster 15mm thick

on wall, I.P.S. flooring, bed concrete, R.C.C. top slab, M.H. cover 600mm

x 450mm of C.I., air vent pipe with cowl vent and cement vata 0f 10cm x

10cm size in C.M. 1:1 etc.. complete as directed by E.I.C.

B TOTAL FOR PLUMBING & SANITATION ITEMS RS.

TOTAL BUILDING COST RS.

Vishesh Consultants

Architects, Vadodara SCHEDULE - B Page 18 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base

1 frame covered with textured/metallic/white front plate modules erected on 168 Point 577.00 582.77

/ in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete.Cat.-III

Point wiring for Modular secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light

2 with accessories erected on Metal / PVC / wooden box covered with 3 mm 170 Point 199.00 200.99

thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with

necessary Lamp holder / ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type erected on PVC /

3 Metallic/Wooden box, single mounting base frame covered with 65 Point 802.00 810.02

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as per pipe 6.00 Point 718.00 725.18

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

For separate Point

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered

4 with appropriate front plate modules erected on / in wall / ceiling as per pipe 4.00 Point 606.00 612.06

erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in wall / ceiling as per pipe

5 erected with following type of accessories. 12 Point 886.00 894.86

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 1 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

6 per site situation directed by Engineer In charge. 25 Each 198.00 199.98

(10) 6/16Amp. Universal socket Cat.III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in wall / ceiling as per pipe

7 erected with following type of accessories. 22.00 Point 1036.00 1,046.36

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with

sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

For Looped on switch board

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge.

(4) TV Co-axial Socket outlet Cat.III

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with

10 textured/metallic /white front plate,modules erected with necessary 25.00 Each. 1122.00 1,133.22

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed . (a) 20 mm. dia.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

17 conductor FRLS PVC insulated stranded wire of green colour for earth 1180 Mtr. 78.00 78.78

continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm(For Lighting Switch board)

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

19 insulated stranded wire of green colour for earth continuity of following size 1050 Mtr. 139.00 140.39

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 2 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

20 insulated stranded wire of green colour for earth continuity of following size 200 Mtr. 183.00 184.83

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

21 insulated stranded wire of green colour for earth continuity of following size 150 Mtr. 323.00 326.23

(A) with medium class Rigid PVC pipe and accessories

(h) 4 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

22 (A) with medium class Rigid PVC pipe and accessories 100 Mtr. 526.00 531.26

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes.(2) 25 mm

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

24 per site situation directed by Engineer In charge. 17 Each 159.00 160.59

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

25 per site situation directed by Engineer In charge. 25 Each 159.00 160.59

(8) Computer RJ-45 socket Cat.III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

26 per site situation directed by Engineer In charge. 25 Each 25.00 25.25

(7) Blank Plate Single Cat.III

27 (19) Modular Indicating Call Bell 8 Each 326.00 329.26

28 (20) Modular Buzzer 8 Each 148.00 149.48

TOTAL OF POINT WIRING

CABLE AND ACCESSORIES

ARMOURED ALLUMINIUM CABLES.

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with

29 necessary clamps or in existing trench / pipe of following size of cables 0 Mtr. 1,388.00 1,401.88

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with

31 necessary clamps or in existing trench / pipe of following size of cables 100 Mtr. 227.00 229.27

(B) 4 core 25 Sq. mm

32 (A) 4 core 16 Sq. mm ( if required ) 50 Mtr. 182.00 183.82

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 3 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 kV. to be laid on wall with

33 necessary clamps or in existing trench / pipe of following size of cables 500 Mtr. 167.00 168.67

(C) 4 core 10 Sq. mm

Supplying & erecting FRLS-XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

34 1.1 kV grade to be erected as directed of following size. 100 Mtr. 144.00 145.44

(a)7 core 1.5 Sq. mm ( if required )

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 kV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of following size

of cable. (A) 3 core 2.5 Sq. Mm

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with

36 necessary clamps or in existing trench / pipe at road crossing or floor of 20 Mtr. 336.00 339.36

following size of cables.(A) 4 core 2.5 Sq. mm ( if required )

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

41 (E) 2 to 4 core 25 Sq. mm(Sigma, MCI, Comet Make Only) 2 Ea. 51.00 51.51

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

42 out going tails, insulating tape etc for following size of cables.

42.1 (G) 3 & 1/2 core 185 Sq. mm (Sigma, MCI, Comet Make Only) 4 Ea. 236.00 238.36

42.2 (F) 3 & 1/2 core 150 Sq. mm (Sigma, MCI, Comet Make Only) 0 Ea. 189.00 190.89

42.3 (E) 3 & 1/2 core 120 Sq. mm (Sigma, MCI, Comet Make Only) 0 Ea. 139.00 140.39

42.4 (C) 3 & 1/2 core 70 Sq. mm (Sigma, MCI, Comet Make Only) 0 Ea. 102.00 103.02

42.5 (B) 3 & 1/2 core 35/50 Sq. Mm(Sigma, MCI, Comet Make Only) 0 Ea. 75.00 75.75

Solderiess crimping type Aluminium Lugs conforming to IS suitable for cable

of following size evenly crimping with high pressure tool & connected to

switchgear terminals with brass/ cadmium plate nut bolts in an approved

(B) 10 Sq.mm (ISI MARKED)

43.1 C) 16 Sq.mm. (ISI MARKED) 8 Ea. 15.00 15.15

43.2 (C) 25 Sq.mm. (ISI MARKED) 8 Ea. 15.00 15.15

43.3 (E) 70 Sq.mm. (ISI MARKED) 4 Ea. 25.00 25.25

43.4 ( I ) 185 Sq.mm. (ISI MARKED) 16 Ea. 80.00 80.80

43.5 (G) 120 Sq.mm. (ISI MARKED) 8 Ea. 45.00 45.45

Supplying & erecting approved make LAN cable of following size in existing

pipe as per direction [C] CAT -

Providing & Erecting approved make following size of TV Co-axial flexible

cable comprising inner conductor of solid bare copper insulated with Foam

PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids

@ suitable coverage overall sheathed with black PVC insulation.

Solderless crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

46 switchgear terminals with brass/cadmium plated nut bolts in an approved 20 Ea. 8.00 8.08

(A) 1.5/2.5 to 6 Sq.mm (ISI MARKED)

Providing and fixing approved make Perforated C type cable tray. Made from

pre- galvanized sheet steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and

47 GI hardware like nut - bolt and washers etc. erected on existing support as 220 Rmt 319.00 322.19

per Specification and as per instruction of engineer in charge..

(3) 150 X 50 X 1.5 mm Thick

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 4 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Providing , erecting , fabricating the M.S. structure as per requirement on

site incorporating proper size of M.S. angles,square,round, flats, bars,

channels, sections complete with cutting, welding, grinding & finishing duly

50 painted with one coat of red oxide with erection on site as per direction of 250 kg 77.00 77.77

engineer in charge with necessary grouting, cementing, plastering & finishing

CABLE AND ACCESSORIES

3.0 LIGHT FIXTURE AND FAN

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

51 capacity between the ranges shown.) 6 Each 751.00 758.51

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV Cat-lll

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

52 (A) Square/ Circular shaped Surface/Recessed Mount Downlight with 95 Each 423.00 427.23

provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV, Surge-2 KV Cat-lll

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 5 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

53 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may 17 Each 218.00 220.18

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV Surge-2 KV Cat-lll

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

54 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may 57 Each 370.00 373.70

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2kV,IP-20, conventional 4 feet Cat-lll

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

55 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have 18 Each 218.00 220.18

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-9 watts,Surge-2 kV Cat-lll

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

Providing and erecting PVC body surface or pendent mounting LED Bulk type

9 watt Lighting Fitting with electronic driver. And lumen output from

luminaire 720lm , input voltage range 90-300VAC , 50Hz cool white(3000 to

56 6500k), inbuilt driver, -20degC to +60degC working temperature, AL frame 0 Each 780.00 787.80

with Beam Angle 120deg

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 6 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

57 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may 20 Each 309.00 312.09

select any wattage capacity between the ranges shown.)

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long Cat-lll

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

58 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may 5 Each 2140.00 2,161.40

select any wattage capacity between the ranges shown.)

(I) Adjustable spot light with COB led having aluminium reflector of following

(iv) 30 Watts Cat-lll

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

59 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may 98 Each 1777.00 1,794.77

select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.IP20(vi) 36 watts, 24" x 24", Surge- 2KV Cat-

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

Supplying and erecting led lamps with following wattage capacity of 220 to

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

60 lamp holders, pf >= 0.5 4 Each 111.00 112.11

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts Cat-lll

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 7 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

mm sweep complete having 3blades with aluminium blades with , canopy &

30 cm. down rod erected with earthing.(Make shall be approved by Engineer

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star

rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery

minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD <

62 10%, with remote unit for Speed Control and all remaining accessories 65 Each 2857.00 2,885.57

including safety pin, nut bolts, washers, temperature rise = 75 degree C

(Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase AC Supply, earthing etc.

Complete as required.[ Make shall be approved by Engineer in Charge] (B)

1200 mm Sweep (48")

Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame.250mm

with 1350 RPM Cat.II (Bajaj, Crompton, Usha Make Only)

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

64 box / Heavy Duty PVC box complete erected concealed in Ceiling with 65 Each 107.00 108.07

necessary finishing.with Providing 2.5mm.thick laminated acrylic sheet to

cover the fan hook or Fan box.

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

65 down rod erected duly painted for fan complete with proper insulation 65 Each 107.00 108.07

without leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab

with Making the site as original.

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt

67 & Nuts erected with necessary hook of 10 mm M.S. Round Bar. 65 Each 98.00 98.98

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and

1000 mm long. Air Termination Base tested for conditioning, Ageing Test &

Lightning impulse current withstand test: 100 kA of 10/350µs waveform in

an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1

protocol with MAST 34mm dia 3000 mm long- Cold Galvanized

TOTAL OF LIGHTI FIXTURES ANF FAN

4.0 STREET LIGHT

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

70 select any wattage capacity between the ranges shown.) 0 Each 4056.00 4,096.56

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal block.IP

(ii)32-40W Cat-lll

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 8 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

71 terminal and arrangement for cable termination to be erected With Suitable 0 Each 17105.00 17,276.05

foundation (Included) as per details given by manufacturer considering site

(H) 9 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm long with

necessary G.I. J Bolts .Approx Pole weight 97 kg

Supplying and laying UPVC cable trunking system comprising unplasticised

polyvinyl, chloride rigid material with ignition free & flame proof confirming

BS with necessary end caps Internal and external bend, flat bends, coupler,

tee etc. All necessary accessories and measuring of following sizes. [1]

mm x 50 mm trunking (MK / LK Make Only)

73 100 mm x 50 mm trunking (MK / LK Make Only) 50 Mtr. 424.00 428.24

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚C within a hour, The water cooler should be

74 comprising of hermetically sealed compressor, fan motor, condensing unit, 2 Nos. 60874 61,482.74

water tank surrounded by evaporating, coil, thermostats, relay etc.complete

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel and ISI Certified.

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump capacity

75 80 psi, mention with 40 psi inline type post carbon filter auto low & high 2 Nos. 28899.00 29,187.99

pressure switches with following size of storage tank & LPH capacity &

erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Providing & erecting stand alone ceiling mount PIR motion Sensor with ABS

Housing single phase AC operation. Complete with Dual element

pyroelectric sensor, Digital Signal Processing Detection Range 14 feet at

feet height, angle 360 degree, RFI and EMI immunity, Detects motion in it's

76 coverage area. Multipurpose device can be used as security device, an 10 Nos. 4323 4,366.23

energy saving device, an automatic switch. Complete with infra red sensor,

Light & sensitivity Sensor, Timer with Bye pass facility. Suitable for 400 watts

electrical load

TOTAL FOR WATER COOLER

8.0 SECTION : SUBSTATION EQUIPMENTS

Providing and fixing printed instruction chart both in English and Gujarati and

77 duly framed with front glasses, for treatment of person suffering from 1 each 129.00 130.29

Electric shock with minimum 50" diagonally size.

Providing pair of rubber hand gloves suitable for working on 11 kV/22 kV

Supplying rubber matting of following thickness as per IS:15652/IEC

Supplying stand first AID box with antiseptic cream, medicine for use on

wounds due burn, crepe bandage, gauge bandage, medicated ready to use

80 bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic 2 each 297.00 299.97

solution (Savlon or similar) etc. (All above contents shall be of standard

Supplying FIRE bucket round bottom of 9 litres capacity made out of

gauge G.I. sheet with extra handle at bottom duly painted white inside and

Red out side with FIRE mark, filled with dry-sand and kept on existing stand

provided or hung on wall hook.

Supplying and erecting floor mounting stand for keeping four nos. of FIRE

buckets comprising 1500 mm in length, 900 mm height frame made out of

82 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 1 each 933.00 942.33

hooks and duly painted with one coat of red lead and two coats of approved

enamelled silver paint.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut &

bolts grouted in wall complete.

[A] For 4.5 Kg Capacity

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 9 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as

84 per IS 13849 or 1 Kg capacity with necessary clamp for erection on wall 10 each 1527.00 1,542.27

TOTAL FOR SUB STATION EQUIPMENT

9.0 SECTION : EARTHING

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber

and heavy duty cover (A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by

[C] For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA)i.e. independent Earthing located in other than

normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable

for safe earthing device.

Providing and erecting required size HOT deep Galvanised iron strip for

88 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using 350 KG. 77.00 77.77

Providing and erecting required size Copper strip for earthing of H.T. OCB /

89 ACB/ Transformer, LT panel board, Motors etc. using copper clamp. 100 KG. 787.00 794.87

Providing and erecting HOT deep Galvanised iron strip/wire 4.064 mm to

TOTAL FOR EARTHING

10.0 MCB DB AND PANEL ASSECORIES

Design, Supplying, installing, testing of factory fabricated ready made Three

phase APFC Panel Cubical Panel fabrication should be type tested as per IEC

61921, 61439:1&2 Capacitor Duty Contactor for switching as per following

Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC,

SC, internal earth fault protection Incomer Switch of MCCB type

Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault

protection,Copper tinned insulated Busbar,Cubical panel should be indoor

type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt

91 Capacitor,De tuning Reactor for each capacitor,Panel having Short Circuit and 1 each 141527.00 1,42,942.27

Overload protection,Each step Capacitor having suitable MCB with Sc, OL,

internal earth fault relay,Each stage having Stage Contactor (Capacitor load

rating),PF regulator master controller having suitable steps with LCD display,

Rs 485 Communication port, Indication LED Lamps for main incomer and ON-

OFF for each capacitor bank,MS Chanel for Floor mounting, Cable entry as

per site situation,Cooling fans for panel

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 10 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated indoor type cubical panel board having IP42 & above

protection as per require made from 2 mm. thick CRC M.S. sheet for outer

body & doors, 1.5 mm. thick CRC M.S. sheet for internal partitions with

necessary supporting angles, flats including skirting, bending, drilling,

welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-In-Charge with erection of supplied switchgears,

busbars with suitable size of interconnecting PVC copper wire / Copper-

Aluminium strips, rubber gromets, rib, control wires, backelite control fuses,

measuring instruments, earth bus & earth bolts, foundation flange-bolts-

base plates, sufficient nos. of hinged doors, handle with locking

arrangement, rubber gasket complete with Required Nos. heavy Duty

92 Connector. heavy duty end terminal connection,danger notice 8.00 Sq.mtr 16230.00 16,392.30

board,necessary ventilation,earthing strip complete.The panel shall be

supplied with Seven Tank chemical process which shall be carried out before

applying painting, painted with powder coating. (The rates excludes the cost

of switchgears, busbars, interconnecting mains & Copper / Aluminium strip,

fuse, meters etc. The dimension shall be measured excluding base beams)

Factory inspection for verification of quality,workmanship and as per

drawing & testing before dispatch the material as per tender condition. The

standard companies switch gear shall be used and only manufacturers at

CPRI approved factory as per IEC 61439 and shall be certified by that

company whose switch gears are used after fabrication for beneficial use.(C)

The standard companies switch gear shall be used and only manufacturers as

per IEC 61439 for beneficial use. With 350 mm depth

Panel manufacturer have to give 3 years maintenance and service support if

in case of breakdown or fault. Panel manufacturer have to submit electrical

meter calibration report. Agency should design the panel in such a way that

there should not be any excess in panel area (sq.mtr) & length of bus bar

(mtr), if any excess occurs draw attention at the time of approval of G.A.

drawing. Loading and unloading of above item shall be done by hydra and

skill work force under supervision of electrical engineer and guidelines

given by manufacturer to avoid damage to the item. Picture of it to be

submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by agency's

engineer before giving order. If found any problem in size discuss with

concern client engineer for rectification before giving order. [Including

93 Necessary numbering / marking on PANEL done with red colour radium

sticker as per site requirement and instructions given by site engineer /

client on site.

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting

Aluminium Busbars with four equal Nos. of bus having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main 10 Rn. Mtr. 654.00 660.54

cable socket to each busbar,erected in existing cubical panel with necessary

(A) Suitable for 100 Amp. Capacity

(B) Suitable for 200 Amp. capacity

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic release suitable to

work on A.C.supply 50 Hz. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.housing Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

96 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 8 Each 803.00 811.03

having following capacity [c] 63 Amp. Cat.-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

97 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 26 Each 728.00 735.28

having following capacity(b)40 Amp. Cat.-III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity

(c)63 Amp. Cat.-III

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 11 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS 8828/1996 with ISI Mark .

Cat.III. [For Panel & 3 phase DB ]

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (ii) For

40 Amp. DP Cat.-III

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (i)

Amps.DP Cat.-III

Providing and erecting following additional parts for panel mounting MCCBs

102 (A)Extended operating rotary handle with pad lock with three position 2 Each 952.00 961.52

trip,off,on suitable for 25A to 250 A panel mounting cat-III

Approved make Earth fault Relay suitable to mount with inter connection to

moulded case circuit breaker having CT ratio & MCCB rating as following

103 along with shunt trip 220 V AC with all internal connections & complete 3 Each 5427.00 5,481.27

erected in existing M.S.housing. (2) 125 A -200 A , CT Ratio 1/200

Supplying and erecting approved make set of indicator lamps of LED type

104 lamp, lense cover, Bakelite holder complete erected with necessary 6 Each 43.00 43.43

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC

105 Supply 500 V on existing panel board with necessary connections. 1 Each 314.00 317.14

Supplying & erecting approved make Power Factor Meter 150mm dia

flush/projection type/ balanced & unbalanced load to work with

106 appropriately provided CT’s 100/5A to 400/5A ratio & other accessories 1 Each 5052.00 5,102.52

complete erected in M.S. box & connected to the circuit by means of PVC

copper Core leads.

Supplying and erecting approved make panel mounting type Digital

Ammeter having 3 digits LED display, external CT operated, calibrated for

107 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel 1 Each 1543.00 1,558.43

board with all connection, wiring etc .with manufacturers calibration

Supplying and erecting approved make panel mounting type Digital

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc .with manufacturers

calibration certificate.

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

109 appropriate nos. of MCBs.(The DBs should be used of same company of MCB 1 Each 2885.00 2,913.85

to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (ii)6 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

110 appropriate nos. of MCBs.(The DBs should be used of same company of MCB 9 Each 3379.00 3,412.79

to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

111 appropriate nos. of MCBs.(The DBs should be used of same company of MCB 1 Each 3836.00 3,874.36

to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (iv)12 way

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 12 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT AAU, KANSARI

SCHEDULE B - ELECTRICAL

SR No ITEM DESCRIPTION Qty Unit RATE RATE WITH 1% L.C.

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS:694, IEC - 227 erected in existing pipe of following size

112 (Specifically for control panel, relays, power switchgears, motor starters & 200 Mtr 114.00 115.14

control wiring) with required size of copper lugs, nuts and bolts if required.

[f] One wire 10.00 sq. mm [For Panel Interconnection & Earthing ]

113 (b) One wire 1.50 sq. Mm 150 Mtr 17.00 17.17

114 (c) One wire 2.50 sq. mm 80 Mtr 27.00 27.27

115 (d) One wire 4.00 sq. mm 50 Mtr 37.00 37.37

116 (e) One wire 6.00 sq. mm 50 Mtr 56.00 56.56

117 (g) One wire 16.00 sq. Mm 50 Mtr 141.00 142.41

118 (e) One wire 70.00 sq. mm 20 Mtr 663.00 669.63

TOTAL AMOUNT OF MCB DB AND ACCESSORIES

TOTAL AMOUNT OF MCB DB AND ACCESSORIES

TOTAL FOR ELECTRICAL

Vishesh Consultants

Architects, Vadodara Schedule - B - Electrical Page 13 of

Name Of Work- CONSTRUCTION OF OFFICE CUM LABORATORY BUILDING AT

SCHEDULE - B - VRV AC

Sr.No DESCRIPTION QTY UOM RATE AMOUNT

1.1 Outdoor Unit (DAIKIN MAKE)

44HP TOP DISCHARGE, COOLING ONLY

1.2 Indoor Unit -

1.2.a Hi-wall with Receiver and Remote

1.3 REF JOINTS 20 Nos. 3500

SUB TOTAL ( HIGH SIDE ) Without tax

Installation Of Units With VRV System

Installation of Variable Refrigerant

1.1 Out-door units - 44HP 1 Nos. 60000

Out Door Unit Loading , Unloding

, Lifting , Shifting , Installation &

Testing With Commisioning

And Required gas Top Up With

vacuming, lifting and shifting

1.2.a Hi-wall with Receiver and Remote 26 Nos. 2500

Supply & Installation of the following

components of VRV

Refrigerant piping between indoor &

a outdoor units. Refrigerant pipes should 1 LOT 450000

be insulated - Aprox

Control cables between indoor and

outdoor unit - Aprox

PVC Drain Pipe For The Units - Aprox

SUB TOTAL ( Low Side ) Without tax

Vishesh Consultants

Architects, Vadodara Schedule - B - HVAC Page 1 of