RRD on Kun Galoo to Baroha Ropa Matyal road km. 0/00 to 2/800 (SH- P/L interlocking paver block in km 1/650 to 1/720 and Repair of pot holes, steel grating in various Rds Between km. 0/00 to 2/500) Unde PDNA

Stone soling properly hand-packed filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm (one hundred millimetre) spread thickness (finished work including materials and labour) including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer - in- charge .

Providing and laying 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty millimetre nominal size) concrete for plain/reinforced concrete in open foundations and curing complete including form work as per drawing and technical specification clauses 802, 803, 1202 and 1203 including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-charge.

Providing and laying 80mm (sixty millimetre) thick faciory made cement concrete interlocking paver block of M -30 (M-thirty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer-in-charge.

Providing and laying Plain cement concrete in foundation and plinth including form work complete as per drawings and technical specification clauses 802, 1202 & 1203 P.C.C. grade M-20 (twenty) design mixed including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer-in-charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN (Eighty- hundred Kn) in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-III as per Technical Specification Clause 405 By Manual/Mechanical means including carriage of materials with in all leads, lifts and other incidentals.

Random rubble masonry in cement mortar for substructure complete as per drawing and technical specification Clause 702, 704, 1202 and 1204 in cement mortar 1:6 (One cement : six sand) including carriage of materials with in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and applying primer coat with Bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 Per Kilogram/ Per square metre (Zero point seven zero to one point zero kilogram per square metre) using mechanical means as per Technical Specification Clause 502 including hauling/ carriage of materials through all modes of transportation with in all leads and lifts of materials and other incidentals.

Repair of pot holes and removal of loose material trimming of sides cleaning aof surface by providing primer coat,20 mm thick premix carpet and seal coat as per Technical Specification Clause 1904.2,503 and 508.1 including hauling/ carriage of materials through all modes of transportation with in all leads and lifts of materials and other incidentals.

Providing concrete for plain concrete 1:3:6 (One cement : Three sand : Six graded stone aggregate) Mechanically Mixed in open foundation and curing complete including form work as per drawings and technical specification Clause 802, 803, 1202 & 1203 including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials with in all leads, lifts and other incidentals.