Annual Stage Contract of Routine Maintenance works in Associated Hospital Govt. Medical College Baramulla for the year 2025-26

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed (all kinds of soil)

Supply and filling of dry stone soling in foundation trenches/under floors tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size Crushed

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size) including curing complete including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof course 50mm thick withcement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) including all carriages.

Providing and laying damp-proof course 40mm thick withcement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) including all carriages.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for columns,pillars,piers,abburtments,posts and struts including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for stairs (excluding landings) except spiral staircases. including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages.

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages.

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class Deodar wood including all carriages..

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) imported Kail wood including all carriages

Providing wood work in frames of false ceiling , Partitions etc. Sawn and fixed in poisition in budloo wood including all carriages.

Providing and fixing 35 mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class Kail wood including all carriages.

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood including all carriages.

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages.

Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan board both sides laminated as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) in fittings First. Class imported wood.

Providing and fixing 32mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including cost of 25-35mm thick paneling of approved design with required beading/moldings. First. Class imported wood.

Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws Readymade ornamental modular, factory manufactured machine made of hard wood teak finished, of approved quality, color and shade.

Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick ply decorative both sides laminated board as per the approved design with complete with required beading/moldings. (styles and rails shall be of standard size) First. Class imported wood.

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood

Providing hoisting and fixing trusses/purlins/ rafters/posts/post- plates, false ceiling , Partitions etc. Sawn and fixed in poisition or like components including cost of screws etc. complete First class Poplar wood including all carriages.

Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete. First. Class imported wood.

Providing and fixing of wooden paneling/ lining of 12mm (net thickness) including providing and fixing of ground frame work (50x25mm or as specified) of first class Budloo wood including cost of screws, wooden plugs, Touchwood etc. complete as per directions of EIC made from export wood

made from Budloo wood

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately Changez Khani

Chaar Gul

Chaar Phool

Pahal garden

Dawaz-dal-i-girde

Paanch Murabah

Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places. 4 mm thick

6 mm thick

12 mm thick

19 mm thick

Providing and fixing water proof BWR/ BWP ply wood ISI marked including cost of nails adhesive etc. complete at all places. 6 mm thick

12 mm thick

19 mm thick

Providing and fixing of single side laminated ply wood including cost of nails adhesive etc. complete at all places. 6 mm thick

12 mm thick

18 mm thick

Providing and fixing of 19mm thick commercial block board at all places including cost of nails and adhesive complete. Thickness/ Pattern/ Design to be approved by EIC.

Providing and fixing of 1mm thick Dulmica/ sun mica sheeting including cost of nails and adhesive complete.

Providing and fixing of ornamental cornice of following size.1st class budloo/imported wood. 40-50 mm face

65 mm face

75 mm face

Providing and fixing of PVC edge beading of size 25x25mm

Providing and fixing 20mm thick overlapped weather boarding in soffits of 1st class imported wood including applying priming coat of approved quality primer.

Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class imported wood.

Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class Budloo wood.

Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class Kail wood.

Providing and fixing of wooden beading ornamental 25mmx6mm size of Budloo wood.

Providing and fixing of wire gauze using galvanized M.S wire gauze of average width for aperture 1.4mm with wire of dia. 0.63mm for doors windows and clearstory windows including cost of beading complete.

Providing and fixing of MS Mesh 25x25mm wherever required of specified size including cost of beading and nails complete.

Providing and fixing of glass panes with wooden fillets of required size wherever necessary. Glass panes 3.5mm thick weighing 8.70 Kg / sqm.

Glass panes 4.0 mm thick weighing 10.0 Kg / sqm.

Glass panes 5mm thick weighing 12.5 Kg / sqm.

Providing and fixing of reflective glass panes 4 / 3.5 mm thick in doors windows and clearstory windows including cost of budloo wood beading of required size.

Providing & fixing corrugated G.S. sheet roofing fixed with nails with bitumen and G.I limpet washers /self-drilling screws with washers/J- Hooks (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses 0.63 mm thick with zinc coating not less than 275 gm./Sqm

0.50 mm thick with zinc coating not less than 275 gm./Sqm

Providing & fixing colour coated (Hi-Rib) G.I sheet roofing 0.50mm thick incl. vertical/curved surface fixed with polymer coated J or L hooks bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washer and over lapping of sheets complete in horizontal vertical trusses incl. cutting to size and shape wherever required including Ridges or Hips of 60 cm overall width colour coated sheets 0.50mm thick and valleys of 90 cm width colour coated sheets 0.50mm thick etc complete as per the directions of Incharge Engineer. including all carriages.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing Tiled/GRID false ceiling of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paintpaint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 10-12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

10-12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, (or as per directions of EIC) backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing.

Providing and fixing at all height false ceiling including frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zine coating of grade 350 as per IS: 277 and consisting of angle cleats of size 25mm wide × 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm din x 40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm e to G.channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every SQM junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long. the perimeter of ceiling fixed to wall/partition including jointing and fixing to a fush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I

Removing of damaged and providing and fixing at all height false ceiling incl. frame work made of special sections power pressed from MS Sheet and galvanized in accordance with zinc coating of grade 350 as per IS :277 and consisting of angle clents of size 2mm wide x1.60mm thick flanges of 22mm and 37mm at 1200 center to centre one flange fixed to ceiling with dash fastener 12.5mm x 40 mm long with 6mm dia bolts to the angle hangers of 25x25x0.55 of required length and other end of angle hanger being fixed with nut and bolts to Gi channels 45x15x0.9mm running at the rate of 1200mm center to center to which the ceiling section 0.50mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450 center to center shall be fixed in direction perndular to Gl channel with connecting clips made out of 2.64mm dia x 230mm long GI SOM wire at every junction incl.fixing the gypsum board with ceiling section and perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long ,the perimeter of ceiling fixed to wall /partition with the help of rawl plugs at 4500101 center to center with 250101 long drive all screws @ 2300101 interval incljointing and fixing to a flush finish of tapered and squre edges of the board with recommended filler Jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also incl. the cost of making openings for light fittings ,grills diffusers all complete as per drawings and specifications 12.5mm thick tapered edge gypsum board incl all primer and painting complete job

Providing and fixing of acoustic insulation with 24 gauge G.I net wire netting mesh or frame with G.I stipules etc. 50mm thick filled in polythene bags.

100mm thick filled in polythene bags.

150mm thick filled in polythene bags.

Providing and fixing of jute fabric as per approved sample with bituminous paint complete.

Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and carriages but excluding cost of nosing of steps etc. complete. 40 mm thick 20mm nominal size stone aggregate (crushed)

50 mm thick 20mm nominal size stone aggregate (crushed)

Providing and fixing 1st quality ceramic glazed Digital tiles conforming to IS: 13753 of minimum thickness 5mm of approved make in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing of Interlocking/Chequered precast cement concrete tiles colored(rubber finish) in foot paths & courtyards jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and cleaning etc. complete on 20mm thick layer of dry sand .40mm thick.

50mm thick.

75mm thick.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Size of tile 800x800 mm

Size of tile 1000x1000 mm

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 500x500 mm

Size of tile 600x600 mm

Size of tile 800x800 mm

Size of tile 1000x1000 mm

Providing and laying polished anti-skid vitrified floor tiles of various sizes (thickness to be specified by the manufacturer) approved make like NITCO, JHONSON, KAJARIA in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand) including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. including moulding complete at all levels. (Black Granite-Jet Black) of approved quality.

(GREY type Granite) of approved quality.

(Maroon type/similar Granite) of approved quality.

(White marble) of approved quality.

(Green marble) of approved quality

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble 16mm thick

Granite of any colour or shade 18mm thick

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble Work

Providing and fixing of laminated board flooring AC4 using HDF solid core planks of specified thickness approved quality and color with tongued and grooved jointing including cost of thermo cot and other accessories complete. (to be approved by EIC) 8mm thick

Providing and fixing of MDF cornice 25mmx20mm In size.

15mm thick cement plaster on brick /concrete wall of mix 1:6 (1cement: 6 fine sand)

15mm thick cement plaster on brick / concrete wall of mix 1:4 (1cement: 4 fine sand)

12mm thick cement plaster on half brick / concrete wall of mix 1:6 (1cement: 6 fine sand)

6 mm thick cement plaster on concrete wall of mix 1:3 (1cement: 3 fine sand)

Cement plaster skirting upto 30cm height with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and curing complete.18 mm thick

Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying cemement based wall putty 1mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying cemement based wall putty 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Removing painting by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Removing white or color wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Removing lime punning/POP from walls including sand papering and disposal of rubbish as directed etc. complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications Two or more coats on new work

One or more coats on old work

Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade. New work (two or more coats applied @ 3.84 kg/10sqm) including cost of priming coat @0.80 liter/Sqm

Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/10sqm) complete including all carriages

Applying priming coat with ready mixed white primer of approved brand and manufacture on wood work.

Applying priming coat with ready mixed zinc oxide chromate primer of approved brand and manufacture on steel galvanized iron/steel works.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with Acrylic smooth exterior paint of required shade: Old work (one or more coats applied @ 0.90 liters/ 10sqm)

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Dismantling of existing chain link fencing, steel work complete, including stacking of serviceable material and disposal of unserviceable material within a lead as directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead.

Dismantling of C.G.I. sheet roofing and stacking of serviceable material and disposal of unserviceable material within a lead as directed by the in- charge engineer.

Dismantling of existing wooden ceiling including stacking of serviceable material and disposal of unserviceable material as directed with all leads complete.

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead Of sectional area 40 sqcm. and above.

Dismantling of existing window shutters carefully without breakage including stacking within a lead as directed by the in-charge engineer.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work in cement mortar up to floor V level including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC.

Demolishing of rubble stone masonry in cement mortar including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Powder coated aluminum (minimum thickness of powder coated 50 microns)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness.

Providing and fixing machine molded ACP covering of approved pattern & design, made out of machine cut aluminum sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia. and 75 mm long bolt including providing aluminum washers 2 mm thick & 15 mm dia. at a staggered pitch of 200mm Centre to Centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. ACP 3.5mm thick of required color

ACP 4.0mm thick of required color

Providing and laying G.S.B. grade including compacting, watering and consolidation with power road roller to the required gradient and camber including all carriages of material complete.

Providing and laying G.S.B. grade including compacting, ramming, watering and carriage complete.

Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete.

Supplying and Filling earth, including carrying by lorry, placing, dressing and ramming in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with ½ tone roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power road roller of minimum 8 tones, filling in ground depressions, Including of all carriages from source to site complete. complete job

Engagement of tipper for removal of mulba etc including fuel charges complete.

Engagement of excavator (JCB) in all terrains including fuel charges complete.

Engagement of hand cart

Providing and fixing of locks Godrej/Link make for ward robe, almirah, drawer

Providing and fixing of aluminum double channel with wheel set for sliding glass window of approved quality of following sizes. 20 mm

Providing and fixing of door closer capsule type of standard make

Providing and fixing of door closer spring type of standard make

Manufacturing and fixing of computer tables of required size and height of 19mm thick solid core ply board, exposed surface to be laminated with Dulmica sheeting including cost of key boards (readymade), racks drawers, cupboards, cost of brass knobs / Godrej locks and other necessary fittings and fixtures of approved quality and make. (Measurements be made on top surface only) 600mm deep

Providing and fabrication of storage Almirah (ornamental) of approved quality 19mm Ply board in sides, shelves and wherever required including 6mm ply wood on back and 19MM pine board ply wood in shutters, inside and outside of shutters finished with Dulmica sheeting of approved quality and color on exposed face of approved design and drawings including painting two or more coats of synthetic enamel paint of approved quality and color inside including cost of following aluminum fittings and locks of Godrej/Link make.15mm dia. M.S. pipe chromium plated with necessary brackets 4'-0" length and including all other necessary accessories complete in all respects. (For payments front face to be measured). 60 cm deep

45 cm deep

Supplying and fixing of rolling shutters of approved make made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade No:2 and M. S. top cover of required thickness for rolling shutters (80x1.25mm M.S Laths with 1.25 mm thick top cover)

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying priming coat of approved steel primer

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Supply ,installation , testing and commissioning of 1.5 HP water lifiting motor including all necessary fittings labour charges / dismentalling of old one with all carriages comlete.

Supply ,installation , testing and commissioning of 1 HP water lifiting motor including all necessary fittings labour charges / dismantalling of old one with all carriages comlete.

Scientific cleaning and sterlization of water storage tanks the job involves six stages of cleaning ie; cleaning and sterlization process consisting of mechanical de-watering high pressure ,cleaning sludge removal ,vaccum cleaning ,anti bacterial spray and finally killing of suspended and fluting bacteria by ultra voilet raidations as directed by engineer in charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid including all carriages

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proofcoupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Cera, Parry ware complete.

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.610x460mm bowl depth 200mm (standard make approved by EIC).

Providing and fixing 600x450mm beveled edge mirror of specified brand

Providing and fixing beveled edge mirror of specified brand Circular shape 450mm dia.

Rectangular shape 450x600mm.

Oval shape 450x350mm

Providing and fixing of C.P grating 100mm size. ISI marked complete.

Providing and fixing of G.I pipes (class B pipes Prakash Surya/ Jindal or equivalent) complete with all necessary G.I fittings and clamps including cutting and making good the walls etc. Internal & External work 15mm dia. Nominal bore

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

40mm dia. Nominal bore

50mm dia. Nominal bore

Providing and fixing of PVC connection with C.P. brass unions 300mm long.

450mm long

600mm long

Providing and fixing ball valve (brass) of approved quality complete (Leader/ Saint/ equivalent Make) 15mm dia.

20mm dia.

25mm dia.

40mm dia.

50mm dia.

Providing and fixing gate valve (brass) of approved quality complete (Leader/ Saint Make/ equivalent Make). 15mm dia.

20mm dia.

25mm dia.

40mm dia.

40mm dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Construction of platform for W.C. with brick masonry in cement mortar 1:6 mix. Including filling of sand and providing of 15mm cement plaster in 1:4 mix.

Providing and fixing of C.P. Cups for C.P. fittings.

Providing and fixing of C.I. manhole cover heavy duty of following sizes. 12"x12"

SProviding and fixing of water heating geysers of approved brand & quality (Venus/ Jaguar/ Racold or eqviuallent) with all necessary fittings and fixtures complete Job. 50 Ltr capacity including all costs and cariages complete

35 Litre

25 Litre

Providing and fixing Geyser elements (as per Geyser type)

Providing and fixing Geyser thermostat of approved quality complete.

Providing and fixing C.P. brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore short body.

Providing and fixing of 15mm size chromium plated brass pillar cock of approved quality. (Jaguar- continental/Marc/Hindware-contessa plus/equivalent)

Providing and fixing of 15mm size chromium plated cast brass angle valve of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with wall flange

Providing and fixing of 15mm size chromium plated cast brass wash basin mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent)

Providing and fixing of 15mm size chromium plated cast brass sink mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with flange.

Providing and fixing of 15mm size chromium plated cast brass wall mixer Non telephonic with lead of approved quality. (Jaguar-Continental/Hindware- contessa plus/equivalent) with flange

P/F Towel ring 20mm dia. (Jaguar-Continental/Hindware-contessa plus/equivalent) with flange

P/F Towel rod (Jaguar- Continental/Hindware-contessa plus/equivalent)

P/F Stainless Steel Soap Dish holder.

P/F Plastic Soap Dispenser wall mounted of size 400ml

P/F Plastic Tissue Dispenser wall mount of size, shape and colour as approved by engineer in charge

P/F Fully Automatic, coin operated Electronic Sanitary Napkins Vending Machine (50 Napkins Storage Capacity) Made of CRC Anti-Corrosive Powder Coated Steel (MS) wall mount Aluminium Coin Acceptor with Sensor,lockable body of size, shape and colour as approved by engineer in charge

Providing and fixing 600mmx120mmx5mmglass shelf with edges round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete.

C.P./PVC Long bends of required size of approved quality.

C.P. Waste for wash basin of approved quality

Providing and fixing of pvc manhole cover of approved make of following sizes. (Heavy type) 12"x12"

Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC.

Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness.

Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. Inside size 90 x 90 x 90cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.

Inside size 60 x 60 x 60 cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.

Inside size 45 x 45 x 45cm deep including RCC/C.I. manhole cover medium duty with frame of size 45x45mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.

P/F of Rain Gutter made of superior quality and gauge of tin sheets of different colours including fixing of clamps,nuts,washers etc incl fixing of 75mm dia pvc pipe btype for disposal of rainwater upto all floor levels as directed by eic

Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type "B") in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation incl. all fittings & fixtures complete job

150mm dia. Pipe

100mm dia. Pipe

75mm dia. Pipe

50mm dia. Pipe

Providing and fixing of Health Faucet/jet spray with plastic flexible pipe 8 mm dia, 1.5 m long, wall hooked complete as required, including necessary Accessories, installation charges and complete in full respect as per the directions of Engineer- in-charge.

Providing and fixing spindle 15mm dia. All types like washer type/disc type etc.

Providing and fixing Mixer leg set (Jaguar/Mark/Cera)

Providing & Replacing of Siphon to flushing cistern Cera/Hindware make

Providing & Replacing of ball cock of flushing cistern without float

Providing & Replacing of ball cock of flushing cistern with float

Providing & fixing of polycarbonate corrugated sheets of approved make incl. cost of nails complete job

Providing & fixing of PVC polycarbonate plain sheets of approved make incl. cost of nails complete job

Providing & fixing of pvc panelling 10mm of approved make including all related accessories like corner/top flashing, etc complete including grounds, including fixing, screwing, and G.I frame work etc complete

Providing & fixing wallpaper of approved pattern & quality to wall surface including chemical & adhesive as per directions of EIC

Providing & applying of Touchwood on old work including preparing the surface, rubbing,sand papering all complete job.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4)

PN-16 pipe , 20mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc. PN-16 pipe , 20mm OD (SDR-7.4)

PN-16 pipe , 25mm OD (SDR-7.4)

PN-16 pipe , 32mm OD (SDR-7.4)

PN-16 pipe, 40mm OD (SDR-7.4)

PN-10 pipe , 50mm OD (SDR-11)

PN-10 pipe , 63mm OD (SDR-11)

Providing and fixing PPR Unions PPR Union 20mm

PPR Union 25mm

PPR Union 32mm

PPR Union 40mm

PPR Union 50mm

PPR Union 63mm

Providing and fixing PPR ball valves (RAK/ Astral/ Prince or equivalent) for 25mm dia.

for 32mm dia.

for 40mm dia.

for 50mm dia.

for 63mm dia.

Providing and fixing of thermal insulation over following dia G.I Pipes at all heights. for 15mm dia.

for 20mm dia.

for 25mm dia.

for 40mm dia.

Providing and fixing C.P. 2 in 1 brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore

Providing & fixing G.I chain link fencing of approved size 50mmx50mm (3.15mm thick) including necessary bolts, welding etc complete

Providing & fixing various sizes of 15mm CP Nipples

Providing and laying on terrace upto floor five level lime concrete with graded brick agg. 25mm nominal size and 50% mortar comprising of 1lime putty: 2surkhi and curing complete.

Providing and fixing of Vertical blinds of required color as approved by EIC

Repair of existing vertical blinds including removing,repairing and installation of same all accessories complete job

Providing and fixing of roller blinds of required color as approved by EIC

Supply Installation , testing and N o Commissioning of kent pride plus KENT pride plus water Purifier with In-Tank UV Disinfection uto;osomg RO+UF+TDS Control Purification process with a storage capacity of 8 liters and output discharges of 15 It/Hr abd abd external prefitted bowl of same kent brand all complete

Upholstery to the sofa sets/single seats by way of removal of wornout polishable regzine, cloths, cushions,linings ,springs etc.and upholstery by new regzine of superior quality ,foam of high density (32D) ot appropriate thickness (100mm for seat,50mm for back support and 12mm for profiling )incl.replacing of demaged springs. (all materials involved to be approved by engineer in charge incl.cost involved for labours for displacement of sofa sets from rooms to working space area and vice versa complete job.

P/F of curtains velvet based crewel type/ embroyered silk / cotton nylon mix fabric as directed including stitching charges,cost of eyelets including all carraiges of 1.2m width complete as directed by Engineer incharge Velvet Based crewel type

Embroyered silk type

Cotton/nylon mix fabric type

P/F curtain rods of stainless steel of required size & pattern of approved make and stainless steel brackets,stainless steel end brackets of required design & pattern with necessary fittings & fixtures complete as directed by Engineer incharge.

Supply wooden roll of Honour board of required size with brass letter writing. (incl. fixing & carriage complete. as directed

Clearance & testing of PVC Rainwater pipes, CI pipe network incl joints upto Manholes (rate include two separate operations per year after every six months) by way of removing blockades if any incl disposal of unwanted material repairing of leakages by silicon sealant etc and necessary realignment wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job.

Removing of damaged PVC Rain water pipes and Providing and fixing 100 mm P.V.C Rain water Pipes, vent pipes (Prince B-type) ISI mark including all fittings with or without access of any degree ie bends, junctions, cowls, offsets, access pieces, holder bats and clamps for suspended pipes in ceiling, stays, Vertical walls etc and jointing with solvent/seal joints and at all floor / roof top levels including removing of ACP Cladding and refixing the same where required with necessary scaffolding / staging as directed by the Engineer-in-charge.

Cleaning & testing of gutters (rate include two separate operations per year after every six months) by way of removing of accumulated debris, vegetation, weeds waste and unwanted material if any incl RM disposal of wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job. (measurement to be taken for Gutter length only)

Repair work of gutter joints in (Alluminum as well as GI Troughs) (rate include two separate operations per year after every six months) by way of repairing of trough joints by adhesive Duco putty, silicon sealant (exterior grade etc and incl necessary realignment wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job.

Removing of damaged aluminum trough & Providing and fixing of Aluminum gutter (22 gauge) as per design and shape with necessary scaffolding / plate form upto floor 4 levels including cost of necessary screws, sealing of joints by adhesive (Duco putty), silicon sealant etc to make it leak proof all complete.

Providing/ fixing aluminum composite sheet cladding (exterior grade) in vertical / horizontal surface using 4mm thick sheet, the sheet shall be bent to shaped profiles as required including perimeter extrusion base frame extruded stiffeners 2.5mm to 3mm ss expansion fastners and silicon sealant (dow coming 789) all backup arrangements required for installations including scaffoldings required upto all floor levels complete job.

Removing of damaged and providing and fixing of necessry aluminium and stainless steel hardware fittings with necessry screws etc complete in all respects to thesetisfaction of incharge Al fittings handle 250mmx10mm

handle 150mmx10mm

hadle 125mmx10mm

handle 100x10mm

stainless steel fittings

towe bolt 300mmx10mm

tower bolt 250x10mm

towe bolt 200x10mm

tower bolt 150mmx10mm

P/F of fixtures of approved make with necessery sctews extra complete in all respects Brass handle 175mm long

SS Butter fly L drop

Door stopper

bed socket for almirah

Providing and fixing of Kadi Tala (6 lever ) 2 in 1 lock with Al-drop of size 200mm ISI marked with colour coated with necessary screws etc complete in all respects to the satisfaction of engineer in charge. (200mm )

Providing and fixing of Capsule type Door Closer with necessary screws etc complete in all respects to the satisfaction of engineer in charge. (200mm )

Handle (godrej make)

FLOOR spring for sixty kg weight (godrej make)

Cocks pur handle for top hung

Two Bar friction stainless steel

P/F of film frost of approved brand and manufacture incl all charges complete job

Supplying and installing 1.2mm thick self adhesive HDPE membrane having puncture resistance of 1000N (+/- 5 to 10%as per ASTME 154,tensile strength of 25 MPA as per ASTMD412 Allocation of greater than 500% as per ASTMD 412,Resistance to hydrostatic head greater than 60M as per ASTMD 5385,peel adhesive to concrete 880W/M as per ASTMD 1270,45 days UV exposure test-pass the system should fully bonded the RCC and consists of highly resilient HDPE film ,a pressure sensitive-adhesive layer which covered by a weather proof protective layer the membrane shall have min. of 100mm side and end laps which shall be sealed with double sided adhesive tape. Size of membrane should be 3mtx20m not less than this to minimize the joints the water proof stem should be applied directly y the manufacturer With 10 years of insurance backed system warranty against leakage all complete as per manufacturer specifications.

Supply and filling of 2nd class sand into sunken area including hand ramming with all carriages of material involved from nearest source complete job

Writing brass letters and numerals for roll of honour for hon'ble judges and other officials as desired by engineer in charge on wooden boards 25mm-40mm

Chemical washing of sofa sets/ carpets/curtains/blankets/table covers etc using shampoo, detergent and allied chemicals and drying ironing vaccum cleaning if necessery complete Sofa Sets

Carpets

Curtains/Blankets/Covering cloth

Supply of Door mats of required size and make as per the directions of engineer in charge

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. incl. cost of double glass panes (D.G.U glass), wire mesh and silicon sealant all inclusive complete job) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). P/F toughened Glass door fittings

L-Connection

Wheel set

Steel rod incl. steel cannel

Fixed Rod

Door Seal

Providing and fixing of PVC Name Plates, Signages etc at various sizes as per the directions of engineer incharge

Refiling of ABC dry chemical powder stored pressure type fire extinguisher 6kg capacity including displacing and installation of the same complete

Refiling of CO2 (Carbon Dioxide) type fire extinguisher of 4.5 Kg capacity including displacing and installation of same complete

Refiling of CO2 (Carbon Dioxide) stored pressure type fire extinguisher of 9 kgs capacity including displacing and installation of same complete

Refilling of ABC modular type fire extinguisher by dry chemical powder of 5kg capacity including displacing and installation of same complete

P/F of stainless steel telescopic slide drawer channel 12inch

P/F Toilet Paper Roll holder stainless steel with lid

Providing /installation of 1.5 ton Hot and cold (Air Conditioner) of approved quality (Blue star /Hitachi/ Samsung /Daiken/LG or equivalent with compresser) including providing 5KVA servo stablizer of approved quality with 4 square mm supply line with 32 Amp MCB complete job incld all necassary fixtures as per the directions of Engg. Incharge at site. With all cariages upto site of work all inclusive with cost of material & fitting charges.

Providing and commisioning lighting points incld wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5 Sqmm PVC insulated multi-strand copper wire for lighting sub mains,6 amp 1 way switch,2 mm thick PVC conduit/Channel with bends,junction boxes etc ,6 amp S Pole MCB ,10 amp DP MCB,2 way DB for housing MCB and hylem sheet of ISI mark and approved make with wooden box recessed in wallls with acessories incld all carriages

Providing and commissioning heating point incld wiring for heating points in 2 .5 sq.mm PVC insulated multi-strand copper wire and 4 sq.mm PVC insulated multi-strand copper wire for heating sub-mains, 16 AMP switch socket combine,,2 mm thick PVC conduit/Channel with bends, Junction boxes etc , 10 Amp S pole MCB ,2 way DB for housing MCB and hylem sheet of ISI mark and approved make with wooden box recessed in /over wallls with acessories complete incld all carriages

Providing & fixing of laminated wooden flooring 10 mm thick AC / 4-5 Non scratching type of aapproved quality laid over 06 mm thick thermocoal with 50mm wide skirting / door profile of approved quality Green Panel/ Action Tesa incl. cost & carriage of materials involved complete job

Providing/ Fixing of Zebra cut upfolded panelled blind curtains of superior quality , Design and shade with all accessories/ necessary fittings. Sample to be got approved from competent authority before fixing. Including all carriges involved upto site of work complete.Work to be executed as per the directions of Engineer incharge at site of work

Supply of leather covered 5 seater Sofa set of approved colour, design, size and make with central and side tables including all carriages upto site of work ( sample to be got approved from competent authority) complete job

Providing & Supplying of Gas Room Heater of approved quality with electric pulse ignition lighter gas heater with kit - LPG Gas Room Heater incl all carriages with all leads and lifts as per directions of site incharge complete job

Providing and fixing of Warmex 1000/2000 Watts Electric PTC Wall Mount Heater Superb WM incl all carriages with all leads and lifts as per directions of site incharge complete job

Engagement of skilled and un-skilled labours Mazdoor

Carpenter 1st class

Carpenter 2nd class

Mason 1st class

Mason 2nd class

plumber

Black Smith