Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.7 L+₹1.6 L (6.49%)Rejected-Finance R O VILL RAMNAGAR P O PANCHRUKHI TEHSIL PALAMPUR DISTT KANGRA HP | L2 | Rejected-Finance Bid rank L2 |
Tender Value
₹18.0 L
EMD Value
₹36,000
Closing Date
20 Dec 2021, 11:00 amClosed
Executive Engineer
Palampur Division HPPWD Palampur
C/o Indoor Wards Block in Civil Hospital Palampur Distt. Kangra (HP) (SW- Balance Work P/F railing in stair and courtyard ACP sheet ceiling in expansion joints in all building and ceiling main porch etc. and WS and sanitary fitting etc.)
2021_PWD_54627_1
Palampur Division, HPPWD Palampur
Open Tender
Civil Works
Item Rate
90 days
Palampur in Distt. Kangra
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
₹36,000
20 Apr 2022
14 Dec 2021
20 Dec 2021
14 Dec 2021
20 Dec 2021
14 Dec 2021
Amount
Steel work welded in built up sections trusses and frame work including cutting hoisting and fixing in position and applying a primer coat of red lead paint in gratings framed guard bares ladders railings brackets and similar work etc. including carriage of materials within all leads lifts and other incidentals.
Providing and fixing moulded hand rail of M.S hollow pipe 50mm (Fifty Milimetre) dia welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be measured & paid separately) including carriage within all leads, lifts of materials and other incidentals
Providing and fixing 18mm (Eighteen milimetre) thick HD X MIR Board of lining with butt jointings & nails (frame work and cover fillets to be measured and paid for separately with. as per the direction of Engineer in Charges including carriage of material within all leads, lifts and other incidents.
Providing and fixing 1st class Indian Teak wood 12 mm (Twelve milimetre) thick Providing and fixing plain lining with tongued and groved jointing and screws (frame work and cover fillets to be measured and paid for separately with. as per the direction of Engineer in Charges including carriage of material within all leads, lifts and other incidents.
Providing under layer for plinth protection of 75 mm (Seventy five milimetre) thick unconsolidated) bed of dry brick stone broken aggregate 40mm (Forty Milimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads, lifts of material and other incidentals.
Providing plinth protection 50mm (Fifty milimetre) thick with cement concrete 1:3:6 (One cement :Three sand: Six graded stone aggregate 20mm (Twenty milimetre)nominal size including finishing the top surface of concrete smooth within all leadsand lifts of material and other incidentals
Designing fabricating testing installing & fixing in position curtain wall with Aluminium composite panel cladding with open grooves for linear as well as curvilinear portions of the building for all heights & all levels etc. Providing fabricating & supplying & fixing panels of aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved coloured stainless steel screws, nut bolts, washers, cleats, weather silicone sealant bracker rodsetc.c) A.C.P. Sheet ceiling including carriage of materials within all leads, lifts and other incidentals.
Painting two coats (excluding priming coats) on new steel and other metal surfaces with enamel paint brushing to give and even shade including cleaning the surfaces of all dirt dust and other foreign matter enamel paint other than white including carriage of materials within all leads and lifts and other incidentals.
Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil not more than 3 mtrs (Three meters) clear from the edge of excavation and then returning the stacked soil in15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-Incharge, within all leads, lifts of materials and other incidentals.
Providing form work with steel plates 3.15mm.(Three deciman fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering struting and proping etc. with wooden battens and ballies including dewatering/ pumping or bailing out water wherever required at site complete upto any heights/ depth of propping and centering below supporting floor to ceiling and removal of the same for insitu- reinforced concrete and plain concrete work in vertical surfaces such as walls of any thickness,partition and the like including attached pillasters buttresses,plinth and string courses and the like including carriage of material within all leads, lifts and other incidents.
Providing form work with steel plates 3.15mm. (Three decimal fifteen milimetre) thick welded with angle iron frame 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ).,so as to give a fair finish including centering shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling as per site requirement and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs lanindgs and the like including carriage of materials within all leads and lifts of materials and other incidentals .
Providing and laying cement concrete 1:4:8 ( One Cement : four Sand: eight graded Stone aggregate 25mm (Twenty five milimetre nominal size) and curing complete in foundation and plinth excluding the cost of form work. /under flooring including carriage of materials within all leads, lifts and other incidentals
Providing and laying cement concrete grade M-20 design mix with minimum cement contents 330 Kg. (Three hundred thirty kilogramme per Cubicmetre) 20mm (Twenty milimetre) Crushed stone aggregate mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforcement for R.C.C. work in Columns, footing upto floor two level including carriage of materials within all leads and lifts and other incidentals.
Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundations for all types of structure complete of plain cement concrete grade M-10 (M Ten) nominal mix 1:3:6 (one cement :Three sand :Six graded crushed /broken stone aggregate 20 mm (Twenty Milimeters) nominal size in or under water including curing complete, pumping or bailing out water ,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work in drain as per drawings and technical specifications Clause 802, 803, 1202 & 1203 and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals .
Providing and laying cement concrete 1:2:4(One cement: Two sand:four graded crushed stone aggregate 20 mm (Twenty milimetre) nominal size mechanically mixed and vibrated and curing complete so as to obtain minimum crushing strength of M-20 grade and curring complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs landings and shelves and their supports, balconies, beam girders bressumers and cantilevers upto all floor levels/ heights Coffer etc. including carriage of materials within all leads and lifts of materials and other incidentals .
Providing concrete for plain/ reinforced Cement concrete 1:2:4 (One Cement : Two Sand : four crushed stone aggregate) Nominal Mix,P.C.C. grade M-20 (M-Twenty) in open foundations complete as per drawing and technical specifications clause 802, 803,1202 & 1203 including carriage of materials with in all leads, lifts and other incidental .
Providing thermo mechanical treated/ Tor steel reinforcement for Reinforced cement concrete work including bending, binding and placing in position and including cost of binding wire complete for all floors including all leads and lifts and carriage of materials and other incidents.
Demolition below G.L. upto 1.50 metres depth and disposal of unserviceable materials within 20 metres lead un- reinforced cement concrete including carriage of materials within all leads and lifts and other incidentals.
Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. Works including carriage of materials within all leads, lifts and other incidentals
Demolition of Brick work above Ground level upto floor two level and more including stacking of service material and disposal of unservice material with in 20mtr. Lead in cement mortar including carriage of materials within all leads, lifts and other incidentals.
Providing and fixing C.P. brass bib tap (Superior or heavy tape) long body Code No. F2006152QT . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and fixing C.P. brass bib cocks Short Body Code No. F2006151. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and Fixing 15mm dia C.P. brass Pillar Tap with Capstan head Code No. F2006101 QT within all leads, lifts of materials and other incidentals.
Providing and fixing 15mm dia C.P. brass angle valve (Cock) without nuts and pipe Code No. F2006201 QT. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and fixing C.P. Brass 2 way angle cock without nuts & pipe Code No. F2006211QT. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and fixing 600mmx 450mm (Five hundred fifty milimetre into four hundred fifty milimetre) bevelled edge Mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P Brass screws and washers . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and fixing C.P. Brass Towel rail of Jel/ EES- ESS complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 750mm x 20mm (Seven hundred fifty into Twenty milimetre) . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetre) glass shelf with C.P. brass brackets and guard rail complete, fixed to wooden plugs with C.P. Brass screws. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. Brass screws . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and fixing PVC connection pipe with brass unions 45cm (Forty five centimetre) length 15mm ( fifteen milimetre) dia.The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Providing and fixing 32mm (Thirty two milimetre) dia nominal size C./P. Brass waste for wash basin or sink including carriage of materials within all leads and lifts of materials and other incidentals .
Providing and fixing C.P. jet spray of approved quality of Jel/ ESS- ESS and colour with 1.5 mtr. (one decimal five metre) tube. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
Sunil Walia
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .