supply and installation of fans at Peringammala Indoor Stadium

Amount

Point wiring in PVC conduit, with modular type switch.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C

Twin control point wiring in PVC conduit, with modular type switch:

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/ sub main:

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2x1.5 sq.mm + 1x1.5sqmm earth wire

2x2.5 sq.mm + 1x2.5sqmm earth wire

2x4 sq.mm + 1x4sqmm earth wire

2x6 sq.mm + 1x6sqmm earth wire

4x6 sq.mm + 2x6sqmm earth wire

4x10 sq.mm + 2x6sqmm earth wire

Wiring for circuit/ sub main:

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Telephone wiring in existing conduit:

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required

TV cable in existing conduit:

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

PVC conduit:

Rates of only ISI marked conduits, cables, switches and socket outlets were taken in the following items. Unless and otherwise specified, only such conduits, cables, switches and socket outlets shall be used in the work.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Modular type switch /socket:

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

6/10 amps switch

2 way 5/6 amps switch

Telephone socket outlet

TV antenna socket outlet

Bell push

Modular type electronic fan regulator:

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

Modular type blanking plate:

Supplying and fixing modular blanking plate on the existing modular plate as required.

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mm x 75mm)

3 Module (100mm x 75mm)

4 Module (125 mmX75 mm)

S/F 6A & 16A socket with switch

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc as required.

Supplying and fixing brass batten/ angle holder includingconnections etc. as required.

CEILING ROSE

Supplying and fixing 3 pin, 6 / 5amps, ceiling rose on the existing junction box\ wooden block including connection etc as required.

Erection of Wall/ceiling light/ LED fittings:

Erection of wall bracket/ ceiling fittings/ LED fittings of all sizes and shapes containing LED lamps per fitting, complete with all accessories including connection etc. as required.

ITC flourescent/ LED fitting directly on surface:

Installation, testing and commissioning of pre wired, fluorecent fitting/ compact fluorescent fitting/ LED fitting of all types, complete with all accessories and tube etc directly on ceiling/wall, including connection with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable and earthing etc as required.

ITC ceiling fan:

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30cm)with 1.5 sq.mm FRLS PVC Insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

ITC ceiling fan:

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as required.

upto 450mm sweep

S/F TP MCB DB:

Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bubar, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required(But without MCB/RCCB/Isolator)

4 way (4 +12), Double door *

6 way (4 +18), Double door *

S/F SP MCB DB:

Supplying and fixing following ways, horizontal type single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bubar, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required(But without MCB/RCCB/Isolator)

8 way, Double door *

12 way, Double door *

VTPN MCB DB:

Supplying and fixing following ways,surface/recess mounting vertical type 415volts, TPN MCB distribution board of sheet steel,dust protected,duly powder painted,inclusive of 200amps tinned copper busbar,common neutral link,earth bar,din bar for mounting MCB's/but without MCB's and incomer as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4 way (4 + 12), Double door

8 way (4 + 24), Double door

MINIATURE CIRCUIT BREAKERS ('C' SERIES)/ ISOLATORS

'C' series, MCB:

Supplying and fixing 5 amps to 32 amps rating, 240/415 Volts, 'C' curve, miniature circuit breaker suitable for inductive and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

MCB ISOLATORS

Supplying and fixing following rating, double pole, 240 volts, isolators in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolators in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

25A 30mA DP RCCB

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

25A 30mA FP RCCB

40A 30mA FP RCCB

DANGER NOTICE PLATE

Providing and fixing MV danger notice plate of 200mmx150mm, made of mild steel, atleast 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

CABLE TRAYS

Supplying and installing following size of pre-painted M.S /PVC Cable trays with perforation not more than 17.5%, in covenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts and nuts, painting suspenders etc as required.

375/400mm width x 50mm depth x 2.0mm thickness

225 mm width X 50 mm depth X 1.6 mm thickness

150mm width x 50mm depth x 1.6mm thickness

100mm width x 50mm depth x 1.6mm thickness

Supplying and installing following size of pre-painted M.S Cable trays bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts and nuts, painting suspenders etc as required.

375/400mm width x 50mm depth x 2.0mm thickness

225 mm width X 50 mm depth X 1.6 mm thickness

150mm width x 50mm depth x 1.6mm thickness

100mm width x 50mm depth x 1.6mm thickness

LT CABLE LAYING

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

Above 35sq.mm and upto 95.sqmm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/ METAL pipe as required.

Upto 35 sq. mm

Labour

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Labour

Above 35 sq. mm and upto 95 sq. mm (clamped with 25/40x3mm MS flat clamp)

Labour

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Upto 35sq.mm (clamped with 1mm thick saddle)

Labour

Above 35sq.mm and upto 95sq.mm (clamped with 25x3mm MS flat clamp)

Labour

END TERMINATION

Supply and making end termination with brass compression gland, earth clip and aluminum lugs/ Cu lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminum conductor cable of 1.1kV Grade as reqiured.

3.5x50sq.mm Al Cable (35mm)

3.5x35sq.mm Al Cable (32mm)

4x16sq.mm Al Cable (28mm)

4x10sq.mm Al Cable (25mm)

METERING PANEL(INDOOR TYPE) FOR SHOPS

Consumer portion consisting 1 no 25A DP MCB - 1 no

Thermoplastic polycarbonate IP65 Metering cubicle(Hensel make Mi 2200 or equivalent)

Supply

Labour

SURGE ARRESTERS

supply of fixing Surge Protection Device Class B&C/ Type 1&2 Tested as per IEC 61643 Part 11:2016 . Total Impulse current-50 KA (10/350µ sec) & Total Max Discharge current 260KA (8/20µ sec), Voltage protection level <1.5 kV .The Surge Protection Devices should have TOV withstand for 120 Min : 442 V and with out Follow Current & Leakage Current. Protective Elements are High Energy MOV & GDT & the Protection Modes for : L & N to PE . Short- Circuit Current rating (Isccr) – 25kA/50 kA . Back up fuse required more than 315AgG/gL. Health Status Indication required in all cartridge. Total Response time <100 nano sec . (for panel)

Supply

Labour

supply of fixing Surge Protection Device Class B+C/ Type 1+2 Tested as per IEC 61643 Part 11:2016 . Total Impulse current-50 KA (10/350µ sec) & Total Max Discharge current 200KA (8/20µ sec), Voltage protection level <1.5 kV . The Surge Protection Devices should have TOV safefail for 120 Min : 442 V and with out Follow Current & Leakage Current. Protective Elements are High Energy MOV & GDT & the Protection Modes for : L & N to PE . Short- Circuit Current rating (Isccr) – 25 kA/50 kA . Back up fuse required more than 315AgG/gL. Health Status Indication required in all cartridge. Total Response time <25 nano sec . (for ups)

Supply

Labour

supply of fixing Surge Protection Device Class C/ Type 2 Tested as per IEC 61643 Part 11:2016 . Total Max Discharge current 200 KA (8/20µ sec), Voltage protection level <1.5 kV . The Surge Protection Devices should have TOV safefail for 120 Min : 442 V . Protective Elements are MOV & GDT & the Protection Modes for : L & N to PE . Short- Circuit Current rating (Isccr) – 25kA/50 kA Back up fuse required more than 200AgG/gL. Health Status Indication required in all cartridge. Total Response time <25 nano sec . (for DB's)

Supply

Labour

Provision for hire charges for scaffoldings pipes, wooden planks, etc. Transporting, loading & unloading, labour charges for setting, fixing in position(material will be taken back after use) (Actual payment to be as per Departmental rates.)

ALLUMINA ELECTRONICS

BINDU VEERAN