Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹15.0 L+₹83,135 (5.88%)Rejected-Finance | L2 | Rejected-Finance Rejected due to L2 | |
| 3 | L3₹15.9 L+₹1.7 L (12.3%)Rejected-Finance | L3 | Rejected-Finance Rejected due to L3 | |
| 4 | L4₹16.0 L+₹1.9 L (13.3%)Rejected-Finance | L4 | Rejected-Finance Rejected due to L4 |
| Sl No | Description | Qty | Unit | M/S PHI CONSTRUCTIONS L1 | Surendra Singh L4 | CHAHAR ENGINEERS AND COMPANY L2 | Shri Ram Traders Co L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking down Ceiling fan/Exhaust fan/Wall mounting fan/Padestal fan etc of any make, type & sweep for preventive maintenance for proper checking and serviceabilty, noise, rubber bush,oiling, tightning of nut bolts etc, refixing the same after replacing of unserviceable parts also applying two coats of spray painting with one coat of approved first quality synthetic enamel paint matching to the existing color including writing the MES No & testing the same complete all as specified and directed by Engr-In-Charge. Note: Any Unsv parts required for replacement shall be measured and paid separately under respective item of Schedule as supply only. | 1,950 | Each Job | 120 ₹2,34,000 | 30 ₹58,500 | 105 ₹2,04,750 | 10 ₹19,500 Lowest |
| 2.00 | M &L dismantling and removing old burnt copper wire winding of Ceiling fans upto 1400 mm sweep and rewinding with new enameled super copper wire of existing gauge including providing insulation by varnishing (golden), cleaning, oiling, greasing etc complete all as specified and directed by Engr-in-Charge. Note: The super enameled winding wire is to be provided shall be any one make of Devidayal/Usha/Chetak of appropriate gauge as directed by Engr-in-Charge. | 890 | Each Job | 300 ₹2,67,000 Lowest | 350 ₹3,11,500 | 370 ₹3,29,300 | 390 ₹3,47,100 |
| 3.00 | All as per Item No 02 as above but for steel exhaust fan not less than 300 mm sweep complete all as specified and directed by Engr-in-charge. | 110 | Each Job | 300 ₹33,000 Lowest | 500 ₹55,000 | 400 ₹44,000 | 520 ₹57,200 |
| 4.00 | All as per Item No 02 as above but for Wall mounting fan of size & sweep of any make complete all as specified and directed by Engr-in-charge. | 20 | Each Job | 300 ₹6,000 | 600 ₹12,000 | 290 ₹5,800 Lowest | 630 ₹12,600 |
| 5.00 | All as per Item No 02 as above but for Padestal fan of size & sweep of any makecomplete all as specified and directed by Engr-in-charge. | 10 | Each Job | 300 ₹3,000 | 650 ₹6,500 | 290 ₹2,900 Lowest | 610 ₹6,100 |
| 6.00 | Supply only Capacitor upto 3.5 Mfd capacity including capacitor clamp for ceiling fans/exhaust fan/Cabin fan/Table fan of following capacity/ISI marked | 850 | Each | 80 ₹68,000 | 35 ₹29,750 | 25 ₹21,250 Lowest | 35 ₹29,750 |
| 7.00 | Supply only Ball bearing suitable for existing ceiling fans upto 1400 mm sweep complete all as specified and directed by Engr-in-Charge :-Make:- SKF/NBC/TATA | 990 | Each | 60 ₹59,400 | 55 ₹54,450 | 30 ₹29,700 Lowest | 49 ₹48,510 |
| 8.00 | Supply only Ball bearing suitable for existing exhaust fans/wall mounting fan upto 400 mm sweep complete all as specified and directed by Engr-in-Charge :-Make:- SKF/NBC/TATA | 90 | Each | 60 ₹5,400 | 55 ₹4,950 | 45 ₹4,050 Lowest | 51 ₹4,590 |
| 9.00 | Supply only down road suitable for existing 1200 mm sweep ceiling fan including fan hook ('U' clamp nuts ,split bolts) made out of MS flat iron and made to shape, nut bolt,hanger clamp rubber, shackle top & canopy set etc complete all as specified and directed by Engineer-in-Charge. | 280 | Each | 150 ₹42,000 | 30 ₹8,400 Lowest | 55 ₹15,400 | 40 ₹11,200 |
| 10.00 | Supply only fan blade iron made suitable for existing 1200 mm sweep ceiling fan including necessary accessories etc complete all as specified and directed by Engineer-in-Charge. | 290 | Set of three | 200 ₹58,000 | 290 ₹84,100 | 90 ₹26,100 Lowest | 210 ₹60,900 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
21 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
OFFG AGE (C)
Military Engineer Services, Garrison Engineer (Army) No 2 Jodhpur, Multan Lines, Army Area Jodhpur -342010
REPAIR AND MAINTENANCE OF ALL TYPES OF FANS AND WINTER APPLIANCES OF MH AREA, CEJZ AND ADJOINING AREA UNDER GE(A) NO 2 JODHPUR AS PER CPP SER NO 33
2025_MES_733292_1
8800/25-26/52/04/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE (ARMY) NO 2 JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (ARMY) NO 2
₹40,000
Yes
22 Jan 2026
30 Sept 2025
23 Oct 2025
30 Sept 2025
21 Oct 2025
14 Oct 2025
30 Sept 2025 - 7 Oct 2025
Amount
Taking down Ceiling fan/Exhaust fan/Wall mounting fan/Padestal fan etc of any make, type & sweep for preventive maintenance for proper checking and serviceabilty, noise, rubber bush,oiling, tightning of nut bolts etc, refixing the same after replacing of unserviceable parts also applying two coats of spray painting with one coat of approved first quality synthetic enamel paint matching to the existing color including writing the MES No & testing the same complete all as specified and directed by Engr-In-Charge. Note: Any Unsv parts required for replacement shall be measured and paid separately under respective item of Schedule as supply only.
M &L dismantling and removing old burnt copper wire winding of Ceiling fans upto 1400 mm sweep and rewinding with new enameled super copper wire of existing gauge including providing insulation by varnishing (golden), cleaning, oiling, greasing etc complete all as specified and directed by Engr-in-Charge. Note: The super enameled winding wire is to be provided shall be any one make of Devidayal/Usha/Chetak of appropriate gauge as directed by Engr-in-Charge.
All as per Item No 02 as above but for steel exhaust fan not less than 300 mm sweep complete all as specified and directed by Engr-in-charge.
All as per Item No 02 as above but for Wall mounting fan of size & sweep of any make complete all as specified and directed by Engr-in-charge.
All as per Item No 02 as above but for Padestal fan of size & sweep of any makecomplete all as specified and directed by Engr-in-charge.
Supply only Capacitor upto 3.5 Mfd capacity including capacitor clamp for ceiling fans/exhaust fan/Cabin fan/Table fan of following capacity/ISI marked
Supply only Ball bearing suitable for existing ceiling fans upto 1400 mm sweep complete all as specified and directed by Engr-in-Charge :-Make:- SKF/NBC/TATA
Supply only Ball bearing suitable for existing exhaust fans/wall mounting fan upto 400 mm sweep complete all as specified and directed by Engr-in-Charge :-Make:- SKF/NBC/TATA
Supply only down road suitable for existing 1200 mm sweep ceiling fan including fan hook ('U' clamp nuts ,split bolts) made out of MS flat iron and made to shape, nut bolt,hanger clamp rubber, shackle top & canopy set etc complete all as specified and directed by Engineer-in-Charge.
Supply only fan blade iron made suitable for existing 1200 mm sweep ceiling fan including necessary accessories etc complete all as specified and directed by Engineer-in-Charge.
Supply only fan motor (copper winding ) assembly ,AC single phase,230 V, suitable for existing 1200 mm sweep ceiling fan including capacitor,ball bearing,motor stator,housing etc complete all as specified and directed by Engineer-in-Charge.
Supply only fan motor (copper winding ) with electronic chip/pcb assembly suitable for exisitng 1200 mm sweep BLDC fan ,AC single phase,230 V, including all accessories motor stator,housing etc complete all as specified and directed by Engineer-in-Charge.
Supply only exhaust fan blades,frame and louvers all iron made suitable for existing upto 300 mm sweep exhaust fan including necessary accessories etc complete all as specified and directed by Engineer-in-Charge.
Supply only exhaust fan motor (copper winding) assembly,AC single phase ,230 V, suitable for existing upto 300 mm sweep exhaust fan including capacitor,ball bearing,motor stator,housing all accessories etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement wall mounting fan swing motor complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement regulator for wall mounting fan complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement PVC exhaust fan motor upto 250 mm sweep complete all as specified and directed by Engineer-in-Charge. Make:- Bajaj/Havells/Crompton
Taking down and refixing Storage type water heater (Geyser ) from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/35 ltrs upto 3 KW of any type and make, Checking the serviceability of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of Unsv parts and assembly complete (considered as one unit) and installing & testing the same as per the direction of Engineer-in-Charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.
Supply only heating element including rubber ring, washer, holding clamps and nuts of geyser upto 3.0 KW capacity of suitable size complete all as specified & directed by Engineer-in-Charge. Make : Bajaj/Recold/Venus
Supply only thermostat suitable for upto 3.0 KW geyser complete all as specified & directed by Engineer-in-Charge. Make : Bajaj/Recold/Venus or existing make .
S&F in replacement electric water storage geyser 2 KW & 25 ltr capacity assembly/body other than heating element & thermostat including all electrical components parts complete all as specified & directed by Engineer-in-Charge.Make : Bajaj/Recold/Crompton.
Supply only PVC connection (heavy duty) of 15 mm dia with required length with 2 Nos of brass, chromium plated nuts of approved make & quality complete all as specified & directed by Engineer-in-Charge.
M&L for repair & maint and making serviceable to UPS of 2 KVA for backup of Shadowless LED OT light fitting complete all as specified and directed by Engineer-in-Charge . Make : Suitable existing make
M&L for repair & maint and making serviceable to UPS of 10 KVA for backup of Shadowless LED OT light fitting complete all as specified and directed by Engineer-in-Charge. Make : Suitable existing make or equivalent.
S&F PCB of UPS 2 KVA for backup of Shadowless Halogen Lamp, complete all as specified and directed, Make : Suitable existing make
S&F PCB of UPS 10 KVA for backup of Shadowless Halogen Lamp, complete all as specified and directed, Make : Suitable existing make
Supply only Sealed Maintenance free batteries 12 V,25- 30 AH capacity for 10 KVA UPS . Make : Amaron / Exide / Okaya or existing equivalent make.
Supply only Sealed Maintenance free batteries 12 V, upto 10 AH for 2 KVA UPS. Make : Amaron / Exide / Okaya or exisitng equivalent make.
Taking down and disconnecting the electric connection of UPS capacity upto 10 KVA from main supply and repairing the UPS, Checking the serviceability of all parts such as driver card, charging card, transformer & all electronic boards etc including batteries and refixing the same after replacing of unserviceable parts and assemblying complete (considered as one unit) and installing and testing the same as per the direction of Engineer-in-Charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.
Supply only IGBT for UPS.
Supply only Driver card.
Supply only SMPS card.
Supply only Charger card.
Supply only Control card.
Supply only Fuse of suitable Amps.
All as per Sr item No 27 but UPS 2 KVA
Supply only IGBT for UPS.
Supply only driver card.
Supply only SMPS card.
Supply only Charger card.
Supply only Control card.
Supply only fuse of suitable Amps.
S&F Flexible PVC unsheathed twin core copper conductor cable of size 23/0.077 in nominal area and split pin all as required and directed.
Taking down Unsv shadowfree LED light for repairs and refixing same after fixing it and make it serviceable as per user requirement complete all as specified and directed by Engineer-in-Charge. Note : Replacement items shall be measured and paid separately.
Supply only transformers suitable for existing shadowless light complete all as specified and directed by Engineer-in-Charge.
Supply only light driver of capacity 12 Volts, 6-15 Amp rating for shadowfree light, complete all as specified and directed by engr-in-charge.
Supply only SMPS box suitable for existing shadowfree light complete all as specified and directed by Engineer-in-Charge.
Supply only Gun metal bushes of suitable size for any type and any sweep of ceiling fans complete all as specified and directed by Engr-in-Charge.
Supply only MS clamps (Standard size) with rubber real with MS nut, bolts, check nut & split pin complete all as specified and directed by Engineer-in-Charge.
Supply only Canopy(set of two) for exisitng ceiling fans complete all as directed . Make:- Usha/Khaitan/Crompton
S&F fan hook ('U' clamp nuts/fasteners,split bolts) made out of MS flat iron and made to shape as required complete all as specified and directed.
S&F downrod of 4-5 feet long including hole as suitable and made to shape as required complete all as specified and directed.
CHAHAR ENGINEERS AND COMPANY (BID ID -3461082)
Shri Ram Traders Co (BID ID -3461327)
Surendra Singh (BID ID -3460066)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
tender52.pdf
Tender Documents • 0.65 MB
BOQ_821061.xls
BOQ • 1.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .