REPAIRS TO FLOORING, WALL, SURFACE FINISHES AND ALLIED B/R WORKS IN CADET MESS, SQNS AND TRG AREA ETC UNDER AGE B/R I (MAINT) AT INA EZHIMALA

Amount

Dismantling single layer of Mangalore pattern tiles in roofing complete as specified and directed.

M&L, roof tiles Mangalore pattern interlocking at side joints, laid dry complete as specified and directed.

All as per item No 02 herein above but except tiles complete as specified and directed. Note:- Old serviceable tiles obtained from dismantling will be used after cleaning.

M&L for ridge or hip tiles to suit Mangalore pattern or roofing tiles bedded and jointed in cement mortar 1:6 complete as specified and directed.

M&L for preparation of new MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint over a coat of primer complete as specified and directed..

M&L for Preparation of old treated MP roof tile surfaces by cleaning the tiles by wire brushes to remove all existing fungal growth etc and applying one coat of antifungal paint complete as specified and directed.

M&L preparation of old treated wall surfaces and applying one coat of synthetic enamel paint complete as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc complete as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed 20mm thick in CM 1:6 complete as specified and directed.

M&L for chequered cement concrete tiles 20 cm x 20 cm x 25mm or 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20mm thick screed bed in cm 1:6 complete as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, floors, pillars, window cills, cooking platforms and the like set in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 20mm thick screed bed in CM (1:6) complete as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete as specified and directed.

M&L for vitrified colourd ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and poointed in white or coloured cement to match the shade including 20mm thick screed bed in CM (1:6) complete as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and poointed in white or coloured cment to match of light shade including 15mm thick backing coat plaster in CM (1:4) complete as specified and directed..

M&L for marble of approved colour and shade match with existing, 15-18 mm thick, machine cut (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed bedded and jointed with white cement slurry and pointed with grout of matching shade including all necessary cutting & waste and machine polishing (Mirror finish), in floors, complete as specified and directed.

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement mixed with liquid water proofing compound complete as specified and directed. Note - Supply only Liquid water proofing compound measured & paid separatly.

Supply only Liquid Water proofing compound of approved quality.

M & L preparation of old treated surfaces and appling one coat of acrylic emulsion paint (interior grade) on walls including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling all as specified and as per manufacturers instructions and as directed.

M&L for preparation of new platered surfaces and appling two coats of acrylic emulsion paint (interior grade) on walls over a coat of primer including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion (exterior grade) on wall up to a height of up to 9 mtr including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

M & L preparation of new platered surfaces and appling two coats of acrylic emulsion (exterior grade) on wall over a coat of primer including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

M&L for preparation of old treated surfaces and applying one coat sandtex matt finish on wall up to a height up to 9 mtr including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling all as specified & as per manufacturers instructions

M&L for preparation of old decorated surfaces and applying one coat of oil bound distemper on ceiling all as specified and as per manufacturers instructions.

M&L for preparation of old painted steel surfaces of any description including rafters ,purlins etc..(up to a height of 9 mtr) over 10 cm width or girth and applying one coat of epoxy paint including necessary scaffoldings complete as specified and directed.

M&L for preparation of old painted steel surfaces of any description including rafter ,purlins etc..(up to a height of 9 mtr) over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces including necessary scaffoldings all as specified and as directed.

M&L for preperation of old painted surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron/stone surfaces including rafter, purlins ( upto 9 mtr height) and sign board post etc complete as specified and directed. by Engr-in-Charge

Rounding Edges of stone slabs to one edge, such as in steps and other similar situations complete as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement base paints on wall surfaces, kerb stones etc complete as specified and directed.

M&L for complete removal of existing treatment and applying one coat of cement base paints on wall surfaces, kerb stones etc complete as specified and directed.

M&L for preperation of old treated surfaces and applying one coat of synthetic enamel paint on chain link fencing of any size using approved colour match with exisiting colour complete as specified and directed. Note:- Mode of Measurement:- Measured flat overall 1 x Length x Breadth of fencing for painting all over)

Gates Infra Construction Co

Palace constructions