REPAIR TO FLOORING CEILING ROOFING AND OTHER ALLIED WORKS AT CENTRAL AMENITY BLDG GE OFFICE AGE OFFICE AND BSO YARD AREA UNDER AGE BR EAST AT GE DEHU ROAD

Amount

Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises. complete all as specified and as directed.

M&L for joint free non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Ditto above item No 2 but on skirting over and with 10 mm th rendering in CM 1:4 complete. All as specified and as directed.

M & L Glazed ceramic coloured tiles 300 mm x 450 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

M & L Glazed ceramic coloured tiles 300 mm x200 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick Backing Coat in CM (1:4)complete all as specified and as directed.

M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Ditto above item No 6 but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M & L for brick work with sub class "B" brick st or curved on plan exceeding 6 mtr mean radious and built in CM 1:6 .complete all as specified and as directed.

M&L for rendering 15 mm thick on newly fair faces of brick work or concrete surfaces finished even and smooth in cement mortar (1:6) complete all as specified and as directed.

M&L for rendering 10 mm thick on newly fair faces of brick work or concrete surfaces finished even and smooth in cement mortar (1:4) complete all as specified and as directed.

Demolition of cement concrete in ground floor & paving n.exc 15 cm thick etc.,complete all as specified.complete all as specified and as directed.

M&L for 40 mm thick plain cement concrete (1:2:4) type B-1 using (20 mm graded stone aggregate) as in floor,finished rough to receive tiles etc,complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C1 using 20mm graded aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour 75 mm thick plain cement concrete (1:4:8) type C-2 (using 40 mm graded stone aggregate) as in the sub base of floor complete all as specified.

M&L for 55mm to 60mm thick laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of M-35 Grade over and including 50mm thick sand layer watering and ramming complete all as specified and as directed.

M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified.

M&L for rendering 15 mm thick on old fair faces of brick work or concrete surfaces finished even and smooth in cement mortar (1:6) complete all as specified and as directed.

M&L for rendering 15 mm thick on old fair faces of brick work or concrete surfaces finished even and smooth in cement mortar (1:4) complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primercomplete all as specified and as directed.

Material and labour for Preparation of newly plastered surface walls and applying two coats of weather proof paint on external surfaces including a coat of acrylic based primer complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkat or frame n.exc 1.5 sq.m including removing to store,complete all as specified and as directed.

Taking down Chowkat or frame exc 1.5 sq.m & n.exc 4 sq.m including removing to store,complete all as specified and as directed.

Taking down Shutters of any description exc 1 Sqm and n exc 2 sq. m each and removing to store complete all as specified and as directed.

Taking down Shutters of any description exc 2 sq. m each and removing to store ,complete all as specified and as directed.

S&F plain solid straight chowkat and frames wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joint in Second class hard wood, complete all as specified and as directed.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.complete all as specified and as directed.

S&F Glazed and skeleton shutter 35 mm thick 1st class soft wood, divided into square, with plain chamfered or round mitred and rebated sash bar, any numbers prepared to receive glass, gauge etc edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat ,complete all as specified and as directed.

S&F 30 mm thick plain framed paneled shutter with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood,complete all as specified and as directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.complete all as specified and as directed.

S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

S & F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed, complete all as specified and as directed.

S & F Extruded Aluminium alloy handles, fabricated type, anodised 125 mm size, complete complete all as specified and as directed.

S & F 125 mm mild steel tower bolt, ISI marks, stone enameled black with bright bolt and fixed, complete all as specified and as directed.

S & F 250 mm aluminum anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and as directed.

S & F in repairs 15 mm bib taps fancy type long shank cast copper alloy chromium plated with crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified

S & F in repairs 15 mm dia angle valves cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed, complete all as specified and as directed.

Supply and fixing in repairs Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe complete all as specified and directed by Engineer-in -Charge

Supply and fixing for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700mm white with and including fittings such as s' trap distance pieces 100 mm long etc complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete including seat and cover, flush pipe all joints etc complete all as specified and as directed.

Supply & fixed in repair Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc. complete all as specified and as directed.

S & F in repairs 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed.

S & F in repairs Vitreous China wash basin white flat back size 580x450 mm including brackets, waste pipe , cutting for pinning end of brackets or erecting stand etc.complete all as specified and as directed.

S & F in repairs 15 mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screed down high pressure, with or without lettered 'Hot; or 'cold' with long screwed shanks and fly nut, screwed for iron pipe and fixed, complete all as specified and as directed.

Supply & fixed in repair Towel Rail 600 mm long of CP brass fixed with and including Chromium plated brass screws and wooden,steel/plastic cleats (minimum weight 190 gms) complete all as specified and as directed.

Supply and fixed PVC connection 15 mm dia and 45 cm long with 2 Nos brass nuts, fixed in repairscomplete all as specified and as directed.

Dismantling water tanks and removing to Store up to 500Ltr capacity. complete all as specified and as directed.

Dismantling water tanks and removing to Store exc 500Ltr but n. exc 1000Ltr capacity. complete all as specified and as directed.

Supply & fixed 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) ISI marked, double layered, marked embosed, hoisted and fixed in position including connecting up pipes complete all as specified and as directed.

Supply & fixed 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of ISI marked, double layered, marked embosed, hoisted and fixed in position including connecting up pipes complete all as specified and as directed.

M&L for 15 mm ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule and fixed, complete all as specified and as directed.

Supply and fixed Grating round 140 mm size with waste hole of stainless steel fixed in repairs complete all as specified and as directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and as directed.

S&F 15mm bore Galvanised mild Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Fixing only 15mm bore Steel water tubing with provn of all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. NOTE: Old serviceable steel tubing retrieved from taking down under item no 53 shall be used. complete all as specified and as directed.

S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F of sheet glass 3 mm thick ordinary glass with oil putty in square n.exc 0.5 sq.m in each pane.complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern in roof covering complete. complete all as specified and as directed.

Dismanteling MS works of any desc. not otherwise provided for complete all as specified and as directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

All as per item No. 65 above but fix in valley gutter / ridge,plain/corrugated complete

S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W ( gde E-250)Quality A complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, Rounding to edges complete all as specified and as directed.

M&L 20-25 mm thick machine cut kota stone slab flooring over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete etc all as specified and as directed.

Supply & fixed in repair Wall mixer with telephonic type chromium plated, fancy type, 15 mm bore fixed in repairs complete all as specified and as directed.

M&L, applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer. complete all as specified and as directed.

M&L for preparation old wooden surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid. complete all as specified and as directed.

S & F Anodised Alu. Snap grid 605x605 mm frame work for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. wire ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specified and as directed.

M & L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh Complete all as specified and as directed.

M & L for Comlete removal of existing treatment and preparation the surface of wall and applying two coat of luster paints as on wall surfaces over a coat of alkali resistant priming paint & including 3mm thick wall care putty @ 1.20 kg/Sqm complete all as specified and as directed.

M & L for complete removal of existing treatrment and applying two coats of Plastic emulsion paint as on walls over a coat of priming paint and including 3 mm wall care putty over complete wall surfaces, complete all as specified.and as directed.

M & L for taking out old water proofing treatment from roof including cement screed bed and applying water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge :- (a) Rendering 10mm thick in cement mortar (1:4) using water proofing compound @ 3% of weight of cement on RCC roof slab, finished even & smooth without using extra cement (b) The roof surface shall be thoroughly wire brushed cleaned to eliminate all sharp projection, washed, dried up and cleaned of all foreign material and dust to receive primer. (c) On the dried plastered surface, one coat of approved bituminious primer @ 0.25 Kg/Sqm shall be applied. (d) On this primered surface, 3mm thick APP modified bituminous membrane with non woven polyster mat reinforcement weighing not less than 3 Kg/Sqm with plain finish shall be laid by torch application method (e) The overlap while torching shall be 100mm on transverse direction and 75mm on longitudinal direction. (f) Top surface shall be applied with bituminious aluminium paint (g) The treatment shall be carried as per manufacturer’s instructions all as directed by Engineer-in-charge. (for Six Esh shed only) complete all as specified and as directed.

RAMESH PATIL

H S TAKHI

Star Construction