DAY TO DAY MAINTENANCE WORKS AT INS VISWAKARMA NAMAC WED CANTEEN STORES BSO YARD AND BVY UNDER AGE BR III OF GEND VISAKHAPATNAM

Amount

The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to vist the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.

Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S&F for 0.50 mm thick pre-painted corrugated/’Z’ profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with Silicon modified polyester coating of 20 micron and alkalyed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self drilling and self tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of “HILTI” or equivalent make approved by GE, Complete all as specified and as directed.

S & F fiber glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with self tapping self driven screws and washer 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. crews shall be of “HILTI” or equivalent make approved by GE, Complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe-410-W(Gde-E-250)quality-B, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc, as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L prepration of new steel Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick factory made second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or commercial face of veneered particle board medium density, wood particle board with veneers supplied and fitted to chowkats complete all as specified and directed

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, Aluminium (die cast body type) designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Preparing surfaces of wood and wood based materials, steel and iron work new or old, of any description and girth not otherwise described, and treating ends of posts, backs of chowkats, etc, area tarred exceeding 0.1 Sqm and not exceeding 0.5 Sqm each with tar or coal tar black paint complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed

S & F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

S & F in repairs 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed

S & F in repairs Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplescomplete all as specified and directed

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed

S&F 75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed

S&F Aluminium plate type II Gate and shutter, hook & eye 125 mm size complete all as specified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed

M&L Brick work with fly ash bricks, straight or curved on plan in half brick thickness built in cement mortar 1:6 complete all as specified and directed

M&L walling of random rubble uncoursed well bonded beded & solidly hearted built in CM 1:6 complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified and directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials where directed at low lying areas in defence land complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and directed.

Demolition of un-reinforced cement concrete above ground floor exceeding 15 cm thickness complete all as specified and directed.

M & L 75mm thick PCC (1:2:4) type B1 using 20mm graded crushed stone aggregate in floorings complete all as specified and directed

S&F glass dividing strips, 3mm thick 38mm width inserted in position conforming to design complete all as specified and directed

M & L for 50 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for providing 100 mm thick cement concrete 1:2:4 type B-2, using 40 mm graded crushed stone aggregate as in road / path, hard standing etc. with and including all necessary form work to divide the area in panels not exc. 9 Sqm each and providing 10 mm thick joints through out the thickness of road / path duly filled with mastic filling of one part of 85 / 25 hot bitumen and three part of coarse sand (By weight) with and including making impression of expanded metal whilst concrete is green complete all as specified and directed.

M&L for cement concrete designer tiles 25cm x 25cm x 22mm with mixture of white & grey cement in equal pro-portions & no pigments over and including 15mm thick screed bed in CM 1:4 fixing on the foot path complete all as specified and directed

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M & L reinforced cement concrete M-30 grade Design Mix , using 20 mm graded crushed stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for precast RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in slabs set in CM(1:6) complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed .

M&L for 110 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed .

S&F 75mm PVC(SWR) branch piece,single (single Y) equal or unequal with access door complete all as specified and directed

S&F 110 mm PVC(SWR) branch piece,single (single Y) equal or unequal with access door complete all as specified and directed

S & F 75 mm dia PVC Bends (any Radius) with access door complete all as specified and directed

S & F 110 mm dia , PVC Bends (any Radius) with access door complete all as specified and directed

S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed

S & F in repairs vitreous China squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing finishes of floor complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe complete all as specified and directed

S&F in repairs 15 mm dia PVC connection 450mm long complete all as specified and directed

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed .

S & F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 100 mm to 125 mm bore mild steel chromium plated grating fixed on floor trap/Nahni trap in CM 1:6 complete all as specified and directed

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs CP shower rose 75 mm dia with or without Swivel joints any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs 20mm dia Ball brass valves, high pressure,with polythene float and flynut complete, 'screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repairs 25mm dia Ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and complete all as specified and directed

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed

S&F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed

S&F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S&F Non-skid glazed ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 complete all as specified and as directed.

S&F vitrified ceramic tiles 10 mm thick (square or rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 complete all as specified and as directed

S&F Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling water tanks and removing to store exc 500 & not exc 1000 ltrs complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position,Cleaning repairing, etc measured separately, Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 litres and not exceeding 500 litres and from mouths of circulating pipes, etc complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position,Cleaning repairing, etc measured separately, Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 litres and not exceeding 1000 litres and from mouths of circulating pipes, etc complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position,Cleaning repairing, etc measured separately, Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 1000 litres and not exceeding 2000 litres and from mouths of circulating pipes, etc complete all as specified and directed

S&F Rotational moulded polythene water storage tanks of 500 litres capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F Rotational moulded polythene water storage tanks of 1000 litres capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

M&L preparation of new wooden surfaces excceding over 10 cm in width and girth and applying two coat of synthetic enamel paint over a coat of pink primer by using Auto roller or Airless Sprayer Machine complete all as specified and directed.

M & L preparing plastered or unplastered old decorated surfaces by using vaccume based hand held or long handle sander machine and applying one coat of white wash on walls and cornices complete all as specified and directed

Preparing old surfaces of ceilings by using vaccume based hand held or long handle sander machine and applying one coat of white wash complete all as specified and directed.

Preparing old decorated surfaces of walls by using vaccume based hand held or long handle sander machine and applying one coat of colour wash complete all as specified and directed.

M & L preparing plastered or unplastered old decorated surfaces by using vaccume based hand held or long handle sander machine and claning the surfaces by using Jet washer and applying one coat of cement based paint on walls and cornices by using Auto roller or Airless sprayer machine complete all as specified and directed

Preparing old painted surfaces by using vaccume based hand held or long handle sander machine and applying a coat of distemper oil emulsion by using Auto roller or Airless sprayer machine on surfaces of walls complete all as specified and directed.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) using Auto roller or Airless spray machine complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint using Auto roller or Airless spray machine complete all as specified and directed.

Supply & fix in repairs curtain rods of aluminium annodised fixed alongwith 2 Nos. of brackets complete all as specified and directed. Extra bracket shall be provided where ever the length increases more than 6 feet and quoted rates shall be deemed to be inclusive of same.

M & L Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high complete all as specified and directed

S&F in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber to timber frame work complete all as specified and directed

S & F in repairs Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and directed

S & F in repairs Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed with 20mm bore dia pipe complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

GS ENGINEERS

ANJANA ENTERPRISES

RAM SREE CONSTRUCTIONS

M/s Sai Venkata Durga Constructions

SAI SAMPATH ELECTRICAL AND ENGINEERING