Construction of New Advocate Building at District Court Morbi, Dist.Morbi

Name of Work :-Construction of New Advocate Building at District Court Morbi, Dist.Morbi

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

1 0.30 Clearing and grubbing road land including uprooting rank vegetation grass Hect 28455.09 Rupees Twenty Eight

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier Thousand Four Hundred

and disposal of unserviceable materials (C) By mechanical means in area of light jungle Fifty Five Paise Nine Only

2 1500.00 Earthwork for embankment including breaking clods, dressing with all lead and lift (A) Cum 157.91 Rupees One Hundred Fifty

From Borrow pits within land width Seven Paise Ninety One

3 1500.00 Rolling & Watering of earthwork in layers with power roller including filling in depressions Cum 22.96 Rupees Twenty Two Paise

which occur during the process. As directed Ninety Six Only

4 887.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of Cum 265.05 Rupees Two Hundred Sixty

useful materials and disposing off the excavated stuff upto all lead & Lift.(C) Hard Five Paise Five Only

5 502.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking Cum 287.21 Rupees Two Hundred

of useful materials and disposing off the excavated stuff upto all lead & Lift.(C) Hard Eighty Seven Paise Twenty

Murrum One Only

6 822.00 Box cutting the road surface to proper slope and camber for making a base for road work Cum 109.24 Rupees One Hundred Nine

including removing the excavated stuff and depositing on the road side slope as directed Paise Twenty Four Only

7 392.00 Providing and Laying W.B.M., in one layers, using B.T.M.C. metal of size 40mm to 63mm Cum 1255.20 Rupees One Thousand Two

in layers including 16% stone screening 13.2mm size and 8% stone dust as filler, including Hundred Fifty Five Paise

spreading, watering and cosolidation by vibratory roller as per MoRTH specifications etc. Twenty Only

complete as directed by Engineer-in-charge.

8 160.00 Providing and laying ordinary cement concrete M.150 for curing complete including cost of Cum 4727.19 Rupees Four Thousand

formwork and reinforcement for reinforced concrete work in Foundations, footings,Base of Seven Hundred Twenty

columns and Mass concrete. Seven Paise Nineteen Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

9 362.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3 coarse sand : 6- hand broken Cum 3095.25 Rupees Three Thousand

stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in Ninety Five Paise Twenty

(A) Foundation and Plinth Five Only

10 157.00 Pro. & laying controlled cement concrete M-250 and curing complete inclu. the cost of form Cum 4457.34 Rupees Four Thousand

work and foundation, footings, base of column and mass concrete. Four Hundred Fifty Seven

Paise Thirty Four Only

11 101.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6026.12 Rupees Six Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Plinth Twenty Six Paise Twelve

12 133.00 Brick work using common burnt clay building bricks having crushing strength not less than Cum 4245.09 Rupees Four Thousand

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Two Hundred Fourty Five

Conventional Paise Nine Only

13 677.00 Filling available excavated earth (excluding rock) in trenches. plinth, sides of Cum 136.92 Rupees One Hundred

foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited Thirty Six Paise Ninety

layer by ramming and watering. Two Only

14 156.00 Filling in plinth with sand under floors including watering ramming, consolidating and Cum 481.80 Rupees Four Hundred

dressing complete Eighty One Paise Eighty

15 585.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness Cum 301.78 Rupees Three Hundred One

including watering, ramming and consolidating etc. complete. Paise Seventy Eight Only

16 780.00 Carring out plinth treatment to post construction / existing structure by spraying chemical SqM 124.35 Rupees One Hundred

solution for termite control treatment including labour and material consistment with I.S.I Twenty Four Paise Thirty

specification. Using Chlordene and Chiorpurfiles 20 EC.As Per 6131_paret-II Five Only

Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical /Sqm of surface is recommended as per I.S

17 163.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 7407.57 Rupees Seven Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Four Hundred Seven Paise

Column. Fifty Seven Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

18 331.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6482.69 Rupees Six Thousand Four

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Beam Hundred Eighty Two Paise

Sixty Nine Only

19 361.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6686.44 Rupees Six Thousand Six

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Slab Hundred Eighty Six Paise

Fourty Four Only

20 83.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 6064.88 Rupees Six Thousand Sixty

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Four Paise Eighty Eight

Vertical and Horizontal fins. Only

21 16.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6026.11 Rupees Six Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintel Twenty Six Paise Eleven

22 20.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 6510.42 Rupees Six Thousand Five

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Hundred Ten Paise Fourty

Chhajja Two Only

23 14.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 6989.20 Rupees Six Thousand Nine

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Stair Hundred Eighty Nine Paise

Case. Twenty Only

24 195260.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding kg 77.29 Rupees Seventy Seven

and placing in position complete. Paise Twenty Nine Only

25 390.00 Brickwork using common burnt Clay building bricks having crushing strength not less than Cum 4526.81 Rupees Four Thousand Five

35 kg./Sq.Cm. in Super structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand). Hundred Twenty Six Paise

Eighty One Only

26 869.00 Half brick masonry in common brunt clay building bricks having crushing strength not less SqM 696.33 Rupees Six Hundred Ninety

than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of 6mm Six Paise Thirty Three Only

Mild steel round bars after every three course embedded in Cement Mortar in foundation

and plinth (B) Conventional

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

27 2353.00 Providing 10mm thick cement plaster in Double coat on RCC Columns, Beams & Ceillings Sqm 122.26 Rupees One Hundred

for interior plastering With Single Coat Mala Plaster in(i)Cement mortar 1:4 (1-cement:4- Twenty Two Paise Twenty

28 2224.00 Providing 15mm thick cement plaster in Double coat on Rough (Similar)side of single or Sqm 211.82 Rupees Two Hundred

half brick walls,RCC Column, Beams for interior plastering and finished With Double Eleven Paise Eighty Two

Coat Mala Plaster in (i) Cement mortar 1:3 (1-cement:3-sand) Only

29 2227.00 20mm thick sand faced GUTAKA FINISHED cement plaster on walls above ground level SqM 315.69 Rupees Three Hundred

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick Fifteen Paise Sixty Nine

finishing double coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Only

30 71.00 Providing and filling cinder inlcuding watering and consolidation etc complete. CuM 602.25 Rupees Six Hundred Two

Paise Twenty Five Only

31 1032.00 Providing throating or plaster drip and moulding to R.C.C.Chhajja. Rmt 43.05 Rupees Fourty Three Paise

32 397.00 Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at SqM 414.40 Rupees Four Hundred

junction the Brick.masonary and reinforcement cement concrete member, work done before Fourteen Paise Fourty Only

plastering work including scaffolding etc complete.

33 238.00 Providing and laying Mirror polished Machine polished Granite stone slab 18 mm Sqm 3127.38 Rupees Three Thousand

(Average) thick for For Doors / WIndows cill & Jams Clading as per design incl. full One Hundred Twenty

moulded round front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 - Seven Paise Thirty Eight

cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing Only

34 2323.00 P & L vitrified (Soluble Salt) 8 mm thick tile flooring over 20 mm (average) base of cement Sqm 1476.54 Rupees One Thousand Four

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Hundred Seventy Six Paise

adhesive material including dismentaling of existing flooring and jointed with color cement Fifty Four Only

slurry including finised with flush pointing & cleaning the surface etc. complete for shade

approved by architect as per Arch. drawing.

35 114.00 P & L vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 Sqm 1467.72 Rupees One Thousand Four

cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material Hundred Sixty Seven Paise

including dismentaling of existing flooring and jointed with color cement slurry including Seventy Two Only

finised with flush pointing & cleaning the surface etc. complete for antiskit

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

36 104.00 P & L full body readymade vitrified step-tiles 10-12 mm thick tile of 150x30 cm treads and Sqm 1679.82 Rupees One Thousand Six

150x15 cm risers with half round nosing antiskit flutes in place 7.5 cm skirting of the same Hundred Seventy Nine

as aproved over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on Paise Eighty Two Only

new surface or fixing on existing flooring by adhesive material of existing flooring and

jointed with color cement slurry including finised with flush pointing & cleaning the surface

37 66.00 Providing and laying polished blue Kota stone slab flooring over 20mm (Average) thick Sqm 1013.87 Rupees One Thousand

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - Thirteen Paise Eighty Seven

coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the Only

shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

38 157.00 Providing and laying Ceramic tiles 6mm thick in flooring with 3mm groove & Epoxy Sqm 1138.50 Rupees One Thousand One

grouting laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Thirty Eight Paise

finishing with flush pointing in white cement. Fifty Only

(Extra for epoxy grouting 8 Rmt in 1 SqM = 15*8)

39 772.00 Providing and laying coloured glazed tiles of the size 8 mm to 10 mm in skirting, risers of Sqm 1488.24 Rupees One Thousand Four

steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with Hundred Eighty Eight Paise

Colored cement slurry. Twenty Four Only

40 810.00 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 Sqm 779.70 Rupees Seven Hundred

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to Seventy Nine Paise Seventy

be tempered to bring mortar creme out upto surface using white cement including Only

rounding off junctions and extending them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

41 835.00 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded SqM 339.08 Rupees Three Hundred

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of Thirty Nine Paise Eight

neat cement. (B) 50mm thick. Only

42 4577.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of Sqm 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

43 4577.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on Sqm 89.89 Rupees Eighty Nine Paise

undecorated wall/Celing surface to give an even shade including throughly brushing the Eighty Nine Only

surface free from mortar droppings and other foreign matter and sand papered smooth.

44 2227.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to Sqm 120.26 Rupees One Hundred

give an required shape even shade after thoroughly brushing the surface to remove all dirt, Twenty Paise Twenty Six

and remains of loose powdered materials.etc complete Only

45 4965.00 Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat Kg. 130.38 Rupees One Hundred

of primer and two coat oil paint as per details given by architect. as per attached detail Thirty Paise Thirty Eight

architectural drawing. Only

46 18.00 Providing And Fixing Double Shutter Anodized Section Frame And Entrace door with floor Sqm 6363.95 Rupees Six Thousand Three

spring & pivoted shutter made from T.W. 5 cm x 15 cm styles and 6 Nos. 5 cmx5 cm T.W. Hundred Sixty Three Paise

rails covered with 6 mm thhick water proof ply finished with both sides laminates colour Ninety Five Only

and shape approved by architect. 60 cm long S.S. handel on both shutter And S.S.Fixtures &

Locking Arrangement On Each Shutter, etc As Per Selection. As Directed.

47 53.00 Providing And Fixing Anodized Aluminium Section Frame Equivalent to Jindal Door Sqm 5064.32 Rupees Five Thousand

Section No 19552 - Weight Not Less Than 1.1 kg/mt. With Wooden Inserts For Durable Sixty Four Paise Thirty Two

Grip of Door Hinges (Frame Size 38mm x 63.5mm) Single/Double 38mm thick solid core Only

Wooden Flush Shutter Confirming To Is:2202 & Isi Approved Manufacturer, Covered With

1mm Thick Laminates On Each Side Of Shutter, Teakwood Beading On Periphery, 150mm -

200mm S.S.Handles And S.S.Fixtures & Lockion. As Directed.

48 68.00 Providing and fixing Frame : 45x90 mm solid wpc (Wood plastic composite) door frame Sqm 5432.08 Rupees Five Thousand Four

with rebate of 37mm. The door frame having density of 850 km/Cum. Including architrave Hundred Thirty Two Paise

of 45 x 16mm (press fit fixing(. All joints are miter joints. Fully finished with selected PVC Eight Only

Laminate foil. Brands : Flexibond/ Path / Kaka / Ecoste / Ecotimvber with 5 years warrenty.

Single shutter : 28 mm thick Solid WPC (wood plastic composite) door shutter, finished

with HPL lamination & UV coating. It should be having density of 850 Kg/Cum. Fully

finished with selected PVC leminate foil Flexibond/ Path / Kaka / Ecoste / Ecotimvber with

5 years warrenty.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

49 79.00 Providing and fixing Four Track window Standard Extruded Color Anodized Aluminum Sqm 4754.65 Rupees Four Thousand

Section Equivalent To Jindal Series C (20mm) Section Numbers: Frame Bottom Track Seven Hundred Fifty Four

21651, Frame Top & Sides 21650, Shutter Top Rail 20530, Bottom Rail 20529, Side Rails Paise Sixty Five Only

20544, Interlock Rails 20531. With 5mm Thick Transparent Tinted Float Glass, With

Rubber Gasket, Air Lock Strip And Finishing Joints With Transparent Silicon Sealant, With

Alluminium Powder Coated & 1 shutter of SS mosquito net shutter with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc complete for window.

50 108.00 Providing and fixing Three Track window Standard Extruded Color Anodized Aluminum Sqm 4858.09 Rupees Four Thousand

Section Equivalent To Jindal Series E (30mm) Section Numbers: Frame Bottom Track Eight Hundred Fifty Eight

20878, Frame Top & Sides 20877, Shutter Top Rail 21675, Bottom Rail 20772, Side Rails Paise Nine Only

20544, Interlock Rails 20550. With 5mm Thick Transparent Tinted Float Glass, With

Rubber Gasket, Air Lock Strip And Finishing Joints With Transparent Silicon Sealant, With

Alluminium Powder Coated & 1 shutter of SS mosquito net shutter with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc complete for window.

51 11.00 Providing and fixing Standard Extruded Colour Anodized Alluminium Section, Sqm 2822.09 Rupees Two Thousand

Equivalent To Jindal Section Frame - 21458, With 5Mm. Thick Frosted Glass Adjustable Eight Hundred Twenty Two

Louvers Of Standard Make as per instructions given by engineer in charge. Paise Nine Only

52 95.00 Providing and fixing CUPBOARD shutters using 19 mm thick waterproof plywood ( ISI SqM 7715.95 Rupees Seven Thousand

710) and fixing minimum 0.8 mm thick decorative lamination sheet (20 mm x 2 mm) Seven Hundred Fifteen

Plywood frame having a size 7 cm x 4 cm and also provide drawer with tendum of min Paise Ninety Five Only

60cm size and min 3 no. of shelves using necessary fixtures, fastening, nails, fevicol, ball

catch, magnet and innerside of cupboard oil painting two coats with primer coat etc.

complete as per detailed drawing and laminate will be selected by engineer in charge.

53 89.00 Providing and fixing stainless steel modular side mounted railing at 900-1000mm height and Rmt 3254.87 Rupees Three Thousand

of SS pipe with support of horizontal pipe as 15mm dia at required spacing as per design by Two Hundred Fifty Four

engineer in charge and SS having 316 grade and 15 guage pipe including fastening, hold Paise Eighty Seven Only

fast, clumps, coach bolts for fixing to wall including touching finishing to wall etc complete

approved by Architect.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

54 62.00 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in qntl 9108.48 Rupees Nine Thousand One

position and applying a priming coat of red lead paint. (A)In beams and joists, channels Hundred Eight Paise Fourty

angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip Eight Only

and jack rafters, purlins conneted to common rafters and the like

55 61.00 Providing and fixing fix louvers: 114 mm wide G.I. sheet having thickness of 0.55 mm & Rmt 3694.58 Rupees Three Thousand Six

weight not less than 490 gm /meter, roll formed to create 84 mm wide louver snap fixed on Hundred Ninety Four Paise

special shaped G. I. Channel. Fix louvers & Channels shall finished with powder coating of Fifty Eight Only

55 micron per detailed drawing and as directed by Engineer in charge etc.complete.

56 34.00 Providing & laying Granite shelves to C.B. with making the grooves in the walls and fixing SqM 2197.45 Rupees Two Thousand One

the same complete. Hundred Ninety Seven

Paise Fourty Five Only

57 60.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 170.36 Rupees One Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. Seventy Paise Thirty Six

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete.[A] 15 mm.

58 60.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 253.82 Rupees Two Hundred Fifty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Three Paise Eighty Two

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete.[C] 25 mm.

59 150.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 447.72 Rupees Four Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. Fourty Seven Paise Seventy

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Two Only

complete.[E] 40 mm.

60 150.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 660.58 Rupees Six Hundred Sixty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Paise Fifty Eight Only

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete.[F] 50 mm.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

61 360.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 72.65 Rupees Seventy Two Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Sixty Five Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

62 360.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 91.84 Rupees Ninety One Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

63 540.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 148.12 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Fourty Eight Paise Twelve

wall with the help of clamp at every two metre C/C or shall be concealed as directed Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

64 610.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 195.67 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty

wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

65 675.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene Rmt 280.23 Rupees Two Hundred

pipes of the following outside Dia. Low densidy, complete with special falnge compression Eighty Paise Twenty Three

type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Only

66 409.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 297.80 Rupees Two Hundred

suitable for potable water with ring fit joints including cost of rings, as per IS specification Ninety Seven Paise Eighty

no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Only

inspection charges, loading, unloading conveyance to the site and including cost of joining

materials etc. complete. PVC pipe Test pressure 6 Kg/cm3-110mm Dia

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

67 280.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 613.27 Rupees Six Hundred

suitable for potable water with ring fit joints including cost of rings, as per IS specification Thirteen Paise Twenty

no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Seven Only

inspection charges, loading, unloading conveyance to the site and including cost of joining

materials etc. complete. PVC pipe Test pressure 6 Kg/cm3-160mm Dia

68 25.00 Providing and fixing in position cowel went to pipes.(B) 75mm dia. Each 393.04 Rupees Three Hundred

Ninety Three Paise Four

69 25.00 Providing and fixing in position cowel went to pipes.(C) 100mm dia Each 505.17 Rupees Five Hundred Five

Paise Seventeen Only

70 6.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 89.83 Rupees Eighty Nine Paise

Eighty Three Only

71 60.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali Each 586.27 Rupees Five Hundred

of the following nominal diameter of self cleansing design with C.I scread down or hinged Eighty Six Paise Twenty

grating including the cost of cutting and making good the walls. Seven Only

72 75.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. Each 205.83 Rupees Two Hundred Five

Paise Eighty Three Only

73 21.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia Each 186.83 Rupees One Hundred

Eighty Six Paise Eighty

74 21.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 420.63 Rupees Four Hundred

Twenty Paise Sixty Three

75 33.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Each 663.43 Rupees Six Hundred Sixty

Three Paise Fourty Three

76 45.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 254.78 Rupees Two Hundred Fifty

including fixing in pipe line etc. complete.(i) 20mm dia. Four Paise Seventy Eight

77 90.00 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap Each 186.83 Rupees One Hundred

polished bright. (i) 15mm dia. Eighty Six Paise Eighty

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

78 30.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks Each 308.73 Rupees Three Hundred

and back nuts. (i) 15mm dia. Eight Paise Seventy Three

79 45.00 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each Each 282.16 Rupees Two Hundred

Eighty Two Paise Sixteen

80 30.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on Each 859.41 Rupees Eight Hundred Fifty

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws Nine Paise Fourty One Only

81 30.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets Each 1581.77 Rupees One Thousand Five

painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only

82 21.00 Providing and fixing Urinal or approved quality including conecting the Urinal with waste Each 1074.86 Rupees One Thousand

pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x Seventy Four Paise Eighty

260mm x 350mm. Six Only

83 24.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S Each 1356.81 Rupees One Thousand

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) Three Hundred Fifty Six

(Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in Paise Eighty One Only

84 12.00 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm Each 987.14 Rupees Nine Hundred

(Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Eighty Seven Paise

Vitreous China.(I) Long pattern = White colour Fourteen Only

85 36.00 Providing and fixing toilet paper holder.(A) C.P. Brass Each 427.99 Rupees Four Hundred

Twenty Seven Paise Ninety

86 45.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden Each 616.42 Rupees Six Hundred

plugs with C.P. brass scews.(B) 600mm x 20mm size. Sixteen Paise Fourty Two

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

87 20000.00 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required Lit 3.95 Rupees Three Paise Ninety

capacity each with all necessary fittings and connection etc. complete on terrace. Five Only

(Confirming IS 12701) aprooved makes only.

88 12.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends each 2932.93 Rupees Two Thousand

with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with Nine Hundred Thirty Two

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to Paise Ninety Three Only

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

89 30.00 Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size No 2027.98 Rupees Two Thousand

finished with radium sticker including necessary scaffolding for fixing with epoxy material Twenty Seven Paise Ninety

etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are Eight Only

consider as a half letter)

90 430.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm SqM 706.93 Rupees Seven Hundred Six

thick with grade of concrete M250 pnumatic compressed/vibrated mechanically and as per Paise Ninety Three Only

approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018

etc. Complete. equivalent to vyara and saple must selected by office.

91 954.46 Providing and fixing Pre-Cast Concrete Kerb Stone of gray cement based concrete block Rmt 374.92 Rupees Three Hundred

30cm. length, 30cm. height and 15cm. thick of M-250 Grade concrete as per approved Seventy Four Paise Ninety

design and including excavation for fixing in proper line and level, filling the joint with Two Only

C.M. 1:3 (1-Cement : 3-Fine Sand) etc. complete

92 217.00 Providing And Fixing Anodized Aluminium Section Frame Partition with frame and Door SqM 3017.72 Rupees Three Thousand

Required Equivalent to Jindal Door Section No 19552 - Weight Not Less Than 1.1 kg/mt. Seventeen Paise Seventy

with frame size 63.50 mm x 38.10 mm. for fixed partition including 5 mm. thick transparent Two Only

glass and 4 mm. thick Formica sheet including jumbo rubber biding clips etc. complete

Door Closer .Handles And Fixtures & Lockion. As Directed.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

93 23.00 Providing and fixing up to floor two level precast terracotta jali or grill of approved design SqM 3514.02 Rupees Three Thousand

and pattern, manufactured from natural fired clay units, minimum 100 mm thick, including Five Hundred Fourteen

reinforcement with 1.6 mm dia. mild steel wire where required, surface roughening, Paise Two Only

cleaning, fixing and finishing in cement mortar 1:3, and curing complete as per

specifications.

94 80.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 659.99 Rupees Six Hundred Fifty

culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes Nine Paise Ninety Nine

in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Only

daimeters.(i) 300mm dia.

95 100.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 2107.87 Rupees Two Thousand One

culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of Hundred Seven Paise

slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated technology of following Eighty Seven Only

internal diameter. (iv) 600 mm dia.

96 100.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for 0.00 1968.38 Rupees One Thousand Nine

culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes Hundred Sixty Eight Paise

in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Thirty Eight Only

daimeters.(iii) 600mm dia.

97 16.00 Constructing Brick masonry road gully chamber 450mm x 450mm x 775mm with vertical No 2545.86 Rupees Two Thousand Five

gating complete. Hundred Fourty Five Paise

Eighty Six Only

98 15.00 Providing and constructing 'A' type Sewer manholes, scraper manhales and unit house No 18995.07 Rupees Eighteen Thousand

connection chamber, as per the type design m brick masonry m CM15 and inside and Nine Hundred Ninety Five

outside 20mm thick plastering in C. M 1-3 necessary 100 mm coping with reinforcement in Paise Seven Only

RC CM 200 fixing C 1 steps and fixing manhole frame and covers over manholes and house

connection chambers and fixing Manhole covers over scraper manhole etc complete.

providing and fixing safety chain wherever necessary as per the stipulations in the type

design complete as per latest CPHEEO manual.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

99 329.00 Providing and laying in position Control concrete M-300 grade concrete for using cement Cum 5337.35 Rupees Five Thousand

content as per approved improve workability without impiring strength and durability as per Three Hundred Thirty

direction of the engineer-in-charge. (Min cement level as per latestIS 456 shall be Seven Paise Thirty Five

maintained) (Cement level 410kg) for require thickness Trimix C.C. Road with trimix work Only

with power trowling sheet form with M.S. Channles, surface vibrator with providing road

expansion joint having size thickness h/3 deep minimum by concrete cutter machine and

filled with Bitumin, finishing with Surface hardner 1 sqmt./1.5 kg etc. necessary all

eqipments, all labour charges complete.

100 149.00 Road marking with hot applied thermoplastic paints with reflectorising glass beads on SqM 367.72 Rupees Three Hundred

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick Sixty Seven Paise Seventy

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is Two Only

excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge

line/cut patta. The white color marking should provide liminance coefficinet on cemend

road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during

the service life during the day time. The marking should meet the performance criteria for

night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of

IRC 35-2015. Warranty for the Retro reflectivity should be two years.

101 150.00 Drilling of 215mm dia bore hole in over burden strata (alternative layer of lime stone and Rmt 551.46 Rupees Five Hundred Fifty

yellow stridly formation) by DTH regi. up to required depth including fixing of 175/180 dia One Paise Fourty Six Only

ERW/PVC pipe if required drilling by 165mm dia bore hole in hard rock strata DTH drilling

method up to total 120 mt.

102 150.00 HDPE Pipe for require dia. Rmt 551.46 Rupees Five Hundred Fifty

One Paise Fourty Six Only

103 1.00 Providing and fixing of M.S. Bore plug of required capacity etc. complete. No 1919.00 Rupees One Thousand Nine

Hundred Nineteen Only

104 520.00 Plantation of carpet type lawn including labour materials , watering and growing etc. and SqM 113.12 Rupees One Hundred

maintaining same upto six months. Thirteen Paise Twelve Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

105 130.00 Plantation of flower bed with selected flower plant including planting the same at 45 CM SqM 441.37 Rupees Four Hundred

apart and growing the same including maintenance upto six months. Fourty One Paise Thirty

106 20.00 Planting of hedge with selected hedge plant like Golden , Duranta, Red Bhaji or selected Rmt 207.05 Rupees Two Hundred

plant @ 45 CM apart and maintenance upto six months. Seven Paise Five Only

107 20.00 Planting of selected shrubb trees like Ticoma, Nerium or other selected plant including No 70.70 Rupees Seventy Paise

preparing pit of size 30 x 30 x 30 CM and filing with selected garden soil including manure, Seventy Only

fertilizer and maintenance up to six months.

108 20.00 Providing Three plants having minimum 1.00 mt. hight and healthy growth of various kinds No 80.80 Rupees Eighty Paise Eighty

as like peltroform, Gulmahore, Karanj, Ambla, Rain tree, Sapparni, Cherry, Cryjeliya, Only

Spethodiya, Paras Pipala, Garmali, Neem, Borsalli, Kadam, Buch, Chanpo, Asopalav and as

109 20.00 Providing tree plants having minimum 1.00 mt height and health growth of bottle palm tree, No 2903.75 Rupees Two Thousand

Cycus palm and other palm tree planting including 30 x 30 x 30 Cm. pit filling with selected Nine Hundred Three Paise

garden soil including manure, fertilizer and maintenance upto six month. Seventy Five Only

110 281.00 Providing and Fixing Roof panel shall be made out of 0.5 mm thick precoated sheet. The SqM 959.50 Rupees Nine Hundred Fifty

precoated sheet shall be of minimum 240mpa steel grade conforming to IS 14246-1995 and Nine Paise Fifty Only

shall have zinc coating of minimum 120 gsm as per IS 277-1992, 5-7 microns epoxy primer

on both side of sheet and polyester top 15-18 microns. The PPGI sheet shall have plastic

protective guard film of minimum 25 microns to avoid scratches during transportations. The

sheet should be fixed to the steel member by pop rivets or self drilling / self stiching fastners

@ maximum 450 mm c/c along the length of capping / flashing etc. complete.

111 Supplying, installing, testing and commissioning of GI 'C' class pipe line confirming to IS

1239 with Reducers, elbows, flanges. necessary flanges, laying of pipe, proper supports at

bottom. The pipes shall be painted with primer & Paint using approved type, M.S. supports

at standard spacing, anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt,

including cutting, Welding, fixing in / on walls, ceiling by using the supports etc, (Including

Fittings.) (ISI)(Approx.)

111.1 230.00 25 mm dia Mtrs. 475.71 Rupees Four Hundred

Seventy Five Paise Seventy

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

111.2 230.00 50 mm dia Mtrs. 794.87 Rupees Seven Hundred

Ninety Four Paise Eighty

111.3 100.00 65 mm dia Mtrs. 1014.04 Rupees One Thousand

Fourteen Paise Four Only

111.4 80.00 80 mm dia Mtrs. 1133.22 Rupees One Thousand One

Hundred Thirty Three Paise

Twenty Two Only

111.5 80.00 100 mm dia Mtrs. 1513.99 Rupees One Thousand Five

Hundred Thirteen Paise

Ninety Nine Only

112 15.00 SITC of 19 mm dia hose reel 30m length as per IS 5132 fitted with nozzle and shut off valve Nos. 5046.08 Rupees Five Thousand

(IS 884 - 1969). The hose reel shall be recessed swing type with reel drum. The hose shall Fourty Six Paise Eight Only

be provided with coupling as per detailed specifications.

113 15.00 SITC Ball valve 20 mm Nos. 762.75 Rupees Seven Hundred

Sixty Two Paise Seventy

114 15.00 SITC of Hydrants single headed S.S 63mm dia landing valve. Nos. 4021.13 Rupees Four Thousand

Twenty One Paise Thirteen

115 15.00 SITC 15 mtrs. long 63 mm dia RRL hose with SS Male & Female Coupling. (ISI) Nos. 4444.22 Rupees Four Thousand

Four Hundred Fourty Four

Paise Twenty Two Only

116 15.00 SITC of 63mm dia SS Short branch pipe. (ISI) Nos. 1650.64 Rupees One Thousand Six

Hundred Fifty Paise Sixty

117 15.00 SITC of Hose cabinet to accommodate 1 sets of hose of 15mt length 1 branch pipe with Nos. 4891.15 Rupees Four Thousand

nozzle. The cabinet is made of MS sheet with a 1 door, glass font with hinged door and Eight Hundred Ninety One

lock. The cabinet is painted to scarlet red colour & wall mounted. (AS PER IS) Paise Fifteen Only

118 1.00 SITC fire brigade inlet connection conforming to IS 5290 comprising of 2 Nos. 63mm dia Nos. 5942.31 Rupees Five Thousand

couplings complete Fire hydrant ring main and fire hydrant wet riser pipe. Nine Hundred Fourty Two

Paise Thirty One Only

119 1.00 Supply of fire fighting pump having cast iron casing, alloy bronze impellers and difusers, Set 98101.50 Rupees Ninety Eight

Pump shall be directly coupled to 2900 RPM 415 V 50 cys. AC 3 phase TEFC squirrel Thousand One Hundred

cage motor, Centrifugal 900 LPM@ 60 METER HEAD Pump. One Paise Fifty Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

120 1.00 Supply, of single outlet diffuser horizontal type centrifugal pump of capacity 180 LPM at 60 Set 46956.74 Rupees Fourty Six

METER HEAD with 2900 RPM Motor including all accessories. Thousand Nine Hundred

Fifty Six Paise Seventy

121 400.00 Structural fabricated MS supports. kg 144.21 Rupees One Hundred

Fourty Four Paise Twenty

122 SITC of Butterfly Valve (BFV)

122.1 3.00 50 mm dia Nos. 3707.71 Rupees Three Thousand

Seven Hundred Seven Paise

Seventy One Only

122.2 3.00 65 mm dia Nos. 4190.49 Rupees Four Thousand One

Hundred Ninety Paise

Fourty Nine Only

122.3 3.00 80 mm dia Nos. 4890.42 Rupees Four Thousand

Eight Hundred Ninety

Paise Fourty Two Only

122.4 7.00 100 mm dia Nos. 6518.54 Rupees Six Thousand Five

Hundred Eighteen Paise

Fifty Four Only

123 SITC of NRV Dual plate

123.1 1.00 100 mm dia Nos. 4227.31 Rupees Four Thousand

Two Hundred Twenty

Seven Paise Thirty One

123.2 1.00 50 mm dia Nos. 2133.32 Rupees Two Thousand One

Hundred Thirty Three Paise

Thirty Two Only

124 SITC of NRV single plate

124.1 1.00 100 mm dia Nos. 3257.19 Rupees Three Thousand

Two Hundred Fifty Seven

Paise Nineteen Only

125 SITC of Strainer

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

125.1 1.00 100 mm dia Nos. 8729.29 Rupees Eight Thousand

Seven Hundred Twenty

Nine Paise Twenty Nine

125.2 1.00 50 mm dia Nos. 3267.92 Rupees Three Thousand

Two Hundred Sixty Seven

Paise Ninety Two Only

126 SITC of Foot Valve

126.1 1.00 100 mm dia Nos. 12249.32 Rupees Twelve Thousand

Two Hundred Fourty Nine

Paise Thirty Two Only

126.2 1.00 50 mm dia Nos. 4745.75 Rupees Four Thousand

Seven Hundred Fourty Five

Paise Seventy Five Only

127 3.00 SITC of Pressure Gauge Nos. 989.19 Rupees Nine Hundred

Eighty Nine Paise Nineteen

128 2.00 SITC of Pressure switch Nos. 1728.11 Rupees One Thousand

Seven Hundred Twenty

Eight Paise Eleven Only

129 2.00 SITC of Air Release Valve Nos. 1948.59 Rupees One Thousand Nine

Hundred Fourty Eight Paise

Fifty Nine Only

130 SITC Ball valve

130.1 4.00 25 mm Nos. 1212.06 Rupees One Thousand Two

Hundred Twelve Paise Six

130.2 5.00 15 mm/10 mm/8mm Nos. 524.39 Rupees Five Hundred

Twenty Four Paise Thirty

131 1.00 SITC of Main Fire Fighting Control Panel with Auto Control System. Set 35376.70 Rupees Thirty Five

Thousand Three Hundred

Seventy Six Paise Seventy

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

132 1.00 SITC of Cable For above panel & pump ISI L/s 22361.40 Rupees Twenty Two

Thousand Three Hundred

Sixty One Paise Fourty

133 8.00 Anti vibration rubber pad Nos. 225.25 Rupees Two Hundred

Twenty Five Paise Twenty

134 200.00 Supplying, installing, testing and commissioning conventional Sprinkler quartzoid bulb type Nos. 349.20 Rupees Three Hundred

with 15mm screwed end connection of 68 deg. C. temperature rating. (Pendent/Upright Fourty Nine Paise Twenty

135 1.00 Fire alarm panel conventional 2 zone Nos. 6833.78 Rupees Six Thousand Eight

Hundred Thirty Three Paise

Seventy Eight Only

136 2.00 Batteries 12V, 7.2/7.5AH Nos. 1430.16 Rupees One Thousand Four

Hundred Thirty Paise

137 10.00 MCP Nos. 756.79 Rupees Seven Hundred

Fifty Six Paise Seventy

138 4.00 HOOTER Nos. 852.14 Rupees Eight Hundred Fifty

Two Paise Fourteen Only

139 600.00 Flexible cable 2 core 1.5 sqmm FR( Approx) Mtr 75.08 Rupees Seventy Five Paise

140 15.00 Co2 4.5kg Fire extinguisher explosive Nos. 7069.76 Rupees Seven Thousand

Sixty Nine Paise Seventy

141 15.00 ABC 6kg Fire extinguisher Nos. 2638.65 Rupees Two Thousand Six

Hundred Thirty Eight Paise

Sixty Five Only

142 12000.00 UV Digital Printed Glow in Dark Foam Sheet Sq.Inch 2.98 Rupees Two Paise Ninety

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

143 140.00 Providing and Arranging table having 40mm thick top overall thickness made from 18mm No 10192.92 Rupees Ten Thousand One

thick MR grade plywood, top and side finish with 1 mm thick Laminate both side (inside Hundred Ninety Two Paise

and outside) to be Laminated and top back side 0.8mm balancing laminate including teak Ninety Two Only

wood border patty of size 40mm x 12mm. Whole table having MS CRCA Pipe framing of

50mm x 50mm x 1.6mm size and 50mm x 25mm x 1.8mm size finished with epoxy powder

coated of 50 micron thickness as per drawing / photograph and details including all

materials and labour etc. complete as per drawing and instruction of engineer-in-charge.

(with teakwood border)

Advocate Table : size - 1500mm x 750mm x 750mm

144 280.00 Medium back Chair :- Model Priviya-7003 Providing and Arranging Cushioned Seat & No 6868.00 Rupees Six Thousand Eight

back, PP outer back cover, PP arms, Single back lock, Push back mechanism, gas lift for Hundred Sixty Eight Only

seat height adjustment, five prong Nylon base with twin wheel nylon castor.Including all

materials and labour etc.Complete as per drawing and instruction of engineer-in charge.Size

: Max.Hight 1020mm Min.Height 930 mm,Seat : 500mm x 460mm ,Back: 500mm x

mm Medium Back Chair :Priviya-7003

145 980.00 Visitor Chair :- Model Vita 1001 Providing and Arranging fix chair having structure of No 3232.00 Rupees Three Thousand

CRCA M.S. pipe 20mm dia and 16 guage with 50 micron powder coated of approved seat Two Hundred Thirty Two

and back 40 density PU foam covered with fabric of approved shade and texture with one Only

year replacement warranty. Wooden armrest to be provided as per approved design.

Complete chair should be in suitable shape including all materials and labours etc. complete

as per drawing and instruction of engineer-in charge. Vita 1001 Chairs

146 10.00 Providing and fixing wall clock of the desired shape and design as seletced by Engineer-in- No 621.15 Rupees Six Hundred

charge. Twenty One Paise Fifteen

147 8.00 Providing and Arranging of 100 Litre capacity LLDPE solid waste bin having size at top No 2579.54 Rupees Two Thousand Five

500mm & bottom 350mm square, height 900mm having standard weight as per the Hundred Seventy Nine

manufacturer's specification of 1 unit including all necessary fixture, fastners, fittings, Paise Fifty Four Only

labour, material, machinary etc. complete as seletced and diretced by Engineer-in-charge.

Dustbin Big 100 lit :

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

148 5.00 Notice Board with Cupboard :- Notice Board size 900mm x 1200mm providing & fixing No 3838.00 Rupees Three Thousand

Notice board having 9mm soft board as a core materail 1mm laminate sheet as back materail Eight Hundred Thirty Eight

and surface of 1.mm felt cloths, having profile of heavy alumnuim fluted anodized profile Only

10 to 12 micron of 18 to 25 thick board C channel and corner is made uo of molded virgin

ABS grey colour hanging vertical and horizontal hanginh facilty as per selected colour &

size including all necesaary fixture , faster, fitting, labour material machinary etc complete

as selected and directed by engineer insharge. Approved make: Notice Board size 900mm x

149 5.00 Providing and supplying White Marker board of size 1200mm x 900 mm of aprooved ISI No 3863.25 Rupees Three Thousand

quality as per instructed by Engineer in-charge. Eight Hundred Sixty Three

Paise Twenty Five Only

150 2.00 Wheel Chair :-Providing & arranging Wheel chair for Physically Hanicapped person No 13327.96 Rupees Thirteen Thousand

having. Dimension 790 (L) X 600 (W) X 70 (H)MM . WITH FOLDABLE FRAME Three Hundred Twenty

Structure made of carbon steel setction 22 x 1.2 mm. A3 carbon sheet with crome finish Seven Paise Ninety Six Only

cross bars made of A3 carbon Steel material with setcion 25.4 x 1.2mm , 24 inch solid mag

wheels with alloy in the in the rim, hand rim of section 16 x 1.2 mm . carbon steel with

chrome finish, front wheel of 8 inch hub made of PA polymer and outer side of solid rubber

pu moulded armrest & base made of abs , leather finish calf rest and seat with cushion

alumuinum footrest with with updown movement having extended base footpress with

moulded plastic including handbrakes & full structure is anti rust chrome finish with user

capacity of 100kg. Including all neccasary fixture, fatser,fittings, labours materails

machinary etc complete as selected and directed by engineer incharge

151 10.00 Providing, fixing & Arranging boltless shelves (1 Main) having load bearing members made Nos 6121.61 Rupees Six Thousand One

of high strength CR/HR steel confirming to IS 5986 :2002 / IS 2062 : 2006 by using steel Hundred Twenty One Paise

confirming to is 5986- Fe 410 with minimum yield strength of 255 MPa The fasterners of Sixty One Only

grade 8.8 with galvanized finish including powder coating with thoroughly anti rust

treatment the upright component of T- shaped oxford blue finish of G 50 type having profile

width of 50mm. single piece of having Min. yield strength of 250Mpa shelves of 14 based

zinc coated finish having size of 1300 mm x 450 mm x32mm mounted on shelf clips clips

having profile setcion of (24 x 8 x 35)mm & 2 bends with galvanized surface finish stability

beam of setcion 65mm x 30mm with galvanized surface finish back tie of 5mm dia. of tie

rod, turn buckle of 90mm with galvanized surface finish all the components having powder

coating with thoroughly anti rust treatment including all necessary fixture, fastners, fittings,

labour material machinary etc. complete as seletced and diretced by Engineer-in-charge.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

152 302.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both Pt. 491.87 Rupees Four Hundred

are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Ninety One Paise Eighty

length , in below type of pipe erected with 6A Modular type switch / bell push & Seven Only

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(j) in existing pipe erected concealed in wall/ceiling complete

153 2.00 Bell Point Pt. 491.87 Rupees Four Hundred

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both Ninety One Paise Eighty

are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Seven Only

length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(j) in existing pipe erected concealed in wall/ceiling complete

154 159.00 Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of Pt. 144.43 Rupees One Hundred

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand Fourty Four Paise Fourty

copper wires, in below type of pipe to be erected complete with earth continuity and Three Only

necessary connection with primary light with accessories erected on Metal / PVC / wooden

box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed

wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary

(j) in existing pipe erected concealed in wall/ceiling complete

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

155 159.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI Pt. 667.61 Rupees Six Hundred Sixty

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, Seven Paise Sixty One Only

in below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(j) in existing pipe erected concealed in wall/ceiling complete Cat. III

156 51.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI Pt. 511.06 Rupees Five Hundred

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in Eleven Paise Six Only

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

(j) in existing pipe erected concealed in wall/ceiling complete Cat. III

157 112.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI Pt. 681.75 Rupees Six Hundred Eighty

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in One Paise Seventy Five

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on Only

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(j) in existing pipe erected concealed in wall/ceiling complete

158 116.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected Pt. 309.06 Rupees Three Hundred

on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Nine Paise Six Only

metallic/white front plate modules erected on / in wall / ceiling with following type

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

159 3.00 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 Pt. 617.11 Rupees Six Hundred

sq.mm (green) both are of .ISI marked 1.1 kV grade FRLS PVC insulated multi strand Seventeen Paise Eleven

copper wires erected in below type of pipe with 6A Modular type switches and following Only

type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as

(j) in existing pipe erected concealed in wall/ceiling complete

160 60.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 25.25 Rupees Twenty Five Paise

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Twenty Five Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(7) Blank Plate Single

161 221.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 160.59 Rupees One Hundred Sixty

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Paise Fifty Nine Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(8) Computer RJ-45 socket Cat.III

162 8736.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size Mtr. 24.24 Rupees Twenty Four Paise

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction Twenty Four Only

boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

163 2272.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size Mtr. 33.33 Rupees Thirty Three Paise

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction Thirty Three Only

boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

164 120.00 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, Mtr. 21.21 Rupees Twenty One Paise

PVC bushes, Check-nuts etc. complete of following sizes. Twenty One Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

165 140.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr. 58.58 Rupees Fifty Eight Paise

Copper conductor wire in following type of pipe to be erected concealed in /flushed on Fifty Eight Only

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(E) in existing pipe

(a) 2 wire 1.5 sq. mm

166 4051.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr. 78.78 Rupees Seventy Eight Paise

Copper conductor wire in following type of pipe to be erected concealed in /flushed on Seventy Eight Only

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(E) in existing pipe

(b) 2 wire 2.5 sq. mm

167 272.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr. 498.94 Rupees Four Hundred

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 Ninety Eight Paise Ninety

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Four Only

continuity of following size

(E) in existing pipe

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

168 42.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 70.70 Rupees Seventy Paise

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Seventy Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(e) One wire 6.00 sq. mm

169 72.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 115.14 Rupees One Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Fifteen Paise Fourteen Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(f) One wire 10.00 sq. mm

170 102.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 376.73 Rupees Three Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Seventy Six Paise Seventy

erected in existing pipe of following size (Specifically for control panel, relays, power Three Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(i) One wire 35.00 sq. mm

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

171 30.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 837.29 Rupees Eight Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Thirty Seven Paise Twenty

erected in existing pipe of following size (Specifically for control panel, relays, power Nine Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(k) One wire 70.00 sq. mm

172 12.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 1473.59 Rupees One Thousand Four

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Hundred Seventy Three

erected in existing pipe of following size (Specifically for control panel, relays, power Paise Fifty Nine Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(m) One wire 120.00 sq. mm

173 20.00 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI Mtr. 58.58 Rupees Fifty Eight Paise

marked copper wires of following size to be erected as directed. Fifty Eight Only

(e) 1.50 Sq.mm 3 core round PVC sheathed

174 4942.00 Supplying & erecting approved make LAN cable of following size in existing pipe as per Mtr. 47.47 Rupees Fourty Seven Paise

direction Fourty Seven Only

175 221.00 Providing & erecting Switch board for Computer or electric apparatus consisting of Ea. 1133.22 Rupees One Thousand One

following modular type accessories mounted with PVC / Metallic concealed/open box with Hundred Thirty Three Paise

single mounting base frame covered with textured/metallic /white front plate,modules Twenty Two Only

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

176 9.00 Decorative call bell Ting-tong box type 250 volts complete erected Ea. 71.71 Rupees Seventy One Paise

Seventy One Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

177 79.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt Ea. 535.30 Rupees Five Hundred

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Thirty Five Paise Thirty

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & Only

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

178 55.00 Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, Ea. 112.11 Rupees One Hundred

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, Twelve Paise Eleven Only

mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

179 318.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt Ea. 589.84 Rupees Five Hundred

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Eighty Nine Paise Eighty

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high Four Only

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 kV

180 10.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 7186.15 Rupees Seven Thousand

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w One Hundred Eighty Six

and corrosion free High pressure die cast aluminum housing with smooth finish powder Paise Fifteen Only

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(B) Flood Light (IP-65), Surge protection -4kV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(v) 120 - 159 watts Cat-lll

181 1.00 Providing and erecting Approved make Earth fault Relay suitable to mount with inter Ea. 5956.98 Rupees Five Thousand

connection suitable to following size of moulded case circuit breaker having CT ratio & Nine Hundred Fifty Six

MCCB rating as following along with shunt trip 220V AC. with all internal connections & Paise Ninety Eight Only

complete erected in existing M.S.housing..

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

182 18.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 6790.23 Rupees Six Thousand

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. Seven Hundred Ninety

with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all Paise Twenty Three Only

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only

183 5.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 8861.74 Rupees Eight Thousand

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed Eight Hundred Sixty One

thermal & magnetic release suitable to work on A.C.supply 50 Hz. with all internal Paise Seventy Four Only

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

184 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 23041.13 Rupees Twenty Three

breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A. Thousand Fourty One Paise

with variable thermal & magnetic release suitable to work on A.C.supply 50 Hz. with all Thirteen Only

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only Cat III

185 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 25345.24 Rupees Twenty Five

breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A. Thousand Three Hundred

with variable thermal & magnetic release suitable to work on A.C.supply 50 Hz. with all Fourty Five Paise Twenty

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. Four Only

ICS=100% of ICU only Cat III

Added 10% For Enclosure

186 1.00 Supplying & erecting approved make Four Pole 415V change over switch interior for panel Ea. 2611.86 Rupees Two Thousand Six

mounting with operating mechanism A.C.23 duty confirming to IS for Hundred Eleven Paise

(A)32-40A Cat-lll Eighty Six Only

187 0.50 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars Rn.Mtr 1961.42 Rupees One Thousand Nine

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Hundred Sixty One Paise

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for Fourty Two Only

phase sequence of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

(A) Suitable for 100 Amp. Capacity

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

188 1.60 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars Rn.Mtr 3202.71 Rupees Three Thousand

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Two Hundred Two Paise

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for Seventy One Only

phase sequence of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

(B) Suitable for 200 Amp. capacity

189 1.00 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars Rn.Mtr 4909.61 Rupees Four Thousand

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Nine Hundred Nine Paise

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for Sixty One Only

phase sequence of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

(C) Suitable for 300 Amp. capacity

190 10.00 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having Ea. 297.95 Rupees Two Hundred

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Ninety Seven Paise Ninety

Mark Cat.III Five Only

191 288.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate Ea. 123.22 Rupees One Hundred

on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. Twenty Three Paise Twenty

confirming to IS 8828/1996 with ISI Mark Two Only

192 50.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Ea. 362.59 Rupees Three Hundred

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having Sixty Two Paise Fifty Nine

following capacity Only

(B) 40 Amp. Cat.III

193 3.00 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having Ea. 702.96 Rupees Seven Hundred

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Two Paise Ninety Six Only

(b)40 Amp. Cat.III

194 21.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) Ea. 736.29 Rupees Seven Hundred

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Thirty Six Paise Twenty

capacity Nine Only

(b)40 Amp. Cat.III

195 3.00 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. Ea. 176.75 Rupees One Hundred

Seventy Six Paise Seventy

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

196 12.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface Ea. 3874.36 Rupees Three Thousand

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Eight Hundred Seventy

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be Four Paise Thirty Six Only

used of same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

(b) sheet steel double door

197 3.00 providing and erecting Approved make RCCBs conforming to IS: 12640 and having Ea. 2166.45 Rupees Two Thousand One

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Hundred Sixty Six Paise

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with Fourty Five Only

all advance feature & do not incorporate any electronic component. for following Max.

rating erected as directed

198 36.00 providing and erecting Approved make RCCBs conforming to IS: 12640 and having Ea. 2458.34 Rupees Two Thousand

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Four Hundred Fifty Eight

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with Paise Thirty Four Only

all advance feature & do not incorporate any electronic component. for following Max.

rating erected as directed

(ii) 40Amps. DP

199 24.00 Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Kg. 794.87 Rupees Seven Hundred

Transformer, LT panel board, Motors etc. using copper clamp. Ninety Four Paise Eighty

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

200 4.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Ea. 4591.46 Rupees Four Thousand Five

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free Hundred Ninety One Paise

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Fourty Six Only

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

201 5.76 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated Sq.Mtr 10468.65 Rupees Ten Thousand Four

indoor type cubical panel board necessary IP-42 and above protection as per approval from Hundred Sixty Eight Paise

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 Sixty Five Only

SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size.

(A) locally fabricated panel board

(i) with 350 mm depth

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

202 120.00 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating Kg. 77.77 Rupees Seventy Seven

proper size of M.S. angles,square,round, flats, bars, channels, sections complete with Paise Seventy Seven Only

cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection

on site as per direction of engineer in charge with necessary grouting, cementing, plastering

& finishing complete.

203 35.00 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Mtr. 846.38 Rupees Eight Hundred

Copper conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing Fourty Six Paise Thirty

trench / pipe at road crossing or floor of following size of cables. Eight Only

(A) 4 core 10 Sq. mm

204 55.00 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Mtr. 264.62 Rupees Two Hundred Sixty

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Four Paise Sixty Two Only

trench / pipe of following size of cables

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

205 45.00 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Mtr. 454.50 Rupees Four Hundred Fifty

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Four Paise Fifty Only

trench / pipe of following size of cables

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

206 70.00 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Mtr. 876.68 Rupees Eight Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Seventy Six Paise Sixty

trench / pipe of following size of cables Eight Only

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

207 210.00 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Mtr. 168.67 Rupees One Hundred Sixty

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Eight Paise Sixty Seven

trench / pipe of following size of cables Only

(C) 4 core 10 Sq. mm

208 105.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr. 74.74 Rupees Seventy Four Paise

laying any size of cable or locating the fault all over the run and back filling the same and Seventy Four Only

making the surface as normal ground.

209 10.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr. 357.54 Rupees Three Hundred

laying any size of cable or locating the fault all over the run and back filling the same and Fifty Seven Paise Fifty Four

making the surface as normal ground. Only

(B) If additional machinery like hammer driller or JCB use [Add]

210 10.00 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the Mtr. 226.24 Rupees Two Hundred

road crossing or on floor with necessary material in an approved manner and making the Twenty Six Paise Twenty

ground as per original. Four Only

(F) 100 mm dia.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

211 52.00 Providing & laying approved make Double walled corrugated pipes (DWC) of Mtr. 73.73 Rupees Seventy Three Paise

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Seventy Three Only

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

(B)63mm outer dia

212 65.00 Providing & laying approved make Double walled corrugated pipes (DWC) of Mtr. 95.95 Rupees Ninety Five Paise

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Ninety Five Only

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

(C))90 mm outer dia

213 4.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC Ea. 38.38 Rupees Thirty Eight Paise

insulated armoured cable complete with out going tails, insulating tape etc for following size Thirty Eight Only

(C) 2 to 4 core 10 Sq. mm

214 2.00 Providing and, fixing heavy duty flange type brass double compression type cable gland Ea. 75.75 Rupees Seventy Five Paise

with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Seventy Five Only

tape etc for following size of cables.

(B) 3 & 1/2 core 35/50 Sq. mm

215 4.00 Providing and, fixing heavy duty flange type brass double compression type cable gland Ea. 103.02 Rupees One Hundred Three

with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Paise Two Only

tape etc for following size of cables.

(C) 3 & 1/2 core 70 Sq. mm

216 2.00 Providing and, fixing heavy duty flange type brass double compression type cable gland Ea. 190.89 Rupees One Hundred

with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Ninety Paise Eighty Nine

tape etc for following size of cables. Only

(F) 3 & 1/2 core 150 Sq. mm

217 4.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 13.13 Rupees Thirteen Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Thirteen Only

brass/cadmium plated nut bolts in an approved manner.

218 2.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 15.15 Rupees Fifteen Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Fifteen Only

brass/cadmium plated nut bolts in an approved manner.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

219 10.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 20.20 Rupees Twenty Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Twenty Only

brass/cadmium plated nut bolts in an approved manner.

220 16.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 25.25 Rupees Twenty Five Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Twenty Five Only

brass/cadmium plated nut bolts in an approved manner.

221 12.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 61.61 Rupees Sixty One Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Sixty One Only

brass/cadmium plated nut bolts in an approved manner.

222 159.00 Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double Ea. 1948.29 Rupees One Thousand Nine

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete Hundred Fourty Eight Paise

having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with Twenty Nine Only

earthing.(Make shall be approved by Engineer in charge))

223 159.00 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod Mtr. 108.07 Rupees One Hundred Eight

erected duly painted for fan complete with proper insulation without leakage and earthing. Paise Seven Only

224 159.00 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up Ea. 108.07 Rupees One Hundred Eight

to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Paise Seven Only

complete erected concealed in Ceiling with necessary finishing.

225 159.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Ea. 18.18 Rupees Eighteen Paise

226 12.00 Supplying & erecting approved make low noise decorative exhaust fan having square frame Ea. Eighteen Only

1366.53 Rupees One Thousand

ABS body with inbuilt lowers & square frame. Three Hundred Sixty Six

200mm with 1350RPM Cat.II Paise Fifty Three Only

227 10.00 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- Ea. 524.19 Rupees Five Hundred

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail Twenty Four Paise

for mounting mob & hinged doors as per requirement having locking arrangements with Nineteen Only

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps&

earth bolt of following size of box.

(E) 200mm x 140mm x 125mm [deep]

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

228 1.00 Supplying & erecting approved make Digital time switch having lithium cell 6 years Ea. 3168.37 Rupees Three Thousand

operative and operate battery backup 1 channel day clock with 14 memory programme, One Hundred Sixty Eight

suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup Paise Thirty Seven Only

time 1 minimum & LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as directed.

229 1.00 Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per Ea. 2782.55 Rupees Two Thousand

direction Cat III Seven Hundred Eighty Two

(D) 4 pole 440V 40 Amp. Paise Fifty Five Only

230 1.00 Providing and erecting Inverter based approved make split air-conditioning unit consisting Ea. 52667.46 Rupees Fifty Two

of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary Thousand Six Hundred

compressor with accessories etc. duly connected separately erected evaporating unit and Sixty Seven Paise Fourty

blower motor with its accessories by means of extra supplied proper insulated copper Six Only

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and

15A plug top & Remote Control & MS Stand) with necessary core cutting.

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49)

(B) for 1.5 ton capacity

231 8.00 Supplying and erecting insulated pair of soft copper tubing open or concealed including Rmt 1158.47 Rupees One Thousand One

power and control cable,necessary PVC drain pipes for Split/Cassette AC machine up to 4 Hundred Fifty Eight Paise

TR capacity Fourty Seven Only

232 3.00 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ea. 61482.74 Rupees Sixty One

Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by Thousand Four Hundred

15˚C within a hour, The water cooler should be comprising of hermetically sealed Eighty Two Paise Seventy

compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, Four Only

thermostats, relay etc.complete with necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel and ISI Certified.

233 3.00 Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. Ea. 29187.99 Rupees Twenty Nine

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon Thousand One Hundred

filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon Eighty Seven Paise Ninety

filter auto low & high pressure switches with following size of storage tank & LPH capacity Nine Only

& erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump

234 4.00 Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 Ea. 1275.63 Rupees One Thousand Two

digits LED display, 0 to 750 AC Volts range erected on existing panel board with all Hundred Seventy Five Paise

connection, wiring etc .with manufacturers calibration certificate. Sixty Three Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

235 4.00 Supplying and erecting approved make panel mounting type Digital Ammeter having 3 Ea. 1558.43 Rupees One Thousand Five

digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate Hundred Fifty Eight Paise

on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with Fourty Three Only

manufacturers calibration certificate.

236 8.00 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V Ea. 317.14 Rupees Three Hundred

on existing panel board with necessary connections. Seventeen Paise Fourteen

237 12.00 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 Ea. 274.72 Rupees Two Hundred

VA burden erected in existing CRCA box duly secured with insulating materials connected Seventy Four Paise Seventy

to the meter Two Only

238 12.00 Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, Ea. 43.43 Rupees Fourty Three Paise

complete erected with necessary connections. Fourty Three Only

239 2.00 Providing & erecting open well horizontal mono block pump set with cast iron body, Ea. 20621.17 Rupees Twenty Thousand

complete for three phase submersible motor having Six Hundred Twenty One

[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to Paise Seventeen Only

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe

240 2.00 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made Ea. 7722.46 Rupees Seven Thousand

from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors Seven Hundred Twenty

and locking, arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) Two Paise Fourty Six Only

main fuses, single phasing preventer, indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or BCH make only.

(A) DOL up to 5.0 H.P.

241 2.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Per Job 856.48 Rupees Eight Hundred Fifty

Nos. and size of casing pipes erected by means of proper chain pulley block & pipe Six Paise Fourty Eight Only

wrenches after checking of threads of each pipe with coupling to take the load of the pump

set and pipe assembly filled up with water

(D)For Open well Horizontal submersible pump set for sump well

242 40.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible Mtr. 146.45 Rupees One Hundred

copper cable approved make of following Size. Fourty Six Paise Fourty

(C) 3 Core x 4 Sq. mm Five Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

243 6.00 Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using Ea. 189.88 Rupees One Hundred

insulating material, water proofing material, & making the joint complete. Eighty Nine Paise Eighty

(A) Up to 10Sq. mm Eight Only

244 20.00 Supplying of following size of HEAVY UPVC column pipe with coupler and wire lock RMT. 359.56 Rupees Three Hundred

[B] 50 mm dia Fifty Nine Paise Fifty Six

245 2.00 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long, pump Per Set 1489.75 Rupees One Thousand Four

guard set, starter pipe Rubber ring for submersible pump & UPVC column pipe as directed Hundred Eighty Nine Paise

by Engineer - in - charge with necessary plumbing as desired. Seventy Five Only

246 2.00 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm Ea. 9416.23 Rupees Nine Thousand

long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse Four Hundred Sixteen Paise

current withstand test: 100 kA of 10/350µs waveform in an accredited Third party Twenty Three Only

laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm

long- Cold Galvanized

247 140.00 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per Mtr. 299.97 Rupees Two Hundred

IEC 62561- 2 conducted in the Govt. accredited thirty party laboratory to meet the Ninety Nine Paise Ninety

requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding clamp at Seven Only

every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor,

Expansion piece with connectors at every 20 mtr distance, Aluminium straight Splicer to

connect conductors. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for

conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of

10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in

the Govt. accredited Third party laboratory to meet the requirements of IS/IEC

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

248 2.00 SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and Mtr. 728.21 Rupees Seven Hundred

use exclusively for lightning protection (Vertical Riser/Down Conductor which shall be Twenty Eight Paise Twenty

concealed in Column OR Flushed on) to meet the requirement of IS IEC 62305 With One Only

Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm dia tail connector

used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For

Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross

Connector to connect Earth fixing point to vertical raiser/Down conductor, SS Straight

Splicer at every 4 Mtr to connect MS conductor in column, Bonding /Rebar Clamp at every

3 mtr suitable for interconnecting round conductor with reinforcement inside the concrete

for structural earthing system, SS connector -To connect external conductor 8- 10 mm with

earth fixing point. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for

conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of

10/350µs waveform(Ageing & Electrical test )

conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to

meet the requirements of IS/IEC

249 2.00 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground Mtr. 154.53 Rupees One Hundred Fifty

as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used Four Paise Fifty Three Only

exclusively for lightning protection earthing system and ring equipotential bonding.

250 2.00 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 Per Set 5992.33 Rupees Five Thousand

micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as Nine Hundred Ninety Two

per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided Paise Thirty Three Only

clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber

with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

251 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With

Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR

Coated), High efficency and positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 19.5%-22%, Normal operating temperature 45'C, Junction Box with

Waterproof IP67 & MC4 Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules, Thep. temp. co-efficient of the PV

module shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg)

With 10 year Product warranty. Modules must be complied to the DCR(Domestic content

requirements). The Ration of AC to DC is 5:6 for the Installation capacity which are given

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% - 98.9%,

O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi:

<3%, Operating Tempreture Range: -25~60°C, Integrated protection of Inverter are Anti-

islanding Protection, Input Reverse Polarity Protection, Insulation Resistor Detection,

Ground fault protection, Residual Current Monitoring Unit, Output Over Current

Protection, Output Short Circuit Protection, Output Over Voltage Protection, PV array

string fault Protection. Protection Degree: IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

45.00 Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor Detection PER KW 42156.39 Rupees Fourty Two

Integrated, Residual Current Monitoring Unit Integrated, Output Over Current Protection Thousand One Hundred

Integrated, Output Short Circuit Protection Integrated, Output Over Voltage Protection Fifty Six Paise Thirty Nine

Integrated, Protection Degree: IP65, User Interface LCD & APP,Datalogger & Only

Communication: GPRS / Wi-Fi, Module Mounting Structure: The mounting (Rectangular

pipe / square pipe / circular pipe) with requisite cross bars, nuts and bolts, etc. shall be Hot

deep galvanized with minimum 80micron coating. The Rectangular / square /circular

hollow pipe section used for the structure should have a minimum thickness of 2.0 mm.

other than above, the material thickness should be minimum 2.5 mm. A certificate of a

structural engineer certifying the strength and stability of the mounting structure to

withstand the weight and wind speed of 150 km/hour , shall be submitted by the vendors.

Hot Dipped Galvanized steel coils. suitable arrangement for base plate for foundation , solar

panel mounting, the structure should be suitable for carry the load of solar panel,wiring,

sprinkler system etc. with necessary foundation work/wall mount, j bolt, anchor fastner etc.

the nut bolt used for installtion of stucture should be (SS 304) quality.The ground clearance

of the bottom most edge of solar panel shall not be less than 300 mm to 1200 mm or as per

site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of System

with necessary Swichgears (Suitabel size and protection of ACDB & DCDB), inter

connecting wiring, earthing system as per the CEIG drawing approval,

(D) Grid Tied Solar Power System: 26 - 50 kW (3 - phase)

252 1.00 Supplying, Erecting, Testing & Commissioning the passenger lift having following main Ea. 1474779.78 Rupees Fourteen Lakh

features: Seventy Four Thousand

8 / 10 Passengers, Ground plus 2 upper floor with Rated Speed of 1.0 m/sec., Seven Hundred Seventy

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Nine Paise Seventy Eight

(A) GENERAL DESCRIPTION OF LIFTS.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase

V A. C. Permanent Magnet Synchronous motor of proper rating with high efficiency shall

be used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder

feedback closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/

Down Contactor with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain the impact load

cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of

sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with

LED ceiling lights. Car flooring shall be of s/s 304 chaker plate design suggested of

engineer in charge. of engineer in charge. Car doors shall be of stainless steel grade

hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S.

304 finished with emergency stop device, mechanical door safety device, facility of auto/

attended mode. All car panel buttons and all floor switches must be with brail language as

[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/

telescopic opening made of hairline finish steel grade of 304 with key holes and infrared

curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be

provided. Also, Emergency Light & Fan should start immediately without any Time Delay

as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator

shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity

with Manual Rescue Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that

doors kept open till excess load is removed.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in

[14] Mechanical over speed governor with governor calibration as per actual site parameters

and submission of calibration certificate submission, door key holes in the floor doors,

fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift

pit should be provided by the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever

required as / if directed by engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage

Under Voltage protection and THD eliminator in circuit for lift machine room and lift well

with proper numbers of light points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall be made available by department

in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble

fixing around all landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for

obtaining all necessary permission from lift inspector and other authorities. [20] acrylic

transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and provide report by

third party authorized by concern licensing authority 5.agency has to provide third party

insurance up to completion of free maintenance period and submit the document for the

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[21] Car Panel Operating Buttons at an accessible height from wheelchair for handicapped

person and raised numbers with brail mark with floor position indicator/buttons must be of

Auto Glow type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade

of 304 should be provided at appropriate 900mm height on the Rear & Side Wall Panels in

Lift Car. [23] With Necessary kVA rating voltage controlled Stabilizer suitable for your

controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which

rating is sugested by CEICED Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial

Communication mode including Regenerative power efficient operation,on site

programming facility, Anti nuisance, Pte-opening, BMS/RMS with necessary online real

time monitoring system having necessary connectivity for remote monitoring & other

suitable supporting hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and

hall lantern & TFT Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb

for car and all Doors, All landing doors must have fire rating up to 2 hours and car door

must have multi-level crisscross beam door protection.

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and

Each elevator are equipped with remote monitoring system.agency has to provide mobile

app and user id and password for monitoring

Amount in Words :

Rupees Six Crore Fourty Five Lakh Seventy Eight Thousand One Hundred Ninety One Paise Sixty Five Only

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] GST and Income tax TDS will be deducted at a source while making payments of bills

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Deputy Executive Engineer Executive Engineer

Electrical (R & B) Sub Division R & B Sub Division R & B Division

Morbi Morbi Morbi