Construction of Educational Hub at Pinarayi Kannur

Amount

2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.34.1 : Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock

2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

2.28.1 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

2.35.1.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos /Lindane E.C. 20% with 1% concentration

2.35.4.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement :2 coarse sand ) to the full depth of the hole:With Chlorpyriphos /Lindane E.C 20% with 1% concentration

4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

OD : Applying a coat of Inertol Poxitar Coal tar epoxy coating per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

4.19.1.2 : Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in-charge. Note : 1) Excess/less cement used than specified in this item is payable/recoverable separately. 2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS: 456. Uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of IS : 456-2000 in the items of BMC and RMC.M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)

OD : Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note:- Cement content considered in this item is @ 350 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level.

OD : Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note:- Cement content considered in this item is @ 350 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

5.11.1 : Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

5.35 : Add for using extra cement in the items of design mix over and above the specified cement content therein

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level

16.75 : Providing and laying C.C pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering processand finally finished by floating brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge ( The panel shuttering work shall be paid for separately

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)

22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against anyleakage.For vertical surface two coats @0.70 kg per sqm

OD : Providing & laying vacuum dewatered flooring using M20 grade Concrete 1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) including vibrating concrete by using screed vibrator and vacuum dewatering using approved make equipment and finishing the top surface to required level and grade using power trowels of standard make. Rate to include for Surface Hardener 400ml per 50kg bag of cement, covering the finished concrete surface and curing

OD : Supplying and fixing cast iron light duty (100kg) manhole covers of size 600x600mm

OD : Supplying and fixing ductile iron heavy duty(105kg) manhole covers of size 600x600 mm

OD : Supply and fixing of 600x600mm DI Medium Duty Manhole Cover (B 125) of approved quality

OD : Supply and fixing of 600x600mm DI Heavy Duty Manhole Cover (C-250) of approved quality

OD : Supply and fixing of 900x600mm DI Medium Duty Manhole Cover (B-125) of approved quality

OD : Supply and fixing of 900x600mm DI Heavy Duty Manhole Cover (C-250) of approved quality

OD : Supply and fixing of 300x300mm Light Duty DI Grating(A-15) with frame of approved quality

OD : Supply and fixing of 450x450mm Light Duty DI Grating(A-15) with frame of approved quality

OD : Supply and fixing of 535x403mm Kerb Drain with frame of approved quality

OD : Drilling of perfectly vertical bore hole of a diameter suitable to receive 7" diameter casing pipe up to desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of P.V.C. casing pipe 10kgf/cm2 inside the bore hole including all pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.

OD : Supplying & laying 20mm thickness standard Protection board @ density 45kg/cum-fixing on over the HDPE Membrane layer - before soil back filling. , before laying should be inspect hdpe membrane surface for pancher of if any. Rate including labour charges.

OD : Providing and installation of Pre PSA -HDPE Membrane over the Retaining wall with including necessary over lapping and including required termination detailing as per site condition. Membrane laying into shutter gape with proper fixing Or perimeter wall as per the freeze Drawings accordingly. the manufacturers instructions/specifications are to be followed. and Supplying laying 20mm thickness standard Protection board @ density 45kg/cum-fixing on over the HDPE Membrane layer - before soilback filling. , before laying should be inspect hdpe membrane surface for pancher of if any Rate including labour charges.

OD : Providing and spreading Ready mix surface non-metallic floor hardening compound (Nitoflor Hardtop standard of FOSROC Ltd or SIKA CHAPDUR) over the laid concrete at the rate of minimum 3.5kg/Sqm to be spread at the rate of 2Kgs and 1.5 Kgs in two operations , inclusive power trowelling for quick and making smooth levelled surface etc.,all as per manufacturers' specifications.

OD : Supply and Application of 3mm thick industrial Epoxy (Pulastic sports floor Sika or equivalant) for flooring as per specification; All floor cracks to grout. Uneven floor to be grinded and made even gradient. Surface preparation – The entire surface shall be bethoroughly levelled, cleaned and made dust free, followed removal of all existing sealants and fill all construction joints using epoxy mortar. Epoxy primer 100 microns - An epoxy primer shall be applied

OD : Providing grooves of size 6 mm wide and 15 mm deep on concrete floor on both direction, grooves made by groove cutting machine with diamond cutting wheel and filling of the grooves with Epoxy urethane.(Nitoflor 280 of FOSROC Ltd or Equivalent.)

50.2.3.1 : Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

50.6.3.1 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete

50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

50.6.7.1 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

OD :Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

6.38 : Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

OD : Exposed brick work with Baliapattam or similar bricks of size 200 X 95 X 65 mm or nearest in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). Above plinth level and up to floor V level. Basic prize of the brick is Rs.22/-

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.6.2.3 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

6.9 : Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular)bricks of (non modular bricks of class designation 7.5 in cement mortar 1:3 (1cement: 3 coarse sand)

19.4.2.1 : 150x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

7.6.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing masonry open duct as required.Upto 35 sq. mm

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

60.7.2 : DR packing Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bedof cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete.

9.70.1 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:125x64x1.90 mm

21.1.1.3 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )

21.1.2.3 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)

21.3.3 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

OD : Supplying fully finished Pre Hung Door both side laminate vertical pattern Flush door with PVC foil Wrapped WPC jamb with one side 65mm Architrave and other side tacker.Door 35 mm thickness.4 side PVC Lipping,Lock Hole Boring,Hinge cutting (4Nos),SC Core filling .Jamb width100mm. size:2350x900x35mm

OD : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): With toughened glass panes of 8 mm thickness

OD : Applying Antitermite treatment on flooring using emidoclocrid chemical which is ecofriendly and nil harmful for human beings and pet animals which control the pests including all cost and labour charges etc complete

OD : Providing and fixing glazing in aluminum door, window ventilator shutters and partition etc. with EPDM rubber/neoprene gasket etc. Complete as per the Architectural drawings and the direction of Engineer in charge for Air conditioned room ( cost of aluminium snap beading shall be paid in basic item): with float glass panes of 6 mm thickness with maximum u factor - 3.8w/m2c and maximum SHGC of 0.59

OD : Cladding with Brick using Baliapattam or similar bricks of size 5cm thick in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand)(from floor 2 level up to floor 5 level)

OD : Brick work in gauged arches in superstructure above plinth level and upto floor five level in cement mortar 1:3 (1 cement : 3 coarse sand) including centering and shuttering complete, for span up to 6 meters with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

OD : Brick work in gauged arches in superstructure above plinth level and upto floor five level in cement mortar 1:3 (1 cement : 3 coarse sand) including centering and shuttering complete, for span up to 6 meters with Baliapattam or similar bricks of size 200x95x65mm

OD : Providing and fixing fibre glass mesh of 145 GSM including cost and conveyance of all material and labour charge etc complete.

21.15.3 : Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Polyester powder coated minimum thickness 50 micron aluminium

21.11.3 : Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-Charge complete.355 x 19 mm

21.8.1 : Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Upto 5 mm depth and 5 mm width

26.24.1 : Providing and fixing in position wall panelling at all heights with integraldensified calcium silicate panels/tiles of size 595 x 595mm, having NRC (NoiseReduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectanceof 85% (minimum). Non combustible as per BS:476 (part-4), fire performanceas per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e.vertical studs ofsize 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceilingchannel section of size 50 x 32m fixed to the floor and soffit at 600mm centersusing 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with10mm bolt. This same channel is then to be fixed in horiziontal direction at600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of50mm thickness is then to be inserted in the slots and finally calcium silicatenon combustible panels/tiles are to be screw fixed with self tapping pan headnickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving aneven groove of 1 mm between the panels. The joints between the panels are tobe duly jointed and finished using recommended jointing calcium silicate basedcompound and fiber joint tape roll 50mm wide (90 metre )roll and two coats ofprimer suitable for panelling as per manufacturer's specification as perdirection of Engineer-in-Charge all complete.With 15 mm thick fully perforated square/butt edge light weight calcium silicatepanels/ tiles

26.26.2 : Providing & fixing false ceiling at all heights with GRG (Glass Fibre ReinforcedGypsum) false ceiling tiles of Size 595x595 mm of approved texture, designand patterns having moisture content less than 2%, humidity resistance of99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476(part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontallevel suspended on inter- locking metal T-Grid of hot dipped galvanised ironsection of 0.33mm thick (galvanized @ 120 grams per sqm including bothsides) comprising of main-T runners of size 15x32 mm of length 3000 mm,cross - T of size 15x32 mm of length 1200 mm and secondary intermediatecross-T of size 15x32 mm of length 600mm to form grid module of size 600 x600 mm, suspended from ceiling using galvanised mild steel items (galvanizing@ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners,6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape leveladjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition withthe help of plastic rawl plugs at 450 mm center to center and 40 mm long drywall wood screws. The work shall be carried out as per specifications, drawingand as per directions of the Engineer- in-Charge.With fully perforated 12 mm thick micro tegular edged or 10 mm thick squareedged GRG false ceiling tiles.

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

10.26.1 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube

13.16.1 : 6 mm cement plaster OF MIX 1:3 (1 Cement: 3 fine sand)

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

16.92 : Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10 mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge

OD : Providing and fixing 60x30x2 cm Granite stone block (Sadarhally) flamed surface on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10 mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge

OD : Providing and fixing 60x60x3.8/45x45x3.8/30x30x3.8cm Granite stone block (S WHITE) Flamed surface on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints filled withsame mortar including ruled pointing etc. complete as per direction of engineerin- charge.

16.78.2 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBRValue-25

16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

22.6 : Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)

22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

11.26.1 : Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick

11.41.4 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1000x1000 mm

11.47.4 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 1000x1000 mm

11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

11.48.4 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 1000x1000 mm

OD : Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

OD : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness., including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1200x2400 mm

OD : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand &amp; manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x1200 mm

OD : Providing and fixing Round edge beading/ corner beading from approved manufacture of PVCU and PVC thickness 1.2mm with depth and profile as approved made of co-extrusion fixed by placing the beading on edge of tile surface with side without punched holes butting the surface and lay the tiles on other surface by allowing mortar filling and ensure that mortar penetrates the adhesive holes complete as per manufacturers specifications

OD : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.

OD : Providing and laying gang saw cut 18 mm thick, leather polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 16.86.1 With granite stone of area less than 0.50 sqm.

OD : Providing and fixing 18 mm thick gang saw cut, leather polished, premoulded and prepolished, machine cut granite stones of required size and shape, approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm

OD : Providing and fixing 18 mm thick gang saw cut, leather finished granite slab machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm

5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.

OD : Providing water cutting to bottom edge side of slab/sunshade by 25mm wide and 15mm thick in cement mortar 1:3 including cost and conveyance of all materials, labour charges etc complete

OD : Providing water cutting to construction joints by 25mm wide and 15mm thick in cement mortar 1:3 including cost and conveyance of all materials, labour charges etc complete

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

10.7 : Providing and fixing ball bearing for rolling shutters.

OD : Exposed Brick work with Baliapattam or similar bricks of size 200x95x65mm or nearest exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1cement : 6 coarse sand). Up to plinth level

OD : Applying two coat of clear coat on Exposed brick surface and including all cost and conveyance of all materials and labour charges etc. complete.

OD : Providing and fixing 50 mm thick pre-fabricated PUF sandwich panel (size, shape and colour as approved by Engineer-in-charge) including all cost of conveyance and labour charges etc as specified and as directed by the Engineer-in-Charge. The thickness of upper skin is 0.5 mm and thickness of lower skin 0.5mm with PPGI, Fy 245 mpa, 120 GSM confirming to IS 14246; 2013. The sheet shall be fixed using self drilling/self tapping screws and excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

OD :Providing and fixing Galvalume sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness of approved quality and make, epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridges plain (500-600 mm)

OD : Providing and fixing 220mm standard width PVC rain water Gutter Pipe with clamb and all necessary accessories required for supporting to the wall including cost of labour and making necessary connections with rain water pipes as specified and as directed by the Engineer- inCharge.

OD : Providing and fixing Toilet Cubicle (of following standard dimension which includes 600 mm door size width) made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12 mm thick solid compact laminate panels Finish of the compact laminate should be raw silk which include doors, pilasters and intermediate panels finished with approved texture/shade as per the detail drawing and as per IS 2046 (Indian Standard) and as per fire retardant BS-476/9 standard.This also includes providing and fixing in position necessary hardware made out of Stainless;Steel (Grade 316) as per manufacturer&apos;s specifications and EIC instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U- Channels, (6) SSShoe Box Plate, (7) MS-Base Plate, (8) Rubber noise deafening tape, (9) Screws and wall Plugs.

OD : Providing and laying Leather finish (Temple finish) Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with base of cement mortar 1:4 (1 cement : 4 coarse sand). 25 mm thick

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

OD : Cast iron work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

OD : Toughened Glass Partition with patch fittings : Providing and fixing 12mm thick Toughened glass laminated(Saint Gobain) Partition System with SS Patch Fittings(Dorma /Equivalent) as per design intent. Including all cost and conveyance of materials, labour etc complete.

OD : Toughened Glass Double leaf Door Providing and fixing door of 12mm thick Toughened laminated glass door (Saint Gobain) with dorma (Crown) patch fittings(Floor Spring, Top patch, pivot Pin, Bottom patch, Corner lock, Handle. Including all cost and conveyance of materials, labour etc complete. Details for 3.15 Sqm

OD : Providing and fixing Laminated glass of approved quality of 13.52mm overall thickness with 1.52mm thick polyvinyl butyl sandwiched between 2 layers of toughened glass of thickness 6 on each. The glass shall be fixed with necessary structural & weather silicon sealent of approved colour. Only the glass area provided shall be considered for the measurement. Item rate shall include , laminated glass, silicon sealants and all necessary accessories including flashing except MS framing work. MS framing work shall be measured in separate relevant item. Complete all including labour, Material, Tools, Equipments, Levies, and Scaffolding as directed by the Engineer- in-charge

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD : Providing and fixing curtain wall using IRS: M 41-97- grade weathered corrosion resistant steel 6mm thick steel plate including fixing it on steel tubular section frame (the cost of the frame should be paid separately) including CNC cutting as per drawing and design, corten steel texture of approved material including all cost of materials etc. complete

OD : Supplying ferrocement planter box with 60x45x45 outer dimensions of approved design

11.55.1 : Providing and laying flamed finish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all completeas per the architectural drawings with 18 mm thick stone slab over 20 mm(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid andjointed with cement slurry and pointing with white cement slurry admixed withpigment of matching shade including rubbing, curing and polishing etc. allcomplete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

26.22.1 : Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.

12.52.1 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending

OD : Providing and fixing VOX Infratop ceilings in comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to centerin a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be added in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels.The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer’s specification as per direction of Engineer-in- Charge all complete

OD : Providing & fixing Poly carbonate plain sheet / solid sheet 3mm or 4 mm thick asapproved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by theEngineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) withEPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost ofpurlins, rafters, trusses and including cutting to size and shapes where ever required.

OD : Providing &amp; fixing 12 mm thick Toughened laminate Glass Works with required fitting as per the design and drawing , including 3M double side gum tape silicon etc complete , cost and conveyance of all materials, labour charges, etc., complete. Max. V factor - 7.71 w/m2c and Max. SHGC - 0.4

8.10.2 : Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.Granite Stone of approved shade

9.2 : Providing laminated veneer lumber conforming to IS: 14616 and TAD - 15:2001 ( Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)

9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

9.6.3 : Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B), including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, all complete as per directions of Engineer-in-Charge and panelling with panels of:12 mm thick one side Pre- laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - I medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-I conforming to IS : 3087 bonded with BWP types synthetic resin adhesive as per IS : 848 and pre - laminated conforming to IS : 12823 Grade - I, Type II marked:

9.71.1 : Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete:125x64x2.50 mm

9.165.1: Providing and fixing bright /matt finished Stainless Steel handles of approved quality make with necessary screws etc all complete.125 mm

OD : Providing and fixing Stainless Steel universal hydraulic door closer ,with double speed adjustment with necessary accessories and screws etc. complete.

OD : Providing and fixing SS door stopper with necessary screws etc. complete

OD : Providing and fixing Stainless steel heavy duty 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

9.74.1 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm

OD : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete. On concrete work

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as permanufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete.<br>On steel work

9.117.1 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm

9.118.1 : Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).

9.147B : Providing and fixing factory made uPVC white colourfixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where everrequired) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanizedmildsteel sectionmade from roll forming process of required length (shape &size according to uPVC profile), , uPVC extruded glazing beads of appropriatedimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finishedwall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frameand adjacent finished wall shall be filled with weather proof silicon sealant overbacker rod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in- Charge. (Single / double glass panes andsilicon sealant shall be paid separately).<br>Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead ofappropriate dimension. (Area upto 0.75 sqm.)

22.26 : Providing and applying of swellable type water stop tape, 19mm x 25mm thick inlinear meter (expansive nature) for construction joints treatment of RCC structuresuch as raft slab, retaining walls, water storage tank and at the junctions of raftslab with the retaining walls etc.. After cleaning the surface, one coat of requiredprimer for swellable water stop tape shall be applied throughout the length of thejoint @3.78 litre per 240 running meter. Over the primed surface swellable typewater stop tape shall be placed. The work shall be carried out all complete as perspecification and the direction of the engineer-in-charge. The product performanceshall carry guarantee for 10 years against any leakage.

OD : Providing and applying integral crystalline slurry of hydrous in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm

30.2.2 : Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.3 : Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

30.2.4.3 : Screened through sieve of I.S. designation 4.75 mm

30.2.8 : Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-incharge (cost of sludge, dump manure and/ or good earth to be paid separately).

30.2.9 : Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-incharge

30.2.4.1 : Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm

30.2.4.3 : Screened through sieve of I.S. designation 4.75 mm

30.2.9 : Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in- charge

30.2.8 : Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in- charge (cost of sludge, dump manure and/ or good earth to be paid separately).

30.2.56 : Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.

30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler

OD : Providing and laying of compacted fill 50mm thick with 10mm to a downgraded metal (Coarse rubble granite Stone) combined to form a contour and elevations to the desired level as per Drawings

OD : Providing and laying of compacted 100mm thick with 20mm to a downgraded metal (Coarse rubble granite Stone) combined to form a contour and elevations to the desired level as per Drawings

OD : Providing and laying of compacted 100mm thick with 40mm metal (Coarse Rubble Granite Stone) combined with a downgraded stone up to 30mm to form a contour and elevations to the desired level as per Drawings

OD : Design, Supply, Installation of Pop up Sprinkler Automation Irrigation works for Football field including pipe works, sprinklers & accessories, valves & accessories, Filtration & Pumping units, control panels, automation equipment etc all materials required for sprinkler system.

16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

OD : Grass pavers : Providing and laying Grass Pavers(30x30x120mm) (Basant Betons or equivalent), over a setting bed(separately provided). Pavers are to be packed in sand by brushing and brooming in sand into the joints,consolidated by repeated watering and using a vibrating compactor in levels as per design

OD : Grassing with buffalo grass including watering and maintanence of the lawn till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, in rows 5cm apart in both directions. (watering & maintanance till the completion of project work and handing over to client)

OD : Supplying, laying machine cut, surface grinded, levelled and rough granite cobble stone varying size and thickness 6cm to 8cm laid in stone chipping 6mm grade 7cm thickness correct line and level including cutting joints neatly ,cost and conveyance of all materials and labour charges etc. complete

OD : Supply and fixing of flamed finished 30 mm thick Sadarhalli granite on 1:4 cement slurry and pointing with approved color grout as per landscape architect's direction cost including all materials to site, all labour charges and other necessary charges to complete

OD : Providing edge moulding to 30 mm thick sadarhali/Granite stone including machine polishing to edge to give gloss finish etc. complete as per design approved by the engineer in charge

OD : Providing and laying rough finish granite stone (sadarhalli) flooring in required design and pattern (90x50 cm or nearest)in linear as well as curvillenear all complete as per the architrctural drawing with 50mm thick stone slab over 50mm thick base of sand etc.complete as specified and as directed by the engineer in charge

OD : Supplying and planting of approved Hedge Plants at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (4)Ixora noragrant

OD : Supplying and planting of approved trees species of a height 2.0m to 2.5m, at the specified location as shown in the drawing.Rate shall include Cost of plants, soil work inclusive of red soil, sand and manure mix staking and planting of trees sapling, replacement of dead trees and for providing a pit size 75 x 75 x 75 cm and maintainance till the competion of project work.( 1).Plumeria Alba

OD: Supplying and planting of approved shrubs at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (9)Oleander tall

OD : Supplying and planting of approved shrubs at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (13)Tabernaemontana green

OD : Supplying and planting of approved shrubs at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (7)Gardenia

OD : Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)

OD : Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment

OD : Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through the sieve of I.S. designation 20 mm

OD : Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in- charge

OD : Supplying and stacking at site Neem Cake from approved source, including carriage upto 5 km lead complete (Neem cake measured in 50 kg gunny bags will be reduced by 1 kg per bag for payment

OD : Providing and stacking of trees (Ailanthus excelsea) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Alstonia scholaris) with multi branches, disease free, healthy in big polybags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Anthocephalus cadamba) with multi branches, disease free, healthy inbig poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Bohunea verigated) with multi branches, disease free, healthy in big polybags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Dilburgea sisso) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Mangifera indica) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Azadiracta indica) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Legestromea floregene) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Terminalia katappa) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Cassia fistula) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Ficus relegiosa) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Schleichera trijugata) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Mimosoaps elkengi) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Phylanthus emblica) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Psidium gujava) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Ficus bangalanses) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Deolinix regea) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Ficus banchamina) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Ficus elastic) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Bamboosa vulgaris) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Raphis humilis) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Aglonima modestum) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Hyminocallis) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Spathephyllum) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Dresena trafasciata) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Dypsys lutensis) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Philodendrum xanadu) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Taberna monthana) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Ixora coccenea) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Heliconium psitachorum) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Ophiopogon juburan) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.

OD : Providing and stacking of trees (Combrettum indicum) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees (Sterlitzia regenea) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.<br>

OD : Providing and stacking of trees (Calathea orbifolia mix) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge

OD : Providing and stacking of trees(Chameorops humilis) with multi branches, disease free, healthy in big poly bags of size 30 cm with a girth of 10 cm as per direction of the officer-in-charge.<br>

OD : Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable<br>material’s as per direction of officer in charge (excluding cost of plant & water)

OD : Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)

OD : Complete maintenance of trees & Shrubs for 6 months (Outside garden features), jobs like making of basin at regular interval i/c watering, weed free site & pruning and replacing the dead trees with same specification and height as per direction of officer in charge. Water arrangements to the plantation site need to be done by Contractor.

OD : Supply, Fixing & Commissioning of flexible,kink resistant 16mm Blank tubing and resistance to UV damage and algae growth brown in colour and wall thickness 1.2mm, pressure rating 0.58 to 4.1Bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply, Fixing & Commissioning of Xeri bug emitter pressure compensating with self flushing emitter, and selfpiercing barbs,flow rates 1 GPH UV resistant colour coded with working pressure 1.0 to 3.5bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 3" Large Capacity Disc Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar), Maximum Temperature Up to 140ºF (60ºC).

OD : Supply,Fixing & commissioning of 21/2" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 63mm Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 40mm Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 32mm Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 25mm Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge

OD : Supply,Fixing & commissioning of 20mm Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of self-closing flushing valves that are installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water.

OD : Supply, Fixing & commissioning of 9 - Gauge Galvanized Steel Rod Comes Sharp tips provide easy installation into all soil types, Staple Distribution Tubing, XF Drip Line or XBS Tubing to Finished Grade. Notched Sides. Corrosion -Resistant of TIE DOWN STAKE etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of Gromatetake off Connects XF Series Drip Line and Blank Tubing to PVC Mainlines at Low Pressures. 16mm GTO

OD : Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - Obtrusive Brown Colored Fittings of 17mm Tee . etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - Obtrusive Brown Colored Fittings of 17mm COUPLING. etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - Obtrusive Brown Colored Fittings of 17mm ELBOW. etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 17mm End cap S Type for dripline closure at the end of the dripline etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of Pop up spray head Spray bodies, with Rotary nozzle having mutilple stream MPR spray having Co-moulded wiper seal is molded into the cap and features an encased plastic 'cage' to provide unmatched resistence to grit, nozzle having capable of covering 5.2-7.2m at 1.4 - 3.8 Bars pressure, True flushing mechanism,Thick streams and large water content & Low precipitation rate and the enviroment. Additionally, the pressure-activated, multi-function seal design assures a positive seal without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic. Pop spray body shall with stand upto 4.8 bar. Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressures.etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly. The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA Series.

OD : Supply,Fixing & commissioning of PVC service saddle of varying size upto 63mm dia with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 75mm with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 40mm. with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 32mm. with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge

OD : Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 25mm. with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge

OD : Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 20mm. with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge

OD : Supply,Fixing & commissioning of a double acting air and vaccum release 1/2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Only for Drip Irrigation etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 18" Jumbo Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 12" Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. PVB/VB

OD : Supply,Fixing & commissioning of 3/4th Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. 3RC

OD : Supply,Fixing & commissioning of 3/4th Key threads into top of QCV to provide water access etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & commissioning of 3/4th Hose Swivel Made up of Solid Brass Swivels up to 360 degrees to allows hose to be pulled in any direction & Also to prevent Hose Damage etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. SH-0

OD : Supply,Fixing & commissioning of Pressure release valve 2" with pressure setting from 0 to 7 Bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply,Fixing & Commissioning of Direct burial14 Awg x 2 Maxi cable with PVC insulated UL stndard 493 with impregnated polyethene jacket and soft annealed tin coated copper confirming to ASTM B-33 for two way communication between decoder controller and decoders complete.

OD : Supplying ,fixing & commissioningdirect bury -on wire Connector with strain relief UL486D Certified with water proof silicon sealent,fits wire from 22ga to 66ga asper specification complete DBRY

OD : Supply,Fixing & Commissoning of ASTM Station Modular Controller UV resistant,wall mount case,with LCD display ,non volatile memory for 100years,10KV surge protectionwith removable front panel and programmable under battery in office,total run time calculator ,short detect errors,one touch watering,wityh contract default programe s,slow closing valve removable battery with sensor terminals Work has to be executed as per the approved drawings and/or as per the directions of the engineer incharge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete

OD : Supply,Fixing & commissioning of 63mm Solenoid globe angle inlet Valves with fabric reinforced Nitrile diaphram Material and rugged PVC durable glass -filled nylon construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @60Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D<

OD : Supply,Fixing & commissioning of Automatic rain shut off Device,latching hinge with multiple rain fall setting 5mm to 20mm UL CUL listed and CE approved RSD BEX

16.78.3 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade - III (size range 26.5 mm to 0.075 mm) having CBR Value - 20

50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc

OD : Laterite masonry with neatly dressed laterite stone of size 70x35x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

OD : Exposed Laterite masonry with neatly dressed laterite stone of size 30X20X20cm or nearest size in cement mortar 1:6 for superstructure above plinth level up to floor two level including all cost<br>of materials, labor charges etc

OD : Providing & fixing on roof pressed clay ceiling tiles (30 x 25) mm size of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately

12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

OD : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

4.3.3 : Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

10.20 : Providing and fixing bolts including nuts and washers complete.

11.46.3 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 800 x 800 mm

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

12.45.2 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum fire resistant board conforming to IS; 2095 - Part I

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

10.8.1 : Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area

12.1.B.1 : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary Soil - Depth upto 3m - Mechanical Means

12.8.A.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

12.8.1.C.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

3.3 : Excavation for road way in soil with Dozer including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.

3.17 : Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.

3.18 : Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

4.2.A.2 : Construction of granular sub-base by providing graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Grading-IV - For lower sub base - Mix in Place Method

4.12 : Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

55.23 : Supplying and laying interlocking tile 80mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.

OD : Supply, installation, testing, pre commissioning and commissioning of 400kVA USS with 11kV/433V indoor cast resin dry type transformer (copper wound) having a continuous rating for 11kV / 433V 3 phase 50 Hz, Vector group Dyn 11 with off-circuit tapping +10% to -10% in steps of 2.5% by tap links, include separate winding temperature indicator for each phase and core in the transformer, emergency off switch housed separately outside. Transformer should have cable end box on HV side suitable for cable termination up to 3Cx 300 sq.mm XLPE 11kV cable and suitable end box on LV side for connecting XLPE insulated PVC cables with all accessories, complete as required as per State electricity board and IE rules specifications. The transformer shall confirm to IS 2066/77, 11171/1985 with latest amendment etc complete with HT HRC fuses and output connected to 11kV seal off bushings to the transformer. Losses shall confirm to latest IS tolerances and as per GRIHA standards. Load break switch as primary protection, HT load break switch fuse unit 630A -1 No. 26.3kA , 630A Aluminium busbar with heat shrinkable insulation and support insulator (SMC / DMC ) - 1set, Earthing switch interlocked with the main switch - 1 No, Mechanical and electrical on / off indication etc.(Civil foundation cost not included)

OD : Supply installation, testing, pre commissioning and commissioning of 160kVA USS with 11kV/433V indoor cast resin dry type transformer (copper wound) having a continuous rating for 11kV / 433V 3 phase 50 Hz, Vector group Dyn 11 with off-circuit tapping +10% to - 10% in steps of 2.5% by tap links, include separate winding temperature indicator for each phase and core in the transformer, emergency off switch housed separately outside. Transformer should have cable end box on HV side suitable for cable termination up to 3Cx300 sq.mm XLPE 11kV cable and suitable end box on LV side for connecting XLPE insulated PVC cables with all accessories, complete as required as per State electricity board and IE rules specifications. The transformer shall confirm to IS 2067/77, 11171/1985 with latest amendment etc complete with HT HRC fuses and output connected to 11kV seal off bushings to the transformer. Losses shall confirm to latest IS tolerances and as per GRIHA standards. Load break switch as primary protection, HT load break switch fuse unit 630A -1 No. 26.3kA , 630A Aluminium busbar with heat shrinkable insulation and support insulator (SMC / DMC ) - 1set, Earthing switch interlocked with the main switch - 1 No, Mechanical and electrical on / off indication etc.(Civil foundation cost not included)

OD : Supply installation, testing, pre commissioning and commissioning of 200kVA USS with 11kV/433V indoor cast resin dry type transformer (copper wound) having a continuous<br>rating for 11kV / 433V 3 phase 50 Hz, Vector group Dyn 11 with off-circuit tapping +10% to -10% in steps of 2.5% by tap<br>links, include separate winding temperature indicator for each phase and core in the transformer, emergency off switch<br>housed separately outside. Transformer should have cable end box on HV side suitable for cable termination up to 3Cx<br>300 sq.mm XLPE 11kV cable and suitable end box on LV side for connecting XLPE insulated PVC cables with all accessories, complete as required as per State electricity board and IE rules specifications. The transformer shall confirm<br>to IS 2067/77, 11171/1985 with latest amendment etc complete with HT HRC fuses and output connected to 11kV seal off bushings to the transformer. Losses shall confirm to latest IS tolerances and as per GRIHA standards. Load break<br>switch as primary protection, HT load break switch fuse unit 630A -1 No. 26.3kA , 630A Aluminium busbar with heat shrinkable insulation and support insulator (SMC / DMC ) - 1set, Earthing switch interlocked with the main switch - 1 No, Mechanical and electrical on / off indication etc.(Civil foundation cost not included)

OD: Supply and installation of emergency OFF push button station with necessary IP 42 Polycarbonate enclosure,accessories and giving connections etc as required.

OD : Supply, Installation, testing & commissioning of 3 phase 4 wire LT TOD meter CL 0.5S, including all necessary accessories for fixing and connection complete as required.

OD : Supply, Installation, testing & commissioning of 3 phase 4 wire Bidirectional HT TOD Net meter according to IS14697- 1999, CBIP-325, IS 159595A, class: 0.2S, TOD meter with RS485 port, LCD with backlit display of Electricity board approved make, in existing enclosures of outdoor metering cubicle/LBSM panel including all necessary accessories for fixing and connection complete as required getting tested and approved from statutory authorities, providing connection/inter-connections as required for complete installation and as instructed by engineer in charge/consultant.

8.4.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm

OD: Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 11KV grade of following sizes as required. 3 core 150sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 11 KV grade of following sizes as required. 3 core 300sqmm

10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm

OD: Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 150 sq. mm

OD : Supply of one number PVC insulated and PVC sheathed /XLPE armoured poer cable of 1.1 KV of 1.1KV grade of following sizes as required. 3C 1.5sqmm

OD : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed /XLPE copper condutor cable of 1.1KV grade as required. 3 x 1.5 sqmm Cu

9.1.8 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 16 sq. mm (25mm)

2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole.

2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia

2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

OD: Supply installation, testing, pre commissioning and commissioning of 400kVA DG set with standard control panel as per technical details given below.i. Engine b. Type of engine: diesel engine c. No of cylinders: suitable to develop the required BHP as per manufacturers standard d.Method of cooling: Water cooling(with radiator)e. Aspiration: Turbocharged after cooled f. Design: Suitable for generator set application g. Output: BHP rating specified by the respective manufacturers capable of delivering the required power for alternator. ii. Standard accessories with diesel engine a. Flywheel housing and flywheel to suit single bearing alternator (close coupled arrangement )b.Air cleaner c.coolant kit d.fuel pump e.fuel filter g.lubricating oil filter h.residential type exhaust silencer. iii. engine instrument panel a.starting switch with key or button b.lubricating oil temperature gauge c.lubricating oil pressure gauge d.water temperature gauge e.RPM indicator with hour meter f.battery charging ammeter. iv. safety controls for engine a. trip for low lubricating oil pressure b. trip for high water temperature c.providing necessary warning system and other safeties as contemplated in relevant ISS d.fuel shunt off facility at over speed.iv. fuel pipe oil-resistant flexible hoses 25 mm dial or nearest size MS pipe as per manufacturers requirement for fuel line extension with regulator valve .v.Alternator: b.type::self exited and self regulated c. capacity :400kVA at 0.8 PF d.system of voltage :3 phase ,415V e. speed :1500rpm f.voltage regulation band :+1.00% of rated voltage g.insulation :class F/H h.AVR: AVR shall be provided with a motorized or solid-state potentiometer i. IP rating of enclosure :IP 23 j. standard control panel with 630A 4 poles 25 kA MCCB.vi. The characteristics of the DG set shall be such as to operate them in parallel mode. The alternator should confirm to IS 4722. Routine tests as per relevant ISS shall be conducted and test reports of the same shall be furnished at the time of delivery vii. fuel tank .integral type fuel tank of adequate capacity with full tank diesel viii.battery: required no of suitably rated fully charged battery with leads and terminals as required as per manufactures requirement .ix.separate battery charger for charging from kseb supply, operation manual service manual, list of spares, etc. x .Acoustic enclosure a.The DG set shall be supplied along with a specially designed company fabricated (to be fabricated in the same company from where the DG Set is delivered )acoustic enclosure to meet the stringent MOSFET /CPCB norms of 75dB A@1m at 75% load under free field conditions b.sufficient space and clearance shall be maintained inside the enclosure to have optimum serviceability .c.Air inlet louvers shall be designed in such a way as to operate the set at rated load even at 50 degrees Celsius enclosure temperature. d.the enclosure shall be with UV resistant powder coating capable cable to withstand an extreme environment . e.hardware used shall be of only stainless steel make f.insulation material shall conform to IS 8183 specifications for better attenuation xi. documents to be supplied. a.engine manual b.spares parts book c.warranty certificate d.alternator manual &amp; test certificate 1 set control wiring drawing.The DG set should be compatible for remote operation.(Civil Foundation cost not included)

OD : Supply of installation, testing, pre commissioning and commissioning200kVA DG set with standard control panel as per technical details given below.<br>i. Engine b. Type of engine: diesel engine c. No of cylinders: suitable to develop the required BHP as per manufacturers standard d.Method of cooling: Water cooling(with radiator)e. Aspiration: Turbocharged after cooled f. Design: Suitable for generator set application g. Output: BHP rating specified by the respective manufacturers capable of delivering the required power for alternator.<br>ii. Standard accessories with diesel engine a. Flywheel housing and flywheel to suit single bearing alternator (close coupled arrangement )b.Air cleaner c.coolant kit d.fuel pump e.Electronic governor with solid-state potentiometer accepting digital pulse input from PLC (backed with the mechanical governor -if supplied as standard with the set by the manufacturer)f. fuel filter g.lubricating oil filter h.residential type exhaust silencer.<br>iii. engine instrument panel a.starting switch with key or button b.lubricating oil temperature gauge c.lubricating oil pressure gauge d.water temperature gauge e.RPM indicator with hour meter f.battery charging ammeter <br>iv. safety controls for engine a. trip for low lubricating oil pressure b. trip for high water temperature c.providing necessary warning system and other safeties as contemplated in relevant ISS d.fuel shunt off facility at over speed.iv. fuel pipe oil-resistant flexible hoses & 25 mm dial or nearest size MS pipe as per manufacturers requirement for fuel line extension with regulator valve .<br>v.Alternator: b.type::self exited and self regulated c. capacity :200kVA at 0.8 PF d.system of voltage :3 phase ,415V e. speed :1500rpm f.voltage regulation band :+1.00% of rated voltage g.insulation :class F/H h.AVR: AVR shall be provided with a motorized or solid-state potentiometer i. IP rating of enclosure :IP 23 j. Waveform distortion :no-load 1.5%,non distorting ,balanced linear load <5% k. telephone interference :better than 50 .l. total harmonic factor: better than 2% standard control panel with 320A 4 poles 25 kA MCCB.<br>vi. The characteristics of the DG set shall be such as to operate them in parallel mode. The alternator should confirm to IS 4722. Routine tests as per relevant ISS shall be conducted and test reports of the same shall be furnished at the time of delivery. vii. fuel tank .integral type fuel tank of adequate capacity with full tank diesel viii.battery: required no of suitably rated fully charged battery with leads and terminals as required as per manufactures requirement .ix.separate battery charger for charging from kseb supply, operation manual service manual, list of spares, etc. x .Acoustic enclosure a.The DG set shall be supplied along with a specially designed company fabricated (to be fabricated in the same company from where the DG Set is delivered )acoustic enclosure to meet the stringent MOSFET /CPCB norms of 75dB A@1m at 75% load under free field conditions b.sufficient space and clearance shall be maintained inside the enclosure to have optimum serviceability .c.Air inlet louvers shall be designed in such a way as to operate the set at rated load even at 50 degrees Celsius enclosure temperature. d.the enclosure shall be with UV resistant powder coating capable cable to withstand an extreme environment . e.hardware used shall be of only stainless steel make f.insulation material shall conform to IS 8183 specifications for better attenuation xi. documents to be supplied. a.engine manual b.spares parts book c.warranty certificate d.alternator manual & test certificate 1 set control wiring drawing.(Civil Foundation cost not included)

OD : Supply of installation, testing, pre commissioning and commissioning 250 kVA DG set as per technical details given below.<br>i. Engine b. Type of engine: diesel engine c. No of cylinders: suitable to develop the required BHP as per manufacturers standard d.Method of cooling: Water cooling(with radiator)e. Aspiration: Turbocharged after cooled f. Design: Suitable for generator set application g. Output: BHP rating specified by the respective manufacturers capable of delivering the required power for alternator.<br>ii. Standard accessories with diesel engine a. Flywheel housing and flywheel to suit single bearing alternator (close coupled arrangement )b.Air cleaner c.coolant kit d.fuel pump e.fuel filter g.lubricating oil filter h.residential type exhaust silencer.<br>iii. engine instrument panel a.starting switch with key or button b.lubricating oil temperature gauge c.lubricating oil pressure gauge d.water temperature gauge e.RPM indicator with hour meter f.battery charging ammeter. iv. safety controls for engine a. trip for low lubricating oil pressure b. trip for high water temperature c.providing necessary warning system and other safeties as contemplated in relevant ISS d.fuel shunt off facility at over speed.iv. fuel pipe oil-resistant flexible hoses & 25 mm dial or nearest size MS pipe as per manufacturers requirement for fuel line extension with regulator valve .<br>v.Alternator: b.type::self exited and self regulated c. capacity :400kVA at 0.8 PF d.system of voltage :3 phase ,415V e. speed1500rpm f.voltage regulation band :+1.00% of rated voltage g.insulation :class F/H h.AVR: AVR shall be provided with a motorized or solid-state potentiometer i. IP rating of enclosure :IP 23 j. standard control panel with 630A 4 poles 25 kA MCCB.<br>vi. The characteristics of the DG set shall be such as to operate them in parallel mode. The alternator should confirm to IS 4722. Routine tests as per relevant ISS shall be conducted and test reports of the same shall be furnished at the time of delivery <br>vii. fuel tank .integral type fuel tank of adequate capacity with full tank diesel. viii.battery: required no of suitably rated fully charged battery with leads and terminals as required as per manufactures requirement. ix.separate battery charger for charging from kseb supply, operation manual service manual, list of spares, etc. <br>x .Acoustic enclosure a.The DG set shall be supplied along with a specially designed company fabricated (to be fabricated in the same company from where the DG Set is delivered )acoustic enclosure to meet the stringent MOSFET /CPCB norms of 75dB A@1m at 75% load under free field conditions b.sufficient space and clearance shall be maintained inside the enclosure to have optimum serviceability .c.Air inlet louvers shall be designed in such a way as to operate the set at rated load even at 50 degrees Celsius enclosure temperature. d.the enclosure shall be with UV resistant powder coating capable cable to withstand an extreme environment . e.hardware used shall be of only stainless steel make f.insulation material shall conform to IS 8183 specifications for better attenuation <br>xi. documents to be supplied. a.engine manual b.spares parts book c.warranty certificate d.alternator manual & test certificate 1 set control wiring drawing.The DG set should be compatible for remote operation.(Civil Foundation cost not included)

OD : Supply of installation, testing, pre commissioning and commissioning 160kVA DG set with standard control panelas per technical details given below. i. Engine b. Type of engine: diesel engine c. No of cylinders: suitable to develop the required BHP as per manufacturers standard d.Method of cooling: Water cooling(with radiator)e. Aspiration: Turbocharged after cooled f. Design: Suitable for generator set application g. Output: BHP rating specified by the respective manufacturers capable of delivering the required power for alternator. ii. Standard accessories with diesel engine a. Flywheel housing and flywheel to suit single bearing alternator (close coupled arrangement )b.Air cleaner c.coolant kit d.fuel pump e.Electronic governor with solid-state potentiometer accepting digital pulse input from PLC (backed with the mechanical governor -if supplied as standard with the set by the manufacturer)f. fuel filter g.lubricating oil filter h.residential type exhaust silencer. iii. engine instrument panel a.starting switch with key or button b.lubricating oil temperature gauge c.lubricating oil pressure gauge d.water temperature gauge e.RPM indicator with hour meter f.battery charging ammeter iv. safety controls for engine a. trip for low lubricating oil pressure b. trip for high water temperature c.providing necessary warning system and other safeties as contemplated in relevant ISS d.fuel shunt off facility at over speed.iv. fuel pipe oil-resistant flexible hoses & 25 mm dial or nearest size MS pipe as per manufacturers requirement for fuel line extension with regulator valve.<br>v.Alternator: b.type::self exited and self regulated c. capacity :160kVA at 0.8 PF d.system of voltage :3 phase ,415V e. speed :1500rpm f.voltage regulation band :+1.00% of rated voltage g.insulation :class F/H h.AVR: AVR shall be provided with a motorized or solid-state potentiometer i. IP rating of enclosure :IP 23 j. Waveform distortion :no- load 1.5%,non distorting ,balanced linear load <5% k. telephone interference :better than 50 .l. total harmonic factor: better than 2% standard control panel with 250A 4 poles 35/36 kA MCCB. vi. The characteristics of the DG set shall be such as to operate them in parallel mode. The alternator should confirm to IS 4722. Routine tests as per relevant ISS shall be conducted and test reports of the same shall be furnished at the time of delivery vii. fuel tank .integral type fuel tank of adequate capacity with full tank diesel viii.battery: required no of suitably rated fully charged battery with leads and terminals as required as per manufactures requirement . ix.separate battery charger for charging from kseb supply, operation manual service manual, list of spares, etc.<br>x .Acoustic enclosure a.The DG set shall be supplied along with a specially designed company fabricated (to be fabricated in the same company from where the DG Set is delivered) acoustic enclosure to meet the stringent MOSFET /CPCB norms of 75dB A@1m at 75% load under free field conditions b.sufficient space and clearance shall be maintained inside the enclosure to have optimum serviceability .c.Air inlet louvers shall be designed in such a way as to operate the set at rated load even at 50 degrees Celsius enclosure temperature. d.the enclosure shall be with UV resistant powder coating capable cable to withstand an extreme environment . e.hardware used shall be of only stainless steel make f.insulation material shall conform to IS 8183 specifications for better attenuation xi. documents to be supplied. a.engine manual b.spares parts book c.warranty certificate d.alternator manual & test certificate 1 set control wiring drawing.(Civil Foundation cost not included)

OD: Supply, erection, commissioning of 8" dia additional length of exhaust pipes with necessary bends, clamps etc from residential silencer as required.

OD: Supplying and providing thermal insulation with aluminium cladding to 8" dia exhaust pipe as required.

OD: Supplying and providing thermal insulation with aluminium cladding to 4" dia exhaust pipe as required

OD: Supply, erection, commissioning of 4" dia additional length of exhaust pipes with necessary bends, clamps etc from residential silencer as requied

OD: Supplying and providing thermal insulation with aluminium cladding to 6" dia exhaust pipe as required

OD: Supply, erection, commissioning of 6" dia additional length of exhaust pipes with necessary bends, clamps etc from residential silencer as requied

OD: Supplying and providing thermal insulation with aluminium cladding to 5" dia exhaust pipe as required

OD: Supply, erection, commissioning of 5" dia additional length of exhaust pipes with necessary bends, clamps etc from residential silencer as requied

OD: Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate and finishing with Epoxy paint (two or more coats) at all locations prepared and applied using structural steel etc. as required, all complete(for DG exhaust)

OD : Supply and installation of 24V battery charger for the existing DG set as required.

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

1.55.2 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.21.4 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

OD: Supplying and fixing of 20mm PVC flexible conduit along with accessories as required.

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.22 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.17.23 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 4 sq. mm

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

1.17.32 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 6 sq. mm

1.19 : Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

90.10.3.15 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )

OD : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RCPOHS compliant). 20A DP switch with indicator

90.10.3.33 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.3 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module

1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

1.28.5 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

90.10.1.2 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.3 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.4 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.5 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.6 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )8 module moulded plastic box on surface

1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

90.5.1.3 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.

90.5.1.7 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.

90.5.1.8 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.3.4 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door

2.4.1 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door

2.4.2 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door

2.4.3 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door

90.11.1.15 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.16 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.20 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

OD : Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6-32A FP

OD : Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40-63A SP MCB

OD : Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40-63A TP MCB

OD : Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40-63A FP MCB

OD : Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40-63A DP MCB

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps

2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.1 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

OD : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

OD : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

OD : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps.

OD : Supply and fixing of thermoplastic polycarbonate cable junction box IP66/67 in accordance with IEC60529 environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, shockproof with 5 pole terminals suitable to terminate upto 2.5sqmm.

2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.14.10.3 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

OD : Supply, installation, testing and commissioning of thermoplastic polycarbonate 4 Module MCB DB in accordance with IEC60529 with transparent hinged cover environment friendly, recyclable, UV resistant, halogen &amp; silicon free, anti acid, anti corrosive enclosure having size not less than 126x228x111mm as required.

OD : Supply, installation, testing and commissioning of thermoplastic polycarbonate 3 Module MCB DB in accordance with IEC60529 with transparent hinged cover environment friendly, recyclable, UV resistant, halogen silicon free, anti acid anti corrosive enclosure having size not less than 102x197x92mm as required.

2.24.1 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 4 way, Double door TPN MCBDB

2.24.2 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door TPN MCBDB

2.24.3 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 8 way, Double door TPN MCBDB

OD : Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A SP MCB

OD : Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load<br>of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A TP MCB

OD : Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load<br>of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A - 63A FP

OD : Supplying and fixing following rating, four pole, 415 volts, switch disconnector with enclosure complete with connections, testing and commissioning etc. as required. 125A

OD : Earthing with G.I. earth pipe 2.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

OD : Supply and fixing of following size earth bench, fixing on wall using iron screws, bench having holes for connecting earth strip/wires, making good the damages, colour washing etc as required. 40X6X400mm GI earth bench

90.14.10.4 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 3.15 mm copper conductor (10 SWG)

90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 4 mm copper conductor (8 SWG)

90.16.1.2 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 3.15 mm copper conductor (12 SWG)

90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run) 25x 3 mm copper strip

90.16.3.10 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run) 25x 6 mm copper strip

5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm

7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

7.3.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation and refilling the trench etc as required, butexcluding sand cushioning and protective covering.Upto 35 sq. mm

7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm

7.5.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing RCC/ HUME/ METAL pipe as required.Above 185 sq. mm and upto 400 sq. mm

7.6.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing masonry open duct as required.Above 95 sq. mm and upto 185 sq. mm

7.6.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 185 sq. mm and upto 400 sq. mm

7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.7.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

7.7.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

7.9 : Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 kV grade of following sizes as required. 3.5 C 95sqmm

OD : Supply of one number PVC insulated and PVC sheathed /XLPE armoured Aluminiuim power cable of 1.1 kV grade of following sizes as required. 3C 16sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 2C 10 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3C 10sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3C 35sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 35 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 50 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 70 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 95 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 120 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 150 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 185 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 240 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 300 sqm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 400 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 4C 10 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 4C 16 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 4C 25 sqmm

90.6.5.5 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 2 core 2.50 sq mm

90.6.5.11 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 3 core 1.50 sq mm

90.6.5.13 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 3 core 4 sq mm

90.6.5.18 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 1.50 sq mm

90.6.5.20 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 4.00 sq mm

90.12.41.32 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

90.12.41.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

90.12.41.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

OD : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed armoureed copper conductor. 6 core 2.5 sq mm

OD : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed armoureed copper conductor. 3 core 6 sq mm

OD : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed armoureed copper conductor. 3 core1.5 sq mm

OD : Supply and laying of single-core PVC insulated FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part. 6.00 sq.mm 1 Run

90.6.4.64 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 16 sq.mm 6 Run

OD : Supply and laying of single-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960. 10.00 sq.mm 1 Run

OD : Supply and laying of single-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960. 16.00 sq.mm 1 run

OD : Supply and laying of single-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960. 35.00 sq.mm 1 Run

OD : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheilded 650/1100 v grade copper round conductor flexible cables of the following sizes. 2 core x 1.5 sq. mm

OD : Supply and fixing (IP68) thermoplastic polyamide cable gland with appropriate size lock nut suitable for 3 core 1.5/2.5/4 sq mm armoured copper cable including all accessories as required.

9.1.11 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 50 sq. mm (32mm)

9.1.2 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)

9.1.10 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 35 sq. mm (28mm)

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.25 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

9.1.30 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)

9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

OD : Supplying and making end termination copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 1R X 6 sq. mm

OD : Supplying and making end termination copper lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. 1R X 10 sq. mm

OD : Supplying and making end termination copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 1R X 16 sq. mm

OD : Supplying and making end termination copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 1R X 35 sq. mm

OD : Supply of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes.2C x 1.5 sqmm

OD : Supply of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes.2C x 2.5 sqmm

OD : Supply of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade grade of the following size. 2C x 4 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured copper power cable of 1.1 KV grade of following sizes as required.3 C 1.5 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured copper power cable of 1.1 KV grade of following sizes as required.3 C 2.5 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Copper power cable of 1.1 KV grade of following sizes as required. 3C 6 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3C 50sqmm

OD : Supply of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following size. 4C x 4 sqmm

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 3.5C 50 sqmm XLPE Al

OD : Supply of one number PVC insulated and PVC sheathed / XLPE armoured Aluminium power cable of 1.1 KV grade of following sizes as required. 4C 16 sqmm XLPE Al

OD : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.3 X 2.5 sq. mm Cu

OD : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 2 X 4 sq. mm

OD : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 4 X 4 sq. mm Cu

OD : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 2 X 2.5 sq. mm Cu

OD : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 2 X 1.5 sq. mm Cu

OD : Supply and fixing (IP68) thermoplastic polyamide cable gland with appropriate size lock nut suitable for 2 core 1.5/2.5/4 sq mm armoured copper cable including all accessories as required. M25 x 1.5 or equivalent

OD : Supply and drawing of one number PVC insulated and PVC sheathed / XLPE unarmoured copper power cable of 1.1 KV grade in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 2C 1.5 sqmm XLPE

1.41 : Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

90.3.5 : Conveyance, installation, testing and commissioning of pre-wired light fitting of all types complete with all accessories and fluorescent lamps etc. suspended from ceiling using 2 nos steel chain (16 SWG or nearest available size) of length not exceeding 30 cm properly hooked to steel hooks anchored to the ceiling and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.

90.3.11 : Conveyance, installation, testing and commissioning of surface mounting down light fittings of all types directly on ceiling including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required.

90.3.12 : Conveyance and fixing charges of recess mounting down light fittings of all types complete with all accessories in the existing opening of false ceiling, giving connections with the existing wire etc., as required.

90.3.13 : Conveyance, installation, testing and commissioning of ornamental wall light fittings of all types directly on wall including giving connections with required length of 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required.

OD : Supply of 30 ± 5W linear recessed light fixture in standalone configuration -4 feet (IP 20) have aluminium extruded powder coated white housing, colour temperature 4000K-5700K , inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including accessories for recess mounting and all<br>connections etc as required.

OD : Supply of 8±5W LED recess mounted light fixture (IP65), 3000K-4000K colour temperature, working on 240V AC, suitable for outdoor applications, including all connections etc as required.

OD : Supply of 34±5W Surface/Wall mounted LED tube light fixture -4 feet (IP 20) have extruded polycarbonate housing, 6500K colour temperature, inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD: Supply of decorative wall light fixture with 20±5W B22 LED bulb working on 240V AC, suitable for indoor applications, including all connections etc as required.

OD : Supply of 10±3W LED Surface mounted light fixture (IP54) have graphite greypowder coated finishing, colour temperature 3000K-4000K with minimum 100 lumen/Watt, working on 240V AC, including all connections etc as required

OD : Supply of 12±5W Recess mounted LED round down light fixture (IP 20) have pressure die cast aluminum housing, 4000-5700K colour temperature, driver pre-wired up to terminal block with plug in connectors, minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 18±5W Surface/Wall mounted LED linear light fixture (IP 65) have polycarbonate housing 5700-6500K colour temperature with minimum 100 lumen/Watt, working on 240 V AC suitable for indoor application including all connections etc as required.

OD :Supply of 32±5W Recess mounted LED round down light fixture (IP 20) have die cast aluminum housing, 4000K-5700K colour temperature with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 30±5W linear suspended light fixture in standalone configuration -4 feet (IP 20) have aluminium extruded powder coated white housing, colour temperature 4000K-5700K, inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including suspension kit for mounting and all connections etc as required.

OD : Supply of 35±5W decorative type suspended LED fitting, housing made of Extruded aluminium, with 4000K colour temperature and having minimum 100 lumen/Watt,suitable for indoor applications, including all connections etc. as required

OD :Supply of 40±5W linear suspended light fixture in standalone configuration -8 feet (IP 20) have aluminium extruded powder coated white housing, colour temperature 4000K-5700K, inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including suspension kit for mounting and all connections etc as required.

OD : Supply, installation, testing and commissioning of 80±5W highbay light fixture(IP66), having pressure die cast aluminium housing, 5700K colour temperature, minimum 100 lumen/Watt, working on 240V AC, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 100±5W highbay light fixture(IP66), having pressure die cast aluminium housing, 5700K colour temperature, minimum 100 lumen/Watt, working on 240V AC, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 35±2W highbay light fixture(IP66), having pressure die cast aluminium housing, 5700K colour temperature, minimum 100 lumen/Watt, working on 240V AC, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 70±2W LED street light, housing made of diecast aluminium, colour temperature 5700K, having luminous efficacy of 150 lumens per watt, with all necessary accessories etc as required (Excluding civil foundation).

OD : Supply, installation, testing and commissioning of IP65 rated 30±2W LED post top, pole made of MS, housing made of polycarbonate, colour temperature 5700K, having luminous efficacy of 125 lumens per watt, including 4m long single arm pole with all necessary accessories etc as required (Excluding civil foundation).

OD : Supply, installation, testing and commissioning of IP65 rated 2X 30±5W LED post top, pole made of MS, housing made of polycarbonate, colour temperature 5700K, having luminous efficacy of 125 lumens per watt, including 4m long double arm pole with all necessary accessories etc as required (Excluding civil foundation).

OD : Supplying and installation of 2X12±2W IP65 LED bollard, housing made of die cast aluminium having color temperature 3000K, lumen output 3450lm, CRI - 80, power factor - 0.95, with necessary accessories etc as required (Excluding civil foundation).

OD : Supply, installation, testing and commissioning of 6W LED spike light fixture, having pressure diecast aluminium housing, 3000K colour temperature, IP65, lumen output 900lm, beam angle -25 degree, including all connections etc. as required.

OD : Supply, installation, testing and commissioning of 60±2W LED street light, housing made of diecast aluminium, colour temperature 5700K, having luminous efficacy of 150 lumens per watt, with all necessary accessories etc as required (Excluding civil foundation). Make: LT adornis min or equivalent

OD : Supply, installation, testing and commissioning of 12±2W Pathway Light Fixture , having pressure diecast aluminium housing, 3000K colour temperature, lumen output 1800lm, IP65 suitable for outdoor applications, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 80±2W LED street light, housing made of diecast aluminium, colour temperature 5700K, having luminous efficacy of 150 lumens per watt, with all necessary accessories etc as required (Excluding civil foundation).

OD : Supply, installation, testing and commissioning of 30±2W Flood Light Fixture , housing made of polycarbonate, 4000K colour temperature, having luminous efficacy of 95 lumens per watt, suitable for outdoor applications, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 6X 150±2W Flood Light Fixture , housing made of diecast aluminium, 5700K colour temperature, IP66, having luminous efficacy of 150 lumens per watt, suitable for outdoor applications, including all connections etc as required. Make :

90.3.17.2 : Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.40 mm dia GI pipe

OD : Supply, installation, testing and commissioning of 6X 200±2W Flood Light Fixture , housing made of diecast aluminium, 5700K colour temperature, IP66, having luminous efficacy of 150 lumens per watt, suitable for outdoor applications, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 10X 300±2W Flood Light Fixture , housing made of diecast aluminium, 5700K colour temperature, IP66, having luminous efficacy of 150 lumens per watt, suitable for outdoor applications, including all connections etc as required.

90.15.2.3 : Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 100mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 12 Meters

90.15.2.4 : Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 150mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector

OD : Supply of 24±5W Surface/Wall mounted LED tube light fixture -4 feet (IP 65) have extruded polycarbonate housing, 6500K colour temperature, with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor/outdoor applications including all connections etc as required.

OD : Supply, installation, testing and commissioning of 3±1W step light fixture, having aluminum housing, 3000Kcolour temperature, IP44 suitable for outdoor applications, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 3±1W LED flush or surface mounted foot light fixture, housing made of polycarbonate, 3000K colour temperature, working on 240V AC, suitable for indoor applications, including all connections etc. as required. Make - Legrand Myrius Next gen or equivalent

OD : Supply of 20±5W Surface/Wall mounted LED tube light fixture -4 feet (IP 65) have polycarbonate housing, 6500K colour temperature, inbuilt electronic driver with minimum 130 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 6±2W Surface mounted LED round down light fixture(IP20), 6500K colour temperature, minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 34±5W Surface/Wall mounted LED tube light fixture -4 feet (IP 20) have extruded polycarbonate housing, 6500K colour temperature, inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 15±5W LED surface mounted round light fixture(IP 20) have CRCA powder coated housing, available in both black and white colour, colour temperature 4000K-5700K with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications, including all connections etc as required.

90.15.3.5 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 7 Meters

90.15.3.6 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 7 Meters

90.15.3.7 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 8 Meters

90.15.3.9 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 155 mm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 9 Meters

OD : Supply and installation of 10cm DIN rail for fixing SP MCB in the existing street light poles as required

OD : Supply and fixing of 25cmX12cm hylam sheet for covering the junction box opening in the existing street light poles as required

OD : Supply, installation, testing and commissioning of 7W LED spike light fixture, having aluminium housing, 3000K colour temperature, IP65,including all connections etc. as required

OD : Supply and installation of loop in loop out connector in the existing street light poles as required

OD : Supply and fixing frame for recess mounted (2x2) light fixture including all connections etc as required.

OD : Supplying and installation of 10+/-2W IP65 LED bollard, body height of 0.6 m, housing made of die cast aluminium having color temperature 3000K, lumen output 500lm, CRI - 80, power factor - 0.95, with necessary accessories etc as required (Excluding civil foundation).

OD : Supply of 24±5W LED Recess mounted (2x2) light fixture (IP20) have CRCA white powder coated housing with ABS plastic top cover, colour temperature 4000K-5700K with minimum 100 lumen/Watt, working on 240V AC, suitable for<br>indoor applications, including all connections etc as required.

OD : Supply of 36±5W LED Recess mounted (2x2) light fixture (IP20) haveWhite powder coated housing & frame in CRCA sheet, colour temperature 4000K-5700K with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications, including all connections etc as required.

OD : Supply of 24±5W Surface mounted LED tube light fixture, 4000-6500K colour temperature minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 12±2W surface mounted light fixture have IP65 rated, colour temperature 4000K-6500K, Lumen output 840lm, CRI 80 including all necessary accessories etc as required. Make Philips or equivalent

OD : Supply of 15±5W LED surface mounted round light fixture(IP 20) have CRCA powder coated housing, available in both black and white colour, colour temperature 4000K-5700K with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications, including all connections etc as required.

OD : Supply of 30±5W LED Suspended round light fixture have aluminium body powder coated in white or black, colour temperature 4000K-5700K with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications, including all connections etc as required

OD : Supply of 25±5W LED Surface mounted light fixture (IP54) have graphite grey powder coated finishing, colour temperature 3000K-4000K with minimum 100 lumen/Watt, working on 240V AC, suitable for outdoor applications, including all connections etc as required.

OD : Supply of 20±5W Surface/Wall mounted LED tube light fixture -4 feet (IP 20) have extruded polycarbonate housing, 6500K colour temperature, inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 18±5W Recess mounted LED round down light fixture (IP 20) have pressure die cast aluminum housing, 4000- 5700K colour temperature, driver pre-wired up to terminal block with plug in connectors, minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 16±5W Surface mounted LED round down light fixture(IP20), 6500K colour temperature, minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 15±5W LED Suspended round light fixture(IP 20) have CRCA powder coated housing, available in both black and white colour, 4000-5700K colour temperature with minimum 100 lumen/Watt, working on 240V AC, suitable for;indoor applications, including all connections etc as required.

OD : Supply of 18±5W LED Suspended round light fixture(IP 20) have CRCA powder coated housing, available in both black and white colour, colour temperature 4000K-5700K with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications, including all connections etc as required.

OD : Supply of 15±5W Recess mounted LED round down light fixture (IP 20) have pressure die cast aluminum housing, colour temperature 4000K-5700K, driver pre-wired up to terminal block with plug in connectors, minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required

OD : Supply of 10±3W Surface/Wall mounted LED tube light fixture -2 feet (IP 20) have extruded polycarbonate housing, 6500K colour temperature, inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 10±3W Wall/Surface mounted LED bulkhead light fixture (IP 65), colour temperature 5700K-6500K with minimum 100 lumen/Watt, working on 240V AC, suitable for outdoor applications including all connections etc as required

OD : Supply of 9±5W Recess mounted LED round down light fixture (IP 40) have pressure die cast aluminum housing, colour temperature 4000K-5700K, driver pre-wired up to terminal block with plug in connectors, minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of 12±5W Recess mounted LED round down light fixture (IP 20) have pressure die cast aluminum housing, 4000-5700K colour temperature, driver pre-wired up to terminal block with plug in connectors, minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required

OD : Supply of 9±5W Recess mounted LED round down light fixture (IP 20) have pressure die cast aluminum housing, colour temperature 4000K-5700K, driver pre-wired up to terminal block with plug in connectors, minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required.

OD : Supply of decorative wall light fixture 18W LED working on 240V AC, suitable for indoor applications, suitable wall installation, including all connections etc as required

OD : Supply of decorative wall light fixture(IP 40) with 7W E27 LED bulb working on 240V AC, suitable for indoor applications, made of opal glass with chrome finish working on 240V AC, including all connections etc as required.

OD : Supply of decorative wall light fixture with 9W B22 LED bulb working on 240V AC, suitable for indoor applications, including all connections etc as required

OD : Supply of decorative wall light fixture(IP55) in black finish with 9W E27 LED bulb working on 240V AC, suitable for outdoor applications, made of shockproof resin material, UV-rays stabilized, rust and corrosion-free. Modular construction suitable wall installation, including all connections etc as required

OD : Supply of 6.5W Wall mounted LED bulkhead light fixture (IP 65) have aluminum die cast housing, colour temperature 4000K-6500K with minimum 100 lumen/Watt, working on 240V AC, suitable for outdoor applications including all connections etc as required.

OD : Supply of 30±5W LED Recess mounted (2x2) light fixture (IP20) have CRCA white powder coated housing with ABS plastic top cover, colour temperature 4000K-5700K with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications, including all connections etc as required.

OD : Supply of 30±5W LED recess mounted clean room square down light fixture (IP54) have bottom opening, CRCA powder coated housing, bottom frame and reflector, 5700K colour temperature, driver pre-wired upto terminal block with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications, including all connections etc as required.

OD : Supply of 10±3W Wall/Surface mounted LED bulkhead light fixture (IP 65), 5700-6500K colour temperature with minimum 100 lumen/Watt, working on 240V AC, suitable for outdoor applications including all connections etc as required

OD : Supply of 36±5W Surface/Wall mounted LED tube light fixture -4 feet (IP 20) have extruded polycarbonate housing, 6500K colour temperature, inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including all connections etc as required

OD : Supply of 40±5W Suspended LED linear light fixture -8 feet (IP 20) have aluminium extruded powder coated white housing, 4000-5700K colour temperature, inbuilt electronic driver with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications including suspension kit for mounting and all connections etc as required.

OD : Supply of 20±5W LED Suspended round light fixture have aluminium body powder coated in white or black, 4000- 5700K colour temperature with minimum 100 lumen/Watt, working on 240V AC, suitable for indoor applications, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 8±5W Spike LED light fixture (IP 65) have pressure die cast aluminum housing, transparent tempered glass diffuser, matt grey finish, 3000K colour temperature, minimum 80 lumen/Watt, working on 240V AC, suitable for outdoor applications including all connections etc as required

OD : Supply of 26W surface mounted LED light fixture(IP65) in white finish having 3000K colour temperature and 30 degree beam angle, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 200W drive (IP65) suitable for profile light including all connections as required.

OD : Supply, installation, testing and commissioning of 150W drive (IP65) suitable for profile light including all connections etc as required.

OD : Supply, installation, testing and commissioning of 100W drive (IP65) suitable for profile light including all connections etc as required

OD : Supply, installation, testing and commissioning of customized ceiling recessed profile light fixture (IP65), 12W/m, 24V, 4000K colour temperature, 35mmX37mm (BXH) size including all connections etc as required.

OD : Supply, installation, testing and commissioning of 7±5W structure mounted LED light fixture(IP65), Graphite gray finishing, 3000K colour temperature, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 4±1W LED double head wall washer light fixture (IP44), have aluminum housing, colour temperature 3000K, working on 240V AC, suitable for outdoor applications including all connections etc as required

OD : Supply, installation, testing and commissioning of 1x3W 1 way path way light fixture, 3000K colour temperature, IP67 suitable for outdoor applications, including all connections etc as required.

OD : Supply, installation, testing and commissioning of 60±2W LED street light (IP65/66), housing made of diecast aluminium, colour temperature 5700K, having minimum 100 lumen/Watt with all necessary accessories etc as required (Excluding civil foundation).

OD : Supply, installation, testing and commissioning of 2.5±1W step light fixture, having powder coated aluminum housing, 3000K colour temperature, IP65 suitable for outdoor applications, including all connections etc as required.

90.4.3 : Conveyance installation testing and commissioning ceiling fan of all sizes using standard accessories excluding resistance type regulator wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or extending the original wiring etc. as required.

OD : Supply of ceiling fan of 900mm size using standard accessories excluding resistance type regulator wiring the down rod etc. as required

OD : Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

OD : Supply of following Exhaust fan in plastic frame working on 230 V AC including giving connection etc. as required. 250mm light duty exhaust fan.

OD : Supply of following Exhaust fan in metal frame working on 230 V AC including giving connection etc. as required. 380mm light duty exhaust fan.

1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep

90.4.6 : Conveyance, installation, testing and commissioning of wall mounting fans of all types using mounting brackets supplied along with the fan.

OD : Supply of 400mm sweep wall fan including all accessories etc. as required.

OD : Supply of 450mm sweep wall fan including all accessories etc. as required.

OD : Supply installation, testing and commissioning of 60kVA modular UPS three phase to three phase, 30 min battery backup, with input power factor 0.99, output power factor 1, efficiency not less than 96%, with input external isolation transformer, with input 415V, 50Hz three phase, output 415V, IGBT rectifier and IGBT inverter. The UPS system shall be with automatic & manual maintenance bypass switch facility.UPS shall have separate battery bank, and batteries shall be connected in single string.The system shall comply to IEC /EN 62040-1, 62040-2, 62040-3 and relevant IS standards.The acoustic noise of the system should be less than 58dB. The UPS shall be with battery circuit breaker-1no & required nos. of SMF batteries for providing 30 Minutes back up on full load and battery accessories like battery rack, interconnecting cables etc.

OD : Supply installation, testing and commissioning of 20kVA three phase to three phase UPS indoor (IP20) in stand alone configuration, 30 min battery backup, with input power factor 0.99, output power factor 0.9, efficiency not less than 93%, with inbuilt isolation transformer, with input 415V, 50Hz three phase, output 415V, IGBT rectifier and IGBT inverter. The UPS system shall be with automatic & manual maintenance bypass switch facility.UPS shall have separate battery bank, and batteries shall be connected in single string.The system shall comply to IEC /EN 620403 and relevant IS standards.The acoustic noise of the system should be less than 58dB. The UPS shall be with battery circuit breaker-1no & required nos. of SMF batteries for providing 30 Minutes back up on full load and battery accessories like battery rack, interconnecting cables etc.

OD : Supply installation, testing and commissioning of 15kVA three phase to three phase UPS indoor (IP20) in stand alone configuration, 30 min battery backup, with input power factor 0.99, output power factor 0.9, efficiency not less than 93%, with inbuilt isolation transformer, with input 415V, 50Hz three phase, output 415V, IGBT rectifier and IGBT inverter. The UPS system shall be with automatic & manual maintenance bypass switch facility.UPS shall have separate battery bank, and batteries shall be connected in single string.The system shall comply to IEC /EN 620403 and relevant IS standards.The acoustic noise of the system should be less than 58dB. The UPS shall be with battery circuit breaker-1no & required nos. of SMF batteries for providing 30 Minutes back up on full load and battery accessories like battery rack, interconnecting cables etc.

OD : Supply installation, testing and commissioning of 30kVA three phase to three phase UPS indoor (IP20) in stand alone configuration, 30 min battery backup, with input power factor 0.9, output power factor 0.9 or 1, efficiency not less than 94%, without isolation transformer, with input 415V, 50Hz three phase, output 415V, IGBT rectifier and IGBT inverter. The UPS system shall be with automatic &amp; manual maintenance bypass switch facility.UPS shall have separate battery bank, and batteries shall be connected in single string.The system shall comply to IEC /EN 62040-1, 62040-2, 62040-3 and relevant IS standards.The acoustic noise of the system should be less than 58dB. The UPS shall be with battery circuit breaker-1no required nos. of SMF batteries for providing 30 Minutes back up on full load and battery accessories like battery rack, interconnecting cables etc.

OD : Supply, installation, and commissioning of 6kVA UPS Single phase in and out with indoor (IP20) with 30 Min backup SMF battery of reputed approved make exide/quanta), Input pf 0.99, it shall be 100% generator compatible, with Efficiency - 85 % and output power factor .8 including all accessories etc as required. The acoustic noise at 1m of the system should be 55dB.The system shall comply to IEC /EN 62040-1,2,3 and PEP Certificates, and relevant IS standard along. The system shall be true online double - conversion DSP based UPS system and also UPS shall be with automatic &amp; manual bypass switch. The system shall have IGBT rectifier and inverter.

OD : Supply, installation, and commissioning of 3kva UPS Single phase in and out. with indoor (IP20) with 30 Min backup SMF battery of reputed approved make exide/quanta), Input pf 0.99, it shall be 100% generator compatible, with Efficiency > 85 % and output power factor .8 including all accessories etc as required. The acoustic noise at 1m of the system should be <55dB.The system shall comply to IEC /EN 62040-1,2,3 and PEP Certificates, and relevant IS standard along. The system shall be true online double - conversion DSP based UPS system and also UPS shall be with automatic & manual bypass switch. The system shall have IGBT rectifier and inverter.

OD : Supply, installation, and commissioning of 2kVA UPS Single phase in and out with indoor (IP20) with 30 Min backup SMF battery of reputed approved make exide/quanta), Input pf 0.99, it shall be 100% generator compatible, with Efficiency > 85 % and output power factor .8 including all accessories etc as required. The acoustic noise at 1m of the system should be <55dB.The system shall comply to IEC /EN 62040-1,2,3 and PEP Certificates, and relevant IS standard along. The system shall be true online double - conversion DSP based UPS system and also UPS shall be with automatic & manual bypass switch. The system shall have IGBT rectifier and inverter.

OD : Supply, installation, testing and commissioning of Surge Protection Device Class B+C have total maximum discharge current 50 kA.Make: OBO or equivalent

4.6.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness Details of cost for 30 metres

4.6.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness

4.6.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.6.7 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.600 mm width X 50 mm depth X 2.0 mm thickness

4.7.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.100 mm width X 50 mm depth X 1.6 mm thickness

4.7.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.150 mm width X 50 mm depth X 1.6 mm thickness

4.7.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.7.7 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

4.8.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.100 mm width X 50 mm depth X 1.6 mm thickness

4.8.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.150 mm width X 50 mm depth X 1.6 mm thickness

4.8.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.8.7 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

4.10.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.100 mm width X 50 mm depth X 1.6 mm thickness

4.10.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.150 mm width X 50 mm depth X 1.6 mm thickness

4.10.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.10.7 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

90.9.2.1 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.9.2.2 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.9.2.3 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.9.2.4 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.9.2.5 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.9.2.6 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.9.2.7 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.9.2.8 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper/brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

OD : Supply, installation, testing and commissioning of 12 kV, SF6 Ring Main Unit having Busbar Suitable for carrying a current of 800A with Load break switch of rating 800A- 2 nos, with vacuum Circuit Breaker of same rating with internal arc withstanding of 26.2kA for 1Sec with protection of Self powered OC/EF Protection relay DPX-1 with suitable protection CTs for Xfer Rating 100 kVA and above with O/C Setting ranging 20% to 250% and E/F Settings 10% to 250%

OD : Supply, installation, testing and commissioning of 11kV indoor Vacuum Circuit Breaker main panel consisting of the following; Incomer: 11kV, 800A, 350MVA Vacuum Circuit Breaker - 1 nos Dual core Resin cast CT 80/5A,class -5P10, 15VA , Aluminium busbar, necessary protection devices such as master trip relay, auxillary relay, IDMT over current relay, CT/PT units with adequate ratings for Energy Meter, indicating lamp for VCB ON, OFF, spring charge, trip circuit healthy, DC ON, trip, annunciator with alarm, push button for trip circuit healthy and other panel accessories. <br>Outgoing 01: 11kV, 630A, 350MVA Vacuum Circuit Breaker - 1 nos, CT/PT units with adequate ratings, Aluminium busbar, necessary protection devices such as master trip relay, IDMT over current relay, auxillary relay, indicating lamp for VCB ON, OFF, spring charge, trip circuit healthy, DC ON, trip, annunciator with alarm, push button for trip circuit healthy and other panel accessories. Including 11kV resin cast CT **/5A,15VA class 5P10 and sealing provisions.<br>Outgoing 02: 11kV, 630A, 350MVA Vacuum Circuit Breaker - 1 nos, CT/PT units with adequate ratings, Aluminium busbar, necessary protection devices such as master trip relay, IDMT over current relay, auxillary relay, indicating lamp for VCB ON, OFF, spring charge, trip circuit healthy, DC ON, trip, annunciator with alarm, push button for trip circuit healthy and other panel accessories. Including 11kV resin cast CT **/5A,15VA class 5P10 and sealing provisions.

OD : Supply, installation, testing and commissioning of 11kV HT panel A consisting of the following; Incomer: 11KV, 350MVA, 630A TP EDO VCB- 1 nos, Including 11kV resin cast CT **/5A,15VA class 5P10 and sealing provisions, necessary protection devices such as master trip relay, auxillary relay, IDMT over current relay, indicating lamp for VCB ON, OFF, spring charge, trip circuit healthy.Outgoings: CT with suitable ampere rating, PT with suitable voltage rating, 630A 11kV TP air break SFU with shunt trip -4 nos, Provision for fixing TOD Meter-4 nos\ etc as required.

OD : Supply, installation, testing and commissioning of 11kV HT panel B consisting of the following; Incomer: 11KV, 350MVA, 630A TP EDO VCB- 1 nos, Including 11kV resin cast CT **/5A,15VA class 5P10 and sealing provisions, necessary protection devices such as master trip relay, auxillary relay, IDMT over current relay, indicating lamp for VCB ON, OFF, spring charge, trip circuit healthy.Outgoings: CT with suitable ampere rating, PT with suitable voltage rating, 630A 11kV TP air break SFU with shunt trip -2 nos, Provision for fixing TOD Meter-2 nos etc as required

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Incomer 01: RYB Indicators with control fuses - 2 set, Multi function meter with control fuses and CT- 1set, 320A 4P 25kA MCCB SET AT 266A,3O/C,E/F,S/C releases with shunt trip coil & isolation duty- 1 nos, Class B/Class 1 SPD, 325A FP Contactor-1no, 320/5A CL 1 15VA CT for Y phase of APFC panel. Incomer 02: RYB Indicators with control fuses - 2 set, Multi function meter with control fuse and CT- 1set, 320A 25kA 4P MCCB- 1 nos, Reverse power relay with control 320/5A 5P10 15VA CT-1no., 325A FP Contactor- 1no<br>AMF relay with electrical and mechanical interlock and its accessories including internal wiring<br>Busbar: Al busbar suitable for 320A<br>Outgoings:<br>160A 25kA TM TPN MCCB - 4Nos<br>125A 25kA TM TPN MCCB -3Nos<br>100A 25kA TM TPN MCCB -2Nos<br>160A FP Isolator - 1 nos<br>MSB

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Incomer: RYB indicator with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, , 8 stage APFC relay - 1 set, 160A 25kA TPN TM MCCB - 1 nos<br>Busbar: Al busbar suitable for 160A<br>Outgoings:<br>40A 16kA TP TM MCCB - 6 nos,<br>32A 16kA TP TM MCCB - 1 nos,<br>63A 16kA TP TM MCCB - 1 nos<br>7.5kVAR Capacitor, 20kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set,15kVAR Capacitor+capacitor duty contactor and 7%detuned reactor - 1 Set, 10kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set, 5kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set, 3kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set, 2kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP isolator - 1 nos<br>Busbar: Al busbar suitable for 125A<br>Outgoings:<br>100A 16kA TM TPN MCCB -1Nos<br>63A 16kA TM TPN MCCB -3Nos<br>40A 16kA TM TPN MCCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.Incomer: RYB indicator with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 63A FP Isolator - 1 nos Busbar: Al busbar suitable for 63A Outgoings: 40A FP 100mA RCBO - 1 nos, 25A DP 30mA RCBO - 1 nos, 6A 10kA SP MCB - 4 nos etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Incomer : RYB Indicators with control fuses - 1 set, ELR with CBCT- 1set, Multi function meter with control fuses and CT- 1set, 160A FP MCCB 25kA - 1 nos<br>Busbar: Al busbar suitable for 160A<br>Outgoings:<br>40A 16kA TM TP MCCB - 11Nos<br>63A 16kA TM TP MCCB -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 160A FP MCCB 25kA - 1 nos<br>Busbar: Al busbar suitable for 160A<br>Outgoings:<br>40A 16kA TM TP MCCB -5Nos<br>63A 16kA TM TP MCCB -2Nos <br>25A 10kA C curve FP MCB -3Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC\ system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP MCCB 25kA - 1 nos<br>Busbar: Al busbar suitable for 125A<br>Outgoings:<br>40A 16kA TM TP MCCB -6Nos<br>63A 16kA TM TP MCCB -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP MCCB 25kA - 1 nos<br>Busbar: Al busbar suitable for 125A<br>Outgoings:<br>40A 16kA TM TP MCCB -6Nos<br>25A 10kA C curve FP MCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>UPS panel Incomer : 40A DP Isolator - 1 nos Busbar: Al busbar suitable for 40A <br>Outgoings: 25A 10kA C curve DP MCB -4No

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Pump panel<br>Incomer : RYB Indicators with control fuses - 1 set, ELR with CBCT - 1 nos, 63A TPN MCCB 16kA-1 no<br>Busbar: Al busbar suitable for 63A<br>Outgoings:<br>25A 10kA C curve FP MCB -4Nos<br>32A 10kA C curve FP MCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Lift Panel<br>Incomer: 63A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 63A<br>Outgoings: <br>40A FP 100mA RCBO - 1 nos, <br>25A DP 100mA RCBO - 1 nos, <br>6A 10kA SP MCB - 4 nos etc as required

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Dumbwaiter panel<br>Incomer: 40A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 40A<br>Outgoings: <br>40A FP 100mA RCBO - 1 nos, <br>25A DP 100mA RCBO - 1 nos, <br>6A 10kA SP MCB - 4 nos etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. SSB (Canteen block) <br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A 4P 25kA MCCB - 1 nos Busbar: Al busbar suitable for 125A Outgoings:<br>63A 16kA TP MCCB - 6Nos<br>63A 16kA TP MCCB with shunt trip-1Nos<br>40A 16kA TP MCCB -1Nos<br>63A FP Isolator -1 nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Incomer: RYB indicator with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 63A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 63A<br>Outgoings: <br>40A FP 100mA RCBO - 1 nos, <br>25A DP 30mA RCBO - 1 nos, <br>6A 10kA SP MCB - 4 nos etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Incomer 01: RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A 25kA FP Thermal Magnetic based MCCB- 1 nos<br>Busbar: Al busbar suitable for 125A<br>Outgoings:<br>63A 16kA TM FP MCCB -5Nos<br>40A 16kA TM FP MCCB -1Nos<br>63A FP Isolator - 1 nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra)<br>MSB (IAS block)<br>Incomer 01: RYB Indicators with control fuses - 2 set, Multi function meter with control fuses and CT- 1set, 250A 25kA FP Micro Processor based MCCB, 3O/C,1E/F,S/C releases with shunt trip coil and isolation duty- 1 nos, Class B/Class 1 SPD, 250A FP Contactor-1no, 250/5A CL 1 15VA CT for Y phase of APFC panel.<br>Incomer 02: RYB Indicators with control fuses - 2 set, Multi function meter with control CT- 1set, 250A 25kA FP Micro Processor based MCCB- 1 nos, 250A FP Contactor-1no.<br>AMF relay with electrical and mechanical interlock and its accessories including internal wiring<br>Busbar: Al busbar suitable for 250A Outgoings:<br>160A 25kA TM TPN MCCB -2Nos<br>125A 25kA TM TPN MCCB -4Nos<br>100A 25kA TM TPN MCCB -3Nos<br>80A 25kA TM TPN MCCB -1Nos<br>100A FP Isolator - 1 nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra)<br>MSB (IAS block)<br>Incomer 01: RYB Indicators with control fuses - 2 set, Multi function meter with control fuses and CT- 1set, 250A 25kA FP Micro Processor based MCCB, 3O/C,1E/F,S/C releases with shunt trip coil and isolation duty- 1 nos, Class B/Class 1 SPD, 250A FP Contactor-1no, 250/5A CL 1 15VA CT for Y phase of APFC panel.<br>Incomer 02: RYB Indicators with control fuses - 2 set, Multi function meter with control CT- 1set, 250A 25kA FP Micro Processor based MCCB- 1 nos, 250A FP Contactor-1no.<br>AMF relay with electrical and mechanical interlock and its accessories including internal wiring<br>Busbar: Al busbar suitable for 250A Outgoings:<br>160A 25kA TM TPN MCCB -2Nos<br>125A 25kA TM TPN MCCB -4Nos<br>100A 25kA TM TPN MCCB -3Nos<br>80A 25kA TM TPN MCCB -1Nos<br>100A FP Isolator - 1 nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC\ system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra)<br>UPS Panel<br>Incomer: 63A FP TM MCCB 16kA - 1 nos Busbar: Al busbar suitable for 63A<br>Outgoings: 40A 10kA C curve TP MCB - 1 nos, 25A 10kA C curve TP MCB - 7 nos, etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>UPS panel Incomer : 40A DP Isolator - 1 nos Busbar: Al busbar suitable for 40A <br>Outgoings: 25A 10kA C curve DP MCB -4No

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Pump panel<br>Incomer : RYB Indicators with control fuses - 1 set, ELR with CBCT - 1 nos, 63A TPN MCCB 16kA-1 no<br>Busbar: Al busbar suitable for 63A<br>Outgoings:<br>25A 10kA C curve FP MCB -1Nos<br>32A 10kA C curve FP MCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra)<br>Lift Panel 1, 2<br>Incomer: RYB indicator with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 63A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 63A Outgoings:<br>40A FP 100mA RCBO - 1 nos,<br>25A DP 30mA RCBO - 1 nos,<br>6A 10kA SP MCB - 4 nos etc as required

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra)<br>Utility Panel<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A 25kA FP TM MCCB - 1 nos Busbar: Al busbar suitable for 125A<br>Outgoings:<br>63A 16kA TM TPN MCCB -4Nos<br>40A 16kA TM TPN MCCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra)<br>AC Panel - 1 & 2<br>Incomer: RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 100A FP Isolator - 1 no<br>Busbar: Al busbar suitable for 100A Outgoings:<br>63A 25kA TM TPN MCCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA<br>sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor,<br>compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on<br>both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type<br>door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>MSB (IHRD block)<br>Incomer 01: RYB Indicators with control fuses - 2 set, Multi function meter with control fuses and CT- 1set, 250A 25kA FP Micro Processor based MCCB, 3O/C,1E/F,S/C releases with shunt trip coil and isolation duty- 1 nos, Class B/Class 1 SPD, 250A FP Contactor-1no, 250/5A CL 1 15VA CT for Y phase of APFC panel.<br>Incomer 02: RYB Indicators with control fuses - 2 set, Multi function meter with control CT- 1set, 250A 25kA FP Micro Processor based MCCB- 1 nos, 250A FP Contactor-1no.<br>AMF relay with electrical and mechanical interlock and its accessories including internal wiring<br>Busbar: Al busbar suitable for 250A Outgoings:<br>160A 25kA TM TPN MCCB -1Nos<br>125A 25kA TM TPN MCCB -3Nos<br>100A 25kA TM TPN MCCB -3Nos<br>80A 25kA TM TPN MCCB -3Nos<br>100A FP Isolator - 1 nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Utility Panel<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A 25kA FP TM MCCB - 1 nos<br>Busbar: Al busbar suitable for 125A Outgoings:<br>63A 16kA TM TPN MCCB - 4Nos<br>40A 16kA TM TPN MCCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>APFC Panel IHRD<br>Incomer: RYB indicator with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, , 8 stage APFC relay - 1 set, 160A 25kA FP TM MCCB - 1 nos<br>Busbar: Al busbar suitable for 160A Outgoings:<br>40A 16kA TP TM MCCB - 7 nos,<br>32A 25kA TP TM MCCB - 1 nos,<br>5kVAR Capacitor, 15kVAR Capacitor+capacitor duty contactor and detuned reactor - 1 Set, 10kVAR Capacitor+capacitor duty contactor and detuned reactor - 2 Set, 5kVAR Capacitor+capacitor duty contactor and detuned reactor - 1 Set, 3kVAR Capacitor+capacitor duty contactor and detuned reactor - 1 Set, 2kVAR Capacitor+capacitor duty contactor and detuned reactor - 1 Set etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.UPS Panel<br>Incomer: 63A FP TM MCCB 16kA - 1 nos Busbar: Al busbar suitable for 63A Outgoings:<br>40A 10kA C curve TP MCB - 1 nos,<br>25A 10kA C curve TP MCB - 7 nos, etc as required

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good thedamages colour washing etc. as required.<br>UPS panel<br>Incomer : 40A DP Isolator - 1 nos<br>Busbar: Al busbar suitable for 40A<br>Outgoings:<br>25A 10kA C curve DP MCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Pump panel<br>Incomer : RYB Indicators with control fuses - 1 set, ELR with CBCT - 1 nos, 63A TPN MCCB 16kA-1 no<br>Busbar: Al busbar suitable for 63A<br>Outgoings:<br>25A 10kA C curve FP MCB -1Nos<br>32A 10kA C curve FP MCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.Lift Panel 1, 2<br>Incomer: RYB indicator with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 63A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 63A Outgoings:<br>40A FP 100mA RCBO - 1 nos,<br>25A DP 30mA RCBO - 1 nos,<br>6A 10kA SP MCB - 4 nos etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>MSB (POLYTECHNIC Block) <br>Incomer 01: RYB Indicators with control fuses - 2 set, Multi function meter with control fuses and CT- 1set, 630A 4P 25kA MCCB, 3O/C,E/F,S/C releases with shunt trip coil & isolation duty- 1 nos, Class B/Class 1 SPD, 630A FP Contactor-1no, 630/5A CL 1 15VA CT for Y phase of APFC panel.<br>Incomer 02: RYB Indicators with control fuses - 2 set, Multi function meter with control fuse and CT- 1set, 630A 25kA 4P MCCB- 1 nos, Reverse power relay with control 630/5A 5P10 15VA CT-1no., 630A FP Contactor-1no<br>AMF relay with electrical and mechanical interlock and its accessories including internal wiring<br>Busbar: Al busbar suitable for 630A<br>Outgoings:<br>200A 25kA TM TP MCCB - 4Nos<br>320A 25kA TM TP MCCB -2Nos<br>160A 25kA TM TP MCCB -3Nos<br>125A 25kA TM TP MCCB -3Nos<br>200A FP Isolator - 1 nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>APFC Panel<br>Incomer: RYB indicator with control fuses - 1 set, Voltmeter meter with VSS and control fuse - 1 set, Ammeter with CT- 3 set, , 12 stage APFC relay - 1 set, 320A 25kA FP TM MCCB - 1 nos<br>Busbar: Al busbar suitable for 320A<br>Outgoings:<br>32A 16kA TP TM MCCB - 3 nos,<br>40A 16kA TP TM MCCB - 5 nos<br>63A 16kA TP TM MCCB - 4 nos<br>25kVAR Capacitor, 20kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 2 Set,15kVAR Capacitor+capacitor duty contactor and 7%detuned reactor - 1 Set, 10kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 5 Set, 5kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 3 Set etc as required

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required<br>Utility Panel<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP isolator - 1 nos<br>Busbar: Al busbar suitable for 125A<br>Outgoings:<br>80A 16kA TM TPN MCCB - 1Nos<br>63A 16kA TM TPN MCCB -3Nos<br>40A 16kA TM TPN MCCB -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Lift Panel 1, 2<br>Incomer: 63A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 63A<br>Outgoings: <br>40A FP 100mA RCBO - 1 nos, <br>25A DP 30mA RCBO - 1 nos, <br>6A 10kA SP MCB - 4 nos etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required<br>Fire Pump Panel<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 200A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 200A<br>Outgoings:<br>125A TP Isolator - 1Nos<br>40A TP Isolator -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Machine Sub Panel<br>Incomer : RYB Indicators with control fuses - 1 set, ELR with CBCT- 1set, Multi function meter with control fuses and CT - 1 set, 80AFPMCCB16kA - 1Nos Busbar: Albusbar suitable for 80A outgoings 32AFPMCB 10kA-11 Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>AC Panel - 1-BF<br>Incomer: RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 160A FP MCCB 16kA - 1 no<br>Busbar: Al busbar suitable for 160A<br>Outgoings:<br>63A 16kA TM TP MCCB - 4Nos<br>40A 16kA TM TP MCCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>AC Panel - 1-1F<br>Incomer: RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 160A FP MCCB 16kA - 1 no<br>Busbar: Al busbar suitable for 160A<br>Outgoings:<br>63A 16kA TM TP MCCB - 2Nos<br>40A 16kA TM TP MCCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>AC Panel - 1-2F<br>Incomer: RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 200A FP MCCB 25kA - 1 no<br>Busbar: Al busbar suitable for 200A<br>Outgoings:<br>63A 16kA TM TP MCCB - 4Nos<br>40A 16kA TM TP MCCB -3Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>AC Panel - 1-4F<br>Incomer: RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP MCCB 25kA - 1 no<br>Busbar: Al busbar suitable for 125A<br>Outgoings:<br>63A 16kA TM TP MCCB - 2Nos<br>40A 16kA TM TP MCCB -3Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>SSB Panel-1-BF<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 200A FP MCCB 25kA - 1 nos<br>Busbar: Al busbar suitable for 200A<br>Outgoings:<br>100A 16kA TM TP MCCB - 1Nos<br>80A 16kA TM TP MCCB -5Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>SSB Panel-1-2F<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 160A FP MCCB 25kA - 1 nos<br>Busbar: Al busbar suitable for 160A<br>Outgoings:<br>80A 16kA TM TP MCCB -5Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>UPS Main Panel<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 250A FP MCCB 25kA - 1 nos<br>Busbar: Al busbar suitable for 250A<br>Outgoings:<br>125A 16kA TM TPN MCCB - 1Nos<br>100A 16kA TM TPN MCCB -2Nos <br>63A 16kA TM TPN MCCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>UPS Panel 1<br>Incomer : RYB Indicators with control fuses - 1 set, 63A FP MCCB 16kA - 1 nos<br>Busbar: Al busbar suitable for 63A<br>Outgoings:<br>25A 10kA TP MCB -8Nos<br>25A 10kA SP MCB -3Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>UPS Panel 2<br>Incomer : RYB Indicators with control fuses - 1 set, 40A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 40A<br>Outgoings:<br>25A 10kA TP MCB -2Nos<br>40A 10kA SP MCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>UPS Panel 3<br>Incomer : RYB Indicators with control fuses - 1 set, 40A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 40A<br>Outgoings:<br>40A 10kA TP MCB -6Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>UPS Panel 4<br>Incomer : RYB Indicators with control fuses - 1 set, 125A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 125A<br>Outgoings:<br>40A 10kA TP MCB -4Nos<br>40A 10kA SP MCB -6Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>UPS panel Incomer : 40A DP Isolator - 1 nos Busbar: Al busbar suitable for 40A Outgoings: 25A 10kA C curve DP MCB -4Nos

OD: Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. MSB Incomer : RYB Indicators with control fuses - 2 set, Multi function meter with control fuses and CT- 1set, 320A 4P 25kA MCCB SET AT 320A,3O/C,E/F,S/C releases with shunt trip coil &amp; isolation duty- 1 nos, Class B/Class 1 SPD, 320/5A CL 1 15VA CT for Y phase of APFC panel. Busbar: Al busbar suitable for 320A. Outgoings: 200A 25kA TM TP MCCB -1No. 125A 25kA TM TP MCCB -4Nos. 160A 25kA TM TP MCCB -1Nos. Provision for fixing energy meter with control fuses and 200/5A CL 1 15VA CT- 1set. Provision for fixing energy meter with control fuses and 125/5A CL 1 15VA CT- 2set

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.t;APFC Panel ;Incomer: RYB indicator with control fuses - 1 set, Voltmeter meter with VSS and control fuse - 1 set, Ammeter with CT- 3 set, , 12 stage APFC relay - 1 set, 320A 25kA FP TM MCCB - 1 nos Busbar: Al busbar suitable for 320A Outgoings:;32A 16kA TP TM MCCB - 3 nos,;40A 16kA TP TM MCCB - 5 nos ;63A 16kA TP TM MCCB - 4 nos t;25kVAR Capacitor, 20kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 2 Set,15kVAR Capacitor+capacitor duty contactor and 7%detuned reactor - 1 Set, 10kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 5 Set, 5kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 3 Set etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Lift Panel 1, 2<br>Incomer: 63A FP Isolator - 1 nos<br>Busbar: Al busbar suitable for 63A<br>Outgoings: <br>40A FP 100mA RCBO - 1 nos, <br>25A DP 30mA RCBO - 1 nos, <br>6A 10kA SP MCB - 4 nos etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Incomer: RYB indicator with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, , 8 stage APFC relay - 1 set, 160A 25kA TPN TM MCCB - 1 nos<br>Busbar: Al busbar suitable for 160A<br Outgoings:<br>40A 16kA TP TM MCCB - 6 nos,<br>32A 16kA TP TM MCCB - 1 nos,<br>63A 16kA TP TM MCCB - 1 nos<br>7.5kVAR Capacitor, 20kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set,15kVAR Capacitor+capacitor duty contactor and 7%detuned reactor - 1 Set, 10kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set, 5kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set, 3kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set, 2kVAR Capacitor+capacitor duty contactor and 7% detuned reactor - 1 Set etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required."<br>"UPS Panel<br>Incomer : RYB Indicators with control fuses - 1 set, 40A DP Isolator - 1 nos<br>Busbar: Al busbar suitable for 40A<br>Outgoings:<br>25A 10kA DP MCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required."<br>"Fire Pump Panel<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control f u s e s a n d C T - 1 s e t , 2 0 0 A F P I s o l a t o r - 1 n o s < b r > B u s b a r : A l b u s b a r s u i t a b l e f o r 200A<br>Outgoings:<br>160A TP Isolator -1Nos<br>63A TP Isolator -2Nos<br>Star Delta starter for 75HP Motor-1No<br>Star Delta starter for 15HP Motor-1No <br>DOL starter for 7.5HP Motor-1No

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required."<br>"GSB<br>Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 400A 4P 25kA MCCB set at 350A with shunt trip - 1 nos, Reverse power relay with 200/5A 5P10 15VA CT-1no<br>Busbar: Al busbar suitable for 400A<br>Outgoings:<br>200A 25kA TM TP MCCB -1Nos<br>125A 25kA TM TP MCCB -4Nos<br>200A FP Isolator -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required."<br>SSB<br>Incomer: RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 200A 4P 25kA MCCB- 1 nos, <br>Busbar: Al busbar suitable for 200A<br>Outgoings:<br>80A 16kA TM TP MCCB - 4Nos<br>100A 16kA TM TP MCCB with shunt trip -1Nos<br>63A 16kA TM TP MCCB -3Nos<br>40A 16kA TM TP MCCB -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required."<br>"<br>MSB<br>Incomer1 : RYB Indicators with control fuses - 2 set, Multi function meter with control fuses and CT- 1set, 320A 4P 25kA MCCB SET AT 320A,3O/C,E/F,S/C releases with shunt trip coil & isolation duty- 1 nos, Class B/Class 1 SPD, 320/5A CL 1 15VA CT for Y phase of APFC panel.<br>Incomer 2 : RYB Indicators with control fuses - 2 set, Multi function meter with control fuses and CT- 1set, 400A 4P 25kA MCCB SET AT 350A-1 No, Reverse power relay with 400/5A 5P10 15VA CT-1no.<br>400A FP Contactor-2 NoS<br>AMF relay with electrical and mechanical interlock and itsaccessories including internal wiring<br>Busbar: Al busbar suitable for 400A<br>Outgoings:<br>200A 25kA TM TP MCCB -1No<br>125A 25kA TM TP MCCB -4Nos<br>160A 25kA TM TP MCCB - 4Nos<br>200A FP Isolator -1 No<br>Duel source check meter with control fuses and 200/5A CL 1 15VA CT- 1set<br>Duel source check meter with control fuses and 125/5A CL 1 15VA CT- 2set<br>Duel source check meter with control fuses and 160/5A CL 1 15VA CT- 1set

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it a n d m a k i n g g o o d t h e d a m a g e s c o l o u r w a s h i n g e t c . a s r e q u i r e d . < b r > S T P P a n e l AUDITORIUM<br>Incomer : RYB Indicators with control fuses - 1 set, ELR with CBCT - 1 nos, 80A TPN MCCB 16kA-1 no<br>Busbar: Al busbar suitable for 80A<br>Outgoings:<br>40A 10kA C curve FP MCB -2Nos<br>25A 10kA C curve FP MCB -10Nos<br>25A 10kA C curve DP MCB -8Nos<br>16A 10kA C curve DP MCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Utility Panel Auditorium<br>Incomer RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 160A 4P MCCB isolator- 1 nos, <br>Busbar: Al busbar suitable for 160A<br>Outgoings:<br>80A 16kA TM TP+N MCCB -5Nos<br>63A 16kA TM TP+N MCCB -1Nos<br>40A 16kA TM TP MCCB -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Pump panel-Common<br>Incomer : RYB Indicators with control fuses - 1 set, ELR with CBCT - 1 nos, 63A TPN MCCB 16kA-1 no<br>Busbar: Al busbar suitable for 63A<br>Outgoings:<br>40A 10kA C curve FP MCB -3Nos<br>32A 10kA C curve FP MCB -1Nos<br>25A 10kA C curve FP MCB -7Nos<br>25A 10kA C curve DP MCB - 1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.<br>Pump panel-Auditorium<br>Incomer RYB Indicators with control fuses - 1 set, ELR with CBCT - 1 nos, 63A TPN MCCB 16kA-1 no<br>Busbar: Al busbar suitable for 63A<br>Outgoings:<br>25A 10kA C curve FP MCB -4Nos<br>32A 10kA C curve FP MCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.&lt;br&gt;Utility Panel;Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP Isolator - 1 nos ;Busbar: Al busbar suitable for 125A ;Outgoings:;80A 16kA TM TPN MCCB -1Nos ;63A 16kA TM TPN MCCB -3Nos ;40A 16kA TM TPN MCCB -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;Lift Panel 1, 2;Incomer: 63A FP Isolator - 1 nos;Busbar: Al busbar suitable for 63A;Outgoings: ;40A FP 100mA RCBO - 1 nos, 25A DP 30mA RCBO - 1 nos, t;6A 10kA SP MCB - 4 nos etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;Dumbwaiter Panel Incomer: RYB indicator with control fuses - 1 set, 40A FP Isolator - 1 nos ;Busbar: Al busbar suitable for 40A ;Outgoings: &lt;br&gt;25A FP 100mA RCBO - 1 nos, ;16A DP 30mA RCBO - 1 nos, ;6A 10kA SP MCB - 2 nos etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.UPS PanelIncomer: 63A FP TM MCCB 16kA - 1 nosBusbar: Al busbar suitable for 63AOutgoings: 63A 10kA C curve TP MCB - 1 nos, 40A 10kA C curve TP MCB - 1 nos, 25A 10kA C curve TP MCB - 6 nos, etc as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.t;SSB Panel-1- LGF-1;Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 250A FP 25kA MCCB - 1 nos;Busbar: Al busbar suitable for 250A ;Outgoingst;63A 16kA TM TP MCCB -6Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;Floor Panel-1A-GF;Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 200A FP Isolator - 1 nos t;Busbar: Al busbar suitable for 200A;Outgoings:t;80A 16kA TM TP MCCB -2Nos;63A 16kA TM TP MCCB -2Nos;40A 16kA TM TP MCCB -3Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.&;Floor Panel-1B-GF;Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 200A FP Isolator - 1 nos;Busbar: Al busbar suitable for 200At;Outgoings;63A 16kA TM TP MCCB -6Nos;40A 16kA TM TP MCCB -1Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;Floor Panel-2-FF;Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP Isolator - 1 nos;Busbar: Al busbar suitable for 125A;Outgoings:;63A 16kA TM TP MCCB -3Nos;40A 16kA TM TP MCCB -3Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;Floor Panel-3-SF;Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 160A FP Isolator - 1 nos;Busbar: Al busbar suitable for 160A;Outgoings:;63A 16kA TM TP MCCB -5Nos;40A 16kA TM TP MCCB -3Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;Floor Panel-4A;Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP Isolator - 1 nos;Busbar: Al busbar suitable for 125A ;Outgoings;63A 16kA TM TP MCCB -2Nos&lt;br&gt;40A 16kA TM TP MCCB -3Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;Floor Panel-4B;Incomer : RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 125A FP Isolator - 1 nos;Busbar: Al busbar suitable for 125A;Outgoings:;63A 16kA TM TP MCCB -3Nost;40A 16kA TM TP MCCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;UPS panel;Incomer : 40A DP Isolator - 1 nos;Busbar: Al busbar suitable for 40A;Outgoings:;25A 10kA C curve DP MCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 2mm for enclosure and load bearing particles and 1.6mm thick CRCA sheet for internal particles, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated(7 tank treatment), indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required.;Pump panel;Incomer : RYB Indicators with control fuses - 1 set, ELR with CBCT - 1 nos, 63A TPN MCCB 16kA-1 no;Busbar: Al busbar suitable for 63A Outgoings:25A 10kA C curve FP MCB -4Nos;32A 10kA C curve FP MCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra) Feeder pillar 1(IP55 with canopy)<br>Incomer: 25A DP RCCB 30mA-1nos, 25A 10kA C Curve DP MCB - 1 nos, RYB indicator with control fuses - 1 set, contactor - 3 nos, Timer- 1set<br>Outgoings: 6A 10kA C Curve SP MCB - 6 nos and all necessary accessories as required.

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra) UPS Emergency Light Panel<br>Incomer : 40A DP isolator - 1 nos<br>Busbar: Al busbar suitable for 40A<br>Outgoings:<br>25A 10kA C curve DP MCB -4Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mmthick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powdercoated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz ACsystem with busbars extendable on both sides, including internal wiring with suitable size wires, rotaryhandle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing itand making good the damages colour washing etc. as required. Comprising the following: (Specificationas per the submitted schematic drawing, any changes as per the recommendations from KSEBL/Electrical inspectorate will be charged extra) Lift Panel 1, 2,3<br>Incomer: RYB indicator with controlfuses - 1 set, Multi function meter with control fuses and CT- 1set, 63A FP Isolator - 1 nos<br>Busbar: Albusbar suitable for 63A<br>Outgoings: <br>40A FP 100mA RCBO - 1 nos, <br>25A DP 30mA RCBO - 1 nos, <br>6A 10kA SP MCB - 4 nos etc as required."<br>

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mmthick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powdercoated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz ACsystem with busbars extendable on both sides, including internal wiring with suitable size wires, rotaryhandle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing itand making good the damages colour washing etc. as required. Comprising the following: (Specificationas per the submitted schematic drawing, any changes as per the recommendations from KSEBL/Electrical inspectorate will be charged extra) Utility Panel<br>Incomer : RYB Indicators with control fuses- 1 set, Multi function meter with control fuses and CT- 1set, 100A FP Isolator - 1 nos<br>Busbar: Albusbar suitable for 125A<br>Outgoings:<br>63A 16kA TM TPN MCCB -3Nos<br>40A 16kA TM TPN MCCB -2Nos

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing it and making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/Electrical inspectorate will be charged extra) Metering Panel <br>Incomer: RYB Indicators with control fuses - 1 set, Multi function meter with control fuses and CT- 1set, 40A FP Isolator - 1 no<br>Busbar: Al busbar suitable for 160A<br>Outgoings:<br>25A 10kA DP MCB with Duel source energy meter - 6Nos<br>25A 10kA DP MCB with provision Duel source energy meter -1No

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mm thick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powder coated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz ACsystem with busbars extendable on both sides, including internal wiring with suitable size wires, rotaryhandle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing itand making good the damages colour washing etc. as required. Comprising the following: (Specification as per the submitted schematic drawing, any changes as per the recommendations from KSEBL/ Electrical inspectorate will be charged extra)<br>External lighting panel<br>Incomer: RYB indicator withcontrol fuses - 1 set, Multi function meter - 1 nos, 80/5A CL 1 15VA CT - 1 set, 80A 16kA FP MCCB - 1 nos<br>Outgoing: 40A 16kA TPN MCCB - 7 nos etc as required.

OD : Supply, installation, testing and commissioning of outdoor floor mounting feeder pillar panel made ofGlass Reinforced Plastic (GRP). The Degree of Ingress Protection IP 66, impact protection shall beIK10.The feeder pillar shall be comprising of the following and shall be fully wired asper latest electricalstandards with hot dipped MS canopy, MS mounting frame and all necessary accessories, ready to use(Make: Cape or equivalent)<br>Feeder pillar 3<br>Incomer: 40A 10kA C Curve FP MCB - 1 nos, RYBindicator with control fuses - 1 set, TVSS with control fuses - 1 set.<br>Sub incomer: 25A 30mA DPRCCB - 3 nos, 32A DP contactor - 3 nos, Timer- 3 nos.<br>Outgoings: 16A 10kA C Curve SP MCB - 3nos, 10A 10kA C Curve SP MCB - 29 nos and all necessary accessories as required

OD : Supply, installation, testing and commissioning of outdoor floor mounting feeder pillar panel made ofGlass Reinforced Plastic (GRP). The Degree of Ingress Protection IP 66, impact protection shall beIK10.The feeder pillar shall be comprising of the following and shall be fully wired asper latest electricalstandards with hot dipped MS canopy, MS mounting frame and all necessary accessories, ready to use(Make: Cape or equivalent)<br>Feeder pillar 4<br>Incomer: 40A 10kA C Curve FP MCB - 1 nos, RYBindicator with control fuses - 1 set, TVSS with control fuses - 1 set.<br>Sub incomer: 25A 30mA DPRCCB - 3 nos, 32A DP contactor - 3 nos, Timer- 3nos.<br>Outgoings: 16A 10kA C Curve SP MCB - 2nos, 10A 10kA C Curve SP MCB - 18 nos, 16A 10kA C Curve TP MCB - 2 nos and all necessaryaccessories as required.

OD : Supply, installation, testing and commissioning of outdoor floor mounting feeder pillar panel made ofGlass Reinforced Plastic (GRP). The Degree of Ingress Protection IP 66, impact protection shall beIK10.The feeder pillar shall be comprising of the following and shall be fully wired asper latest electricalstandards with hot dipped MS canopy, MS mounting frame and all necessary accessories, ready to use(Make: Cape or equivalent)<br>Feeder pillar 5<br>Incomer: 40A 10kA C Curve FP MCB - 1 nos, RYBindicator with control fuses - 1 set, TVSS with control fuses - 1 set.<br>Outgoings: 16A 10kA C Curve TPMCB - 6 nos and all necessary accessories as required

OD : Supply, installation, testing and commissioning of outdoor floor mounting feeder pillar panel made ofGlass Reinforced Plastic(GRP). The Degree of Ingress Protection IP 66, impact protection shall beIK10.The feeder pillar shall be comprising of the following and shall be fully wired asper latest electricalstandards with hot dipped MS canopy, MS mounting frame and all necessary accessories, ready to use(Make: Cape or equivalent)<br>Feeder pillar 1<br>Incomer: 40A 10kA C Curve FP MCB - 1 nos, RYBindicator with control fuses - 1 set, TVSS with control fuses - 1 set.<br>Sub incomer: 25A 30mA DPRCCB - 3 nos, 32A DP contactor - 3 nos, Timer- 3 nos.<br>Outgoings: 16A 10kA C Curve SP MCB - 12nos, 10A 10kA C Curve SP MCB - 32 nos and all necessary accessories as required.

OD : Supply, installation, testing and commissioning of outdoor floor mounting feeder pillar panel made ofGlass Reinforced Plastic (GRP). The Degree of Ingress Protection IP 66, impact protection shall beIK10.The feeder pillar shall be comprising of the following and shall be fully wired asper latest electricalstandards with hot dipped MS canopy, MS mounting frame and all necessary accessories, ready to use(Make: Cape or equivalent)<br>Feeder pillar 2<br>Incomer: 40A 10kA C Curve FP MCB - 1 nos, RYBindicator with control fuses - 1 set, TVSS with control fuses - 1 set.<br>Sub incomer: 25A 30mA DPRCCB - 3 nos, 32A DP contactor - 3 nos, Timer- 3 nos.<br>Outgoings: 16A 10kA C Curve SP MCB - 3nos, 10A 10kA C Curve SP MCB - 29 nos, 16A 10kA C Curve TP MCB-2 nos and all necessaryaccessories as required

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mmthick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powdercoated, indoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50Hz ACsystem with busbars extendable on both sides, including internal wiring with suitable size wires, rotaryhandle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing itand making good the damages colour washing etc. as required.<br>UPS panel for 30 kVAUPS<br>Incomer: 80A FP MCCB 16kA -1 no<br>Busbar: Al busbar suitable for 80A<br>Outgoings: 25AC curve SP MCB -3 nos, 25A C curve TP MCB -4 nos, 63A C curve TP MCB-1 no

OD : Fabrication, supply, installation, testing and commissioning of cubicle construction made out of 1.6mmthick CRCA sheet, totally enclosed, free standing, wall/floor mounting, dust and vermin proof, powdercoated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz ACsystem with busbars extendable on both sides, including internal wiring with suitable size wires, rotaryhandle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket etc. including fixing itand making good thedamages colour washing etc. as required. Comprising the following: (Specificationas per the submitted schematic drawing, any changes as per the recommendations from KSEBL/Electrical inspectorate will be charged extra) OAT Panel <br>Incomer: RYB Indicators with control fuses -1 set, Multi function meter with control fuses and CT- 1set, 160A FP MCCB Isolator - 1 no<br>Busbar: Albusbar suitable for 160A<br>Outgoings:<br>100A 16kA TM TPN MCCB -1No<br>80A 16kA TM TPNMCCB -2Nos<br>63A 16kA TM TPN MCCB -1No<br>63A 16kA TM TPN MCCB -1No<br>25A 10kA DP MCB -1No

OD : Supply, installation, testing and commissioning of outdoor floor mounting feeder pillar panel made of Glass Reinforced Plastic (GRP). The Degree of Ingress Protection IP 66, impact protection shall beIK10.The feeder pillar shall be comprising of the following and shall be fully wired asper latest electrical standards with hot dipped MS canopy, MS mounting frame and all necessary accessories, ready to use Feeder pillar 1<br>Incomer: 40A 10kA C Curve FP MCB - 1 nos, RYBindicator with control fuses - 1 set, TVSS with control fuses - 1 set.<br>Sub incomer: 25A 30mA DPRCCB - 3 nos, 32A DP contactor - 3 nos, Timer- 3 nos.<br>Outgoings: 16A 10kA C Curve SP MCB - 12 nos, 10A 10kA C Curve SP MCB - 32 nos and all necessary accessories as required.

OD : Supply and fixing of laying copper bonded steel solid round conductor 10mm diameter having 78 sqmm cross sectional area from earth electrode directly in ground as required. copper coated steel, high corrosion resistant. Meets the requirement of (IS/IEC 62305) copper coating thickness of 100microns Should be tested and use exclusively for earthing, lightning protection earthing system and ring equipotential bonding. Govt Approved Test Reports Required. Vertical Riser Outside Structure for PME

OD : Supply and fixing of laying copper bonded steel solid round conductor 10mm diameter having 78 sqmm cross sectional area from earth electrode directly in ground as required. copper coated steel, high corrosion resistant. Meets the requirement of (IS/IEC 62305) copper coating thickness of 100microns Should be tested and use exclusively for earthing, lightning protection earthing system and ring equipotential bonding. Govt Approved Test Reports Required. For Ring Earthing needs to be installed 0.5 meter from earth. Each under ground joints has to be wrapped with petrolatum- coated chemical fibre fabric having 1.1mm thick and width 50mm.

OD : Supply and fixing of laying copper bonded steel solid round conductor 10mm diameter having 78 sqmm cross sectional area from earth electrode directly in ground as required. copper coated steel, high corrosion resistant. Meets the requirement of (IS/IEC 62305) copper coating thickness of 100microns Should be tested and use exclusively for earthing, lightning protection earthing system and ring equipotential bonding. Govt Approved Test Reports Required.<br>Inside Structure for the formation of MAT & Vertical Riser Inside Structure this has to be installed with bonding clamp @ every 3 meters tested as per IS/IEC 62305.Interconnecting round conductor and reinforcement inside the concrete for structural earthing system. <br>Clamp materials has to be made of Mild Steel / Stainless Steel/ Copper Coated Steel ; Galvanised Steel Clmaps not Permitted based on Clause E.4.3.4 of IS 62305.

OD : Supply and fixing of laying copper bonded steel solid round conductor 10mm diameter having 78 sqmm cross sectional area from earth electrode directly in ground as required. copper coated steel, high corrosion resistant. Meets the requirement of (IS/IEC 62305) copper coating thickness of 100microns Should be tested and use exclusively for earthing, lightning protection earthing system and ring equipotential bonding. Govt Approved Test Reports Required.Inside Structure for the formation of MAT &amp; Vertical Riser Inside Structure this has to be installed with bonding clamp @ every 3 meters tested as per IS/IEC 62305.Interconnecting round conductor and reinforcement inside the concrete for structural earthing system. Clamp materials has to be made of Mild Steel / Stainless Steel/ Copper Coated Steel ;Galvanised Steel Clmaps not Permitted based on Clause E.4.3.4 of IS 62305. (Ecnomic application using mild steel of 10mm)

OD : Installation of exothermic weld joints for 10mm round copper bonded steel conductor having 100 microns or 25x3mm pure solid tape copper conductor as per IS/IEC 62305. Govt approved Indian labs test certificate required.

OD : Providing & fixing of Stainless Steel Straight Connectors for straight Joints if required. Govt approved Indian labs test certificate required.

OD : Supply and fixing of copper bonded steel solid tape conductor 14.2mm having 158Sq mm cross sectional area . copper coated steel, high corrosion resistant. Meets the requirement of (IS/IEC 62305) copper coating thickness of 250microns Should be tested and use exclusively for lightning protection earthing system and ring equipotential bonding. This has to be installed with bonding clamp @ every 1 meterstested as per IS/IEC 62305. Clamp materials has to be made of Mild Steel / Stainless Steel/ Copper Coated Steel ; Galvanised Steel Clmaps not Permitted based on Clause E.4.3.4 of IS 62305. Needs to be installed in high fault level areas to form MAT inside structure. Govt approved Indian labs test certificate required.

OD : Supply and fixing of copper bonded steel solid tape conductor 17.2mm having 232Sq mm cross sectional area . copper coated steel, high corrosion resistant. Meets therequirement of (IS/IEC 62305) copper coating thickness of 250microns Should be tested and use exclusively for lightning protection earthing system and ring equipotential bonding. This has to be installed with bonding clamp @ every 1 meters tested as per IS/IEC 62305.Interconnecting round conductor and reinforcement inside the concrete for structural earthing system. Clamp materials has to be made of Mild Steel / Stainless Steel/ Copper Coated Steel ; Galvanised Steel Clmaps not Permitted based on Clause E.4.3.4 of IS 62305. Needs to be installed in high fault level areas to form MAT inside structure. Govt approved Indian labs test certificate required.

OD : Installation Exothermic Weld Joints for 17.2mm/14.2mm round copper bonded steel conductor having 250 microns as per IS/IEC 62305 based on fault current. Govt approved Indian labs test certificate required.

OD : Supply and providing of exothermic weld joints for 10mm round copper bonded steel conductor having 100 microns as per IS/IEC 62305 for ring earthing & exothermic weld joints for 20mm rod to 10mm round copper bonded steel conductor having 100 microns for down conductor to pit joints. Each under ground joints has to be wrapped with petrolatum- coated<br>chemical fibre fabric having 1.1mm thick and width. 50mm.

OD : Supply and fixing of copper coated steel solid round conductor 10mm diameter from earth electrode directly in ground as<br>required. copper coated steel, high corrosion resistant. Meets the requirement of copper coating thickness of 100microns Should be tested and use exclusively for lightning protection earthing system and ring equipotential bonding. After test<br>link needs to be routed inside heavy dutyconduit to avoid touch potential till ground level.

OD : Supply and fixing of earth studs made of Stainless Steel tested as per IS/IEC 62305 having minimum dimension 40x40 for Lightning Protection application. Earth stud with connecting accessories inside the concrete - ( Earth stud + Bonding Clamp + Connecting Point + Green cover). Govt approved Indian labs test certificate required. Govt approved Indian labs test certificate required.

OD : Providing &amp; fixing of earth studs made of Stainless Steel tested as per IS/IEC 62305 having minimum dimension 70x70 for General Earthing application. This has to be connected to equipotential bonding rail to take multiple connection. Earth stud with connecting accessories inside the concrete - ( Earth stud + Bonding Clamp + Connecting Point + Green cover). Govt approved Indian labs test certificate required.

OD : Supply and fixing of earth studs made of Stainless Steel with light duty equipotential bonding bar tested as per IS/IEC 62305 having minimum dimension 70x70 for General Earthing application. This has to be connected to equipotential bonding rail to take multiple connection. Earth stud with connecting accessories inside the concrete - ( Earth stud+Bonding Clamp + Connecting Point+ Equipotential Bonding Rail + Green cover). Govt approved Indian labs test certificate required.

0D : Supply and fixing of earth studs made of Stainless Steel with heavy duty equi potential bonding bar tested as per IS/IEC 62305 having minimum dimension 70x100 for Body Earthing of Panel, Transformer, DG application. Minimum 3 connections to structural steel Required. This has to connected to heavy duty Stainless steel bonding rail to take multiple connection. Earth stud with connecting accessories inside the concrete - ( Earth stud + 3 nos of Bonding clamp + Equipotential Bonding Rail Heavy Duty+ Green cover). Govt approved Indian labs test certificate required.

OD : Supply and fixing of earth studs made of Stainless Steel tested as per IS/IEC 62305 having minimum dimension 80x150 for Neutral Earthing of Transformer, DG application. Minimum 5 connections to structural steel Required. Earth stud with connecting accessories inside the concrete - ( Earth stud + 5 nos of Bonding clamp + Green cover). Govt approved Indian labs test certificate required.

OD : Earthing with G.I. earth pipe 2.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

OD : Providing and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3 For 1,2,3, 4 meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod: For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal.Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect horizontal air termination to vertical airtermination;Lightning tested for 100 KA 10/350 micro sec waveform. This is required if using17 KG stone supports. Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level ofstability is required to mount 1,2,3,4 meters. No of concrete stones/wall clamps depending on wind loadneeds to be considered. For 6 & 8 meter air terminalfor mounting: tripod stand or 3 nos & 4 nosrespectively wall clamp will be required to withstand heavy wind load. Govt approved Indian labs testcertificate required. 2 meter air terminal with Interception Tip mounted on Stainless Steel Wall Clamp mounting accessories

OD : Supply and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3 .For 1,2,3, 4 meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod:t;For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm ;Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal.Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect horizontal air termination to vertical air termination;Lightning tested for 100 KA 10/350 micro sec waveform. This is required if using 17 KG stone supports. Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of stability is required to mount 1,2,3,4 meters. No of concrete stones/wall clamps depending on wind load needs to be considered. For 6 &amp; 8 meter air terminalfor mounting: tripod stand or 3 nos &amp; 4 nos respectively wall clamp will be required to withstand heavy wind load. Govt approved Indian labs test certificate required.3 meter air terminal with Interception Tip mounted on Stainless Steel Wall Clamp mounting accessories

OD : Supply and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3 .For 1,2,3, 4 meter air terminal 16mm rod tapered to 10 mm &lt;br&gt;aluminium rod meter rod;For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm ;Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load.;All air terminal must have Interception Tip at the Top of air terminal.;Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect horizontal air termination to vertical air termination;Lightning tested for 100 KA 10/350 micro sec waveform. This is required if using 17 KG stone supports.Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of stability is required to mount 1,2,3,4 meters. No of concrete stones/wall clamps depending on wind load needs to be considered. For 6 &; 8 meter air terminalfor mounting: tripod stand or 3 nos &amp; 4 nos respectively wall clamp will be required to withstand heavy wind load. Govt approved Indian labs test certificate required.4 meter air terminal with Interception Tip mounted on Stainless Steel Wall Clamp mounting accessories

OD : Supply and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3 .For 1,2,3, 4 meter air terminal 16mm rod tapered to 10 mm <br>aluminium rod meter rod: <br>For 6, 8 meter40mm rod tapered to 16mm and then to 10mm <br>Meets the requirement (IS/IEC 62305) <br>Semi-hard (E-AlMgSiO5) Suitable for high wind load. <br>All air terminal must have Interception Tip at the Top of air terminal. <br>Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect horizontalair termination to vertical air termination;Lightning tested for 100 KA 10/350 micro sec <br>waveform.This is required if using 17 KG stone supports. <br>Stainless Steel Wall Clamp or 17 KG stone of 365mm diameter, high level of stability is required to mount 1,2,3,4 meters. No of concrete stones/wallclamps depending on wind load needs to be considered. For 6 & 8 meter air terminalfor mounting: tripod stand or 3 nos & 4 nos respectively wall clamp will be required to withstand heavy wind load. Govtapproved Indian labs test certificate required.6 meter air terminal with Interception Tip mounted on Stainless Steel Wall Clamp mounting accessories

OD : Supply and fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi-hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required.Conductor with Parapet Holder made of whether resistant plastic holder @ every 0.5 meters

OD : Providing &amp; fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required.Conductor with Down Conductor Holder made of whether resistant plastic holder @ every 0.75 meters

OD : Supply and fixing Cross Connector/T Connector/Folding Clamp/Clamping Shoe/ Expansion Piece with Connector: to route vertical down conductor /mesh formation made of Aluminium Ferrule using screw free joints. Folding Clamp/Clamping Shoe for metal panels (up to 20mm thickness of the metal frame): Folding clamp/clamping shoe for metal frame thickness up to 20mm, made of stainless steel SS 304/316 grade , conforms to the requirements according to (IS/IEC 62305). Expansion piece with connector: Forequalisingtemperature related length changes. Necessary on conductors length at every 20 meters horizontally. Using round conductor 8mm aluminium conductor with straight Connector: using Aluminium Ferrule. Quick installation using crimp joints. Conforms to the requirements according to (IS/IEC 62305). Make sure all joints are strong and will be inspected at site. Galvanised Iron joints are not permitted to avoid risk of corrosion. Single bolt joints are not permitted to avoid risk of faulty loose joints and reduce risk of flash over. Govt approved Indian labs test certificate required

OD : Supply and fixing of Stainless Steel Test Joint suitable with suitable Outdoor Enclosure: For 8mm dia solid round<br>aluminium conductor & 10mm dia copper coated solid steel round conductor having 100 microns of copper bonding . Conforms to the requirements according to (IS/IEC 62305).The enclosure should be outdoor glass-fibre reinforced<br>polycarbonate opaque having minimum inner dimension of 75mm x 75 mm x 50 mm. The test link has to be straight and<br>needs minimum 4 mounting screws for strong joints. Inspection of bimetallic corrosion at site required. Separation of<br>8mm Aluminium & 10mm Copper bonded steel is required for future inspection and contractor has to make sure both<br>conductors should not touch each other to avoid bimetallic corrosion. Single bolt joints are not permitted.

OD : Providing and fixing of maintenance free Earthing system comprises of molecularly bonded copper of 99.9% purity on low carbon steel of min 3048mm length (10 feet), having a diameter of 20mm with copper bonding thickness of 250 microns as per UL 467. The Rod has to be either continuous or with self coupling peg &amp; bore arrangement with fault current withstand capability of 30 KA rms value for 1 second and I peak of 76 KA. The rod must be having corrosion test, peel off test for uniform coating, 180 degree bend test with out peeloff of copper bonding. Exothermic welded Clamp for clamping as suggested as per NBC 2016. Ordinary Stainless steel/Copper alloy universal clamps are not recommended. For self coupling peg &amp; bore arrangement rod needs Impact point on the bottom rod for easy insertion. Earth enhancing mineral compound is used for improving the soil conductivity. The material shall be mineral inert to sub soil and shall not pollute the environment and non corrosive to earth rod. The material should have a resistivity less than 0.2 &Omega;m. It should be free from hazardous substances. The mineral compound is required to have minimum 17.5 Kg of the total composite. The compound should be chemically inert and needs to submit Govt approved Indian labs test certificate. Concrete Earth electrode inspection chamber with weight bearing capacity of 30KN. The dimension shall be 320mmx 320mmx 90mm. Govt approved Indian labs test certificate required.

OD : Supplying and providing of maintenance free earthing system comprises of molecularly bonded copper of 99.9% purity on low carbon steel of min 3048mm length (10 feet), having a diameter of 20mm with copper bonding thickness of 250 microns. The Rod has to be either continuous or with self-coupling peg & bore arrangement with fault current withstand capability of 30 kA rms value for 1 second and I peak of 76 kA. The rod must be having corrosion test, peel off test for uniform coating, 180 degree bend test with out peel off of copper bonding. Exothermic welded clamp for clamping as suggested as per NBC 2016. Ordinary stainless steel/Copper alloy universal clamps are not recommended. For self coupling peg & bore arrangement rod needs Impact point on the bottom rod for easy insertion. Earth enhancing mineral compound is used for improving the soil conductivity. The material shall be mineral inert to sub soil and shall not pollute the environment and non corrosive to earth rod. The material should have a resistivity less than 0.2 m. It should be free from hazardous substances. The mineral compound is required to haveminimum 17.5 Kg of the total composite. The compound should be chemically inert. Concrete earth electrode inspection chamber with weight bearing capacity of 30kN. The dimension shall be 320mmX 320mmX 190mm.

OD : Supply, Installation Testing and commissioning of 8 Passenger Machine Room less Lift with the following specifications including all required standard Features.<br>1. Type of Lift: Passenger lift(8 passenger)<br>2. Method of control Micro processor based V3F with ARD system. <br>3. Load/Person:544kg/8 persons<br>4. Rated Speed in m/s: 1.00 m/s<br>5. Car Travel: 23.1 m approx<br>6. No. of Floors Served: Eight<br>7. Overhead: 4000mm<br>8. Pit height: 1500mm<br>9. Operation: Simplex FullCollective Control<br>10. Hoist w ay Required: 1900mm wide x 2150mm deep<br>11. Hoist wayEntrance: Two panel to left opening Panel <br>12. Car dimensions: As per OEM standard<br>13. Doordimension s: 900 mm wide x 2000 mm internal height<br>12. Power supply: 415volts, 3 phase, 50Hz, AC regulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting, round/square LED (CL60) StainlessSteel Round/Square spot LED light<br>14. Car flooring: Stainless steel 6 mm anti skid flooring: Stainlesssteel Hairline.<br>15. Car operating panel: Full Height Stainless Steel Face Plate Silver brushed Segmented LCD display Square flush mounted & Automatic Rescue Device Provide automatic rescuedevice with an electronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescue operation should act within 10 seconds of power failure <br>16. Landing Signalization-Stainless Steel 7 segment display F lush Mounted Silver brushed SquareFeatures included1. Car Emergency Light2. Fireman Drive3. Curtain of Light 169 Beams4. Accurate Relevelling5. Automatic, Closed Door6. Emergency Rescue Device with audio announcer7. 2 Way Dedicated Intercom8. Nudging service9. Attendant Service10. Doors closed11. Round/square spot LED light.Guarantee - company shall carry out free maintenance during warranty period which includes 1. Servicing Lift once in month, Cleaning lift equipment 2. Lubricating all required machinery / equipment 3. Replacing of Lubricating Oil when required 4. Replacing fuse-able items, alarm etc . 5. Recharging /replacing batteries in case of such requirements 6. Replacing / Rewinding motor, Replacing suspension rope if required 7. Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevant IS to be carried out before Handing over. Scope of work:- a) Supply of lift materials &amp; installationb) Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. Supply of book let with complete details of maintenance schedule and control diagram. g) Giving training to department staff for attending trouble shooting h) Free servicing for 36months after handing over.

OD : Supply, Installation Testing and commissioning of 8 Passenger Machine Room less Lift with the following specifications including all required standard Features.<br>1. Type of Lift: Passenger lift(8 passenger)<br>2. Method of control Micro processor based V3F with ARD system. <br>3. Load/Person:544kg/8 persons<br>4. Rated Speed in m/s: 1.00 m/s<br>5. Car Travel: 23.1 m approx<br>6. No. of Floors Served: Eight<br>7. Overhead: 4000mm<br>8. Pit height: 1500mm<br>9. Operation: Simplex FullCollective Control<br>10. Hoist way Required: 1900mm wide x 2150mm deep<br>11. Hoist way Entrance: Two panel to left opening Panel <br>12. Car dimensions: As per OEM standard<br>13. Doordimensions: 900 mm wide x 2000 mm internal height<br>12. Power supply: 415volts, 3 phase, 50Hz, AC regulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting, round/square LED (CL60) Stainless Steel Round/Square spot LED light<br>14. Car flooring: Stainless steel 6 mm anti skid flooring: Stainless steel Hairline.<br>15. Car operating panel: Full Height Stainless Steel Face Plate Silver brushedSegmented LCD display Square flush mounted & Automatic Rescue Device Provide automatic rescuedevice with an electronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries.The rescue operation should act within 10 seconds of power failure <br>16. Landing Signalization-Stainless Steel 7 segment display Flush Mounted Silver brushed Square Features included1. Car Emergency Light2. Fireman Drive3. Curtain of Light 169 Beams4. Accurate Relevelling5. Automatic, Closed Door6. Emergency Rescue Device with audio announcer7. 2 Way Dedicated Intercom8. Nudging service9. Attendant Service10. Doors closed11. Round/square spot LED light.Guarantee - company shall carry out free maintenance during warranty period which includes 1. Servicing Lift once in month, Cleaning lift equipment 2. Lubricating all required machinery / equipment 3. Replacing of Lubricating Oil when required 4. Replacing fuse-able items, alarm etc . 5. Recharging /replacing batteries in case of such requirements 6. Replacing / Rewinding motor, Replacing suspension rope if required 7. Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevant IS to be carried out before Handing over. Scope of work:- a) Supply of lift materials &amp; installationb) Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. Supply of book let with complete details of maintenance schedule and control diagram. g) Giving training to department staff for attending trouble shooting h) Free servicing for 36months after handing over.

OD : Supply, Installation Testing and commissioning of 15 Passenger Machine Roomless Lift with the following specifications including allrequired standard Features.<br>1. Type of Lift:Passenger(15 passenger)<br>2. Method of control Micro processor based V3F with ARD system. <br>3. Load/Person: 1020kg/15 persons<br>4.Rated Speed in m/s: 1.00 m/s<br>5.Car Travel: 17 m approx<br>6. No. of Floors Served: Four<br>7. Overhead: 4000mm<br>8. Pit height: 1750mm<br>9.Operation: Simplex Full Collective Control<br>10. Hoist way Required: 2100mm wide x 2600mmdeep<br>11. Hoistway Entrance: Two panel centre opening Panel <br>12. Car dimensions: As per OEMstandard<br>13. Door dimensions: 900 mm wide x 2000 mm internal height<br>12. Power supply: 415volts, 3 phase, 50Hz, AC regulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting, round/square LED (CL60) Stainless Steel Round/Square spot LED light<br>14. Car flooring: Stainless steel 6 mm antiskid flooring: Stainless steel Hairline.<br>15. Car operating panel: Full Height StainlessSteel Face Plate Silver brushed Segmented LCD display Square flush mounted & Automatic Rescue Device Provide automatic rescue device with an electronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescue operation should act within 10 seconds of power failure <br>16. Landing Signalization-Stainless Steel 7 segment display Flush Mounted Silver brushed Square<br>""Features included<br>1. Car Emergency Light<br>2. Fireman Drive<br>3. Curtain of Light 169 Beams<br>4. Accurate Relevelling<br>5. Automatic, Closed Door<br>6. Emergency Rescue Device with audio announcer<br>7. 2 Way Dedicated Intercom<br>8. Nudging service<br>9. AttendantService<br>10. Doors closed<br>11. Round/square spot LED light and Stainless Steel framed 1/2toughened glass door. <br>"<br>"Guarantee - company shall carry out free maintenance during warranty period which includes <br>1. Servicing Lift once in month, Cleaning lift equipment <br>2. Lubricating allrequired machinery / equipment <br>3. Replacing of Lubricating Oil when required <br>4. Replacing fuse-able items, alarm etc . <br>5. Recharging /replacing batteries in case of such requirements <br>6.Replacing / Rewinding motor, Replacing suspension rope if required <br>7. Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevant IS to be carried outbefore Handing over. <br> "<br>"Scope of work:- <br>a) Supply of lift materials & installation<br>b) Scaffolding <br>c) Door frames <br>d) Supporting steel <br>e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. <br>f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. Supply of book let with complete details of maintenanceschedule and control diagram. <br>g) Giving training to department staff for attending trouble shooting<br>h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of 15 Passenger Machine Room less Lift with the following specifications including all required standard Features.1. Type of Lift: Passenger lift(15 passenger) 2. Method of control Micro processor based V3F with ARD system. 3. Load/Person: 1020kg/15 persons 4. Rated Speed in m/s: 1.00 m/s 5. Car Travel: 23.1 m approx6. No. of Floors Served: Eight 7. Overhead: 4000mm 8. Pit height: 1500mm 9. Operation: Simplex Full Collective Control 10. Hoist way Required: 2300mm wide x 3000mm deep 11. Hoist way Entrance: Two panel centre opening Panel 12. Car dimensions: As per OEM standard13. Door dimensions: 900 mm wide x 2000 mm internal height 12. Power supply: 415volts, 3 phase, 50Hz, AC regulation 340-480 V 13. Car Ceiling and Lighting: Direct lighting, round/square LED (CL60) Stainless Steel Round/Square spot LED light 14. Car flooring: Stainless steel 6 mm anti skid flooring: Stainless steel Hairline.15. Car operating panel: Full Height Stainless Steel Face Plate Silver brushed Segmented LCD display Square flush mounted &amp; Automatic Rescue Device Provide automatic rescue device with an electronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescue operation should act within 10 seconds of power failure 16. Landing Signalization-Stainless Steel 7 segment display Flush Mounted Silver brushed SquareFeatures included1. Car Emergency Light2. Fireman Drive3. Curtain of Light 169 Beams4. Accurate Relevelling5. Automatic, Closed Door6. Emergency Rescue Device with audio announcer7. 2 Way Dedicated Intercom8. Nudging service9. Attendant Service10. Doors closed11. Round/square spot LED light.Guarantee - company shall carry out free maintenance during warranty period which includes 1. Servicing Lift once in month, Cleaning lift equipment 2. Lubricating all required machinery / equipment 3. Replacing of Lubricating Oil when required 4. Replacing fuse-able items, alarm etc . 5. Recharging /replacing batteries in case of such requirements 6. Replacing / Rewinding motor, Replacing suspension rope if required 7. Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevant IS to be carried out before Handing over. Scope of work:- a) Supply of lift materials &amp; installationb) Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. Supply of book let with complete details of maintenance schedule and control diagram. g) Giving training to department staff for attending trouble shooting h) Free servicing for 36months after handing over.

OD : Supply, Installation Testing and commissioning of 20 Passenger cum Bed Machine Room less Lift withthe following specificationsincluding all required standard Features.<br>1. Type of Lift: Passenger CumBed lift(20 passenger)<br>2. Method of control Micro processor based V3F with ARD system.<br>3.Load/Person: 1360kg/20 persons<br>4. Rated Speed in m/s: 1.00 m/s<br>5. Car Travel: 16.5 mapprox<br>6. No. of Floors Served: Six<br>7. Overhead: 4000mm<br>8. Pit height: 1750mm<br>9.Operation: Simplex Full Collective Control<br>10. Hoist way Required: 2350mm wide x 3000mmdeep<br>11. Hoist way Entrance: Two panel centre opening Panel<br>12. Car dimensions: As per OEM standard<br>13. Door dimensions: 1100 mm wide x 2000 mm internal height<br>12. Power supply:415volts, 3 phase, 50Hz, AC regulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting,round/square LED Stainless Steel Round/Square spot LED light.14. Car flooring: Stainless steel 6 mmanti skid flooring: Stainless steel Hairline.<br>15. Car operating panel: Full Height Stainless Steel FacePlate Silver brushed Segmented LCD display Square flush mounted & Automatic Rescue Device Provide automatic rescue device with an electronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescue operation should act within 10 seconds of power failure<br>16.Landing Signalization-Stainless Steel 7 segment display Flush Mounted Silver brushedSquare<br>Features included 1. Car Emergency Light 2. Fireman Drive 3. Curtain of Light 169 Beams 4.Accurate Relevelling 5. Automatic, Closed Door 6. Emergency Rescue Device with audio announcer 7. 2 Way Dedicated Intercom 8. Nudging service 9. Attendant Service 10. Doors closed 11. Round/squarespot LED light and Stainless Steel framed 1/2 toughened glass door.<br>Guarantee - company shall carry out free maintenance during warranty period which includes 1. Servicing Lift once in month,Cleaning lift equipment 2. Lubricating all required machinery / equipment 3. Replacing of Lubricating Oil when required 4. Replacing fuse-able items, alarm etc . 5. Recharging /replacing batteries in case of such requirements 6. Replacing / Rewinding motor, Replacing suspension rope if required 7.Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevant IS to be carried out before Handing over.<br>Scope of work:- a) Supply of lift materials & installation b) Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year asper new lift rule. Supply of book let with complete details of maintenance schedule and control diagram.g) Giving training to department staff for attending trouble shooting h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of 20 Passenger cum Bed Machine Roomless Lift with the following specifications including all required standard Features.<br>1. Type of Lift: Passenger CumBed lift(20 passenger)<br>2. Method of control Micro processor based V3F with ARD system.<br>3.Load/Person: 1360kg/20 persons<br>4.Rated Speed in m/s: 1.00 m/s<br>5.Car Travel: 19.8 mapprox<br>6. No. of Floors Served: Seven<br>7. Overhead: 4000mm<br>8. Pit height: 1750mm<br>9.Operation: Simplex Full Collective Control<br>10. Hoist way Required: 2350mm wide x 3000mm deep<br>11. Hoist way Entrance: Two panel centre opening Panel<br>12. Car dimensions: As per OEM standard<br>13. Door dimensions: 1100 mm wide x 2000 mm internal height<br>12. Power supply:415volts, 3 phase, 50Hz, AC regulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting,round/square LED Stainless Steel Round/Square spot LED light.14. Car flooring: Stainless steel 6 mmanti skid flooring: Stainless steel Hairline.<br>15. Caroperating panel: Full Height Stainless Steel FacePlate Silver brushed Segmented LCD display Square flush mounted & Automatic Rescue Device Provideautomatic rescue device with an electronic controller powered by 4 Nos. 12V 24 AH dry sealedmaintenance free batteries. The rescue operation should act within 10 seconds of power failure<br>16.Landing Signalization-Stainless Steel 7 segment display Flush Mounted Silver brushedSquare"<br>Features included<br>1. Car Emergency Light<br>2. Fireman Drive<br>3. Curtain of Light 169 Beams<br>4. Accurate Relevelling<br>5. Automatic, Closed Door<br>6. Emergency Rescue Devicewith audio announcer<br>7. 2 Way Dedicated Intercom<br>8. Nudging service<br>9. Attendant Service<br>10. Doors closed<br>11. Round/square spot LED light and Stainless Steel framed 1/2toughened glass door.Guarantee - company shall carry out free maintenance during warranty period which includes<br>1. Servicing Lift once in month, Cleaning lift equipment<br>2. Lubricating all requiredmachinery / equipment<br>3. Replacing of Lubricating Oil when required<br>4. Replacing fuse-ableitems, alarm etc .<br>5. Recharging /replacing batteries in case of such requirements<br>6. Replacing /Rewinding motor, Replacing suspension rope if required<br>7. Replacing/renewing all defective part ofthe lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proofof sheetmetalenclosure29,Tests At site tests as per relevant IS to be carried out before Handingover.Scope of work:-<br>a) Supply of lift materials & installation<br>b) Scaffolding<br>c) Door frames<br>d) Supporting steel<br>e) Temporary electric supply for installation of lift. Electric supply fortesting and commissioning of lift is to be arranged by the firm on their own account.<br>f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparationof necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new liftrule. Supply of book let with complete details of maintenance schedule and control diagram.<br>g) Givingtraining to department staff for attending trouble shooting<br>h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of 10 Passenger Machine Roomless Lift with the following specifications including all required standard Features.<br>1. Type of Lift: Passenger lift(10 passenger)<br>2. Method of control Micro processor based V3F with ARD system. <br>3. Load/Person:680kg/10 persons<br>4.Rated Speed in m/s: 1.00 m/s<br>5.Car Travel: 12 m approx<br>6. No. of FloorsServed: Two<br>7. Overhead: 4000mm<br>8. Pit height: 1400mm<br>9. Operation: Simplex Full Collective Control<br>10. Hoist way Required: 2100mm wide x 2400mm deep<br>11. Hoistway Entrance: Two panel centre opening Panel <br>12. Car dimensions: As per OEM standard<br>13. Door dimensions: 900 mm wide x 2000 mm internal height<br>12. Power supply: 415volts, 3 phase, 50Hz, ACregulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting, round/square LED (CL60) Stainless Steel Round/Square spot LED light<br>14. Car flooring: Stainless steel 6 mm antiskid flooring: Stainless steel Hairline.<br>15. Car operating panel: Full Height Stainless Steel Face Plate Silver brushed Segmented LCD display Square flush mounted & Automatic Rescue Device Provide automatic rescue device with an electronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescue operation should act within 10 seconds of power failure <br>16. Landing Signalization- Stainless Steel 7 segment display Flush Mounted Silver brushed Square<br>"<br>"Features included<br>1. Car Emergency Light<br>2. Fireman Drive<br>3. Curtain of Light 169 Beams<br>4. Accurate Relevelling<br>5. Automatic, Closed Door<br>6. Emergency Rescue Device with audio announcer<br>7. 2 Way Dedicated Intercom<br>8. Nudging service<br>9. Attendant Service<br>10. Doors closed<br>11. Round/square spot LED light and Stainless Steel framed 1/2 toughened glass door. <br>""Guarantee - company shall carry out free maintenance during warranty period which includes <br>1. Servicing Lift once in month, Cleaning lift equipment <br>2. Lubricating all required machinery / equipment <br>3. Replacing of Lubricating Oil when required <br>4. Replacing fuse-able items, alarm etc <br>5. Recharging /replacing batteries in case of such requirements <br>6. Replacing / Rewinding motor, Replacing suspension rope if required <br>7. Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevant IS to be carried out before Handing over. <br> "<br>"Scope of work:- <br>a) Supply of lift materials & installation<br>b) Scaffolding <br>c) Door frames <br>d) Supporting steel <br>e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. <br>f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparationof necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. Supply of book let with complete details of maintenance schedule and control diagram. <br>g) Giving training to department staff for attending trouble shooting <br>h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of 10 Passenger Machine Room less Lift with the following specifications including all required standard Features.<br>1. Type of Lift: Passenger lift(10passenger)<br>2. Method of control Micro processor based V3F with ARD system. <br>3. Load/Person:680kg/10 persons<br>4. Rated Speed in m/s: 1.00 m/s<br>5. Car Travel: 3.4 m approx<br>6. No. of Floors Served: Two<br>7. Overhead: 4200mm<br>8. Pit height: 1600mm<br>9. Operation: Simplex Full Collective Control<br>10. Hoist way Required: 1800mm wide x 1800mm deep<br>11. Hoist wayEntrance: Two panel to left opening Panel <br>12. Car dimensions: As per OEM standard<br>13. Doordimensions: 900 mm wide x 2000 mm internal height<br>12. Power supply: 415volts, 3 phase, 50Hz, ACregulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting, round/square LED Stainless SteelRound/Square spot LED light<br>14. Car flooring: Stainless steel 6 mm anti skid flooring: Stainless steelHairline.<br>15. Car operating panel: Full Height Stainless Steel Face Plate Silver brushed SegmentedLCD display Square flush mounted & Automatic Rescue Device Provide automatic rescue device with anelectronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescueoperation should act within 10 seconds of power failure <br>16. Landing Signalization-Stainless Steel 7segment display Flush Mounted Silver brushed Square<br>Features included<br>1. Car EmergencyLight<br>2. Fireman Drive<br>3. Curtain of Light 169 Beams<br>4. Accurate Relevelling<br>5.Automatic, Closed Door<br>6. Emergency Rescue Device with audio announcer<br>7. 2 Way DedicatedIntercom<br>8. Nudging service<br>9. Attendant Service<br>10. Doors closed<br>11. Round/squarespot LED light and Stainless Steel framed 1/2 toughened glass door. <br>Guarantee - company shallcarry out free maintenance during warranty period which includes <br>1. Servicing Lift once in month,Cleaning lift equipment <br>2. Lubricating all required machinery / equipment <br>3. Replacing ofLubricating Oil when required <br>4. Replacing fuse-able items, alarm etc . <br>5. Recharging /replacingbatteries in case of such requirements <br>6. Replacing / Rewinding motor, Replacing suspension rope ifrequired <br>7. Replacing/renewing all defective part of the lift including V3F unit if found necessary 26,Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site testsas per relevant IS to be carried out before Handing over. <br> Scope of work:- <br>a) Supply of liftmaterials & installation<br>b) Scaffolding <br>c) Door frames <br>d) Supporting steel <br>e) Temporaryelectric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arrangedby the firm on their own account. <br>f) Obtaining Scheme approval as well as Energization Certificatefrom the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the departmentincluding taking insurance for one year as per new lift rule. Supply of book let with complete details ofmaintenance schedule and control diagram. <br>g) Giving training to department staff for attendingtrouble shooting <br>h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of 10 Passenger Machine Room less Lift with the following specifications including all required standard Features.1. Type of Lift: Passenger lift(10 passenger)2. Method of control Micro processor based V3F with ARD system. 3. Load/Person: 680kg/10 persons4. Rated Speed in m/s: 1.00 m/s5. Car Travel: 23.1 m approx6. No. of Floors Served: Eight 7. Overhead: 4200mm 8. Pit height: 1600mm 9. Operation: Simplex Full Collective Control 10. Hoist way Required: 1900mm wide x 2150mm deep 11. Hoist way Entrance: Two panel to left opening Panel 12. Car dimensions: As per OEM standard13. Door dimensions: 900 mm wide x 2000 mm internal height 12. Power supply: 415volts, 3 phase, 50Hz, AC regulation 340-480 V13. Car Ceiling and Lighting: Direct lighting, round/square LED (CL60) Stainless Steel Round/Square spot LED light14. Car flooring: Stainless steel 6 mm anti skid flooring: Stainless steel Hairline.15. Car operating panel: Full Height Stainless Steel Face Plate Silver brushed Segmented LCD display Square flush mounted &amp; Automatic Rescue Device Provide automatic rescue device with an electronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescue operation should act within 10 seconds of power failure 16. Landing Signalization-Stainless Steel 7 segment display Flush Mounted Silver brushed SquareFeatures included1. Car Emergency Light2. Fireman Drive3. Curtain of Light 169 Beams4. Accurate Relevelling5. Automatic, Closed Door 6. Emergency Rescue Device with audio announcer 7. 2 Way Dedicated Intercom 8. Nudging service 9. Attendant Service 10. Doors closed 11. Round/square spot LED light.Guarantee - company shall carry out free maintenance during warranty period which includes 1. Servicing Lift once in month, Cleaning lift equipment 2. Lubricating all required machinery / equipment 3. Replacing of Lubricating Oil when required 4. Replacing fuse-able items, alarm etc . 5. Recharging /replacing batteries in case of such requirements 6. Replacing / Rewinding motor, Replacing suspension rope if required 7. Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevant IS to be carried out before Handing over. Scope of work:- a) Supply of lift materials &amp; installationb) Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. Supply of book let with complete details of maintenance schedule and control diagram. g) Giving training to department staff for attending trouble shooting h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of 10 Passenger Machine Roomless Lift with the followingspecifications including all required standard Features.<br>1. Type of Lift: Passenger lift(10passenger)<br>2. Method of control Micro processor based V3F with ARD system.<br>3. Load/Person:680kg/10 persons<br>4.Rated Speed in m/s: 1.00 m/s<br>5.Car Travel: 19.8 m approx<br>6. No. of Floors Served: Seven<br>7. Overhead: 4000mm<br>8. Pit height: 1400mm<br>9. Operation: SimplexFull Collective Control<br>10. Hoist way Required: 1950mm wide x 2150mm deep<br>11. Hoist wayEntrance: Two panel centre opening Panel<br>12. Cardimensions: As per OEM standard<br>13. Door dimensions: 900 mm wide x 2000 mm internal height<br>12. Power supply: 415volts, 3 phase, 50Hz, ACregulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting, round/square LED Stainless SteelRound/Square spot LED light 4. Car flooring: Stainless steel 6 mm anti skid flooring: Stainless steel Hairline.15. Car operating panel: Full Height Stainless Steel Face Plate Silver brushed Segmented LCD display Square flush mounted &amp; Automatic Rescue Device Provide automatic rescue device with an electronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescue operation should act within 10 seconds of power failure 16. Landing Signalization-Stainless Steel 7 segment display Flush Mounted Silver brushed SquareFeatures included1. Car Emergency Light2. Fireman Drive3. Curtain of Light 169 Beams4. Accurate Relevelling5. Automatic, Closed Door6. Emergency Rescue Device with audio announcer7. 2 Way Dedicated Intercom8. Nudging service9. Attendant Service10. Doors closed11. Round/square spot LED light.Guarantee - company shall carry out free maintenance during warranty period which includes 1. Servicing Lift once in month, Cleaning lift equipment 2. Lubricating all required machinery / equipment 3. Replacing of Lubricating Oil when required 4. Replacing fuse-able items, alarm etc . 5. Recharging /replacing batteries in case of such requirements 6. Replacing / Rewinding motor, Replacing suspension rope if required 7. Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panel Control panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevant IS to be carried out before Handing over. Scope of work:- a) Supply of lift materials &amp; installationb) Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. f) Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. Supply of book let with complete details of maintenance schedule and control diagram. g) Giving training to department staff for attending trouble shooting h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of 10 Passenger Machine Room less Lift with thefollowing specifications including all required standard Features.<br>1. Type of Lift: Passenger lift(10passenger)<br>2. Method of control Micro processor based V3F with ARD system.<br>3. Load/Person:680kg/10 persons<br>4. Rated Speed in m/s: 1.00 m/s<br>5. Car Travel: 16.5 m approx<br>6. No. of Floors Served: Six<br>7. Overhead: 4000mm<br>8. Pit height: 1400mm<br>9. Operation: Simplex FullCollective Control<br>10. Hoist way Required: 1950mm wide x 2150mm deep<br>11. Hoist wayEntrance: Two panel centre opening Panel<br>12. Car dimensions: As per OEM standard<br>13. Doordimensions: 900 mm wide x 2000 mm internal height<br>12. Power supply: 415volts, 3 phase, 50Hz, ACregulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting, round/square LED Stainless SteelRound/Square spot LED light<br>14. Car flooring: Stainless steel 6 mm anti skid flooring: Stainless steelHairline.<br>15. Car operating panel: Full Height Stainless Steel Face Plate Silver brushed SegmentedLCD display Square flush mounted & Automatic Rescue Device Provide automatic rescue device with anelectronic controller powered by 4 Nos. 12V 24 AH dry sealed maintenance free batteries. The rescue operation should act within 10 seconds of power failure<br>16. Landing Signalization-Stainless Steel 7segment display Flush Mounted Silver brushed Square<br>Features included<br>1. Car EmergencyLight<br>2. Fireman Drive<br>3. Curtain of Light 169 Beams<br>4. Accurate Relevelling<br>5.Automatic, Closed Door<br>6. Emergency Rescue Device with audio announcer<br>7. 2 Way DedicatedIntercom<br>8. Nudging service<br>9. Attendant Service<br>10. Doors closed<br>11. Round/squarespot LED light and Stainless Steel framed 1/2 toughened glass door.<br>Guarantee - company shallcarry out free maintenance during warranty period which includes 1. Servicing Lift once in month,Cleaning lift equipment 2. Lubricating all required machinery / equipment 3. Replacing of Lubricating Oilwhen required 4. Replacing fuse-able items, alarm etc . 5. Recharging /replacing batteries in case of such requirements 6. Replacing / Rewinding motor, Replacing suspension rope if required 7.Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panelControl panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevantIS to be carried out before Handing over.<br>Scope of work:- a) Supply of lift materials & installation b)Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electricsupply for testing and commissioning of lift is to be arranged by the firm on their own account. f)Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate includingpreparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate bythe firm for which no refund will be made from the department including taking insurance for one year asper new lift rule. Supply of book let with complete details of maintenance schedule and control diagram.g) Giving training to department staff for attending trouble shooting h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of 10 Passenger Machine Room less Lift with the following specifications including all required standard Features.<br>1. Type of Lift: Passenger lift(10passenger)<br>2. Method of control Micro processor based V3F with ARD system. <br>3. Load/Person:680kg/10 persons<br>4. Rated Speed in m/s: 1.00 m/s<br>5. Car Travel: 6.6 m approx<br>6.No.ofFloors Served: Three<br>7. Overhead: 4000mm<br>8. Pit height: 1500mm<br>9. Operation: SimplexFull Collective Control<br>10. Hoist way Required: 1800mm wide x 2400mm deep<br>11. Hoist wayEntrance: Two panel to left opening plain Panel <br>12. Car dimensions: As per OEM standard<br>13.Door dimensions: 900 mm wide x 2000 mm internal height<br>12. Power supply: 415volts, 3 phase,50Hz, AC regulation 340-480 V<br>13. Car Ceiling and Lighting: Direct lighting, round/square LED(CL60) Stainless Steel Round/Square spot LED light<br>14. Car flooring: Stainless steel 6 mm anti skidflooring: Stainless steel Hairline.<br>15. Car operating panel: Full Height Stainless Steel Face PlateSilver brushed Segmented LCD display Square flush mounted & Automatic Rescue Device Provide automatic rescue device with an electronic controller powered by 4 Nos. 12V 24 AH dry sealedmaintenance free batteries. The rescue operation should act within 10 seconds of power failure <br>16.Landing Signalization-Stainless Steel 7 segment display Flush Mounted Silver brushedSquare<br>Features included<br>1. Car Emergency Light<br>2. Fireman Drive<br>3. Curtain of Light169 Beams<br>4. Accurate Relevelling<br>5. Automatic, Closed Door<br>6. Emergency Rescue Devicewith audio announcer<br>7. 2 Way Dedicated Intercom<br>8. Nudging service<br>9. AttendantService<br>10. Doors closed<br>11. Round/square spot LED light and Stainless Steel framed 1/2 toughened glass door. <br>Guarantee - company shallcarry out free maintenance during warranty period which includes 1. Servicing Lift once in month,Cleaning lift equipment 2. Lubricating all required machinery / equipment 3. Replacing of Lubricating Oil when required 4. Replacing fuse-able items, alarm etc . 5. Recharging /replacing batteries in case of suchrequirements 6. Replacing / Rewinding motor, Replacing suspension rope if required 7.Replacing/renewing all defective part of the lift including V3F unit if found necessary 26, Control panelControl panel will be dust and vermin proof of sheet metal enclosure 29,Tests At site tests as per relevantIS to be carried out before Handing over.<br>Scope of work:- a) Supply of lift materials & installation b)Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electricsupply for testing and commissioning of lift is to be arranged by the firm on their own account. f)Obtaining Scheme approval as well as Energization Certificate from the electrical Inspectorate includingpreparation of necessary drawing for the same. Necessary fee shall be remitted to the Inspectorate bythe firm for which no refund will be made from the department including taking insurance for one year asper new lift rule. Supply of book let with complete details of maintenance schedule and control diagram. g) Giving training to department staff for attending trouble shooting h) Free servicing for 36months after handing over

OD : Supply, Installation Testing and commissioning of gearless, winding type Dumbwaiter with the following specifications including all required standard Features.Type : Dumbwaiter.Capacity : 250kg. Speed : 0.25 Meter per second. Stops and opening : 2 Stop 2 Opening. Machine type Winding type Motor : Three phase induction motor, 415V. Type of controller : Variable Voltage Variable Frequency (VVVF) Imported.<br>Travel : 3 metre approximate.<br>Power supply : 415 V, 3 phase, 50Hz, AC.<br>Shaft dimensions W x D : 1730mm x 800mm.<br>Car Door size : 1200mm W x 600mm D.<br>Car finish : Stainless Steel.<br>Car entrance : Manual Collapsible Opening Door (1000 mm).<br>Note: Dimension of Dumbwaiter car may change as per OEM standards.

OD : Supply, Installation Testing and commissioning of gearless, winding type Dumbwaiter with the following specifications including all required standard Features. Type : Dumbwaiter.Capacity : 250kg. Speed : 0.5 Meter per second. Stops and opening : 8 Stop 8 Opening. Motor : Three phase induction motor, 415V. Type of controller : Variable Voltage Variable Frequency (VVVF) Imported. Travel : 21 metre approximate. Power supply : 415 V, 3 phase, 50Hz, AC. Shaft dimensions W x D : 1000mm x 1000mm.(1400mm x 1425mm) Car Door size : 1000mm W x 900mm D. Car finish : Stainless Steel. Car entrance : Manual Collapsible Opening Door (1000 mm). Note: Dimension of Dumbwaiter car may change as per OEM standards.

OD : Supplying and fixing thermoplastic polycarbonate cable junction boxes (IP55) with 5Pole terminals suitable upto 2.5 sqmm cable etc complete with connections, testing and commissioning etc. as required.

OD : Supply and fixing of fire retardant/extinguishing electrical insulated synthetic mat of 1m x 1m x 2 mm-for 3.3kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of-IS:15652:2006 (with upto date amendment), suitable for 3.3kV voltage and having minimum width of-1000mm +/- 20mm and including supply of required quantity of adhesive / compound .

OD : Supply and fixing of fire retardant/extinguishing electrical insulated synthetic mat of 1m x 1m x 2.5 mm for-11kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of-IS:15652:2006 (with upto date amendment), suitable for 11kV voltage and having minimum width of-1000mm +/- 20mm and including supply of required quantity of adhesive / compound

OD : Supply and fixing single line diagram, schematic diagrams etc. of A0 size -including lamination etc. as required complete on wall.

OD : Supply and fixing single line diagram, schematic diagrams etc. of A1 size -including lamination etc. as required complete on wall.

OD : Supply and fixing of First aid box

OD : Supply and fixing anodized aluminum glass framed shock treatment chart.

OD : Supplying of Rubber hand gloves suitable for 11 kV

15.2 : Supplying, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor with day light dimming (lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection .) having high preformance, regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

14.4 : Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

90.12.9.6 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench

OD : Preparation of all drawings, submitting and getting approval from Electrical Inspectorate, submitting of completion certificates and arranging inspection, getting sanction and energisation certificates from Electrical Inspectorate and commissioning of the whole installation in the premises. All statutory payments will be reimbursed on production of the original receipts.

OD : Preparation of all drawings, submitting and getting approval, arranging inspection from KSEB, obtaining power allocation &amp; permanent power connection, etc. and commissioning of the whole installation in the premises. All statutory payments will be reimbursed on production of the original receipts.

90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.12.10.2 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.10.3 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size

90.12.10.4 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation77/63 mm or nearest size

OD : Supply,installation,testing and commissioning of air cooled type outdoor units equipped with 100% inverter Scroll compressor/Twin Rotary compressors, working with refrigerant gas R410A, air cooledcondensors,condenser coil fabricated from seamless copper tube and plate type anti-corrosive aluminium fins of multi-row,condenser fan, condenser fan-motor unit,vibration isolator pads and safety devices like high/low pressure cut-outs, oil pressure failure switch, safety thermostat, over load relay, fusible plugs, fuses, accumulator, liquid and gas shut-off valves,solenoid valves etc. and suitable for operation on 380V-415V, 3Phase,50Hz A.C supply.28 HP

OD : Supply,installation,testing and commissioning of air cooled type outdoor units equipped with 100% inverter Scroll compressor/Twin Rotary compressors, working with refrigerant gas R410A, air cooled condensors,condenser coil fabricated from seamless copper tube and plate type anti-corrosive aluminium fins of multi-row,condenser fan, condenser fan-motor unit,vibration isolator pads and safety devices like high/low pressure cut-outs, oil pressure failure switch, safety thermostat, over load relay, fusible plugs,fuses, accumulator, liquid and gas shut-off valves,solenoid valves etc. and suitable for operation on 380V-415V, 3Phase,50Hz A.C supply.38 HP

OD : Supply,installation,testing and commissioning of air cooled type outdoor units equipped with 100% inverter Scroll compressor/Twin Rotary compressors, working with refrigerant gas R410A, air cooled condensors,condenser coil fabricated from seamless copper tube and plate type anti-corrosive aluminium fins of multi-row,condenser fan, condenser fan-motor unit,vibration isolator pads and safety devices like high/low pressure cut-outs, oil pressure failure switch, safety thermostat, over load relay, fusible plugs, fuses, accumulator, liquid and gas shut-off valves,solenoid valves etc. and suitable for operation on 380V-415V, 3Phase,50Hz A.C supply. 42 HP

OD : Supply,installation,testing and commissioning of air cooled type outdoor units equipped with 100% inverter Scroll compressor/Twin Rotary compressors, working with refrigerant gas R410A, air cooledcondensors,condenser coil fabricated from seamless copper tube and plate type anti-corrosive aluminium fins of multi-row,condenser fan, condenser fan-motor unit,vibration isolator pads and safety devices likehigh/low pressure cut-outs, oil pressure failure switch, safety thermostat, over load relay, fusible plugs,fuses, accumulator, liquid and gas shut-off valves,solenoid valves etc. and suitable for operation on 380V-415V, 3Phase,50Hz A.C supply. 48 HP

OD : Supply, installation, testing and commissioning of Hi-wall/Wall mounted type Indoor unit suitable for VRF/VRV system. The unit shall have necessary filters, inbuilt thermostat, cooling coil, electronic expansion valve, fan, fan motor,cordless remote etc.The units shall be suitable for input power supply of 1 phase, 230V, 50hz.Rates shall include cordless remote controller.Consider 3 star or above rated machines with EER 2.80 or above. 1.6 TR Hiwall type Indoor unit

OD : Supply, installation, testing and commissioning of ceiling mounted 4 way cassette type Indoor unit suitable for VRF/VRV system. The unit shall have necessary filters,drain pump,cassette panel, provision for fresh air, in-built thermostat,cooling coil, electronic expansion valve, fan, fan motor,cordless remote etc.The units shall be suitable for input power supply of 1 phase, 230V, 50hz. Rates shall include cordless remote controller.Consider 3 star or above rated machines with EER 2.80 or above<br>3.0 TR Cassette type Indoor unit

OD : Supply, installation, testing and commissioning of ceiling mounted 4 way cassette type Indoor unit suitable for VRF/VRV system. The unit shall have necessary filters,drain pump,cassette panel, provision for fresh air, in-built thermostat,cooling coil, electronic expansion valve, fan, fan motor,cordless remote etc.The units shall be suitable for input power supply of 1 phase, 230V, 50hz. Rates shall include cordless remote controller.Consider VRF-( EER 3.28 or above)<br>4.0 TR Cassette type Indoor unit

OD : Supply, installation, testing and commissioning of ceiling mounted Ductable type Indoor unit suitable for VRF/VRV system. The unit shall have necessary filters,inbuilt thermostat,cooling coil, electronic expansion valve, fan, fan motor,corded remote etc.The units shall be suitable for input power supply of 1 phase, 230V, 50hz. Rates shall include corded remote controller.Consider VRF-(EER 3.28 or above)<br>6.4 TR Ductable type Indoor unit

OD : Supply, installation, testing and commissioning of ceiling mounted Ductable type Indoor unit suitable for VRF/VRV system. The unit shall have necessary filters,inbuilt thermostat,cooling coil, electronicexpansion valve, fan, fan motor,corded remote etc.The units shall be suitable for input power supply of 1 phase, 230V, 50hz. Rates shall include corded remote controller.Consider VRF-(EER 3.28 or above)<br>8.0 TR Ductable type Indoor unit

OD : Supply, installation and testing of Refnet joints in pipe work for indoor unit connection in conformance with manufacturer recommendations

OD : Supply, installation and testing of Branch kit in pipe work for outdoor unit connection in conformance with manufacturer recommendations

OD : Supply, installation and testing of individual type cordless remote controller for Ductable units.

OD : Supply, installation and testing of centralised type cordless remote controller capable upto 64 groups or 128 number of indoor units.

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports.<br>41.3 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrilerubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports..<br>38.1 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports.<br>34.9 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threadedrods,anchor bolt,threaded fastners and supports.<br>31.8 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHPgrade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrilerubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports..<br>28.6 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports.<br>25.4 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerantpiping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threadedrops,anchor bolt, thread fastner sand supports. 22.2 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threadedrops,anchor bolt, thread fastner sand supports.19.1 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threadedrops,anchor bolt, thread fastner sand supports. 15.9 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threadedrops,anchor bolt, thread fastner sand supports. 12.7 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports. 9.5 mm

OD : Supply, installation, testing and commissioning of seamless half hard temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports..<br>6.4 mm

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted four way cassette type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil, filter, fan-motor assembly and inbuilt drain pump. Air cooled condensing unit complete with Scroll/Rotary compressor,condenser fans,condenser coil. The unit should operate on R22/R410A/R32 refrigerant.Rates shall include cordless remote controller. Consider 3 Star or above rated machines with VRF (EER - 3.28). 4.0 TR Cassette unit

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted four way cassette type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil, filter, fan-motor assembly and inbuilt drain pump. Air cooled condensing unit complete with Scroll/Rotary compressor,condenser fans,condenser coil. The unit should operate on R22/R410A/R32 refrigerant.Rates shall include cordless remote controller. Rating - 3 Star or above, EER - 2.8. 3.0 TR Cassette unit

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted four way cassette type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil, filter, fan-motor assembly and inbuilt drain pump. Air cooled condensing unit complete with Scroll/Rotary compressor,condenser fans,condenser coil. The unit should operate on R22/R410A/R32 refrigerant.Rates shall include cordless remote controller.Rating - 3 Star, EER - 2.8, 2.0 TR Cassette unit

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted four way cassette type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil, filter, fan-motor assembly and inbuilt drain pump. Air cooled condensing unit complete with Scroll/Rotary compressor,condenser fans,condenser coil. The unit should operate on R22/R410A/R32 refrigerant.Rates shall include cordless remote controller.Consider 3 star or above rated machines with EER 2.80 or above<br>1.5 TR Cassette unit

OD : Supply, installation, testing and commissioning of Inverter Wall mounted/Hi-wall type Split AC unit complete with indoor unit and outdoor unit. Indoor unit with DX cooling coil,filter,fan-motor assembly and air outlet with horzontal/vertical automatic rotating deflecters.Air cooled condensing unit complete with Scroll/Rotary compressor, condenser fans,condenser coil.The unit should operate on R410A/R32/R407C refrigerant.Rates shall include cordless remote controller. Rating - 3 Star, EER- 2.8, 1.0 TR Hi wall unit

OD : Supply, installation, testing and commissioning of Inverter Wall mounted/Hi-wall type Split AC unit complete with indoor unit and outdoor unit. Indoor unit with DX cooling coil,filter,fan-motor assembly and air outlet with horzontal/vertical automatic rotating deflecters.Air cooled condensing unit complete with Scroll/Rotary compressor, condenser fans,condenser coil.The unit should operate on R410A/ R32/R407C refrigerant.Rates shall include cordless remote controller. Rating - 3 Star, EER - 2.8, 1.5 TR Hi-wall unit

OD : Supply, installation, testing and commissioning of Inverter Wall mounted/Hi-wall type Split AC unit complete with indoor unit and outdoor unit. Indoor unit with DX cooling coil,filter,fan-motor assembly and air outlet with horzontal/vertical automatic rotating deflecters.Air cooled condensing unit complete with Scroll/Rotary compressor, condenser fans,condenser coil.The unit should operate on R410A/ R32/R407C refrigerant.Rates shall include cordless remote controller.Rating - 3 Star, EER - 2.8, 2.0 TR Hi-wall unit

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted Ductable type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil ,filter and fan-motor assembly. Air cooled condensing unit complete with Scroll/Rotary compressor,condenser fans,condenser coil.The unit should operate on R410A/R32/R22 refrigerant.Rates shall include corded remote controller. Consider VRF (EER - 3.28), 4.0 TR Ductable unit

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted Ductable type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil ,filter and fan-motor assembly. Air cooled condensing unit complete with Scroll/Rotarycompressor,condenser fans,condenser coil.The unit should operate on R410A/R32/R22 refrigerant.Rates shall include corded remotecontroller.<br>Consider VRF-( EER 3.28 or above)<br>8.5 TR Ductable unit

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted Ductable type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil ,filter and fan-motor assembly. Air cooled condensing unit complete with Scroll/Rotary compressor,condenser fans,condenser coil.The unit should operate on R410A/R32/R22 refrigerant.Rates shall include corded remote controller.<br>Consider VRF-( EER 3.28 or above)<br>5.5 TR Ductable unit

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted Ductable type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil ,filter and fan-motor assembly. Air cooled condensing unit complete with Scroll/Rotary compressor,condenser fans,condensercoil.The unit should operate on R410A/R32/R22 refrigerant.Rates shall include corded remote controller.Consider 3 star or above rated machines with EER 2.80 or above<br>3.0 TR Ductable unit

OD : Supply, installation, testing and commissioning of Inverter ceiling mounted Ductable type Split AC unit complete with indoor unit and outdoor units. Indoor unit with DX cooling coil ,filter and fan-motorassembly. Air cooled condensing unit complete with Scroll/Rotary compressor,condenser fans,condenser coil.The unit should operate on R410A/R32/R22 refrigerant.Rates shall include corded remote controller.Consider 3 star or above rated machines with EER 2.80 or above<br>11.0 TR Ductable unit

OD : Supply, installation, testing and commissioning of seamless soft temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves (shall have atleast R - 0.035) with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports. 6.4 mm

OD : Supply, installation, testing and commissioning of seamless soft temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves (shall have atleast R - 0.035) with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports. 15.9 mm

OD : Supply, installation, testing and commissioning of seamless soft temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves (shall have atleast R - 0.035) with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports. 12.7 mm

OD : Supply, installation, testing and commissioning of seamless soft temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves (shall have atleast R - 0.035) with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports. 9.5 mm

OD : Supply, installation, testing and commissioning of seamless soft temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves (shall have atleast R - 0.035) with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports. 25.4 mm

OD : Supply, installation, testing and commissioning of seamless soft temper copper refrigerant piping with necessary fittings like Elbows,Tees, Reducers, Couplers etc. Regrigerant piping shall be of DHP grade, eddy current tested and RoHS compliant Refrigerant piping shall be duly insulated with nitrile rubber sleeves (shall have atleast R - 0.035) with all joints sealed with black adhesive tape in confrormnace with manufacturer recommendations. All refrigerant pipes shall be properly anchored to ceiling/wall using threaded rods,anchor bolt,threaded fastners and supports. 19.1 mm

90.6.5.19 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 4C x2.5 Sq.mm

OD : Supply and installation of voltage stabilizer to maintain a constant voltage level(170-270V) for air conditioning units to prevent undue power failures. 4 KVA

OD : Providing and fixing Polyvinyl Chloride (PVC) pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &amp; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 40 mm dia 10Kgf/cm2

OD : Providing and fixing Polyvinyl Chloride (PVC) pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &amp; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 32 mm dia 10Kgf/cm2

OD : Providing and fixing Polyvinyl Chloride (PVC) pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &amp; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 25 mm dia 10Kgf/cm2

OD : Mounting Arrangement - Supply and installation of necessary mounting arrangements for High wall outdoor units with suitable vibration isolators. All frame supports shall be of Mild Steel.

OD : Mounting Arrangement - Supply and installation of necessary mounting arrangements for VRF/VRF out ddor units with suitable vibration isolators. All frame supports shall be of Mild Steel.

OD : Supply and installation of necessary mounting arrangements for Ductable outdoor units with suitable vibration isolators. All frame supports shall be of Mild Steel.

OD : Supply and fixing of 5mil Fiber glass cloth over copper pipe for mechanical and UV protection.

OD : Supply and applying of vapour barrier coating 30 - 36 over the fiber glass cloth.

OD : Supply and installation of necessary mounting arrangements for Cassette outdoor units with suitable vibration isolators. All frame supports shall be of Mild Steel.

OD : Supply and installation of voltage stabilizer to maintain a constant voltage level(170-270V) for air conditioning units to prevent undue power failures. 5 KVA

OD : Supply and fixing of Timer Circuit for High wall units provided in server room.The Timer shall switch On/Off between working and standby unit after a preset interval based on time and temperature. In the event of failure of any unit, the stand-by unit should start automatically. If the set temperature is notachieved with the working unit, the standby unit should turn ON automatically

16.12.1.1 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006. Thickeness - 0.63 mm sheet

16.12.1.2 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006. Thickeness - 0.8 mm sheet

16.12.1.3 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular dueling as per IS 655-2006. Thickeness - 1 mm sheet

16.12.2.1 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.63 mm thick

16.12.2.2 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.8. mm thick

16.12.2.3 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 1.00 mm thick

16.13 : Supply, Insulation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. GI volume control duct damper

16.15 : Suppluying and Fixing of powder costed extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

OD : Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

OD : Supply and fixing of class '0' type closed cell elastomeric Nitrile rubber insulation (As per ECBC Requirement) of the following thickness for thermal insulation of ducts. 25 mm thick Nitrile Rubber

OD : Supply and fixing of class '1' type open cell elastomeric Nitrile rubber insulation anti microbial type of the following thickness for acoustic insulation of ducts.10 mm thick Nitrile Rubber

OD : Supply and installation of powder coated aluminium air louvers with birdscreen as per the approved quality.

OD : Supply, installation, testing and commissioning of Butterfly damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc., as per specifications of following size - 100 mm Dia

OD : Condensate Drain Pump - Supplying & Installation of Condensate Drain pump kit for High wall units.The drain pump kit shall inlcude tank to collect condensate with inlulit filter and float switch to operate when near full, motor, non-return valve and drain connector kit. Note : If the slope is not available as per site condition, then only this component shall be operated. Consider 9mm thick insulation for condensate drain pipe.

OD : Supplying & installation of Condensate Drain pump kit for Ductable units.The drain pump kit shall inlcude tank to collect condensate with inlulit filter and float switch to operate when near full, motor, non-return valve and drain connector kit.<br>Note : If the slope is not available as per site condition, then only this component shall be operated. Consider 9mm thick insulation for condensate drain pipe.

OD : Exhuast Disc Valve - Supply, installation, balancing and commissioning of Exhaust valves constructed from extruded aluminum with powder coated finish. 100mm dia.

OD : Non-insulated Semi rigid Flexible duct - Supply, installation, testing & commissioning of uninsulated semi rigid flexible duct of following size duly supported at regular interval as per site requirement etc.complete as required as per specifications. Note: Consider when the rigit duct connection is not possible. 100 mm Dia

OD : Fresh Air Inlet - Supply and installation of fresh Air Inlet for Cassette indoor units connected by PVC pipes of specified thickness as required. 75 mm dia - 4kgf/cm2

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 200 CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 500 CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans.550 CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 600 CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans.1000CFM 15mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans.1150CFM 15mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for3 phase fans.3500 CFM 15mm ESP

OD : Supply installation testing and commissioning ofInline fan for ventilation with necessary starter panel for 3 phase fans.3900 CFM 15mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 2000CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 1400CFM 15mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 1250CFM 15mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 1200CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 900CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for3 phase fans. 400CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 150CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 250CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for ventilation 3 phase fans. 300CFM 10mm ESP

OD : Supply installation testing and commissioning ofInline fan for ventilation with necessary starter panel for 3 phase fans. 450CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 700 CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 350 CFM 10mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for 3 phase fans. 3800 CFM 20mm ESP

OD : Supply installation testing and commissioning of IInline fan for ventilation with necessary starter panel for 3 phase fans. 3700 CFM 20mm ESP

OD : Supply installation testing and commissioning ofInline fan for ventilation with necessary starter panel for 3 phase fans. 1650 CFM 15mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for3 phase fans. 1450 CFM 20mm ESP

OD : Supply installation testing and commissioning of Inline fan for ventilation with necessary starter panel for phase fans. 800 CFM 10mm ESP

OD : Staircase Pressurization Fan - Supply installation testing and commissioning of Axial fan with necessary starter panel. 17500 CFM 20mm ESP

OD : Staircase Pressurization Fan - Supply installation testing and commissioning of Inline fan ventilation with necessary starter panel. 350 CFM 10mm ESP

OD : Supply, Installation, Testing and Commissioning of axial flow fans with and adjustable blade angles to deliver the design air quantity. The axial fan casing shall be coated mild steel/ galvanized steel with IE-2 motor rated 250 degree celcius for 2 hours for smoke evacuation and suitable for 415V/3ph/50Hz AC supply. The motor shall be suitable for basement ventilation application with class H insulation. 22500 CFM 25mm ESP

OD : Supply, Installation, Testing and Commissioning of jet fan suitable for 250 degree celcius for 2 hour operation. Each fan shall<br>be complete with dual speed motor, silencer at both ends, casing made of mild steel/ galvanized steel and with aluminium<br>impeller. The motor shall be suitable for basement ventilation application with class H insulation. 315 mm dia

OD : Supplying, fixing, testing commissioning of supply air diffusers of powder coated aluminium with aluminium dampers. Neck size:375x375mm,Outer size:595x595mm

OD : Supplying, fixing, testing commissioning of supply air diffusers of powder coated aluminium with aluminium dampers. Neck size:450x450mm,Outer size:595x595mm

OD : Supplying, fixing, testing commissioning of return air diffusers of powder coated aluminium with aluminium dampers. Neck size:300x300mm,Outer size:595x595mm

OD : Supplying, fixing, testing commissioning of supply air diffusers of powder coated aluminium with aluminium dampers. Neck size:225x225mm,Outer size:595x595mm

OD : Non Return Damper - Supply, installation, testing and commissioning of GI Non-Return damper

OD : Pressure relief damper - Supply, installation, testing and commissioning of Pressure relief damper

OD : Supplying,fixing, testing of Single Lever Divertor with Over Head Shower Arm having maximum flow rate of 9 Litres per Minute. Bath Spout having maximum flow rate of 4 Litres per Minute including all accessories ,cutting and making good the walls wherever required

OD : Providing and fixing of Ceramic Wall Mounted European type W.C. pan of size 380x515x360 mm with seat cover and 40mm Dual Flushing type Flush valve with 100mm square plate having a maximum flow rate of 6 Litres per full flush and 3 Litres per half Flush with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

OD : Providing and fixing of Floor Mounted European type W.C. pan of size 350x80x395 mm with seat cover and Dual Flushing type Flush valve having a maximum flow rate of 6 Litres per full flush and 3 Litres per half Flush with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

OD : Supplying and fixing CP Health Faucet of superior quality having 8mm dia, 1 Mtr long flexible tube with wall hook maximum flow rate of 4 Litres per Minute including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

OD : Supplying,fixing, testing of Concealed Stop Cock(with concealed part and exposed part) suitable for 20mm Pipe with Over Head Shower (SS plate ; Body with minimum 120mm dia round single flow or multy flow arrangement) Arm(Stainless Steel with 20mm dia and 300mm length having 90 deg bend) having maximum flow rate of 9 Litres per Minute including all accessories ,cutting and making good the walls wherever required

OD : Providing and fixing Wall Hung Type Wash Basin with C.I. brackets, 15 mm C.P/Brass pillar tap of superior quality having maximum flow rate of 4 Litres per Minute,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin of size 560X415X200 mm with single Pillar Tap (flow upto 4 LPM)

OD : Providing and fixing Wall Hung Type Wash Basin with C.I. brackets, 15 mm C.P/Brass Basin Mixer of superior quality having maximum flow rate of 4 Litres per Minute,32 mm C.P. brass waste of standard pattern, CP Bottle Trap (32mm), CP Connection Hose (2Nos) including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin of size 560X415X200 with single Basin Mixer (flow upto 4 LPM)

17.10.1.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm

17.10.2.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x510 mm bowl depth 200 mm

17.23 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

17.73.2 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms

OD : Supplying and Fixing stainless steel Towel Rack 600mm long with lower hangers of superior quality

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

OD : Providing and fixing C.P. brass angle valve of supreme quality : 15mm

OD : Providing and fixing 15mm C.P. Brass long Bib Cock of superior quality having maximum flow rate of 4 Litres per Minute and wall to centre of aerator not less than 142mm

18.74.2 : Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour .15 mm nominal bore with 45 cm length

OD : Supply, installation, testing and balancing of Collar Damper

OD : Providing and fixing Under Counter wash basin with C.I. brackets,15 mm C.P/Brass pillar tap of superior quality having maximum flow rate of 4 Litres per Minute, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Vitreous China Under Counter Wash basin of size 605X430X200 or nearest with a single Pillar Tap (flow upto 4 LPM)

OD : Providing and fixing of CP Sink Cock with wall flange and Swivel Spout of superior quality having maximum flow rate of 4 Litres per Minute

OD : Supply and fixing of PVC Grease Trap with Cover having 1000Ltrs Capacity of approved Quality

OD : Providing and fixing Counter Top Wash Basin with C.I. brackets, 15 mm C.P/Brass Basin Mixer of superior quality having maximum flow rate of 4 Litres per Minute,32 mm C.P. brass waste of standard pattern, CP Bottle Trap (32mm), CP Connection Hose (2Nos) including painting of fittings and brackets, cutting and making good the walls wherever require : Counter Top Wash basin of size 570X420X195 with single Basin Mixer (flow upto 4 LPM)

OD : Supplying and Fixing of 15mm C.P. Urinal push cock of superior quality having maximum flow rate of 2 Litres per Flush and CP tube length not less than 350mm.

OD : Supplying and Fixing CP Robe Hook having a length of not less than 47 mm from wall surface to hook center.

OD : Supplying,fixing, testing of 5 star rated 25 litre Horizontal/Vertical Geyser (Electric Water Heater ) including all accessories of approved Quality

OD : Supplying, fixing of 4 nos of Grab bar and 1 no of Folding type Grab bar with necessary fittings at both side of commode for physically challenged persons all complete as directed.

OD : Supplying and Fixing CP Towel Ring of round shape and outer diameter of ring not less than 178 mm and fixed with SS screws on to the toilet.

OD : Providing and fixing of superior quality CP soap dispenser with glass bottle

OD : Supplying and Fixing of ceramic Urinal Partition having 350 mm length, 675 mm width 130 mm heigth of approved quality

OD : Supplying and Fixing of superior quality CP Soap Dish of not less than 120x120 mm square plate

50.18.7.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

OD : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge- Internal work- Exposed on wall 63 mm dia 6kg/cm2

OD : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes &amp; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge- Internal work- Exposed on wall. 75 mm dia 6kg/cm2

OD : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge- Internal work- Exposed on wall. 110 mm dia 6kg/cm2

OD : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge- Internal work- Exposed on wall. 150 mm dia 6kg/cm2

OD : Supplying, laying and jointing slotted PVC pipe, 150mm dia, 6kg/cm2 with required perforations in trenches of size 35cmx45cm at required slope, disposal of excavated earth, as per<br>specifications etc complete including the cost of all materials, labour etc. and as directed by the Engineerincharge.<br>Care should be taken while laying so that the perforations will be along the bottom of the pipe. The rate to include cost of all materials, labour charges, lead, lift etc complete. 150mm OD(6 kg/cm2)

50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

50.18.8.7.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2

50.18.9.7.1 : Providing and fixing PVC pipes, fittings including of pipes with 1 step PVC solvent cemeent, ternching refilling and testin ogf joints complete as per direection of Engineer Incharede. 63 mm dis pipe 6 Kgf/cm3

50.18.9.9.1 : Providing and fixing PVC pipes, fittings including of pipes with 1 step PVC solvent cemeent, ternching refilling and testin ogf joints complete as per direection of Engineer Incharede. 110 mm dis pipe 6 Kgf/cm5

50.18.9.10.1 : Providing and fixing PVC pipes, fittings including of pipes with 1 step PVC solvent cemeent, ternching refilling and testin ogf joints complete as per direection of Engineer Incharede. 150 mm dis pipe 6 Kgf/cm6

50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall

50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

OD : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work -Buried<br>OD Derived from 50.18.9.10.1<br>200 mm dia 6kg/cm2

OD : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work -Buried<br>OD Derived from 50.18.9.10.1<br>250 mm dia 6kg/cm2

OD : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work -Buried<br>OD Derived from50.18.9.10. 1<br>315 mm dia 6kg/cm2

50.18.9.2.2 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10 Kgf/cm2

50.18.9.3.2 : Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

50.18.9.5.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

OD : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work -Buried. 63 mm dia 10Kgf/cm2

50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

OD : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work -Buried. 75 mm dia 10 Kgf/ cm2

OD : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 75 mm dia 10 Kgf/cm - Internal work- Exposed on wall

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

OD : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge- External work- Exposed on wall. 150 mm dia 6kgf/cm2

50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

OD : Providing and fixing 100mm dia , two piece CP , air tight floor clean out plug of approved quality . 125mm square frame with 100 mm dia openable circular lid

OD : Providing, fixing, testing and commissioning at site 100x100 mm square C.P.cast brass or stainless steel Grating Cover with protection from cockroaches of matching size of multi inlet or trap complete in all respects.

OD : Providing and fixing Rain water Khurra of approved quality

OD : Supply and fixing of 600x600mm DI Heavy Duty Gratings of approved quality

OD : Providing and fixing PVC Adapter Boss of approved quality 110 x 63 mm

OD : Providing and fixing PVC Adapter Boss of approved quality 110 x 50mm

OD : Providing , fixing , testing and commissioning pvc "P" trap with multy inlet or single inlet connection of required sizes of self cleansing design with or without vent arm complete, including cost of masonry or concrete supports cutting and making good the walls and floors where ever required

OD : Providing , fixing , testing and commissioning pvc multy inlet (110x75x50) floor trap of self cleansing design with or without vent arm complete, including cost of masonry or concrete supports cutting and making good the walls and floors where ever required

OD : Providing and fixing GI slotted rail of approved design. projecting 75 mm outside the wall surface and fixed on wall with 2 nos, 6/8 mm dia expansion hold fasteners, including drilling necessary holes in brick wall / CC / RCC surface and the cost of bolts included. The pipes shall be fixed to the already fixed brackets with the help of 8 mm galvanised GI "U" bolts of specified shape and shall be fixed with GI nuts, bolts, washers of suitable size, one bolts on each side of the pipe.

50.18.9.20.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

50.18.9.20.2 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow

50.18.9.20.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

50.18.9.20.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl

50.18.9.20.8 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia End cap

50.18.9.20.9 : Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVC solvent cement-63 mm dia Socket /coupling

OD : Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Y

50.18.9.20.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer

50.18.9.21 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow

50.18.9.21.2 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow

50.18.9.21.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend

50.18.9.21.8 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia End cap

50.18.9.21.9 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Socket /coupling

50.18.9.21.10 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x63 mm dia Reducer

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.2 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

50.18.9.22.11 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling

OD : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Y

50.18.9.22.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap

OD : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 150 mm dia Y

OD : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 150 x 110mm Reducer

50.18.9.22.12 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer

OD : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 150 mm dia Socket/ coupling

18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes

18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes

18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes

18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall. 80 mm nominal outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all uPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. -External work- Exposed on wall. 80 mm nominal outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &amp; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall. 65 mm nominal outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all uPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. - Exposed on wall - Exposed on wall. 65 mm nominal outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all uPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. - Exposed on wall<br>OD Derived from 18.7.6<br>100mm dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all uPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete as per direction of Engineer-in-Charge. -Exposed on wall<br>OD Derived from 18.7.6<br>150mm dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all uPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &amp; fittings, with solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. - Exposed on wall.100mm dia pipes

18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &amp; fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. - Concealed on wall. 50mm outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &amp; fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. - Concealed on wall. 40mm outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &amp; fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. - Exposed on wall. 65mm outer dia pipes

18.9.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work20 mm nominal outer dia pipes

18.9.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes

18.9.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 50 mm nominal outer dia pipes

18.9.7 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 62.50 mm nominal outer dia pipes

18.9.8 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 75 mm nominal outer dia pipes

18.9.9 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 100 mm nominal outer dia pipes

18.9.10 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 150 mm nominal outer dia pipes

OD : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 65mm dia pipe

OD : Providing and fixing ball valve (brass) of approved quality of following sizes.40mm dia

OD : Providing and fixing ball valve (brass) of approved quality of following sizes. 50mm dia

OD : Providing and fixing ball valve (brass) of approved quality of following sizes. 32mm dia

OD : Providing and fixing ball valve (brass) of approved quality of following sizes. 25mm dia

OD : Providing and fixing ball valve (brass) of approved quality of following sizes. 20mm dia

18.19.3.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreVertical

18.19.4..2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreVertical

18.19.5..2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal boreVertical

18.19.6..2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal boreVertical

OD : Providing and fixing GM/Brass non-return valve of approved quality (Screwed end/Flanged End) 80 mm nominal bore Flanged End Vertical/Horizontal

OD : Providing and fixing GM/Brass non-return valve of approved quality (Screwed end/Flanged End):100 mm nominal bore Flanged End Vertical/Horizontal

OD : Providing and fixing GM/Brass Pressure Reducing Valve of approved quality. 80mm dia

OD : Providing and fixing GM/Brass Pressure Reducing Valve of approved quality. 100mm dia

OD : Providing and fixing CI Butterfly valve of approved quality as per IS 13095 of following sizes.150mm dia

OD : Providing and fixing CI Butterfly valve of approved quality as per IS 13095 of following sizes.100mm dia

OD : Providing and fixing CI Butterfly valve of approved quality as per IS 13095 of following sizes. 65mm dia

OD : Providing and fixing CI Butterfly valve of approved quality as per IS 13095 of following sizes.80mm dia

OD : Providing and fixing CI Butterfly valve of approved quality as per IS 13095 of following sizes.50mm dia

OD : Providing and fixing (CI/Forged Brass) Y Strainer of approved quality of following sizes. 150mm dia

OD : Providing and fixing (CI/Forged Brass) Y Strainer of approved quality of following sizes. 100mm dia

OD :Providing and fixing (CI/Forged Brass) Y Strainer of approved quality of following sizes. 80 mm dia

OD :Providing and fixing (CI/Forged Brass) Y Strainer of approved quality of following sizes. 65mm dia

OD : Providing and fixing (CI/Forged Brass) Y Strainer of approved quality of following sizes. 50mm dia

OD : Providing and fixing (CI/Forged Brass) Y Strainer of approved quality of following sizes. 40mm dia

OD : Providing and fixing (CI/Forged Brass) Y Strainer of approved quality of following sizes. 32mm dia

OD : Drilling/Core Cutting of required dia outlets using low vibration mechanical means. Cost to include closing of core cut using appropriate sealant with necessary form work, staging, tools, etc., ( if required) RCC Slabs (Up to 30 cm Thickness) 50 mm-75mm

OD : Drilling/Core Cutting of required dia outlets using low vibration mechanical means. Cost to include closing of core cut using appropriate sealant with necessary form work, staging, tools, etc., ( if required) RCC Slabs (Up to 30 cm Thickness)110mm-125mm

OD : Drilling/Core Cutting of required dia outlets using low vibration mechanical means. Cost to include closing of core cut using appropriate sealant with necessary form work, staging, tools, etc., ( if required) RCC Beams (Up to 30 cm Thickness) 50mm- 75 mm

OD : Drilling/Core Cutting of required dia outlets using low vibration mechanical means. Cost to include closing of core cut using appropriate sealant with necessary form work, staging, tools, etc., ( if required);RCC Beams (Up to 30 cm Thickness)110mm-125mm

OD : ;Providing and fixing Screen Filter of approved quality of following sizes : 1 1/2 Size

OD : Supply, Fixing & Commissioning of End Cap as per the instructions of Architect/Landscape Architect/Engineer In Charge.16mm

OD : Supply, Fixing & Commissioning of flexible, 16mm Tubing complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply, Fixing & Commissioning of Dripper as per the instructions of Architect/Landscape Architect/Engineer In Charge.

OD : Supply, Fixing Commissioning of Poly Thread Adapter as per the instructions of Architect/Landscape Architect/Engineer In Charge.3/4 x 1/2 size

OD : Water Treatment Plant - Supply, Installation, testing and commission Water Pre-Treatment Plant Capacity: 15M3 /Hr, for 6 to 10hrs of continuous operation, complete with High Pressure Sand Filter Made of FRP with 1.3m dia and 1.8m height , Activated Carbon Filter 1.3m dia x1.8m Height ,Iron Removal Filter 1.3m Dia and 1.8m Height with Multiport valves, Filter Feed Pump of 1nos 2cum/Hr @ 20mts Head and 2nos 15cum/hr 30m head etc with Chemical Dosing ,Pressure gauges etc installation complete with using PVC piping upto 5m from the source and upto 5m from the unit Necessary electrical work including cabling termination ,panel with on/off switch and high level indication indication,timer based dosing system etc complete

OD : Sewage Treatment Plant - Supply Installing Testing and Commissioning of 250kld Capacity sewage Treatment Plant of MBBR technology concist of 2nos Coarse Bar screen chamber SS304 Moc Of Clear opening of 10mm ,2nos raw sewage Pump of 12.5cum/hr at 10-12m head,2nos Twin Lobe Rotary air blower of 320cum/hr with presuure of 0.4kg/cm2,15hp ,3nos coarse bubble diffuser with air flow of 7cum/hr ,MBBR media of 22mmx16mmx400m2/m2 black in colour, Fine bubble diffuser of qundity of 3nos of air flow of 6cum/hr sludge transfer pump ,2nos filter feed pump of 12.5cum/hr at 30 to 34m head ,including pressure sand filter,activated carbon filter of size 1300mm diax 1800mm ,Anaerobic media of 1200x600x600 mm size with 0.3mm thick ,pressure gauge,including necessary piping,hypo dising ,chemical dosing ,oil skimmer anoic mixture complete with ultra Filtration system and components and Non comprehensive AMC inclusive of day shift maintanace technican etc complete for one year

OD : Supply Installing,Testing and commissioning of IOT based Real Time monitoring system with automation used for trouble shooting sewers of 250kld stp with following parameters PH,Turbidity,oxidation control Monitoring 3 level of tanks including annual maintanance cost etc Complete.

OD : Compostable Food Waste Convertor:<br>Supply installing Testing and Commisioning of Compostable Waste Processor constructed of High Quality Durable Stainless Steel with an automated on-site compostable waste dehydration system that dehydrates compostable waste using an energy-efficient control process with input feeding rate of 50kg of 12-16hrs processing time with power conssumption of 2.8kw and dimension of 1140x900x1100 with unit weight of 345kg at tank volume of 3cu feet handling of all type waste such as food scraps, Cooked bones,Papers etc complete

OD : Supply Installing , testing and commissioning of Hydro pneumatic Pump For Under Ground Water Tank Filling type - Vertical multistage pump with single VFD .The system shall comprises of pump, precharged pressure tank Volume of required capacity, pressure switch ,control valve,non return valve ,Control panel etc, complete with power of - 11KW, Phase - 3Ph, RPM -2900 required duty conditions mounted on common base plate and wiring from panel to the motor including air volume controls, etc., complete.a. Flow Rate :20 LPS @30 mtr head per pump.((2W+1S) - Domestic Water Supply

OD : Supply ,installing ,testing and commissioning of Open well submersible Type Domestic Water Supply -Supply, pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 5.83 lps , Head range 43 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, PhaseReversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge, Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work.

OD : Supply installing, testing and commissioning of Open well submersible Type Domestic Water Supply -, pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should becapable to deliver 6 lps,Head range 47 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) StarDelta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge,Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work

OD : Supply Installing, testing and commissioning of Open well submersible Type Domestic Water Supply - ,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 6.57 lps,Head range 40 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge, Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work

OD : Supply,Installing, testing and commissioning of Open well submersible Type Domestic Water Supply - ,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should becapable to deliver 1.88 lps,Head range 20 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge, Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work

OD : Supply ,installing, testing and commissioning of Open well submersible Type Flushing Water Supply - ,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 2.6 lps,Head range 63 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge, Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work.

OD : Supply,installing,testing and commissioning of Open well submersible Type Flushing Water Supply - ,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should becapable to deliver 2.6 lps,Head range 56 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge,Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work

OD : Supply ,installing, testing and commissioning of Open well submersible Type Flushing Water Supply - ,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 2.6 lps,Head range 56 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge,Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work.

OD : Supply,Installing, testing and commissioning of Open well submersible Type Flushing Water Supply - ,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 4.4 lps,Head range 48mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge,Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work

OD : Supply,installing, testing and commissioning of Open well submersible Type Flushing Water Supply - ,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 5 lps,Head range 46mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge, Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work.

OD : Supply ,installing, testing and commissioning of Open well submersible Type Flushing Water Supply - ,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should becapable to deliver 1.8 lps,Head range 20 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge,Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work.

OD : Supply installing, testing and commissioning of Open well submersible Type Domestic Water Supply -,pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 6 lps,Head range 47 mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge,Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work.

OD : Supply,installing, testing and commissioning of Open well submersible Type Raw Water Pumping Line Fro Pond To Master UGT - , pump set, having SS Impeller and Shafts, CI/SS Casing, Mechanical SealEach pumps should be capable to deliver 15 lps,Head range 20mtrs , ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as( 2Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run,Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digitaldisplay,Pressure gauge, Float Switches, Auto/Manuel Operation. The price is inclusive of all connected electrical work.

OD : Supply,Installing, Testing and Commisssioning of Sewage & Waste Water Transfer Pump & Accessories Shall be Heavy Duty, Durable & Long Lasting Cutter Pumps with IE3 Rated Electrical Motors, One Working + Cyclically Stand by with Microprocessor Based Control Panel, for Auto and Cyclic Operation, Float Switches, for Auto Start and Stop of Pumps, Feet / Base, Stainless Steel (Grade:304) Lifting Chains,auto Coupling set etc, complete Cable length all Cutter Pumps shall be 10 Mtr. Minimum Capacity: 5.5LPS @ 20 Mtr. Head, 3Ph, Complete Set.

OD : Supply,installing ,Testing and Commission Submersible Type Storm Water Transfer Dewatering Pump Set,complete set with 1 working + 1 Standby Submersible non- clog pump , Solids handling: 40mm , and with Common Control Panel for automatic operation and Manually change over facility. Capacity 5.5lps.at 10 Mtrs. head, each, with Three Phase with float switches/level sensors etc. necessary control valves,Pressure Gauges fittings and accessories, for discharging rain water from collection pits in basement floor, to lower strata. The price shall inclusive of all connected electrical work as detailed in the technical specification.

OD : Supplying, Installation, testing and commissioning of Dewatering pumps (submersible type) Suitable for minimum 30mm solid handling capacity having 3 mtr to 19 mtr head. Discharge up to 1000 LPM to 50LPM and working with 415V, 3ph and 50 Hz frequency (1working )

OD : Supplying, Installation, testing and commissioning of borewell pump (submersible type) Suitable for 45 mtr to 218 mtr head. Discharge up to 100LPM to 40 LPM. and working with 415V, 3ph and 50 Hz frequency

OD : Providing and fixing Water Meter of approved quality of following sizes.40mm dia

OD : Providing and fixing Water Meter of approved quality of following sizes 50mm dia

OD : Providing and fixing Water Meter of approved quality of following sizes.65mm dia

OD : Providing and fixing Water Meter of approved quality of following sizes.80mm dia

OD : Providing and fixing Water Meter of approved quality of following sizes.100mm dia

OD : Providing and fixing Water Meter of approved quality of following sizes.150mm dia

OD : Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:100 mm dia NP3 R.C.C. pipe

OD : Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:150 mm dia NP3 R.C.C. pipe

OD : Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:200 mm dia NP3 R.C.C. pipe

OD : Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:250 mm dia NP3 R.C.C. pipe

OD : Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia NP3 R.C.C. pipe

OD : Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc.complete:350 mm dia NP3 R.C.C. pipe

OD : Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:400 mm dia NP3 R.C.C. pipe

OD : Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc.complete:450 mm dia NP3 R.C.C. pipe

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

OD : Supply and Installation of factory fabricated GI NON perforated Cable tray with cover of following sizes as per specifications with all required accessories .300mm width x 60mm depth x 1.0mm thickness

OD : Supply and Installation of factory fabricated GI NON perforated Cable tray with cover of following sizes as per specifications with all required accessories .200mm width x 60mm depth x 0.7mm thickness

OD : Supply and Installation of factory fabricated GI NON perforated Cable tray with cover of following sizes as per specifications with all required accessories .150mm width x 60mm depth x 0.7mm thickness

OD : Supply and installation of projector system 3-LCD 3 chip technology / native resolution; 1280 X 800 (W X GA) Colour Brightness : 4200 lumens/ white brightness : 4200 lumens.

OD : Supply and installation of Class D Amplifier 2 channel;2 x 900 Watts @ 4 Ohm

OD : Supply and laying of Outdoor Cat 6 UTP Cable through exisiting conduits/trench

OD : Supply and Installation of CAT 6 Information Outlet

OD : Supply and installation of cat 6 RJ 45 connectors with boot

OD : Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 em below ground level) including excavation and refilling the trench but excluding sandcushioning and protective covering etc. , complete as required.<br>40 mm Size

OD : Supply and laying of HDPE Pipe 40mm

OD : Supply and installation of PoE Ethernet surge protection device

OD : Supply and fixing of the Weatherproof junction of box with necessary accessories for pole mounting for placing the surge protection devices

OD : supply installation testing and commissioning of GI pole of min 4m height, 3 inch diameter, class B with property finished with painting as required. Pole drilling for cable entry, base plate etc, necessary mounting clamps as required

OD : Supply and installation of 08 port PoE Mangeable Gigabyte switch with 2x 1G SFP Uplink

OD : Supply and installation of Distribution Switch - 16-port Gigabit SFP managed Switch with 16 x 1G Port,Layer 3 with minimum 2 SFP uplinks, Power supply unit , necessary cables

OD : Supply and installation of 1G SFP Module LC duplex Single Mode

OD : Supply and installation of 6 core Single Mode OS2 armoured fibre cable

OD : Supply and installation of 12 port rack mountable LIU fully loaded with LC duplex adaptor, couplers,1.5mtr SM OS2 LC pigtails, blank plates with rack mounting accessories

OD : Supply and installation of 24 port rack mountable LIU fully loaded with LC duplex adaptor, couplers,1.5mtr SM OS2 LC pigtails, blank plates with rack mounting accessories

OD : Supply and installation of Fiber Optic Patch Cord LC-LC, Duplex, Single Mode, 3 metre

OD : Supply, Installation, testing & commissioning of 4MP 30X IR Network PTZ camera. 1/2.8" CMOS image sensor, WDR, IR range of 150 Mtr, IP66, PoE with all connectors and necessary accessories for mounting on pole or wall

OD : Supply and installation of 55'' HD LED MONITOR

OD : Supply of cable Tie (100 No's pack)

OD : Supply of velcro tie 19mm 25 Mtr Roll

OD : Supply and laying of 20mm PVC Felxible Conduit

OD : Supply and installation of Horizontal cable manager

OD : Supply and laying of 10 pair raiser Cable 0.5 mm solid annealed copper, (FR) PVC high density polyethylene telephone riser cable.

OD : Supply and installation of 19 ''; 42U 800x1000 rack with front lockable glass door, PDU/6soc/5A/indian round pin x 1 No, 1 U horizontal cable manager 1 Nos, 1U shelf - 1 No and all other mounting accessories

OD : Supply and installation of 19";15U wall mount rack with front lockable glass door, PDU/6soc/5A/indian round pin x 1 No, 1 U horizontal cable manager 2 Nos, 1U shelf - 1 No and all other mounting accessories.

OD : Supply and installation of 22U Network rack , 600 x 650mm with glass Door, Side Panels, 2 No of Horizontal shelfs, 4 No of Rack Air Circulation module, 1 No of Rack mountable Horizontal PDU with 6 Sockets, 5 No of Horizontal Cable Manager , Lock & Key and Mounting Accessories.

OD : Supply, installation, testing and commissioning of 9U Rack with front lockable glass door, PDU/6soc/5A/indian round pin x 1 No, 1 U horizontal cable manager 3 Nos, 1U shelf - 1 No and all other mounting accessories.

OD : Supply & Fixingof 4x4 or suitable weatherproof moulded plastic co box on surface with cover plate for CCTV ,IP Rated.

OD : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including 3x3 or suitable size moulded plastic Camera Co box on surface

OD : Supply and installation of Cat6 UTP , Patch Panel - 24 ports fully loaded patch panel with rear strain release bar.

OD : Supply and installation of 2 Meter Cat 6 UTP Patch Cord

OD : Supply and installation of 1 Meter Cat 6 UTP Patch Cord

OD : Supply and installation of Cat 6 RJ 45 Field Termination Module.

OD : Supply and installation of Cat 6 RJ 45 Connectors with boot.

OD : Supply and installation of Information Outlet Category 6 , RJ-45 Information Outlet with IDC Connector terminations

OD : Supply and installation of 10 SFP Single Mode LC Duplex Fiber

OD : Supply and installation of 1G SFP Single Mode LC Duplex Fiber

OD : Supply and installation of Wireless Access Point -indoor 802.11ac Long Range Access Point, Dual band antenna(2.5Ghz and 5GHz), PoE, 802.3af, 400 Mbps (2.4Ghz), 867 Mbps (5GHz), Up to 1.2 Gbps

OD : Supply and installation of NGFW Firewall with 8 x GbE copper, 2 x SFP fiber, 30,000 Mbps Throghput, 6,500,000 Concurrent connections. Three year warranty

OD : Supply and installation of 24 Port 10G SFP Layer 2 managable Distribution Switch. Three year warranty.

OD : Supply and installation of Layer 2 manageable PoE switch with Non blocking switch fabric having 24 Port 10/100/1000Mbps PoE & 2x1G SFP port. Three year warranty

OD : Supply and installation of Layer 2 managable PoE switch with Non blocking switch fabric having 24 Port 10/100/1000Mbps PoE 2x10G SFP port. Three year warranty.

OD : Supply and installation of Layer 2 managable Non PoE switch with Non blocking switch fabric having 24 Port 10/100/1000Mbps Non PoE 2x10G SFP port. Three year warranty

OD : Supply and installation of Layer 2 managable Non PoE switch with Non blocking switch fabric having 24 Port 10/100/1000Mbps Non PoE 2x1G SFP port. Three year warranty

OD : Supply, Fixing, testing and commissioning of 6 module Matt aluminium finish pop up box with slim design for perfect integration into furniture equipped with two number 6A socket and two number 6A switch supplied along with installation kits for table tops and all accessories as required for complete installation including making good any damages made, as instructed by engineer in charge, providing connections etc as required.

OD : Supply, Fixing, testing and commissioning of 3 module Matt aluminium finish pop up box with slim design for perfect integration into furniture equipped with two number 6A socket and two number 6A switch supplied along with installation kits for table tops and all accessories as required for complete installation including making good any damages made, as instructed by engineer in charge, providing connections etc as required.

OD : Splicing Charge

OD : Supplying and fixing 32 amps, 5 pin, three phase industrial type, plastic socket outlet, on surface or in recess and complete with connections, testing and commissioning etc. as required.

OD : Supply and installation of Fiber Optic Patch Cord LC-LC, Duplex, Single Mode, 3 metre

OD : Supply and installation of 24 port rack mountable LIU fully loaded with LC duplex adaptor, couplers, 1.5mtr SM OS2 LC pigtails, blank plates with rack mounting accessories

OD : Supply and installation of 6 port rack mountable LIU fully loaded with LC duplex adaptor, couplers, 1.5mtr SM OS2 LC pigtails, blank plates with rack mounting accessories.

OD : Supply and installation of 6 core Single Mode OS2 armoured fibre cable

OD : Supply and installation of 15 mtrs HDMI cable

OD : Supply and installation of 43'' HD LED monitor

OD : Supply and installation of 32'' HD LED monitor

OD : Supply and installation of 6 TB Surveillance hard disk

OD : Supply and installation of 64 Channel NVR support upto 8MP at 320mbps or higher , Supports 4K,8 HDD SATA supports upto 8TB each , HDMI,VGA support, H264/H.265 Compression,Onvif profile.Three year warranty.

OD : Supply and installation of 32 Channel NVR support upto 8MP at 320mbps or higher , Supports 4K,8 HDD SATA supports upto 8TB each , HDMI,VGA support, H264/H.265 Compression,Onvif profile.Three year warranty.

OD : Supply and installation of 4MP IP Bullet Camera, 3.6mm or optional fixed lens , H.265 /H.264 encoding, Day/Night (ICR), 120WDR, IR LEDs Length 30m, Onvif, IP67, PoE.

OD : Supply and installation of 4MP IP Dome Camera, 2.8mm or optional fixed lens , H.265 /H.264 encoding, Day/Night (ICR), 120Db WDR, IR LEDs Length 30m , Onvif , IP66 or Higher, PoE.

OD : Supply, Installation,testing and commissioning of fixed Bullet Camera with 4 MP built-in IR LED upto 30 mtr or higher, POE , H.265/H.265+, WDR, Onvif. IP 67 with all connectors and necessary accessories for mounting in false ceiling/True Ceiling

OD : Supply and installation of the EPABX system of 96 analog extension. Expandable,3 analog trunk, IP ready ISDN Compatible, Inbuilt VoIP, lightning protector for analog trunk lines, Port for Operator Console.Three-year warranty

OD : Supply and installation of the EPABX system of 40 analog extension. Expandable,3 analog trunk, IP ready ISDN Compatible, Inbuilt VoIP, lightning protector for analog trunk lines, Port for Operator Console.Three-year warranty

OD : Supply and installation of the EPABX system of 32 analog extension. Expandable,3 analog trunk, IP ready ISDN Compatible, Inbuilt VoIP, lightning protector for analog trunk lines, Port for Operator Console.Three-year warranty

OD : Supply and installation of the EPABX system of 16 analog extension. Expandable,3 analog trunk, IP ready ISDN Compatible, Inbuilt VoIP, lightning protector for analog trunk lines, Port for Operator Console.Three-year warranty

OD : Supply and installation of the EPABX system of 8 analog extension. Expandable,3 analog trunk, IP ready ISDN Compatible, Inbuilt VoIP, lightning protector for analog trunk lines, Port for Operator Console.Three-year warranty

OD : Supply and installation of IP Extension

OD : Supply and installation of IP Phones

OD : Supply and installation of CLI Phones

OD : Supply and instalaltion of 25 Port Voice Panel

OD : Supply and installation of 50 Port Krone Box with module

OD : Supply and Laying of 2C 14 AWG (BFR) PVC Speaker cable

OD : Supply and installation of 480W booster Amplifier

OD : Supply and installation of 6 Zone Voice Alarm controller

OD : Supply and installation of 12W Wall mount Speaker

OD : Supply and installation of 30W Wall mount Speaker

OD : Supply and installation of Exit Push button

OD : Supply and installation of Single Leaf Door EM Lock with necessary mounting accessories

OD : Supply and installation of Mifire card

OD : Supply and installation of software with licence of Time attendance system for 400 Users

OD : Supply and installation of software with licence of Time attendance system for 800 Users

OD : Supply and installation of Finger Print and RF card Based Door Controller with 3.5" Touch Screen, Mifare Smart Card Reader Module (High Frequency:13.56 MHz), support EM Prox. card module, POE, 500,000 Events and 9600 Finger Template, IP 65

OD : Supply and installation of 120W Mixer amplifier

OD : Supply and installation of 240W Mixer amplifier

OD : Supply and installation of auditorium audio solution

OD : Supply and installaion of Speaker cable with Electronic, 2 Conductor 16AWG (19x29) Tinned Copper, PVC

OD : Supply and installation of 15 U Floor Mount net work Rack with glass door including required PDU and mountind accessories (AV system)

OD : Supply and installation of 27 U Floor Mount net work Rack with glass door including required PDU and mountind accessories (AV system)

OD : Supply and installation of Speaker Bracket

OD : Supply and installation of Pins & Connectors

OD : Supply and installation of Floor Mount Popup Box with 4 XLR Inputs

OD : Supply and installation of Floor standing mic stand

OD : Supply and installation of Cardoid, Dynamic Microphone with on/off switch

OD : Supply and installation of Unidirectional condenser microphone u Flexible stem

OD : Supply and installation of 12-Channel Mixing Console,Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo)

OD : Supply and installation of 12" powered Stage Monitor Speaker with bluetooth audio, Highefficiency 1000 W

OD : Supply and installation of DSP 2 x 950 W Power Amplifier Maximum Output Power, Dual Channe

OD : Supply and installation of 18" Passive subwoofer 1600 W (peak), 133 dB peak SPL

OD : Supply and installation of 12" passive loudspeaker,1200 W (peak), 128 dB peak FOH & Delay speakers

OD : Supply and Installation of Popup HDMI Box

OD : Supply and Installation of Pins & Connectors in Class Room

OD : Supply and Installation Floorstanding equipment rack with shelves,PDU,Dual fan ,accessories etc

OD : Supply and Laying of Audio Cable, CM-Rated, 1-24 AWG stranded high-conductivity bare copper pair with PVC insulation, +90% bare copper spiral shield, PVC jacket

OD : Supply and Installation of HDMI Audio Embedder / De-Embedder, HDCP 1.4

OD : Supply and Installation of 10 Meter HDMI Cable

OD : Supply and Installation of 3 Meter HDMI Cable

OD : Supply and Laying of Wireless Hanhdheld Microphone

OD : Supply and Installation of Wireless Headworn Microphone

OD : Supply and Installation of Gooseneck Condenser Microphone

OD : Supply and Installation of 120 W Power amplifier

OD : Supply and Installation of 10-Channel Mixing Console Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo) 1 Stereo Bus 1 AUX (incl. FX)

OD : Supply and Installation of Ceiling mount for projector

OD : Supply and Installation of 120" Diagonal Motorised Projection screen with remote

OD : Supply and Installation of Projection System: 3LCD, 3-chip technology/Native Resolution: 1280 x 800 (WXGA) Color Brightness: 4200 lumens1/White Brightness: 4200 lumens

OD : Supply,Installation Testing and Commissioning of AV Equipment Rack

OD : Supply of Stereo Audio/Control Cable

OD : Supply and laying of Shielded Cat6 cable

OD : Supply and laying of Microphone bulk cable

OD : Supply of Class D Amplifier 2 channel;2 x 900 Watts @ 4 Ohms

OD : Supply and Installation of 24W Wall mount for the speakers

OD : Supply and Installation Wall speaker 480-Watt 10" speaker

OD : Supply of Manual mixer 16-Input 2/2-Bus Mixer with XENYX Mic Preamps &amp; Compressors, British EQs, 24-Bit Multi-FX Processor and USB/Audio Interface

OD : Supply of Lapel Microphone :UHF Wireless mic Multiple band with 10 channels on each band

OD : Supply of Gooseneck Microphone with microphone table stand

OD : Supply of Wireless Cardioid dynamic handheld microphone

OD : Supply of Flexible 6ft HDMI Cable

OD : Supply of HDMI Audio De-embedder

OD : Supply of Wallplate HD BaseT TX/RX for HDMI and VGA

OD : Supply of 165" motorsied screen , 16:10 , Mattwhite with black drop

OD : Supply of Heavy duty mount for projector with 4x4 descent

OD : Supply of Ultra Short throw Laser projector with 7000 Lumens ,WUXGA resolution

OD : Supply and Installation of 24 key console phone

OD : Supply and Installation of 6W ceiling mount speaker

OD : Supply, Installation, Testing & Commissioning of Electric motor driven, End suction Top Discharge Fire Fighting main pump with cast iron impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 1620 LPM with 90 Meter Head.

OD : Supply, Installation, Testing & Commissioning of Diesel Engine Driven, End Suction Top Discharge Pump coupled to Water Cooled Diesel Engine of adequate HP , with bronze impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest&nbsp; and farthest outlet at a specified flow of 1620 LPM with 90 Meter Head.

OD : Supply, Installation, Testing & Commissioning of Electric motor driven, End suction Top Discharge Fire Fighting main pump with cast iron impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 1620 LPM with 80 Meter Head.

OD : Supply, Installation, Testing & Commissioning of Diesel Engine Driven, End Suction Top Discharge Pump coupled to Water Cooled Diesel Engine of adequate HP , with bronze impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 1620 LPM with 80 Meter Head.

OD : Supply, Installation, Testing & Commissioning of fire fighting jockey pump, End Suction Top Discharge Pump coupled to Water Cooled Diesel Engine of adequate HP , with bronze impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 180 LPM with 80 Meter Head.

OD : Supply, Installation, Testing & Commissioning of fire fighting terrace pump, with Cast Iron casing and cast iron impeller to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 900 LPM with 35 Meter Head.

OD : Supply, Installation, Testing & Commissioning of fire fighting terrace pump, with Cast Iron casing and cast iron impeller to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 450 LPM with 35 Meter Head.

OD : Supply,Installing, Testing and Commisssioning of Sewage & Waste Water Transfer Pump (minimum IE2) & Accessories Shall be Heavy Duty, Durable & Long Lasting Cutter Pumps with One Working + Cyclically Stand by with Microprocessor Based Control Panel, for Auto and Cyclic Operation, Float Switches, for Auto Start and Stop of Pumps, Feet / Base, Stainless Steel Lifting Chains,auto Coupling set etc, complete Cable length all Cutter Pumps shall be 10 Mtr. Minimum Capacity: 5.5LPS @ 20 Mtr. Head, 3Ph,Complete Set

OD : Supply, Installation, Testing & Commissioning of Electric motor driven, End suction Top Discharge Fire Fighting main pump with cast iron impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 2280 LPM with 85 Meter Head.

OD : Supply, Installation, Testing & Commissioning of Diesel Engine Driven, End Suction Top Discharge Pump coupled to Water Cooled Diesel Engine of adequate HP , with bronze impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 2280 LPM with 85 Meter Head.

OD : Supply, Installation, Testing & Commissioning of fire fighting jockey pump, End Suction Top Discharge Pump coupled to Water Cooled Diesel Engine of adequate HP , with bronze impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at a specified flow of 180 LPM with 85 Meter Head.

OD : Supply,Installing, Testing and Commisssioning of Fire Fighting Jockey Pump, End suction Top Discharge with cast iron impeller with stainless steel shaft,Cast Iron casing to ensure a minimum pressure of 3.5 kg/sq.cm. at highest&nbsp;and farthest outlet at a specified flow of 180 LPM with 90 Meter Head.

OD : Supply, Installation, Testing & Commissioning of Combined type Automatic Motor Control Panel with necessary Star Delta Starters, Indication Lamps etc. for Main, Jockey and Diesel Pump. The starter panel has to be designed based on BOQ item no. 1259, 1260,1261 and 1262 and the rate shall be coated accordingly.

OD : Supply, Installation, Testing & Commissioning of Combined type Automatic Motor Control Panel with necessary Starters,for 900 LPM fire terrace pump

OD : Supply, Installation, Testing & Commissioning of Combined type Automatic Motor Control Panel with necessary Starters,for 450 LPM fire terrace pump

OD : Supply, Installation, Testing & Commissioning of Pressure Guage of 100mm dia, 0 - 200 psi as per requirement.

OD :Supply, Installation, Testing & Commissioning of Pressure Switch as per requirement.

OD : Supply, Installation, Testing & Commissioning of CI Butterfly Valve (PN 16) Slim Seal Standard Lever operated type having quality rubber seating, disc with required flanges, nuts, bolts etc complete.150 mm dia

OD : Supply, Installation, Testing & Commissioning of CI Butterfly Valve (PN 16) Slim Seal Standard Lever operated type having quality rubber seating, disc with required flanges, nuts, bolts etc complete. 100mm dia

OD : Supply, Installation, Testing & Commissioning of CI Butterfly Valve (PN 16) Slim Seal Standard Lever operated type having quality rubber seating, disc with required flanges, nuts, bolts etc complete. 80 mm dia

OD : Supply, Installation, Testing & Commissioning of Check Valve (Non-Return Valve) -Wafer type with required flanges, Nuts, Bolts and Gaskets etc.complete. 100 mm dia

OD : Supply, Installation, Testing & Commissioning of Check Valve (Non-Return Valve) -Wafer type with required flanges, Nuts, Bolts and Gaskets etc.complete. 80 mm dia

OD : Supply, Installation, Testing & Commissioning of Y-Strainer with required Flanges, Nuts, Bolts and Gaskets etc.complete. 150 mm dia

OD : Supply, Installation, Testing & Commissioning of Y-Strainer with required Flanges, Nuts, Bolts and Gaskets etc.complete. 100 mm dia

OD : Supply, Installation, Testing & Commissioning of Air cushion vessel of 200mm dia with automatic air release valve with drain pipe, drain valve and a shut off and 120cm height complete.

OD : Supply, Installation, Testing & Commissioning of brass air release valve, 25mm dia with necessary coupling to be fitted on top of the riser.

OD : Supply, Installation, Testing & Commissioning of ball valve with fittings etc complete. 25mm

OD: Supply, Installation, Testing & Commissioning of ball valve with fittings etc complete.15mm

OD : Supply, Installation, Testing & Commissioning of Branch Control Valve Assembly for Sprinkler System. 65 mm

OD : Supply, Installation, Testing & Commissioning of Branch Control Valve Assembly for Sprinkler System. 80 mm

OD : Supply, Installation, Testing & Commissioning of Branch Control Valve Assembly for Sprinkler System. 100 mm

OD : Supply, installation, testing & commissioning of Flexible connections of suitable pressure rating to be installed at pump inlet and outlet.150 mm dia

OD : Supply, installation, testing & commissioning of Flexible connections of suitable pressure rating to be installed at pump inlet and outlet. 100 mm dia

OD : Supply, installation, testing & commissioning of Flexible connections of suitable pressure rating to be installed at pump inlet and outlet. 80 mm dia

OD: Supply and laying of 'MS' C class pipe with necessary fittings.The pipe shall be coated with oil primer and 2 coats of final red paint. 200 mm dia

OD : Supply and laying of 'MS' C class pipe with necessary fittings.The pipe shall be coated with oil primer and 2 coats of final red paint. 150 mm dia

OD : Supply and Laying of 'MS' C class Pipe for Hydrant System with fittings.The Pipe shall be coated with Oil Primer and 2 Coats of final Red Paint. 100 mm dia

OD : Supply and Laying of 'MS' C class Pipe for Hydrant System with fittings.The Pipe shall be coated with Oil Primer and 2 Coats of final Red Paintv. 80mm dia

OD : Supply and Laying of 'MS' C class Pipe for Hydrant System with fittings.The Pipe shall be coated with Oil Primer and 2 Coats of final Red Paintv. 65mm dia

OD : Supply and Laying of 'MS' C class Pipe for Hydrant System with fittings.The Pipe shall be coated with Oil Primer and 2 Coats of final Red Paintv. 50mm dia

OD : Supply and Laying of 'MS' C class Pipe for Hydrant System with fittings.The Pipe shall be coated with Oil Primer and 2 Coats of final Red Paintv. 40mm dia

OD : Supply and Laying of 'MS' C class Pipe for Hydrant System with fittings.The Pipe shall be coated with Oil Primer and 2 Coats of final Red Paintv. 32mm dia

OD : Supply and Laying of 'MS' C class Pipe for Hydrant System with fittings.The Pipe shall be coated with Oil Primer and 2 Coats of final Red Paint. 25mm dia

OD : Supply and laying of 'GI' C class pipe with necessary fittings.The pipe shall be coated with oil primer and 2 coats of final red paint.100 mm dia

OD : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

OD : Supply and wrapping with Tarfelt (1mm Thickness) material for Under Ground Pipes.

OD : Supply, Installation, Testing & Commissioning of Draw out connection with 100mm dia

OD : Supply, Installation, Testing & Commissioning of Fire Brigade Inlet 4 Way Gunmetal 63mm male instantaneous inlets.

OD : Supply, Installation, Testing & Commissioning of Fire Brigade Inlet 3 Way Gunmetal 63mm male instantaneous inlets.

OD : Supply, Installation, Testing & Commissioning of 100 mm cast iron foot valve for draw out connection.

OD : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) for framed work, including cutting, hoisting, fixing in position and finishes with two or more coats of synthetic enamel paint of approved brand and manufacture of required colour with priming coat of approved steel primer using structural steel etc. as required. In supporting frames and similar works

OD : Supply and Laying of Exhaust pipe for Diesel engine with M.S. Class B pipes duly insulated with 50mm rock wool and aluminium cladding.100mm dia

OD : Supply, Installation, Testing & Commissioning of 100mm dia Sprinkler Alarm Valve of Cast Iron Body and Bronze working parts comprising of Water Motor Alarm, Bronze Seat Clapper, and Clapper Arm, Hydraulically Driven Mechanical Gong Bell to Sound continuous Alarm when the Sprinkler system activates.

OD: Supply, Installation, Testing & Commissioningof quick response, standard coverage sprinkler pendant type with 15mm screwed end connection of 68 deg.C, 5.6K

OD: Supply, Installation, Testing & Commissioning of Stainless Steel Unbraided Flexible Pipe (hose) for droping sprinklers below false ceiling,and upto 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as required.

OD : Supply, Installation, Testing & Commissioning of standard rossette with cover plates for pendent sprinklers with 15mm screwed end connection.

OD : Supply, installation, testing & commissioning of MS ERW pipes confirming to IS 1239 Part-1, heavy grade C class pipes for sizes upto 150NB and MS pipes confirming to IS 3589 with a minimum wall thickness of 6.35mm for sizes 200 NB & above including welding, paints, pipe supports all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required.Rate shall include cost of one coat of epoxy primer & two coats of synthetic enamel paint.<br>50 mm diameter and below, Socket welded joints shall be used and for pipes above 50 mm diameter, Butt welded joints shall be used. 65mm dia

OD : Supply, Installation, Testing & Commissioning of Wall Mounted P A Speaker 10W in CRCA sheet fabricated with L M T for Talk back facility Having Push to Talk Switch compatiable Speaker to play Music with precise Voice clarity.

OD : Supply, Installation, Testing & Commissioning of 2 Litre K Type Extinguishers for Kitchen.

OD : Supply, Installation, Testing & Commissioning of Single Headed Hydrant Valve SS suitable for 63 mm Flanged Inlet, Female Instantaneous outlet, complete with Cap Chain etc.

OD : Supply, Installation, Testing & Commissioning of Single Headed Yard Hydrant Valve SS suitable for 63 mm Flanged Inlet, Female Instantaneous outlet, complete with Cap Chain etc.

OD : Steel work of chequered plate, including cutting, hoisting, fixing in position and applying a priming coat and two coats of enamel paint of required<br>colour. as required. using60x60 MS angle as outer frame,50mm wide MS flat as intermediate section, including all cost of materials, labour<br>charges etc, complete (1sqm=59.39kg)

OD : Supply, Installation, Testing & Commissioning of 63 mm dia RRL tested to a bursting pressure of 32kg/sq.cm made of superior quality cotton and nylon jacket each of length 15mtrs.complete with heavy quality SS coupling.

OD : Supply, Installation, Testing & Commissioning of SS branch Pipe with 63 mm female instantaneous inlet, male threaded outlet complete with hex. based nozzle heavy quality.

OD : Supply, Installation, Testing & Commissioning of Hose Reel Drum LPCB approved, EN Standard 30m long Hose.

OD : Supply, Installation, Testing & Commissioning of Hose Box Double Door

OD : Making of openings in structural ( RCC ) walls / slabs / beam for passage of pipes / cables using suitable core cutting machinery for the follwing sizes and making good of the openings after passage of services including clearing of debris. 100mm

OD : Making of openings in structural ( RCC ) walls / slabs / beam for passage of pipes / cables using suitable core cutting machinery for the follwing sizes and making good of the openings after passage of services including clearing of debris. 150mm

OD : Supply, Installation, Testing & Commissioning of ABC Type Fire Extinguishers 6kg capacity.

OD : Supply, Installation, Testing & Commissioning of CO2 Type Fire Extinguishers 4.5 kg capacity.

OD : Supply, Installation, Testing & Commissioning of modular type clean agent fire exctigushers 5 kg capacity

OD : Supply, Installation, Testing & Commissioning of Conventional Fire Alarm Control 8 Zone Panel with Battery back up for 24 Hours normal operation & 30 Minutes Alarm Operation. Control Panel, Battery Charger etc,

OD : Supply, Installation, Testing & Commissioning of Conventional Fire Alarm Control 4 Zone Panel with Battery back up for 24 Hours normal operation & 30 Minutes Alarm Operation. Control Panel, Battery Charger etc,

OD : Supply, Installation, Testing & Commissioning of Conventional Fire Alarm Control 2 Zone Panel with Battery back up for 24 Hours normal operation & 30 Minutes Alarm Operation. Control Panel, Battery Charger etc,

OD : Supply, Installation, Testing &amp; Commissioning of Conventional Horn & Strobe(Sounder with Flasher) for Audible annunciation visual indication.

OD : Supply, Installation, Testing & Commissioning of Conventional Manual Call Point (Resettable type).

OD : Supply and laying of 2X1.5 SQMM PVC Insulated and Sheated Armoured (FRLS) Copper Fire Alarm Cable

OD : Supply and laying of 2X1.5 SQMM PVC Insulated (FRLS) Flexible Copper Fire Alarm Cable

OD : Supply, installation, testing and commissioning of 6W wall mounted talk back unit for two way communication of fire fighters including necessary accessories complete as required having Push to Talk Switch compatible speaker.

OD : Supply & laying of 4X1.5 SQMM PVC Insulated and Sheated Armoured(FRLS) Copper Fire Alarm Cable for Fire Alarm System

OD : Supply and laying of 4X1.5 SQMM PVC Insulated (FRLS) Flexible Copper Fire Alarm Cable

OD : Supply,Installation,Testing & Commissioning of Conventional Beam Detector

OD : Supply,Installation,Testing & Commissioning of Conventional smoke Detector with base

OD : Supply,Installation,Testing & Commissioning of Conventional multi Detector witth base

OD : CO (Carbon Monoxide) Detector / Sensors Supply, Installation, Testing and Commissioning of wall mounted/ column mounted CO detectors/ sensors forth basement.

OD : Supply, Installation, Testing and Commissioning of basement fan/sensor control panel with inbuilt PLC controller equppied with 4 numbers of feeders for multi-speed jet fans, 2 No.s of star-delta starters for axial fans, 3 No.s 4-20 mA CO sensors, individual fan control, fan speed variation as per demand, clock timers etc. Control panel shall be able to operate as per the commands from BMS, clock timer, gas sensors etc during normal mode, and shall react to fire alarm control panel during fire mode.

OD : Supply and Installation of Floor Identification Signage.

OD : Supply and Installation of Fire Exit Signage.

OD : Supply and Installation of Fire Cabinet Signage.

OD : Supply and Installation of Manul Call Point Signage.

OD : Supply and Installation of Fire Extinguisher Signage

OD : Supply and Installation of Directional Signage.

OD : Supply and Installation of Exit Light (Double Sided) with Battery Backup

OD : Supply and Installation of Fire Escape Route Map

M/s PST Engineering Construction