SPECIAL REPAIR TO BLDG NO 2 HALF MOON LINE AND ROOF OF BLDG NO 64/63 OF OLD KUMAON VIHAR AT RANIKHET UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainital pattern or similar pattern roof covering complete all as specified and directed.

Supply & fixing Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete as specified and directed

Supply & fixing Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete aa as specified and directed

Material & labour for earth filling under floor including supply of suitable earth soft / hard dense for filling from outside including spreading and levelling watering and well ramming in layers n.exc 25cm complete in hard /dense soil complete all as specified.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour for machine cut Kota stone slab flooring, treads of step, 18-20 mm thick laid over and including 15mm thick bedding layer in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of kota stone shall be rounded complete all as specified and directed.

Material & Labour for machine cut Kota stone slab 15-18 mm thick as in vertical surfaces such as risers of steps, skirting, dado etc laid over all including 10mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing complete all as specified and directed.

Material & Labour for machine cut makrana marble white stone as in strips inserted in kota stone flooring 12-15 mm thick laid over and including 15mm thick bedding layer in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing complete all as specified and directed.

Material & Labour coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over and including 15mm thick bedding layer in CM 1:6 complete all as specified and directed.

MMaterial & Labour coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm as in vertical surface such as skirting,dado and riser to steps etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material & Labour for Glazed ceramic coloured digital design tile of size 350x250x7mm thick fixed as in vertical surface etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material & Labour 75 to 80mm thick machine pressed precast concrete interlocking , rubber pressed glossy finish paver block as approved by GE,confirming to IS-15658-2006 M-40 grade over and including 40 mm thick sand cushion including filling the gap between the tile and raod edge with PCC 1:2:4 type B2 using 40mm gradede crushed stone aggregate complete all as directed.

Demolition of brick work or stone masonry precast PCC block walling built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

Material & Labour for brick work with sub class `B’ bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces fair and even without using extra cement complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finishing the surfaces fair and even without using extra cement complete all as specified and directed.

Material & Labour preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Material & Labour for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. .

Material & labour for preparing new plastered or unplastered surfaces of walls, applying a layer of wall care putty 3mm thick (averaging) on wall surfaces including cornics etc for proper levelling of plaster and applying two coat of oil bound distemper over a coat of primer of chalk whitening complete all as pecified and directed.

Material & labour for complete removal of existing treatment of walls, applying a layer of wall care putty 3mm thick (averaging) on wall surfaces including cornics etc for proper levelling of plaster and applying two coat of oil bound distemper over a coat of primer of chalk whitening complete all as pecified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engr-in-Charge complete all as specified.

Material & Labour for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels including necessary form work complete all as specified and directed.

Material & Labour for 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone agg) as in road path, hard standing etc laid in panels with and including necessary forwork as required, filling the joint with hot bitumen 85/25 grade mixed with three parts of sand ( by weight) and finishing the surfaces of concret by using extra cement by making impression, whilst the concrete is green complete all as specified and directed.

Material & Labour for PCC 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sub base / sunken portion ete complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply & Fixing 20mm thick 2nd class soft wood (Chir) boarding planned one side fixed with butt joints with nails in any situation/ position except flooring and skirting complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Taking down chowkats or frames with shutter n.exc 1.5 Sqm each with shutters (without taking off shutters from the frame) and removed by the contractor complete all as specified and directed.

Taking down wooden shutter only area exc. 1.00 sqm but n exc 2.00 sqm and removed by the contractor complete all as specified and directed.

Taking down wooden shutter only area n exc. 1.00 sqm and removed by the contractor complete all as specified and directed.

Supply & Fixing 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

Supply & Fixing 35mm thick (batten thickness) IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veeneers complete all as specified and directed.

Supply & Fixing 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, with out sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

Supply & Fixing 30mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, with sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc.size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (b) complete all as specified and directed.

Supply & Fixing 125 mm size aluminium handle plate type anodised complete all as specified and directed.

Supply & Fixing 100 mm size aluminium handle plate type anodised complete all as specified and directed.

Supply & Fixing 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 75mm size MS butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

Supply & Fixing 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & Fixing 100mm long Aluminium tower anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

Supply & Fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply & Fixing in repairs of galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply & Fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Dismantling of timber fillet, rails,posts, rafters, purlins etc unframed work under 40 Sqcm in section complete all as specified and directed.

Material & Labour for 2nd class soft wood (Chir) plain fillets, square, rectangular or triangular in section, clean sawn secured with nails cross sectional area exc 6 Sqcm but not exc 13 Sqcm complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & Labour for preparation of old painted wooden surfaces of any description,not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in hold fast, bed block, etc, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified.

Supply & Fixing mild steel work as hold fasts, bands, straps, supports or stays for pipes eaves gutter including bolts if required, hooks (stay), clamps and similar small articles, conforming toFe 310-0 or Fe 410-0 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engr-in-Charge complete all as specified.

Material & labour mild steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Material & Labour for reinforced cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate)., as in Slab supported on walls,beams ,roof, landing, balconies,complete all as specified.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slab, landings and similar work not exceeding 200mm thick for rough finished surfaces of concrete flat.complete all as specified.

Supply & Fixing in repair aluminium anodised towel rail 20mm dia fixed with clamp/ finale, stop and min 8 to 10 no PVC wooden finish rings etc to wall complete as specified and directed.

Supply & Fixing in repair aluminium anodised brackets of towel rail complete all as specified and directed.

Taking down cement plaster / taking out old tarfit/ old unserviceable roof treatment of any description from RCC roof by scrapping, brooming and washing with water etc and removing rubbish to a dostance not exc 250 m complete all as specified and directed.

Material & Labour 15mm thick cement plaster in CM (1:3) using WPC @ 3% by weight of cement as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) on concrete surface of roof / parapet, apply and including a coat of bituminous primer confirming to IS:3384-1965 @ 0.30 kg /sqm, apply and including a tack coat of industrial bitumen 85/25 @ 1.20 kg/ sqm, and material & labour for APP based polymeric membrane minimum weight not less than 3.6Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid by forced application with over lap of minimum 100 mm and the overlap sealed/fused by by thermo-fused torch flame application method as per manufacturer's instructions and finally it will be finished with coat of aluminium paint @ 0.20 litre / sqm as per manufacturer instruction complete all as specified .

Material and labour PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs, sloping padding and finishing the surface even and smooth (without using extra cement) complete all as specified.

Material and labour for providing cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate for making good of broken part of chajjas,roof projection etc or recasting after dismantling broken portion including providing benching over chajjas from junction of wall & chajjas to end of projection and making good to match with existing surface of wall including necessary form work in diffrent quarters of cantt area, all as specified and directed. Note : (The work shall be carried out at Ist floor/2nd floor. The contractor shall make necessary arrangement of scafolding and ensure safety of labours.

E/M works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

Supply & Fixing point wiring for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed ( Note ;- wiring shall be done in colour coding as directed by Engineer in charge )

All as per item No 65 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No 65 above One socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 65 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fixing High quality LED T8 indoor PVC extruded batten tube light 1x 20 Watt 4 feet long including LED tube rod with in build driver , internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply & Fixing MCB single pole, 240 volts, 6 to 25 Amp, rupturing capacity 10 KA, ‘B’ curve type including taking down old MCB complete all as specified and directed.

Supply & Fixing MCB single pole & neutral , 240 volts, 32 Amp, rupturing capacity 10 KA, ‘B’ curve type including taking down old MCB complete all as specified and directed.

Supply & Fixing 4way TPN DB with isolator TPN, 415 volts, AC B curve, 10 KA, 63 amp including taking down existing main swiches, MCB,DB complete all as specified and directed .

Supply & Fixing sheet metal enclosure for DBs (double door type) Single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/ flush to the wall including taking down existing DB complete all as specified and directed .

Supply & Fixing bell push paino flush type single pole, one way 5 amp complete all as specified and directed.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed.

Supply, laying, jointing and commissioning LT XLPE 1100 volts grade heavy duty cable PVC insulated, stranded aluminium conductor served with inner sheathing of PVC tape, armoured with GI steel or tape and over all PVC sheathing cross sectional area 25sqmm 3½ core laid in trenches, floor through pipes,in duct, on pole and roads etc including taking down old cables, making good as per existing complete all as specified and directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for the same. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items

Supply and fix LED Bulb 12 Watt complete all as specified and directed.

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate), GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed Note: - On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.

Supply and fixing in repair Sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 4 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduit pipe 25mm dia with all accessories and one continuous run of 4.0 Sqmm copper conductor PVC including cutting chases in brick/ stone masonary wall for fixing conduit , platering, finished to match with the existing surfaces including taking down of existing wiring complete all as specified and as directed. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Excavation in trenches in soft /loose soil not exc 1.5 m wide and not exc 1.5mtr depth for laying cables, pipe etc and getting out including trimming sides and forming bottom surface to the required level/slope etc. complete all as specified and directed

Returning, filling in, including spreading ,levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

Supply and laying un reinforced precast cable cover class LV, type I flat size 250mmx150mmx40mm complete all as specified and directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement)

Supply and fixing / laying of galvanized iron pipe of 32mm nominal bore light grade for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc with clamps nuts, bolts and washers complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be included in the item rate.

Supply and fixing Steel water tubing medium grade galvanised with all GI fittings (such as bend,elbows,tees, connections, short pieces, back nuts, unions, caps & plugs etc) laid in trenches or on open surfaces bore of pipe 20mm including taking down existing pipe complete all as specified and directed.

Supply and fixing in repairs 15 mm bore chromium plated stop vlave cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

R N Kharwar and Sons

S S CONSTRUCTION CO

MANISH SINGH KUWARBI

NK CONSTRUCTION

M/S NAYAL ELECTRICALS