SITC of Pumping Machinery under Kalavad Group RWSS

Complete at Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Work: (1) Nikava Hw, (2) Panchdevda Hw, (3) Sanala Sub Hw, (4) Danidhar Hw, (5) Bavakhakhariya Hw & (6) Sursangda Hw

Amount of Total Amount

Amount of Total Amount

Name of Group / Type of Power

Sr. No. Name of Head Work Disch. X Head - No. of Sets Mechanical Section-A and

RWSS Pump Distribution

Section - A Section B Rs.

HSCF 83.33 LPS X 30 Mtr. Head X 37 KW- 2 Set &

Pump 55.56 LPS X 100 Mtr. Head X 90 KW- 2 Set

HSCF 55.56 LPS X 40 Mtr. Head X 37 KW- 2 Set &

Panchdevda Hw 20,87,504.60 9,21,887.00

Pump 253 LPS X 15 Mtr. Head X 55 KW- 2 Set

2900 LPM X 8 Mtr. Head x 12.5 HP- 2 Set

Sanala Sub Hw SM Pump 8,01,483.50 3,18,578.31

KALAVAD 440 LPM X 52 Mtr. Head x 15 HP- 2 Set

GROUP RWSS 344 LPM X 50 Mtr. Head x 10 HP- 2 Set &

Danidhar Hw SM Pump 4,76,215.40 1,22,946.60

263 LPM X 30 Mtr. Head x 5 HP- 2 Set

Bavakhakhariya Hw SM Pump 440 LPM X 52 Mtr. Head x 15 HP- 2 Set 1,41,566.40 71,122.00

Sursangda Hw 440 LPM X 30 Mtr. Head x 10 HP- 2 Set 1,26,993.60 48,464.00

Total Amount Rs. 86,41,413.00 31,57,484.71

Total Amount Rs. 86,41,413.00 31,57,484.71

Recommonded for Approval

Dy. Executive Engineer

Executive Engineer P. H. Mechanical Sub Division

P.H.Mechanical Division Jamnagar Jamnagar

ESTIMATE ANNEXURE (B-1)

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at Various

Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Nikava Hw

Duty Point :- (1) Nikava CWS to ESR:- 83.33 LPS(300 m3/Hr) X 30 Mtr. Head X 37 KW ( 2 Set) &

(2) Nikava CWS to Danidhar HGLR:- 55.56 LPS(200 m3/Hr) X 100 Mtr. Head X 90 KW ( 2 Set)

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

(A) MECHANICAL EQUIPMENTS SECTION

Dismantalling of existing 2 No. 75 KW HSCF Pump Set(Nikava to ESR) & 2 No. 110 KW HSCF Pump Set(Nikava to Danidhar

1 1.1 HGLR) at site with its cable, MS Pipe(Suction, Delivery, Common Header Pipe) with Butterfly, DPCV Valve, expansion Bellow etc. 1 Job 0.00 46610.00

complete as per instructions of engineer-in-charge.

Dismantalling of Common Suction Pipe at site with hiring of JCB, Hydro, Labor etc. complete as per instructions of engineer-in-

Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty

parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage

induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated

speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS.

2 2.1 M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal 2 Set 303622.00 12500.00

(Above 30 kW), Base Frame: MS

(i) For Nikava CWS to ESR:- 83.33 LPS(300 m3/Hr) X 30 Mtr. Head X 37 KW

(ii) For Nikava CWS to Danidhar HGLR:- 55.56 LPS(200 m3/Hr) X 100 Mtr. Head X 90 KW - VFD Suppported Inverter Duty

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to 400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe

having beveled ends plate or coil conforming to IS-3589-2001 or its latest revision/ ammendment for following thickness outside

diameter at GWSSB store or site anywhere in Gujarat State including all taxes, insurance, transportation, freight charges, octroi,

3 3.1 inspection charges, loading, unloading conveyance to Departmental stores, stacking etc. all complete. 18 Mtr 1684.00 168.40

(i) Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Delivery Pipe for ESR Section & Suction and Delivery Pipe for Danidhar

(ii) Pipe dia in OD- 273 mm, Thickness- 5.0 mm (Suction Pipe for ESR Section & Common Header Pipe for Danidhar HGLR

3.3 (iii) Pipe dia in OD- 323.9 mm, Thickness- 4.5 mm (Common Header Pipe for ESR Section) 12 Mtr 2505.00 250.50

3.4 (iv) Pipe dia in OD- 508 mm, Thickness- 5.0 mm (Common Suction Pipe for ESR & Danidhar HGLR Section) 20 Mtr 4383.00 438.30

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

Lowering, laying, jointing and welding in position M.S. Pipe to correct line and level on prepared formation, pedestal, supports or

chairs, including conveyance from store to site of work, loading, unloading, alignment, welding, necessary fittings during erection,

3.1.1 hydrostatic testing and commissioning, complete as directed by the Engineer-in-Charge. 18 RMT 0.00 216.00

(i) Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Delivery Pipe for ESR Section & Suction and Delivery Pipe for Danidhar

(ii) Pipe dia in OD- 273 mm, Thickness- 5.0 mm (Suction Pipe for ESR Section & Common Header Pipe for Danidhar HGLR

3.3.1 (iii) Pipe dia in OD- 323.9 mm, Thickness- 4.5 mm (Common Header Pipe for ESR Section) 12 RMT 0.00 297.00

3.4.1 (iv) Pipe dia in OD- 508 mm, Thickness- 5.0 mm (Common Suction Pipe for ESR & Danidhar HGLR Section) 20 RMT 0.00 427.00

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its latest

4 4 revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete. 30 Mtr 864.00 86.40

100 mm Dia Medium Duty (Bypass Pipe for ESR & Danidhar HGLR Section)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer, Flanges,

5 5 Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS Standard. 600 Kgs. 96.00 9.60

For 219.1 mm OD, 273 mm OD, 323.9 mm OD, 508 mm OD & 100 mm dia Pipe i.e. as per requirement

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Butterfly Valve as per IS

13095 (Latest Edition) with sleeve of EPDM & disc, shaft & internal partsof SS-410, of Board Approved make to be installed on

Suction MS Pipings including cost of all labour, jointing material, including nut bolts as per specification & requirement including all

6 6.1 taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental 1 No. 16804.00 1141.00

stores/site, stacking etc. complete.

(i) 300 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Nikava CWS to ESR

6.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- For Nikava CWS to ESR 2 No. 5866.00 742.00

6.3 (iii) 250 mm Dia (PN 1.6 Rating) for Common Header Pipe- For Nikava CWS to Danidhar HGLR 1 No. 8920.00 946.00

6.4 (iv) 200 mm Dia (PN 1.6 Rating) for Delivery Pipe- For Nikava CWS to Danidhar HGLR 2 No. 6116.00 742.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged Swing Plate Type Dual Plate

Check Valve of Approved make to be installed on DELIVERY MS Pipings including cost of all labour, jointing material,including nut

7 7.1 bolts as per specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection charges, 1 No. 35045.00 1141.00

loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

(i) 300 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Nikava CWS to ESR

7.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- For Nikava CWS to ESR 2 No. 15929.00 742.00

7.3 (iii) 250 mm Dia (PN 1.6 Rating) for Common Header Pipe- For Nikava CWS to Danidhar HGLR 1 No. 27830.00 946.00

7.4 (iv) 200 mm Dia (PN 1.6 Rating) for Delivery Pipe- For Nikava CWS to Danidhar HGLR 2 No. 16571.00 742.00

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall length of minimum

300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of following MOC & pressure ratings.

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS

1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

(i) 300 mm Dia (PN 1.0 Rating) for Common Header Pipe & Flowmeter- For Nikava CWS to ESR

(ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- For Nikava CWS to ESR

(iii) 250 mm Dia (PN 1.0 Rating) for Suction Pipe- For Nikava CWS to ESR

(iv) 250 mm Dia (PN 1.6 Rating) for Common Header Pipe & flowmeter- For Nikava CWS to Danidhar HGLR

(v) 200 mm Dia (PN 1.6 Rating) for Delivery & Suction Pipe- For Nikava CWS to Danidhar HGLR

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of Both End Flanged ISI Mark C.I. Non Rising Spindle Type

Sluice Valve with hand wheel operated PD type short body of board approved make to be installed on By-pass piping including

cost of all labour, jointing material,including nut bolts as per specification & requirement including all taxes, insurance, transportation,

9 9.1 freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete. 2 No. 15920.00 946.00

(i) 250 mm Dia (PN 1.0 Rating) for Suction Pipe- For Nikava CWS to ESR

(ii) 200 mm Dia (PN 1.6 Rating) for Suction Pipe- For Nikava CWS to Danidhar HGLR

(iii) 100 mm Dia (PN 1.6 Rating) for By Pass Pipe- For Nikava CWS to ESR & Danidhar HGLR

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube, SS 316 Movement material,

10 10.1 Aluminium dial with black graduation on white background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter 3 Nos. 950.00 79.00

proof glass, SS tag plate etc as per IS

(a) 100 mm Dial Size- 0 to 6 or 0 to 4 Kg/cm2- For Nikava CWS to ESR

10.2 (b) 150 mm Dial Size- 0 to 20 Kg/cm2- For Nikava CWS to Danidhar HGLR 3 Nos. 1303.00 109.00

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel, Black Trap Kapchi as

Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Consolidating as per Directive in 1:2:4 Ratio comp. Cu.

as per site requriement Mtr.

Supply, installation, testing & commissioning single girder type fully electrically operated EOT crane with electrically operated hoist,

class II duty, geared travelling trolley with seven meter lift complete with long travel rail track (40 mm sq. bar), moving or cross girder,

all three motions electrically operated by suitable rating motor IP 54, control panel & down pendant control block, brake, safety device,

cables form motor to starter panel & other required accessories & tested as per IS Specifications.

Capacity:- 3 Tonne, Lift 6-10 Mtr, SPAN 0-6 Mtr & Long Travel- 12 m

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

Additional Long Travel of Single Girder EOT Crane (More than 12 m) for 0m-6m Span

12.2 For Single Girder 3 Tonne EOT Crane 8 Mtr 3000.00 0.00

SITC of fabricated Mild Steel (MS) structural works comprising:

(i) Fabrication and erection of suitable MS supporting structure using ISMB/I-Beam, ISMC Channel, MS Angle, MS Plate and other

required structural sections for installation of minimum 3.0 Ton EOT Crane for safe lifting, lowering, installation and maintenance of

Pump, complete.

(ii) Providing, fabricating and erecting MS staircases, hand railings, walkways, platforms and support frames using suitable IS

standard structural sections, including cutting, welding, transportation, erection, primer, two coats of synthetic enamel paint and all

incidental works, complete as directed by the Engineer-in-Charge.

Supplying & fixing Steel Chequered Plate having 7 mm thickness, duly painted with two coats of black Japan colour. (Average Wt. Sq.

Supply, installation, testing & commissioning of horizontal mono submersible pump set (Drain pump) as per IS: 14220 / 1994 & its

latest amendments of following duty parameters with suitable submersible motor as per IS: 9283 / 1994 & its latest amendments

15 15 working on 3 phase, 415 V ± 10%, 50 ± 3% Hz power supply, rated speed 2900 RPM of following duty capacity. Material of 1 No. 15840.00 0.00

Constructions: Impeller: High tensile brass / LTB II; Casing: CI FG 260; Pump & Motor shaft: SS 304; Bearing Bush: LTB. Capacity:-

20 m3/hr x 10 mtr Head

Supply, testing & commissioning portable Diesel/Petrol driven self priming horizontal mono dewatering pump set with four wheel

trolley, GI medium duty delivery pipes, specials, suction strainer etc. complete set Material of Constructions: Impeller: Bronze, Casing:

CI, Shaft: Carbon Steel.

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated, Regular

Power Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser with all accessories viz. surge arrestor,

associated cables, cabinets, hardwares, etc complete as per following specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow

Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/

Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, CS

17 17.1 (ii) Flow Transmitter/ Converter ( Remote Field Mounted): 1 No. 127851.00 6571.00

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5%

accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP 67 protection, Die

cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass window enclosure, Inbuilt EEPROM and Data

Logger, 20 meters cable length for sensor to transmitter communication etc alongwith wall mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular Power Operated) 300 mm Dia (PN 1.0 Rating)- For Nikava CWS to ESR

(b) Full Bore electromagnetic Flow Meter (Regular Power Operated) 250 mm Dia (PN 1.6 Rating)- For Nikava CWS to

17.2 Danidhar HGLR 1 No. 128921.10 0.00

Total of Section-(A) Rs.

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

(B) POWER DISTRIBUTION SECTION

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA. and above

at 415 V. having normal current rating 400A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

18 18 internal connections & complete erected in existing 16 G.M.S. housing. 1 No. 27281.00 196.00

ICU=100% of ICS only of Cat-III

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-

1) & IEC:60502 (Part-1) of following sizes:

1 X 3.5 X 300 Sq.mm. - from Transformer to MCCB to PCC/LVDB Panels.

3.5 C x 150 Sq. mm Single Times Laying (From LVDB Panel to MCC Panel of Nikava CWS to Danidhar HGLR & APFC Panel)

19.3 3.5 C x 70 Sq. mm Single Times Laying (From LVDB Panel to MCC Panel of Nikava CWS to ESR ) 15 Mtr. 416.00 34.00

LV POWER CONTROL CENTER (LVDB Panel)

Supply at Site, Installation, Testing & Commissioning of LV Distribution Board (LVDB) totally enclosed, dust & vermin proof, indoor type, fabricated

from CRCA sheet steel with minimum thickness of 3 mm for base frame/ channel/ gland plates, 2.0 mm for load bearing members/ doors & 1.6 mm

for internal partitions, minimum degree of protection - IP 52 as per IS: 2147, suitable for operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral

effectively grounded, with instrumentation compartments accomodating meters, aux / protective relays, LED type indicating lamps & control MCBs as

per IS: 13947, resin cast current & voltage transformers as per IS: 2705, air insulated electrolitic grade Aluminum/ Copper busbar for three phase &

neutral system, GI earth bus for entire length, power/ control wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS:

694 & 8130, equipment fittings, horizontally running busbar compartment height of minimum 300 mm, incoming & ougoing cable connections for

1100V grade, Aluminium/ Copper conductor XLPE/ PVC insulated & PVC sheathed armoured cable.

LV PCC Panel (LVDB) shall have required incomming/outgoing modules of following type & ratings.

(a) 1 Nos. Incomers with approved Make 400 Amp, 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free mechanism, current

limiting type with Thermal Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential

free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as Incommer(s), shall have

20 20 enclosure dimensions- 1800(H) x 600(W) x 600 (D) & following technical features: 4 Pole, MCCB with Breaking Capacity of Icu=36 KA at 415V 1 No 162541.00 0.00

(Ics=100% of Icu), TM release with all necessary electro-mechanical protections, interlocks etc.

(b) 02 Outgoing Feeder of 250 Amp MCCB(for Nikava CWS to Danidhar HGLR & APFC Panel ), 01 Outgoing Feeder of 160 Amp MCCB(for

Nikava CWS to ESR ) 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free mechanism, current limiting type with Thermal

Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with

all necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as outgong(s), shall have enclosure dimensions- 400(H) x

600(W) x 600 (D) & following technical features: 4 Pole, MCCB with Breaking Capacity of Icu=36 KA at 415V (Ics=100% of Icu), TM release with all

necessary electro-mechanical protections, interlocks etc.

(c) 3 Nos. Outgoings each with 63A TPN MCB for outdoor lighting (C Curve) having 10kA breaking capacity & confirming to IS

(d) No Load Compansation 20 KVAR banks (APP type) with detuned filters, MCCB, Power Contractor , Auto / manual control with switching on

delay timer, housed in lower most compartment of incomer/ buscoupler module(s). KVAR bank, selected based on kva rating of associated

transformer(s), shall be of following capacity.

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

SITC of Floor Mounted Indoor Type, Totally Enclosed, Dust & Vermin Proof, IP-52 (minimum) LV Variable Frequency Drive

(VFD) Panel suitable for operation and speed control of 90 kW, 415V ±10%, 3 Phase, 4 Wire, 50 Hz squirrel cage induction motor

coupled with HSCF Pump Set, complete with CRCA sheet steel enclosure fabricated from minimum 3 mm thick base frame/gland

plate, 2 mm thick load bearing members & doors and 1.6 mm thick internal partitions, powder coated after seven tank pretreatment

process, air insulated electrolytic grade aluminium bus bars, incoming TPN MCCB of adequate rating and breaking capacity, input

contactor, heavy duty IGBT based microprocessor controlled VFD suitable for variable torque pump application with V/f & Sensorless

Vector Control, inbuilt PID controller, Auto/Manual operation, Local/Remote operation, Auto Restart, Flying Start, Sleep/Wake

function, 3% Input Line Reactor, Output dv/dt Filter, Type-II Surge Protection Device (SPD), Control Transformer, Digital Multifunction

Meter with required CTs, LED indicating lamps, selector switches, push buttons, control MCBs, cooling fans with filter, space heater

with thermostat, copper control wiring with FRLS copper wires, power & control terminal blocks with minimum 10% spare terminals,

21 21.1 cable alley, gland plates, earthing bus bar, suitable for aluminium/copper XLPE/PVC armoured cables, complete with all internal 1 Nos. 745000.00 0.00

wiring, ferruling, danger notice plate, name plate, hardware, foundation hardware, transportation, loading, unloading, erection, testing

& commissioning complete in all respects as per latest IS/IEC 61800, IS/IEC 61439, IS/IEC 60947, IS:694, IS:8130 and other

applicable standards. The VFD shall provide minimum protections for Over Voltage, Under Voltage, Over Current, Over Load, Short

Circuit, Earth Fault, Phase Loss, Phase Imbalance, Motor Over Temperature, Stall, Dry Run (through external input), Under Load and

Communication Fault with RS-485 Modbus communication port complete as directed by Engineer-in-Charge.

VFD Panel for 90 kW Pump (1 Working + 1 Standby): The VFD rating shall be one step higher than the motor rating, i.e.,

kW, for Nikava CWS to Danidhar HGLR

SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum degree of protection - IP 52 as per IS:

operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments accomodating LED type

indicating lamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air

insulated electrolitic grade Aluminum bus bar for three phase & neutral system with incomming breaker- microprocessor based Air

Circuit Breakers (electrically operated drawout type)/ air break fixed type MCCB with trip free mechanism, current limiting type as per

IS: 8828, Motor Contractor (as per type -2 coordination), Overload Relay with built-in single phasing prevention feature & auxiliary

feeders as per SLD drawings, momentary contact type push buttons, equipment fittings, bus bars, cable boxes, cable gland, incoming

& ougoing cable connection for 1100V grade, Aluminium/ Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable,

10% spare terminals, power wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable

21.2 compartments / alleys of minimum 300 mm size, GI / Al earth bus bar for entire length. MCC shall be fabricated from cold rolled, coled 1 Nos. 137796.00 0.00

annealed (CRCA) sheet steel & minimum thickness of various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal Partitions: 1.6 mm

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP, Timer

MCC Panel of 37 KW (1 Working + 1 Standby) + Extra 1 feeder of 125 Amp + Extra 1 feeder of 63 Amp- For Nikava CWS to

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

APFCR Panel: 60 KVAR

Suplly,Installation,testing & commissionin LV APFC panel consisting of required capcitor banks for continious duty to improve P.F.

0.85 to 0.99 in rquired steps enclosed in dust & vermin proof compartment, indoortye, fabricated from CRCAsheet steel with minimu

thickness of 3 mm for base frame / channel / gland plate, 2.0 mm for load bearing members / doors & 1.6 mm for internal partitions,

minimum degree of protection - IP 42, busbar chamber, required size of Al bus bar/terminals, 10 stage APFC relay, metering,

indicating lamps, push button, with detuned reactor complete as per IS:16636-2017 with latest ammendment & detailed technical

specification and data sheet as under.

60 KVAR APFC panel consisting following items.

a) 250 A, 50 kA for 1sec TP, TM based MCCB with spreader terminal & rotary handle

22 22 b) 0-250 A range analouge ammeter of 96 x 96 mm size with selector switch 1 Set 180116.00 7954.00

c) 3 nos. 250/5A, 10 VA CL-1.0 cast resin type current transformer d) Suitable raiting of MCCB/MCB & Contractors for each capacitor

e) Suitable rating APP type capacitor banks (vacuum impregnated with non-PCB / non toxic oil, internally delta connected with built in

internal fuses complete with discharge resistances & terminal cover) of approved make in required steps with well suited detuned

reactor is placed in series with each capacitor step. (e.g., 60 KVAR capacity will be provided in steps of 2 nos x 5KVAR, 2 nos x

10 KVAR & 2 nos x 15 KVAR)

f) Enclosure dimensions-1600 (H) x 1150 (W) x 600 (D)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-

1) & IEC:60502 (Part-1) of following sizes:

3.0 C x 120 Sq. mm Single Times Laying (From MCC Panel to Motor Feeders of Nikava CWS to Danidhar HGLR)

3.0 C x 50 Sq. mm Single Times Laying (From MCC Panel to Motor Feeders of Nikava CWS to ESR)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM

24 24 Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- 4 Job 4215.00 331.00

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting required size hot dip Galvinized Strip of size 50 mm width X 12 mm thickness for earthing of

25 25 HT/OCB/ACB/Transformer/LT Panel Board/Motors etc. using copper clamp for the purpose of connecting panel body earth to earth 150 Kg 60.00 17.00

pit etc complete as per site requirement.

Supply & laying GI ladder type cable trays with side channels of size - 75 x 15 x 15 mm / 100 x 15 x 15 mm & rungs of size - 35 x15

x 15 mm spaced at 250 mm apart, fabricated from 2 mm thick sheet steel in standard length of 2.5 meter, duly hot dipped galvanized

after fabrication as per IS 2629-1989/ IS 4759-1984 including accessories such as coupler plates/ fish plates, bends, tees, reducers,

26 26 elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification and instruction of Engineer-in- 50 Mtr. 305.00 31.00

150(W)X75(H)X2 mm thick

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for

27 27 earth continuity of following size (A) With medium class Rigid PVC pipe and accessories with medium class Rigid PVC pipe and 80 Mtr 131.00 8.00

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

LIGHTING DISTRIBUTION BOARD:

Providing & Erecting following type of Modular type accessories mounted with PVC/ metallic box, single mounting base frame covered

with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In charge. 6 no. 16A single

28 28 Pole Modular MCB Switch, Cat. II (1 point of pump room inside lights, 4 point of pump room outside lights, 1 point of celling fan) & 1 1 No 3645.00 0.00

No. incomer 40 Amp. DP ELCB/RCCB for lighting & inductive load (C Curve) having 10kA breaking capacity & confirming to IS

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must have 440 VAC line

29 29 supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings, connectors, accessories etc complete. 6 Nos. 4000.00 145.00

70 Watt (Cat-II)

Supplying and erecting R&B approved make of LED Suraface mounted luminaire with rear reflector suitable for office and laboratory

30 30 applications with 22-24 Watt LED (Cat.II) Lamp with all required fittings, connectors, accessories complete. 6 Each 611.00 34.00

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s 1200mm sweep

31 31 complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing with 2 Nos. 1530.00 51.00

regulator, modular switch box.(Make shall be approved by Engineer incharge)

Supply 4.00 mm thick Rubber Mat of required length and breath.- 1 * 10 Sq.Mtr

Total of Section-(B) Rs.

Total of Section ( A+B ) Rs.

Executive Engineer Dy. Executive Engineer

P.H.Mechanical Division Jamnagar P.H.Mech. Sub Division

ESTIMATE ANNEXURE (B-2)

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at Various

Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Panchdevda Hw

Duty Point :- (1) Panchdevda CWS to ESR:- 55.56 LPS(200 m3/Hr) X 40 Mtr. Head X 37 KW ( 2 Set) &

(2) Panchdevda RWS to FP:- 253 LPS X 15 Mtr. Head X 55 KW ( 2 Set)

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

(A) MECHANICAL EQUIPMENTS SECTION

Dismantalling of existing 2 No. 30 KW HSCF Pump Set(Panchdevada to ESR Section) at site with its cable, MS Pipe(Suction,

Delivery, Common Header Pipe) with Butterfly, DPCV Valve, expansion Bellow etc. complete as per instructions of engineer-in-

Dismantalling of existing 1 No. 55 KW HSCF Pump Set(Panchdevada to Filter Plant Section) at site with its cable, etc. complete

1.2 as per instructions of engineer-in-charge. 1 Job 0.00 6250.00

Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty

parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage

induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated

speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS.

2 2.1 M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal 2 Set 303622.00 12500.00

(Above 30 kW), Base Frame: MS

(i) Panchdevda CWS to ESR:- 55.56 LPS(200 m3/Hr) X 40 Mtr. Head X 37 KW

(ii) Panchdevda RWS to FP:- 253 LPS X 15 Mtr. Head X 55 KW- For SITC Work

(ii) Panchdevda RWS to FP:- 253 LPS X 15 Mtr. Head X 55 KW- For Supply Only

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to 400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe

having beveled ends plate or coil conforming to IS-3589-2001 or its latest revision/ ammendment for following thickness outside

diameter at GWSSB store or site anywhere in Gujarat State including all taxes, insurance, transportation, freight charges, octroi,

3 3.1 inspection charges, loading, unloading conveyance to Departmental stores, stacking etc. all complete. 18 Mtr 1684.00 0.00

(i) Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Delivery and Suction Pipe for Panchdevda CWS to ESR Section)

(ii) Pipe dia in OD- 273 mm, Thickness- 5.0 mm (Common Header Pipe for Panchdevda CWS to ESR Section)

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

Lowering, laying, jointing and welding in position M.S. Pipe to correct line and level on prepared formation, pedestal, supports or

chairs, including conveyance from store to site of work, loading, unloading, alignment, welding, necessary fittings during erection,

3.1.1 hydrostatic testing and commissioning, complete as directed by the Engineer-in-Charge. 18 RMT 0.00 216.00

(i) Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Delivery and Suction Pipe for Panchdevda CWS to ESR Section)

(ii) Pipe dia in OD- 273 mm, Thickness- 5.0 mm (Common Header Pipe for Panchdevda CWS to ESR Section)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its latest

revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

80 mm Dia Medium Duty (Bypass Pipe for ESR & Danidhar HGLR Section)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer, Flanges,

Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS Standard.

For 219.1 mm OD, 273 mm OD & 80 mm dia Pipe & as per requirement

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Butterfly Valve as per IS

13095 (Latest Edition) with sleeve of EPDM & disc, shaft & internal partsof SS-410, of Board Approved make to be installed on

Suction MS Pipings including cost of all labour, jointing material, including nut bolts as per specification & requirement including all

6 6.1 taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental 1 No. 8563.00 946.00

stores/site, stacking etc. complete.

(i) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe- Panchdevda CWS to ESR

6.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- Panchdevda CWS to ESR 2 No. 5866.00 742.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged Swing Plate Type Dual Plate

Check Valve of Approved make to be installed on DELIVERY MS Pipings including cost of all labour, jointing material,including nut

7 7.1 bolts as per specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection charges, 1 No. 26759.00 946.00

loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

(i) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Panchdevda CWS to ESR

7.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- For Panchdevda CWS to ESR 2 No. 15929.00 742.00

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall length of minimum

300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of following MOC & pressure ratings.

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS

1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

(i) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe & Flowmeter- For Panchdevda CWS to ESR

(ii) 200 mm Dia (PN 1.0 Rating) for Suction & Delivery Pipe- For Panchdevda CWS to ESR

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of Both End Flanged ISI Mark C.I. Non Rising Spindle Type

Sluice Valve with hand wheel operated PD type short body of board approved make to be installed on By-pass piping including

cost of all labour, jointing material,including nut bolts as per specification & requirement including all taxes, insurance, transportation,

9 9.1 freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete. 2 No. 9813.00 742.00

(i) 200 mm Dia (PN 1.0 Rating) for Suction Pipe- For Panchdevda CWS to ESR

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

(ii) 80 mm Dia (PN 1.0 Rating) for By Pass Pipe- For Panchdevda CWS to ESR

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube, SS 316 Movement material,

Aluminium dial with black graduation on white background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter

proof glass, SS tag plate etc as per IS

(a) 100 mm Dial Size- 0 to 6 Kg/cm2- For Panchdevda CWS to ESR

Chain Pulley Block (Manually Operated) :

Providing and erecting chain pulley block with triple gear arrangement, lifting hook, load chain and hand chain and locking device with

spur gear travelling trolley and all accessories.- Capacity: 2 Tons

SITC of fabricated Mild Steel (MS) structural works comprising:

(i) Fabrication and erection of suitable MS supporting structure using ISMB/I-Beam, ISMC Channel, MS Angle, MS Plate and other

required structural sections for installation of minimum 2.0 TonChain Pulley Block for safe lifting, lowering, installation and

maintenance of Pump, complete.

(ii) Providing, fabricating and erecting MS staircases, hand railings, walkways, platforms and support frames using suitable IS

standard structural sections, including cutting, welding, transportation, erection, primer, two coats of synthetic enamel paint and all

incidental works, complete as directed by the Engineer-in-Charge.

Supplying & fixing Steel Chequered Plate having 7 mm thickness, duly painted with two coats of black Japan colour. (Average Wt.

Supply, installation, testing & commissioning of horizontal mono submersible pump set (Drain pump) as per IS: 14220 / 1994 & its

latest amendments of following duty parameters with suitable submersible motor as per IS: 9283 / 1994 & its latest amendments

working on 3 phase, 415 V ± 10%, 50 ± 3% Hz power supply, rated speed 2900 RPM of following duty capacity. Material of

Constructions: Impeller: High tensile brass / LTB II; Casing: CI FG 260; Pump & Motor shaft: SS 304; Bearing Bush: LTB. Capacity:-

20 m3/hr x 10 mtr Head

Supply, testing & commissioning portable Diesel/Petrol driven self priming horizontal mono dewatering pump set with four wheel

trolley, GI medium duty delivery pipes, specials, suction strainer etc. complete set Material of Constructions: Impeller: Bronze, Casing:

CI, Shaft: Carbon Steel.

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel, Black Trap Kapchi as

Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Consolidating as per Directive in 1:2:4 Ratio comp. Cu.

as per site requriement Mtr.

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated, Regular

Power Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser with all accessories viz. surge arrestor,

associated cables, cabinets, hardwares, etc complete as per following specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow

Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/

Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, CS

17 17 (ii) Flow Transmitter/ Converter ( Remote Field Mounted): 1 No. 111833.00 5368.00

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5%

accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP 67 protection, Die

cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass window enclosure, Inbuilt EEPROM and Data

Logger, 20 meters cable length for sensor to transmitter communication etc alongwith wall mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular Power Operated) 250 mm Dia (PN 1.0 Rating)- For Panchdevda CWS to

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

18 18 connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. 1 No. 8633.00 141.00

ICU=100% of ICS only of Cat-III (Panchdevada to ESR Section)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-

1) & IEC:60502 (Part-1) of following sizes:

1 X 3.5 X 70 Sq.mm. - from Transformer to MCCB to MCC Panel. (Panchdevada to ESR Section)

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum degree of protection - IP 52 as per IS:

operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments accomodating LED type

indicating lamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air

insulated electrolitic grade Aluminum bus bar for three phase & neutral system with incomming breaker- microprocessor based Air

Circuit Breakers (electrically operated drawout type)/ air break fixed type MCCB with trip free mechanism, current limiting type as per

IS: 8828, Motor Contractor (as per type -2 coordination), Overload Relay with built-in single phasing prevention feature & auxiliary

feeders as per SLD drawings, momentary contact type push buttons, equipment fittings, bus bars, cable boxes, cable gland, incoming

& ougoing cable connection for 1100V grade, Aluminium/ Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable,

10% spare terminals, power wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable

20 20 compartments / alleys of minimum 300 mm size, GI / Al earth bus bar for entire length. MCC shall be fabricated from cold rolled, coled 1 Nos. 137796.00 0.00

annealed (CRCA) sheet steel & minimum thickness of various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal Partitions: 1.6 mm

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP, Timer

MCC Panel of 37 KW (2 Working Feeder) + Extra 1 feeder of 125 Amp + Extra 2 feeder of 63 Amp- For Nikava CWS to ESR

11kV Ring Main Unit (RMU)

Supply, installation, testing & commissioning Outdoor type 11 KV, 630 Amps. 21 kA for 3 second SF6 type extensible and motorized

way smart Ring Main Unit (RMU) complete with (1 VCB + 2 LBS) with FRTU and FPI as per IS

Supply, laying, testing & commissioning 11 / 11 kV (UE) grade, XLPE insulated, stranded Aluminium conductor, galvanised steel

flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps

/ in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:

(Part-2) & IEC: 60502(Part-2), of following sizes:

3 Core 120 sq mm (For GEB to VCB Panel to Transformer)

Providing & fitting heat shrink cable termination / jointing kits for 11 kV (UE) / 11 kV (E) grade XLPE insulated cable including

necessary earth connectivity connection, material & consummables making the termination/ joint complete ensuring the joint

23 23.1 resistance is within the permissble limit as per IS, of following types & sizes: 2 No. 7289.00 636.00

Indoor Terminations Kit suitable for 3C x 120 sq mm HT Cable

Outdoor Terminations Kit suitable for 3C x 120 sq mm HT Cable

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-

1) & IEC:60502 (Part-1) of following sizes:

3.0 C x 50 Sq. mm Single Times Laying (From MCC Panel to Motor Feeders of Panchdevda CWS to ESR)

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting required size hot dip Galvinized Strip of size 50 mm width X 12 mm thickness for earthing of

26 26 HT/OCB/ACB/Transformer/LT Panel Board/Motors etc. using copper clamp for the purpose of connecting panel body earth to earth 100 Kg 60.00 17.00

pit etc complete as per site requirement.

Supply & laying GI ladder type cable trays with side channels of size - 75 x 15 x 15 mm / 100 x 15 x 15 mm & rungs of size - 35 x15

x 15 mm spaced at 250 mm apart, fabricated from 2 mm thick sheet steel in standard length of 2.5 meter, duly hot dipped galvanized

after fabrication as per IS 2629-1989/ IS 4759-1984 including accessories such as coupler plates/ fish plates, bends, tees, reducers,

27 27 elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification and instruction of Engineer-in- 50 Mtr. 305.00 31.00

150(W)X75(H)X2 mm thick

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (A) With medium class Rigid PVC pipe and accessories with medium class Rigid PVC pipe and

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Sr. Item Description of Item Qty Unit Rate (Rs.) Total Amount

Supply Rate Labour Rate

LIGHTING DISTRIBUTION BOARD:

Providing & Erecting following type of Modular type accessories mounted with PVC/ metallic box, single mounting base frame covered

with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In charge. 6 no. 16A single

29 29 Pole Modular MCB Switch, Cat. II (1 point of pump room inside lights, 4 point of pump room outside lights, 1 point of celling fan) & 1 1 No 3645.00 0.00

No. incomer 40 Amp. DP ELCB/RCCB for lighting & inductive load (C Curve) having 10kA breaking capacity & confirming to IS

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must have 440 VAC line

supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings, connectors, accessories etc complete.

70 Watt (Cat-II)

Supplying and erecting R&B approved make of LED Suraface mounted luminaire with rear reflector suitable for office and laboratory

31 31 applications with 22-24 Watt LED (Cat.II) Lamp with all required fittings, connectors, accessories complete. 6 Each 611.00 34.00

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s 1200mm sweep

complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing with

regulator, modular switch box.(Make shall be approved by Engineer incharge)

Supply 4.00 mm thick Rubber Mat of required length and breath.- 1 * 10 Sq.Mtr

Total of Section-(B) Rs.

Total of Section ( A+B ) Rs.

Executive Engineer Dy. Executive Engineer

P.H.Mechanical Division Jamnagar P.H.Mech. Sub Division

ESTIMATE ANNEXURE (B-3)

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Sanala Sub Hw

Duty Point :- (1) Sanala NC 20 Sump to Sanala Sub Hw:- 2900 LPM X 8 Mtr. Head x 12.5 HP- ( 2 Set) &

(2) Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad:- 440 LPM X 52 Mtr. Head x 15 HP- ( 2 Set)

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

(A) MECHANICAL EQUIPMENTS SECTION

Dismantalling of Existing 2 No. 7 KW SCF Pump Set(NC 20 Sump to Sanala Sub Hw Section) at site with its

cable, MS Pipe etc. complete as per instructions of engineer-in-charge.

Supply at site, Storage, Erection, Installation, Testing & Commissioning of Horizontal type Horizontal Monoset

Sub Pump (SM) set 2900/1450 RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ± 10%, following IS 14220 along

with suitable foundation / Installation device with 15 Mtr Power & Control cable of following material of

Construction:-Casing - C.I. FG 260, Impeller - Bronze & Shaft- SS 410 etc as per detailed specifications &

2 2.1 requirement comp. 2 Set 25200.00 2520.00

(i)Capacity:- SM 2.9:- 440 LPM(7.33 LPS) at 52 Mts. Head with minimum 15 HP motor ratings.- Sanala Sub

Hw to Prabhuji Pipaliya & Machhalivad

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

(ii)Capacity:- 2900 LPM(48.33 LPS) at 8 Mts. Head with minimum 12.5 HP motor ratings.- Sanala NC

Sump to Sanala Sub Hw

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

Installation, Testing & Commissioning of Existing 2 No. 21 LPS x 17 Mtr Head x 7 KW SCF Pump Set into

Sump for Sanala Sub Hw to ESR Section at site with its cable, etc. complete as per instructions of engineer-in-

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to 400mm)/Submerged Arc Welded(Above

400mm) M.S.Pipe having beveled ends plate or coil conforming to IS-3589-2001 or its latest revision/

ammendment for following thickness outside diameter at GWSSB store or site anywhere in Gujarat State including

all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to

Departmental stores, stacking etc. all complete.

(i) Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Common Header Pipe for Sanala NC 20 Sump to Sanala

(ii) Pipe dia in OD- 168.3 mm, Thickness- 4.5 mm (Common Header Pipe for Sanala Sub Hw to ESR Section

4.2 & Delivery Pipe for Sanala NC 20 Sump to Sanala Sub Hw) 24 Mtr 1285.00 0.00

Lowering, laying, jointing and welding in position M.S. Pipe to correct line and level on prepared formation,

pedestal, supports or chairs, including conveyance from store to site of work, loading, unloading, alignment,

welding, necessary fittings during erection, hydrostatic testing and commissioning, complete as directed by the

4.1.1 Engineer-in-Charge. 24 RMT 0.00 216.00

(i) Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Common Header Pipe for Sanala NC 20 Sump to Sanala

(ii) Pipe dia in OD- 168.3 mm, Thickness- 4.5 mm (Common Header Pipe for Sanala Sub Hw to ESR Section

4.2.1 & Delivery Pipe for Sanala NC 20 Sump to Sanala Sub Hw) 24 RMT 0.00 180.00

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its

latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

100 mm Dia Medium Duty- Common Header Pipe for Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

6 6 Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent 300 Kgs. 96.00 9.60

IS Standard as per site requirement.

Supplying, Installation, Testing & Commissioning in standard length ISI mark high density polyethylene H.D.P.E.

Pipes suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes,

7 7.1 transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to dept. stores etc. 80 Mtr 386.00 38.60

110 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe for Sanala Sub Hw to ESR Section

90 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe for Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Butterfly

Valve as per IS 13095 (Latest Edition) with sleeve of EPDM & disc, shaft & internal partsof SS-410, of Board

Approved make to be installed on Suction MS Pipings including cost of all labour, jointing material, including nut

bolts as per specification & requirement including all taxes, insurance, transportation, freight charges, octroi,

8 8.1 inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete. 3 No. 4089.00 585.00

(i) 150 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala Sub Hw to ESR Section & Delivery Pipe-

Sanala NC 20 Sump to Sanala Sub Hw

8.2 (ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala NC 20 Sump to Sanala Sub Hw 1 No. 5866.00 742.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged Swing

Plate Type Dual Plate Check Valve of Approved make to be installed on DELIVERY MS Pipings including cost

of all labour, jointing material,including nut bolts as per specification & requirement including all taxes, insurance,

9 9.1 transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental 3 No. 8027.00 585.00

stores/site, stacking etc. complete.

(i) 150 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala Sub Hw to ESR Section & Delivery Pipe-

Sanala NC 20 Sump to Sanala Sub Hw

9.2 (ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala NC 20 Sump to Sanala Sub Hw 1 No. 15929.00 742.00

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS

2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

(i) 150 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala Sub Hw to ESR Section & Delivery Pipe-

Sanala NC 20 Sump to Sanala Sub Hw

(ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala NC 20 Sump to Sanala Sub Hw

(ii) 100 mm Dia (PN 1.6 Rating) for Common Header Pipe- Sanala Sub Hw to Prabhuji Pipaliya &

10.3 Machhalivad 1 No. 3600.00 0.00

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Hand

Wheel/Cap Operated Sluice Valve as per IS: 14846 (Latest Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS/HDPE Pipings including cost of all labour, jointing material, including nut bolts

as per specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 125 mm Dia, PN 1.0 - Delivery Pipe for Sanala Sub Hw to ESR Section

Size: 100 mm Dia, PN 1.6 - Delivery & Common Header Pipe for Sanala Sub Hw to Prabhuji Pipaliya &

11.2 Machhalivad 3 No. 3598.00 439.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged C.I. Reflux/

Non return Valve with IS: 5312, of Approved make to be installed on DELIVERY/Common Header MS

Pipings including cost of all labour, jointing material,including nut bolts as per specification & requirement

12 12.1 including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, 2 Nos. 6750.00 479.00

unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 125 mm Dia, PN 1.0 - Delivery Pipe for Sanala Sub Hw to ESR Section

Size: 100 mm Dia, PN 1.6 - Delivery & Common Header Pipe for Sanala Sub Hw to Prabhuji Pipaliya &

12.2 Machhalivad 3 No. 5563.00 439.00

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom

1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon

Tube, SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS

(a) 100 mm Dial Size- 0 to 6 Kg/cm2- 3 No For Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad &

100 mm Dial Size- 0 to 4 Kg/cm2- 3 No For Sanala Sub Hw to ESR Section

13.2 (b) 100 mm Dial Size- 0 to 2.1 Kg/cm2- 3 No For Sanala NC 20 Sump to Sanala Sub Hw 3 Nos. 1055.00 88.00

Chain Pulley Block (Manually Operated) :

Providing and erecting chain pulley block with triple gear arrangement, lifting hook, load chain and hand chain and

locking device with spur gear travelling trolley and all accessories.- Capacity: 1 Tons

SITC of suitable size ISMB I Beam girder, MS Channel, MS Angle, etc. required for minimum 1 Ton capacity

loading / unloading / lifting / lowering for making a structure suitable for installation of chain pulley block so as to

removable of the pump set for opeation and maintainace purposes to directly to load the same into the truck /

pickup van, etc. complete.

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel,

Black Trap Kapchi as Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Cu.

Consolidating as per Directive in 1:2:4 Ratio comp. as per site requriement Mtr.

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory

calibrated, Regular Power Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser with all

accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc complete as per following

specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/

Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding

Electrode, Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with

Anticorrosive Paint Coil Housing with Junction Box, CS flanges.

(ii) Flow Transmitter/ Converter ( Remote Field Mounted):

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser

display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one

status output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with

glass window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter

communication etc alongwith wall mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular Power Operated) 100 mm Dia (PN 1.6 Rating)- Sanala

Sub Hw to Prabhuji Pipaliya & Machhalivad

(b) Full Bore electromagnetic Flow Meter (Regular Power Operated) 200 mm Dia (PN 1.0 Rating)- For

17.2 Sanala NC 20 Sump to Sanala Sub Hw 1 No. 101426.00 4623.00

Installation, Testing, Commissioning of Existing Full Bore Electromagnetic flow meter (Regular Power

18 18 Operated) 150 mm Dia (PN 1.0 Rating)- Sanala Sub Hw to ESR 1 No. 0.00 4367.00

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting

complete with operating mechanism suitable to operate on 415V A.C. With HRC fuses of suitable load confirming

19 19 to IS. 13947 (Part I & III). of following capacities 1 No. 5996.00 64.00

(a) 125 Amp Cat-III

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor,

galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on

wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing

20 20 or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes: 100 Mts. 314.00 24.00

1 X 3.5 X 50 Sq.mm. - For Receiving Power from NC 20 Sanala Hw

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

LV POWER CONTROL CENTER (LVDB Panel)

Supply at Site, Installation, Testing & Commissioning of LV Distribution Board (LVDB) totally enclosed, dust & vermin proof,

indoor type, fabricated from CRCA sheet steel with minimum thickness of 3 mm for base frame/ channel/ gland plates,

mm for load bearing members/ doors & 1.6 mm for internal partitions, minimum degree of protection - IP 52 as per IS:

suitable for operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments

accomodating meters, aux / protective relays, LED type indicating lamps & control MCBs as per IS: 13947, resin cast

current & voltage transformers as per IS: 2705, air insulated electrolitic grade Aluminum/ Copper busbar for three phase &

neutral system, GI earth bus for entire length, power/ control wiring using 1100V grade, FRLS insulated copper conductor

wires conforming to IS: 694 & 8130, equipment fittings, horizontally running busbar compartment height of minimum

mm, incoming & ougoing cable connections for 1100V grade, Aluminium/ Copper conductor XLPE/ PVC insulated & PVC

sheathed armoured cable.

LV PCC Panel (LVDB) shall have required incomming/outgoing modules of following type & ratings.

(a) 1 Nos. Incomers with approved Make 125 Amp, 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip

21 21 free mechanism, current limiting type with Thermal Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable 1 No 91618.00 0.00

settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections &

interlocks etc. MCCB module, when used as Incommer(s), shall have enclosure dimensions- 1800(H) x 600(W) x 600 (D) &

following technical features: 4 Pole, MCCB with Breaking Capacity of Icu=25 KA at 415V (Ics=100% of Icu), TM release with

all necessary electro-mechanical protections, interlocks etc.

(b) 03 Outgoing Feeder of 63 Amp MCCB(for All 3 Section) 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2

with trip free mechanism, current limiting type with Thermal Magnetic / Microprocessor release (O / C, S / C & E / F) with

adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical

protections & interlocks etc. MCCB module, when used as outgong(s), shall have enclosure dimensions- 300(H) x 500(W) x

600 (D) & following technical features: 4 Pole, MCCB with Breaking Capacity of Icu=25 KA at 415V (Ics=100% of Icu), TM

release with all necessary electro-mechanical protections, interlocks etc.

(c) 2 Nos. Outgoings each with 63A TPN MCB for outdoor lighting (C Curve) having 10kA breaking capacity & confirming to

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor,

galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on

wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing

22 22 or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes: 50 Mts. 194.00 24.00

1 X 3.5 X 25 Sq.mm. - From LVDB Panel to MCC Panel of all 3 Section

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

SITC of LV MCC panel totally enclosed dust and vermin proof, indoor type, minimum degree of protection- IP

as per IS 2147 operating on 3 ph. 4- wire 415v 50Hz neutral effectively grounded with instrument compartment

accomodating led type indicating lamps, control contactor as per IS 13947, CT of accuracy class -I as per IS

relays, meters & control MCBs, air insulated electrolitic grade aluminium bus bar for 3 phases and neutral system

with incoming braker-microprocessor based air circuit breakers(electrically operated drawout type)/air break fixed

type MCCB with trip free mechanism, current limit type as per IS 8828, motor contactor(as per type-2 co-

ordination), overload relay with built in single phasing prevention feature and auxiliary feeders as per SLD

drawings, momentary contact type push button, equipment fittings, bus bars, cable boxes, cable glands,

incoming/outgoing cable connections for 1100 volt grade al/cu conductor XLPE/PVC insulated & PVC sheathed

armoured cable,10% spare terminals, power wiring using1100 volts grade, FRLS insulated copper conductor wires

confirming to IS 694 & 8130, cable compartment/alleys of minimum 300 mm size, GI earth bus bar For entire

length. MCC shall be fabricated from cold rolled, cold annealed(CRCA) sheet steel and minimum thickness of

various members shall be as follows. Base frame/channel/gland plate-3mm, Load bearing member/doors-2mm

and internal partitions-1.6mm with fixed APP type capacitor bank to improve PF on each outer feeder with as

shown below size as per IS & as per tech. specifications with providing of hour meter for each feeder of

(i) Minimum incommer of 22 KW & Minimum outgoing 11 KW - 2 Working Feeder +2 feeder of 32 Amp (SD

Starter with MCCB with Rotary Handle, Contactor, O/L relay, cast resin type CT, Digital MFM, Analog Ammeter,

SPP, Timer etc.)

(ii) Minimum incommer of 18.6 KW & Minimum outgoing 9.3 KW - 2 Working Feeder (SD Starter with MCCB

with Rotary Handle, Contactor, O/L relay, cast resin type CT, Digital MFM, Analog Ammeter, SPP, Timer etc.)

Installation, Testing, Commissioning of Existing 7 KW MCC(1W+1S) Panel- Sanala Sub Hw to ESR

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

25 25.1 (i) 3 core 2.5 Sq. mm - For Sanala NC 20 Sump to Sanala Sub Hw & Sanala sub hw to ESR Section 150 Mts. 161.00 9.00

(ii) 3 core 4 Sq. mm - For Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Rate Labour

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make

OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

26 26 Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar 6 Job 4215.00 331.00

content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe

and accessories with medium class Rigid PVC pipe and accessories.

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s

1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core

28 28 flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge) 2 Nos. 1530.00 51.00

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must

have 440 VAC line supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings,

connectors, accessories etc complete. 70 Watt (Cat-II)

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer Dy. Executive Engineer

P.H.Mechanical Division Jamnagar P.H.Mech. Sub Division

ESTIMATE ANNEXURE (B-4)

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at Various

Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Danidhar HGLR Hw

Duty Point :- (1) Danidhar Hw to Bhavabhi Khijadiya & Bamangam:- 344 LPM X 50 Mtr. Head x 10 HP- ( 2 Set) &

(2) Danidhar Hw to Toda Section:- 263 LPM X 30 Mtr. Head x 5 HP- ( 2 Set)

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

(A) MECHANICAL EQUIPMENTS SECTION

Supply at site, Storage, Erection, Installation, Testing & Commissioning of Horizontal type Horizontal Monoset Sub

Pump (SM) set 2900 RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ± 10%, following IS 14220 along with suitable

foundation / Installation device with 15 Mtr Power & Control cable of following material of Construction:-Casing - C.I.

FG 260, Impeller - Bronze & Shaft- SS 410 etc as per detailed specifications & requirement comp.

(i) Capacity:- 344 LPM at 50 Mts. Head with minimum 10 HP motor ratings.- Danidhar Hw to Bhavabhi Khijadiya

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

(ii) Capacity:- 263 LPM(4.38 LPS) at 30 Mts. Head with minimum 5 HP motor ratings.- Danidhar Hw to Toda

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

Supplying, Installation, Testing & Commissioning in standard length ISI mark high density polyethylene H.D.P.E. Pipes

suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to dept. stores etc. comp.

90 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe for Both Section

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its

latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

100 mm Dia Medium Duty- Common Header Pipe for both Section

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS

Standard as per site requirement.

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Hand

Wheel/Cap Operated Sluice Valve as per IS: 14846 (Latest Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS Pipings including cost of all labour, jointing material, including nut bolts as per

5 5 specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection charges, 6 No. 3563.00 439.00

loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Both Section Delivery & Common Header Pipe

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged C.I. Reflux/ Non

return Valve with IS: 5312, of Approved make to be installed on DELIVERY/Common Header MS Pipings

including cost of all labour, jointing material,including nut bolts as per specification & requirement including all taxes,

6 6 insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental 6 Nos. 5348.00 439.00

stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Both Section Delivery & Common Header Pipe

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS

7 7 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS 1367 2 No. 3420.00 0.00

100 mm Dia (PN 1.0 Rating) for Common Header Pipe

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2"

NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube,

SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero adjustable pointer,

neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS

(a) 100 mm Dial Size- 0 to 6 Kg/cm2- For Panchdevda CWS to ESR

Chain Pulley Block (Manually Operated) :

Providing and erecting chain pulley block with triple gear arrangement, lifting hook, load chain and hand chain and

locking device with spur gear travelling trolley and all accessories.- Capacity: 1 Tons

SITC of suitable size ISMB I Beam girder, MS Channel, MS Angle, etc. required for minimum 1 Ton capacity loading /

unloading / lifting / lowering for making a structure suitable for installation of chain pulley block so as to removable of

the pump set for opeation and maintainace purposes to directly to load the same into the truck / pickup van, etc.

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel, Black

Trap Kapchi as Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Consolidating as per Cu.

Directive in 1:2:4 Ratio comp. as per site requriement Mtr.

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated,

Regular Power Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser with all accessories viz.

surge arrestor, associated cables, cabinets, hardwares, etc complete as per following specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic

Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode,

Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive

Paint Coil Housing with Junction Box, CS flanges.

12 12 (ii) Flow Transmitter/ Converter ( Remote Field Mounted): 2 No. 62244.00 3593.00

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser

display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one

status output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass

window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter communication

etc alongwith wall mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular Power Operated) 100 mm Dia (PN 1.0 Rating)

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete

with operating mechanism suitable to operate on 415V A.C. With HRC fuses of suitable load confirming to IS.

13 13 (Part I & III). of following capacities 1 No. 2492.00 43.00

(a) 63 Amp Cat-III

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

3 core 2.5 Sq. mm - For Both Section From Pump to Panel

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

SITC of LV MCC panel totally enclosed dust and vermin proof, indoor type, minimum degree of protection- IP 52 as

per IS 2147 operating on 3 ph. 4- wire 415v 50Hz neutral effectively grounded with instrument compartment

accomodating led type indicating lamps, control contactor as per IS 13947, CT of accuracy class -I as per IS

relays, meters & control MCBs, air insulated electrolitic grade aluminium bus bar for 3 phases and neutral system with

incoming braker-microprocessor based air circuit breakers(electrically operated drawout type)/air break fixed type

MCCB with trip free mechanism, current limit type as per IS 8828, motor contactor(as per type-2 co-ordination),

overload relay with built in single phasing prevention feature and auxiliary feeders as per SLD drawings, momentary

contact type push button, equipment fittings, bus bars, cable boxes, cable glands, incoming/outgoing cable

connections for 1100 volt grade al/cu conductor XLPE/PVC insulated & PVC sheathed armoured cable,10% spare

15 15 terminals, power wiring using1100 volts grade, FRLS insulated copper conductor wires confirming to IS 694 & 8130, 1 Nos. 27373.60 0.00

cable compartment/alleys of minimum 300 mm size, GI earth bus bar For entire length. MCC shall be fabricated from

cold rolled, cold annealed(CRCA) sheet steel and minimum thickness of various members shall be as follows. Base

frame/channel/gland plate-3mm, Load bearing member/doors-2mm and internal partitions-1.6mm with fixed APP type

capacitor bank to improve PF on each outer feeder with as shown below size as per IS & as per tech. specifications

with providing of hour meter for each feeder of

Minimum incommer of 15 KW & Minimum outgoing 7.5 KW - 2 Working Feeder +2 feeder of 32 Amp (SD Starter

with MCCB with Rotary Handle, Contactor, O/L relay, cast resin type CT, Digital MFM, Analog Ammeter, SPP, Timer

etc.)- For Danidhar Hw to Bhavabhi Khijadiya & Bamangam Section

SITC of DOL starter suitable for local & remote pump control application consisting of MPCB, overload relay and

contactors as per Type II coordination including digital voltmeter, analogue ammeter with selector switch, run hour

16 16 meter, required protective relays & control accessories. 2 Nos. 6924.00 0.00

D. O. L. - 5 HP Capacity for Toda Section

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 / meter testing

17 17 as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- 4 Job 4215.00 331.00

Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and

accessories with medium class Rigid PVC pipe and accessories.

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

LIGHTING DISTRIBUTION BOARD:

Providing & Erecting following type of Modular type accessories mounted with PVC/ metallic box, single mounting base

frame covered with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In

charge. 6 no. 16A single Pole Modular MCB Switch, Cat. II (1 point of pump room inside lights, 4 point of pump room

outside lights, 1 point of celling fan) & 1 No. incomer 40 Amp. DP ELCB/RCCB for lighting & inductive load (C Curve)

having 10kA breaking capacity & confirming to IS

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must

have 440 VAC line supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings,

connectors, accessories etc complete. 70 Watt (Cat-II)

Supplying and erecting R&B approved make of LED Suraface mounted luminaire with rear reflector suitable for office

and laboratory applications with 22-24 Watt LED (Cat.II) Lamp with all required fittings, connectors, accessories

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s

1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core

22 22 flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge) 1 Nos. 1530.00 51.00

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer Dy. Executive Engineer

P.H.Mechanical Division Jamnagar P.H.Mech. Sub Division

ESTIMATE ANNEXURE (B-5)

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Bavakhakhariya Boosting Hw

Duty Point :- (1) Bavakhakhariya Hw to Jivapar Village:- 440 LPM X 52 Mtr. Head x 15 HP- ( 2 Set)

Rate (Rs.) Total

Sr. Item Supply Rate Labour

Description of Item Qty Unit Rate

(A) MECHANICAL EQUIPMENTS SECTION

Supply at site, Storage, Erection, Installation, Testing & Commissioning of Horizontal type Horizontal Monoset

Sub Pump (SM) set 2900/1450 RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ± 10%, following IS 14220 along

with suitable foundation / Installation device with 15 Mtr Power & Control cable of following material of

Construction:-Casing - C.I. FG 260, Impeller - Bronze & Shaft- SS 410 etc as per detailed specifications &

requirement comp.

(i)Capacity:- SM 2.9:- 440 LPM(7.33 LPS) at 52 Mts. Head with minimum 15 HP motor ratings.

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

Supplying, Installation, Testing & Commissioning in standard length ISI mark high density polyethylene H.D.P.E.

Pipes suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to dept. stores etc.

90 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its

latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

3 3 100 mm Dia Medium Duty- Common Header Pipe 6 Mtr 864.00 86.40

Rate (Rs.) Total

Sr. Item Supply Rate Labour

Description of Item Qty Unit Rate

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent

IS Standard as per site requirement.

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Hand

Wheel/Cap Operated Sluice Valve as per IS: 14846 (Latest Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS Pipings including cost of all labour, jointing material, including nut bolts as per

specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Delivery & Common Header Pipe

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged C.I. Reflux/

Non return Valve with IS: 5312, of Approved make to be installed on DELIVERY/Common Header MS

Pipings including cost of all labour, jointing material,including nut bolts as per specification & requirement

6 6 including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, 3 Nos. 5348.00 439.00

unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Delivery & Common Header Pipe

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS

7 7 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS 1367 1 No. 3420.00 0.00

100 mm Dia (PN 1.0 Rating) for Common Header Pipe

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom

1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon

Tube, SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero

8 8 adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. 3 Nos. 950.00 79.00

(a) 100 mm Dial Size- 0 to 6 Kg/cm2

Total of Section-(A) Rs.

Rate (Rs.) Total

Sr. Item Supply Rate Labour

Description of Item Qty Unit Rate

(B) POWER DISTRIBUTION SECTION

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

3 core 4 Sq. mm - For Pump to Panel

SITC of LV MCC panel totally enclosed dust and vermin proof, indoor type, minimum degree of protection- IP

as per IS 2147 operating on 3 ph. 4- wire 415v 50Hz neutral effectively grounded with instrument compartment

accomodating led type indicating lamps, control contactor as per IS 13947, CT of accuracy class -I as per IS

relays, meters & control MCBs, air insulated electrolitic grade aluminium bus bar for 3 phases and neutral system

with incoming braker-microprocessor based air circuit breakers(electrically operated drawout type)/air break fixed

type MCCB with trip free mechanism, current limit type as per IS 8828, motor contactor(as per type-2 co-

ordination), overload relay with built in single phasing prevention feature and auxiliary feeders as per SLD

drawings, momentary contact type push button, equipment fittings, bus bars, cable boxes, cable glands,

incoming/outgoing cable connections for 1100 volt grade al/cu conductor XLPE/PVC insulated & PVC sheathed

armoured cable,10% spare terminals, power wiring using1100 volts grade, FRLS insulated copper conductor wires

10 10 confirming to IS 694 & 8130, cable compartment/alleys of minimum 300 mm size, GI earth bus bar For entire 1 Nos. 40148.00 0.00

length. MCC shall be fabricated from cold rolled, cold annealed(CRCA) sheet steel and minimum thickness of

various members shall be as follows. Base frame/channel/gland plate-3mm, Load bearing member/doors-2mm

and internal partitions-1.6mm with fixed APP type capacitor bank to improve PF on each outer feeder with as

shown below size as per IS & as per tech. specifications with providing of hour meter for each feeder of

Minimum incommer of 22 KW & Minimum outgoing 11 KW - 2 Working Feeder +2 feeder of 32 Amp (SD

Starter with MCCB with Rotary Handle, Contactor, O/L relay, cast resin type CT, Digital MFM, Analog Ammeter,

SPP, Timer etc.)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make

OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

11 11 Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar 2 Job 4215.00 331.00

content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rate (Rs.) Total

Sr. Item Supply Rate Labour

Description of Item Qty Unit Rate

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s

1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core

12 12 flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge) 2 Nos. 1530.00 51.00

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer Dy. Executive Engineer

P.H.Mechanical Division Jamnagar P.H.Mech. Sub Division

ESTIMATE ANNEXURE (B-6)

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Sursangda Boosting Hw

Duty Point :- (1) Sursangda Boosting Hw :- 440 LPM X 30 Mtr. Head x 10 HP- ( 2 Set)

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

(A) MECHANICAL EQUIPMENTS SECTION

Supply at site, Storage, Erection, Installation, Testing & Commissioning of Horizontal type Horizontal Monoset

Sub Pump (SM) set 2900/1450 RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ± 10%, following IS 14220 along

with suitable foundation / Installation device with 15 Mtr Power & Control cable of following material of

Construction:-Casing - C.I. FG 260, Impeller - Bronze & Shaft- SS 410 etc as per detailed specifications &

requirement comp.

(i)Capacity:- 440 LPM(7.33 LPS) at 30 Mts. Head with minimum 10 HP motor ratings.

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

Supplying, Installation, Testing & Commissioning in standard length ISI mark high density polyethylene H.D.P.E.

Pipes suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to dept. stores etc.

90 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its

latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

3 3 100 mm Dia Medium Duty- Common Header Pipe 6 Mtr 864.00 86.40

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent

4 4 IS Standard as per site requirement. 150 Kgs. 96.00 9.60

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Hand

Wheel/Cap Operated Sluice Valve as per IS: 14846 (Latest Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS Pipings including cost of all labour, jointing material, including nut bolts as per

specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Delivery & Common Header Pipe

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged C.I. Reflux/

Non return Valve with IS: 5312, of Approved make to be installed on DELIVERY/Common Header MS

Pipings including cost of all labour, jointing material,including nut bolts as per specification & requirement

6 6 including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, 3 Nos. 5348.00 439.00

unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Delivery & Common Header Pipe

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS

7 7 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS 1367 1 No. 3420.00 0.00

100 mm Dia (PN 1.0 Rating) for Common Header Pipe

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom

1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon

Tube, SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero

8 8 adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. 3 Nos. 950.00 79.00

(a) 100 mm Dial Size- 0 to 6 Kg/cm2

Total of Section-(A) Rs.

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

(B) POWER DISTRIBUTION SECTION

Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting

complete with operating mechanism suitable to operate on 415V A.C. With HRC fuses of suitable load confirming

9 9 to IS. 13947 (Part I & III). of following capacities 1 No. 2492.00 43.00

(a) 63 Amp Cat-III

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

3 core 2.5 Sq. mm - For Both Section From Pump to Panel

SITC of Star Delta starter suitable for local & remote pump control application consisting of MPCB, overload relay

and contactors as per Type II coordination including digital voltmeter, analogue ammeter with selector switch, run

11 11 hour meter, required protective relays & control accessories. 2 Nos. 9128.00 0.00

S.D. - 10 HP Capacity for Toda Section

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make

OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

12 12 Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar 2 Job 4215.00 331.00

content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rate (Rs.) Total

Sr. Item Amount (Rs.)

Description of Item Qty Unit Supply Labour

No. No. Rate Rate

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s

1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core

13 13 flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge) 1 Nos. 1530.00 51.00

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer Dy. Executive Engineer

P.H.Mechanical Division Jamnagar P.H.Mech. Sub Division

ESTIMATE ANNEXURE (B-7)

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- All Boosting Hw (Juvanpar Boosting Hw, Deri Boosting Hw, Bavakhakhariya Boosting Hw, Morvadi Boosting Hw & Motivavdi Boosting Hw)

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

(A) MECHANICAL EQUIPMENTS SECTION

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of MS Pipe conforming to IS-3589-

2001 or its latest revision/ammendment including loading, unloading conveyance to site, stacking etc.

Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (for Common Header Pipe- For Juvanpar Boosting Hw,

Deri Boosting Hw & Morvadi Boosting Hw)

Pipe dia in OD- 273 mm, Thickness- 5.0 mm (for Common Header Pipe- For Bavakhakhariya Boosting

1.2 Hw & Motivavdi Boosting Hw) 12 Mtr 2336.00 233.60

Pipe dia in OD- 168.3 mm, Thickness- 4.5 mm (for Delivery Pipe- All Boosting Hw)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or

its latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all

2 2 complete. 30 Mtr 598.00 59.80

80 mm Dia Medium Duty- (for By Pass Pipe- All Boosting Hw)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction

Strainer, Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as

3 3 per relevent IS Standard. - For All Boosting Hw 800 Kgs. 96.00 9.60

For 168.3 mm OD, 219.1 mm OD, 273 mm OD & 80 mm dia Pipe

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged

Butterfly Valve as per IS 13095 (Latest Edition) with sleeve of EPDM & disc, shaft & internal partsof SS-410,

of Board Approved make to be installed on Suction MS Pipings including cost of all labour, jointing material,

including nut bolts as per specification & requirement including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc.

(i) 150 mm Dia (PN 1.0 Rating) for Delivery Pipe- All Boosting Hw

(ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Juvanpar Boosting Hw, Deri Boosting Hw

4.2 & Morvadi Boosting Hw 3 No. 5866.00 742.00

(ii) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Bavakhakhariya Boosting Hw & Motivavdi

4.3 Boosting Hw 2 No. 8563.00 946.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged Swing

Plate Type Dual Plate Check Valve of Approved make to be installed on DELIVERY MS Pipings including

cost of all labour, jointing material,including nut bolts as per specification & requirement including all taxes,

insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to

departmental stores/site, stacking etc. complete.

(i) 150 mm Dia (PN 1.0 Rating) for Delivery Pipe- All Boosting Hw

(ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Juvanpar Boosting Hw, Deri Boosting Hw

5.2 & Morvadi Boosting Hw 3 No. 15929.00 742.00

(ii) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Bavakhakhariya Boosting Hw & Motivavdi

5.3 Boosting Hw 2 No. 26759.00 946.00

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of

overall length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie

rods etc. of following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr.

6 6.1 304; Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: 4 No. 7745.00 0.00

(iii) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe & flowmeter- For Bavakhakhariya Boosting

Hw & Motivavdi Boosting Hw

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

(ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe & Flowmeter- For Juvanpar Boosting Hw, Deri

6.2 Boosting Hw & Morvadi Boosting Hw 6 No. 6216.00 0.00

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom

1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L

Bourdon Tube, SS 316 Movement material, Aluminium dial with black graduation on white background, Micro

7 7 Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. 15 Nos. 950.00 79.00

(a) 100 mm Dial Size- 0 to 6 Kg/cm2- For All Boosting Hw

Chain Pulley Block (Manually Operated) :

Providing and erecting chain pulley block with triple gear arrangement, lifting hook, load chain and hand chain

8 8.1 and locking device with spur gear travelling trolley and all accessories.- Capacity: 1 Tons- For Juvanpar Hw 1 No. 14400.00 0.00

Chain Pulley Block (Manually Operated) :

Capacity: 2 Tons- For Deri Boosting Hw, Bavakhakhariya Boosting Hw, Morvadi Boosting Hw &

Motivavdi Boosting Hw

SITC of suitable size ISMB I Beam girder, MS Channel, MS Angle, etc. required for minimum 1 Ton capacity

loading / unloading / lifting / lowering for making a structure suitable for installation of chain pulley block so as

to removable of the pump set for opeation and maintainace purposes to directly to load the same into the truck

/ pickup van, etc. complete.- For All Boosting hw

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel,

Black Trap Kapchi as Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work,

Consolidating as per Directive in 1:2:4 Ratio comp. as per site requriement

Total of Section-(A) Rs.

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

(B) POWER DISTRIBUTION SECTION

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing

16 G.M.S. housing.

ICU=100% of ICS only of Cat-III

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) With medium class

13 13 Rigid PVC pipe and accessories with medium class Rigid PVC pipe and accessories. 80 Mtr 131.00 8.00

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

LIGHTING DISTRIBUTION BOARD:

Providing & Erecting following type of Modular type accessories mounted with PVC/ metallic box, single

mounting base frame covered with textured/ metallic front plate, modules erected with necessary connection as

desired by Engineer In charge. 4 no. 16A single Pole Modular MCB Switch, Cat. II (1 point of pump room

inside lights, 2 point of pump room outside lights, 1 point of celling fan) & 1 No. incomer 40 Amp. DP

ELCB/RCCB for lighting & inductive load (C Curve) having 10kA breaking capacity & confirming to IS 8828. -

For All Boosting Hw

Rate (Rs.) Total Amount

Rate (Rs.) Total Amount

Description of Item Qty Unit Supply Labour

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light

must have 440 VAC line supply protection. It should withstand 48 Hours for 440 VAC line supply with required

fittings, connectors, accessories etc complete. 70 Watt (Cat-II) - For All Boosting Hw

Supplying and erecting R&B approved make of LED Suraface mounted luminaire with rear reflector suitable for

office and laboratory applications with 22-24 Watt LED (Cat.II) Lamp with all required fittings, connectors,

accessories complete. - For All Boosting Hw

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50

c/s 1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 ,

17 17 core flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer 5 Nos. 1530.00 51.00

incharge) - For All Boosting Hw

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer Dy. Executive Engineer

P. H. Mechanical Division Jamnagar P. H. Mech. Sub Division