REPAIR/ MAINT TO JOINERY, ROOF SHEET AND ALLIED WORK IN POCKET 9 (SAHARANPUR) IN AGE B/R-III UNDER GE ROORKEE

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but n. exceeding 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm each.

M&L for resecuring or easing of door / window shutter n.exc 1.00 sq m in size without taking down and making operation in all respects complete all as directed.

M&L for resecuring or easing of door / window shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operation in all respects complete all as directed.

S &F for pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S & F for pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S &F for factory made Flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed.

S&F for 35 mm thick IInd class HW Factory Made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkatsall as specified and directed.

S & F for solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame rails welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at side as per specification and drawing complete all as specified and as directed by Engr -in- charge.

S&F for windows made of pre-painted steel ( Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12 mm and section for shutter should be of 52x25mm, Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flate beading for provision of guard bars/grill. Flymesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2 nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and SS mesh for fly mesh shutter with 0.36 mm dia of wire and 1.4 mm aperture. Rubber Gaskets are provided all around the glass. The above frame should be fixed to the concrete/masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm alaround except runner portion complete all as specified and directed.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings , steel sheeting or other covering, running rails and guides and hanging; also fastening and fixing Fe- 290 (Gde E- 165) complete all as specified and directed.

S&F for anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron).for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for anodised aluminium window and ventilator shutters, powder coated (minimum thickness of powder coating 50 micron). fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed.

S&F for anodised aluminium window and ventilator shutters, powder coated (minimum thickness of powder coating 50 micron). side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F for anodised aluminium door shutters, powder coated (minimum thickness of powder coating 50 micron).aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L for PCC(1:3:6) type C1 as in bed blocks for hold fast including necessary formwork complete all as specified and directed.

S & F for mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specified and directed.

S & F for 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles not exceeding 200 cu cm each all as specified and directed.

S & F for 100mm size butt hinges cold rolled mild steel medium weight, ISI marked complete all as specified and directed.

S & F for 140 mm long over all length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in with door all as specified and directed.

S&F for 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S & F for 150 mm size Aluminium anodised handles cast type, complete all as specified and directed.

S&F for mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F for mild steel sliding door bolts,300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

S & F for in repairs door closer hydraulically regulated designation no. 1 universal type , suitable for door shutters upto 700mm in widht and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S & F for galvanised mild steel wire mess 0.56mm nominal dia of wire and average width of appearature 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified and directed.

M&L for for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed.

Materials and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, including demolition of old bricks in cement mortar complete all as specified & as directed.

Taking down cement plaster on brick or concrete walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or on stone masonry surfaces and finished even and fair without using extra cement complete all as specified and directed by Engr - in - charge.

M&L for three coat of white wash on wall including preparation of new plastered surfaces all as specified and directed by Engr-In-Charge.

M&L for light colour (Digital colour) Vitrified Ceramic tiles 8 to 10 mm hick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade incl 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified.

Taking down shutters of any description exc 1 sq. m and n. exc 2 sq. m each and refixing in same opening complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in levelling course complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads complete.

S&F for 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks,or galvanised wire staples as in repair complete all as specified and directed.

M&L for solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling as per specifications and drawing complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S & F for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc. including dismantling complete all as specified and directed.

Please Enable Macros to View BoQ information