Renovation of Pathayapustak Mandal building at district GANDHINAGAR.

Demolition of Brick work and stone masnoary including

1 stacking of sericeable materials and disposal of unsericeable 152.12 577.92 Cmt

materials with all lead and lift. (ii) in cement mortar

Dismentalling tiled or stone floors laid in mortar including

2 stacking of serviceable materials and disposal of unserviceable 2592.40 50.11 Smt

materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any thickness

from wall/RCC member including staking of serviceable

material and disposal of unserviceable materials from site work

with all lead and lift

Dismentling Doors/windows, ventilators etc.( wood or steel)

shutters including chowkhats architraves, holdfasts and other

attachments and staking all with all laead and lift. (A) Not

exceeding 3.0 Sq.mt. area

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes

5 with fittings and clamps including stacking the materials with all 48.00 78.51 Rmt

lead and lift ( for any dia, of pipe)

Dismentling sanitary fittings like wash basin, Indian WC pan,

6 Europian WC pan,flushing tank etc. including stacking the 20.00 405.65 Nos.

materials with all lead and lift

Demolition including stacking of serviceable materials and

7 disposal of unserviceablematerials with all lead and lift. (A) R.C.C 176.33 1110.75 Cmt

Box cutting the road surface to proper slope and camber for

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto

50Mt.lead.

Rolling of earthwork in layers with power roller including

filling indepressions which occur during the process.

Excavation for foundation upto 1.5 m depth including

10 sorting out and stacking of useful materials and disposing 58.50 123.13 Cmt

off the excavated stuff upto 50 Meter lead.(A)Loose or soft soil

Excavation for foundation for depth from 1.5 m to

mincluding sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(D) Soft rock not

requiringBlasting

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not exceeding

20cm in depth consolidating each deposited layer by ramming

andwatering.

14 layers of 20 cm. thickness inculding watering, ramming and 255.60 277.14 Cmt

consolidationetc. complete.

Spreading the stone aggregate for rolling and W.B.M. including

15 filling the interstices to required camber and gradient (excluding 235.10 268.92 Cmt

spreading of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.

Providing and laying controlled cement concrete M.150 for

curingcomplete including cost of formwork and excluding cost

16 of reinforcement for reinforced concrete work in (A) 239.43 4219.15 Cmt

Foundations, footings,Base of columns and Mass

concrete (Cement Level 290 Kg)

Providing and laying controlled cement concrete work M200 and

curing completeincluding the cost of form work but excluding

the cost of reinforcement of reinforced concrete work in C)

Description Of Item Quantity Rate Unit Amount

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but

excluding the cost of reinforcement of reinforced concrete

work in Beams. (D) Ground Beams and plinth beams.

Providing and laying controlled cement concrete work M200 and

curing complete including the cost of form work but

excluding the cost of reinforcement of reinforced concrete

work in Lintel or Copping. (H) Lintels

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base ofcolumns and Mass concrete.

Providing TMT Bar FE 500/500D reinforcement for

21 R.C.C. work includingbending, binding and placing in position 10000.00 77.29 Kg.

complete upto floor two level

Brick work using common burnt clay building conventional

bricks having crushing strength not less than 35 Kg/Sq. cm. in

foundation and plinth in cement mortar 1:4 (1 Cement :4 fine

sand) (C) Fly AshBricks(For Earth Quack Zone )

Providing 15mm thick cement plaster in single coat on rough or

fair side of single or half brick wall for interior plastering

23 including finishing with a floating coat of neat cement slurry in 624.60 211.46 Smt

cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat

ofC.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M.1:1 (1-cement : 1-sand) etc. complete.

25 Providing 20mm deep finished groove . etc.comp 1341.00 25.25 Rmt

Heritage Plaster Work onexteriourwork upto any height

26 aboveground level including scafollding & lift,planks,etc 1000.00 717.10 Smt

Description Of Item Quantity Rate Unit Amount

Waterproofing Works: Surface Preparation and Leak test: -

The surface of application must be thoroughly prepared by

mechanical means, to remove all loose particles, laitance, etc. -

Oil and grease, if any, must be de-greased with suitable

solvents. It then must be washed off with jet of water and brought

to touch dry state. Chase the construction joints, cracks and seal

the same by, a) groove filling by, a.1) forming a U shaped

groove of size (width and depth) as required as per

manufacturer''s specifiatoin & made clean a.2) apply priming

coat of Dr. Fixit pidiprime or equivalent and, a.3) Fill the

groove with Dr. Fixit PU sealant or equivalent. and, b)

Grouting by, b.1) Drilling hole of required size into the structure

and fixing grouting nozzle. Allowing nozzle to set for 24 hours,

b.2) grouting the nozzles with Cement Slurry admixed with Dr.

Fixit Pidicrete AM @ 225 gm/bag of cement, non-shrink grout to

full saturation using gravitational pressure and b.3) Seal the

nozzle loation from the top by providing and applying Dr.

Fixit HB Mortar / Hydroblok300 non-shrink polymer mortar,

curing etc. complete. - Treatment around pipe entry / exit

locations from internal side: 1) Providing and applying Dr.

Fixit Bathseal Tape or equivalent around the pipe periphery within

the cut outs section of the slab, 2) Providing and applying Dr. Fixit

Bathseal grout or equivalent non-shrink, free flow, high strength

cementitious grout material to seal the angular gap around pipe

periphery and core cut in the slab and, 3) providing and

applying Dr. Fixit / Bostik or equivalent PU sealant around

the top periphery of pipe all as per manufacturer''s

recommendation. - Necessary leak test/pond test for 48 Hrs. before

and after the surface preparation is mandatory for

certification 1) Providing and applying one coat of Dr. Fixit

Torchshield Primer or equivalent at a rate of 3-5 Sqm/ litre / coat,

2) Providing and applying Dr. Fixit Torchshield APP membrane

Flooring Works: Providing and laying cement concrete flooring

1:2:4 (1-cement : 2- coarse sand : 4- graded stone aggregate 20mm

nominal size) laid in one layer andfinished with a floating coat of

neat cement. (B) 40mm thick.

Providing & laying 24"x24" vitrified 8mm thick tiles flooring

over 20mm (average) base of cement mortar

1:6(1cement:6course sand) on new surface or fixing on exiting

flooring by adhesivematerial including dismentalling of

existing flooring and jointed with colour cement slurry

including finish with flush pointing and cleaning the surface

etc. complete for antiskid.(As Per List of Approved

Materials) for Light/Dark shade as per the givenpattern.

Extra for providing and grouting grooves of size up to 5mm

x 5mm with epoxy grout in floor or dado of size 600 mm x

600mm with PVC spacer and matching colour epoxy grout of

BAL or equivalent of approved shade. Rate shall be inclusive of

cleaning the grooves, protecting the edges before filling, and

cleaning the tiles on completion etc. all complete as per

detailed specifications and instructions of Engineer in charge.

Rate shall be paid for actual area of floor/dado grouted.

Providing and laying 18 mm thick mirror polished black

granitestone machine cut in single piece (Max. available) in sill

and jambs laid over 10 mm thick cemen mortar 1 : 3 (1 cement :

31 coarse sand) and jointed with grey cement slurry with matching 411.33 2061.10 Smt

pigment incl. rubbing and polishing half rounding edge both side

etc. complete colour and shed as approved by architect engineer in

charge. (Asdirected by Engineer in charge)

Description Of Item Quantity Rate Unit Amount

providing & laying cement water proofing of average 60mm thick

for terrace for all floors using first layer cement mortar (1:3) over

an exsisting surface second layer of arranging brick bats acording

to slop adding suitable chemical to make water tieght & again

third layer of cement mortar 1:3 on above including adding water

proffing compound and finishing top with net cement slury using

cement @2.75 kg/sq mt. making any patterns and design on the

top etc. complete as directed.(As directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain &

curve surface 12mm to 20mm of broken piece of ceramic tiles or

Glazed tiles ( one or more colour as directed by Engg. In charge )

to be laid over cement mortar bedding of CM 1:3 to plain or and

33 slopes and to be tempered to bring mortar cream up to and colour 675.04 779.70 Smt

pigment including rounding of junctions and extending them pu to

15cms along the wall and curing with bends any patterns of

designs as per deawing or directions including cleaning with water

and oxilic acid using 1 kg / 1 bag of water proofing materials.

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

34 per approved design Confirming to IS 15658 : 2006 including 35 300.00 706.90 Smt

mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30 cm length, 30cm height and 15cm thick of

35 M250 grade concrete as per aprooved design and including 176.33 374.92 Rmt

excavation for fixing in proper line and level, filling the joint with

C:M 1:3 (1 Cement : 3 Fine sand) etc. complete (uptp 10 ton).

Providing, fabricating and fixing in position aluminium section for

doors, windows, vent, sun breakers, facade etc. as per

approved shop drawings and aluminum sections of approved

make like Jindal or equivalent of 20microns colour anodize

approved shade sections all floors, all levels, all heights, all shapes

and for all sizes as per the drawing, specification or as directed by

Architect or Engineer - in - Charge. Rate shall be inclusive of

providing aluminium sections (conventional or Euro- profile),

Rate should include complete finished item with necessary

assessories, hardware and other requirements. Work shall have

to be carried out as per the approved shop drawings and

approved sample. All the aluminium section will be

considered under this item with all the necessary assessories,

hardware only shall be paid extra. Payment shall be done as per

drawing/laid at site, glass, panels shall be paid in relevant tender

Clear Float Glass: Providing and fixing clear float glass of

specified thickness in frame work, shelves with necessary cutting

of glass as per drawing & specifications including providing and

fixing EPDM quality rubber for aluminum sections / filling

transparent neutral cure glazed & metal silicon sealant of

37 approved make on the periphery of the glass & wood etc. 744.96 1113.02 Smt

complete at all floors, all levels, all hights and in all shapes as

per the directions of Architect/Engineer-in-charge. Rate shall

be inclusive of glass finshing,consumable hardware, tools, tackles

etc. Actual installed area of glass shall be measured and paid in

sqm. a) 6 mm thick

Description Of Item Quantity Rate Unit Amount

Providing and fixing compact sheet of approved make having

specified thickness and shade of exterior grade quality in

Aluminum frame work with necessary cutting of sheet as per

drawing & specifications including providing and fixing

EPDM quality rubber / siicon sealant on the periphery of the

sheet as per the required thickness as per the directions of

Architect/Engineer-in-charge. Actual installed quantity shall be

measured and paid. (a) 4 mm. thick

Providing and fixing of highly durable precoated Roofing Sheets

having high quality color coating throughout the roof and having

minimum 0.6 mm thickness .The Color Coated sheet Roofing

fixed with galvanized iron /color powder coated J or L Hooks,

Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer

or color powder coated limpet washer. filled with white lead

complete as per approved sample and color as directed by engineer

Providing ridges or hips 600 mm overall in precoated G.I. sheet

40 class-3 fixed with G.I.J. or L Hooks and nuts 8mm dia G.I. Limpet 200.00 990.31 Smt

and bitumen washer complete. (1) 0.60 mm thick sheet.

Paint Works: Providing and applying Easy clean, Washable

INTERNAL 100% Acrylic paint (Premium Plastic Paint) -

approved make like premium emulsion of asian or easy clean

rangoli of Berger or equivalent, color & shade in three coats (first

one coat with brush and final two coats with roller), on newly dry

interior plastered surface at all heights, all floors, all levels

complete to give an even shade, including required coats (minim

um two coats) white cement based putty of Birla white /

Acrylic putty of Asian paint or equivalent after thoroughly

brushing the surfaces free from mortar dropping and other

foreign matter and also including preparing the surface even

and sand papered smooth etc. after applying every coat of

putty. Priming coat of alkali resistant cement primer (water or

solvent based) is to be applied before commencement of

painting etc. complete as directed by engineer-in- charge. Sample

to be approved by Architect and Engineer in charge before starting

of the work. The rates shall include the cost of filler for filling the

cracks on surface

Wall painting two coats with weather proof 100% acralic emulsion

APEX type paint of approved brand & manufacture and of

required shade on exterior wall surface to give an even shade over

and including a primery coat with alkaly resistance primer of

approved brand after throughly brushing surface to remove all dirt

and remains of loose powdered

Steel work, M.S Grill, welded in built up sections framed

workincluding cutting, hoisting, fixing in position and applying a

priming coat of read lead paint. (A)In beams and joists, channels

angles Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to

common rafters andthe like

Structural steel work ( Confirming to IS 4923-1997) riveted,

bolted or welded in builtup for all type sections, in framed work,

including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer all complete as per the

structural designs and directions of Engineer in charge.Column (

Description Of Item Quantity Rate Unit Amount

Providing and FixingProviding and

fixingwindowhavingextrudedaluminumColouranodized section

frame main outer size 127mm x 38.10mm x 1.35mm@ wt.of

Kg/mt, horizontal four track member size 122.20mm x 31.75mm x

1.10mm, @Wt.1.205 Kg/mt, vertical member of size

122.20mmx31.75mmx1.50mm@ Wt. 1.398 Kg/mt, with sliding

shutters of horizontal member size [email protected]

0.456Kg/mt,verticalmemberofsize 40mmx18mmx1.29mm@wt. of

0.456 Kg/mt with 5 mm thick transparent bronze colour tinted

float toughened glass with powder coated aluminumfittings and

fixtures and transparent silicon sealant glass fixing to frame as per

details etc.c with Dommel Section Detail as per Architech.

Ply False Ceiling: Providing and fixing of ply false ceiling, Using

50 mm x 25 mm x 1.5 mm thick aluminum extruded section for

frame work at 600mm C/C on both direction and suspenders

to be fixed on the roof slab / beam, by using metal

expansion fasteners (wt. Type) of 12.5 mm dia. to a length of

mm with 6 mm dia. bolt / screw at top ends. Bottom side of the

frame are covered with 12mm thick MR Grade ply in design

and pattern as per drawing. The rate shall be inclusive of

necessary countersunk, all cutting for light fixture, down

lighter, sprinklers and speakers and AC grill heavy duty screws,

hardware and adhesives etc.; Teakwood edge beadings to be

provided as directed. CEILING: Providing and fixing eco-

GRID ACCOUSTIC

friendly light weightcalcium silicate false ceiling tiles having

Tegular edge & 15 mmThick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity0.043° w/m KC.for the

best thermal Insulation. The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/ Spintone/Cosmos having

NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal

level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner suitably

spaced at joints to get required length and size of 24X38mm

made from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of

0.33mm(Minimum) sheet spaced 1200mmalong spaced between

main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form grid

of size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl

plugs at 450mm centre to centre with 25mm long dry wall screws

@ 230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting

/making opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever required, Main ‘T’

runners to be suspended from ceiling using G.I. slotted cleats

Description Of Item Quantity Rate Unit Amount

Veneer: Providing and fixing 4 mm thick Veneer (0.6 MM Core

layer on gurjen ply base) of approved make and shade

including for pelmets, raceways, ply false ceilings, wall

cladding, wall paneling etc, on with necessary nails, screws,

adhesives, 6mm thick best quality ghana teak lipping patti as

sorted for uniform straight lined, light colored from matching

group. The rate shall be for all heights, all floors, all places, etc.

This item shall not be measured and paid only for items where in

the rates of providing veneer is not included in the item

description. a) Basic cost of Veneer = Rs. 1500/Sqm F.O.R. at

Monocoat Polish: Providing and applying monocoat polish for

internal wooden & veneered surfaces including surface

preparation, applying filler / hardener / putty, sanding,

cleaning of furniture after completion of job etc. to the

satisfaction of architects / EIC. (Mode of measurements :Only the

polished area shall be measured & paid for the items in which

polishing is not inclusive in item description)work shall be

carried out as per the manufacture''s specification & sample

approved. The final coat should be sprayed by gun with pressure

as per requirement.

Providing and Fixing in position bought out/ Loose furniture as

sample approved by EIC/Architect as per below specifications.

The work shall be measured and paid in Nos. The rates shall be

inclusive of linsead oil / lacquer finish polishing, plywood, veneer,

fabric, MS and all material, labour, wastages, taxes, transportation,

loading, unloading, fixing in position including protecting the

same against any dents and skretched etc. at all heights, all

floors, all levels complete to the satisfaction of the Architect and

EIC. Chair - 5: Mid Back Chair (FEATHERLITE

OR EQUIVALENT) - ANATOM MB

Providing and Fixing in position bought out/ Loose furniture as

sample approved by EIC/Architect as per below specifications.

The work shall be measured and paid in Nos. The rates shall be

inclusive of linsead oil / lacquer finish polishing, plywood, veneer,

fabric, MS and all material, labour, wastages, taxes, transportation,

loading, unloading, fixing in position including protecting the

same against any dents and skretched etc. at all heights, all

floors, all levels complete to the satisfaction of the Architect and

EIC. Chair - 4: High Back Chair (FEATHERLITE

OR EQUIVALENT) - ANATOM HB

Description Of Item Quantity Rate Unit Amount

Corner Table: Providing, making and fixing Corner table of size

600 mm x 600 mm x 400 mm as per reference drawing. Material

of Construction: 1) Table legs to be made of 60 mm x 60 mm

solid wood members of ivory coast teak wood. 2) Supporting

frame member on the periphery to be provided of size 50 mm x

mm of ivory coast teak wood. 3) Table top to be provided with

mm thick back painted toughened glass. 4) All exposed members

of wood to be provided with melamine polish. The work shall

be done as per the approved shop drawing (to be prepared by

52 contractor), specifications, sample approved and as directed 28.00 10446.59 Nos.

by the Architect and Engineer-in-charge. The rate shall be for

complete item inclusive of all material, labour, wastages,

necessary tools & tackles,adhesives, consumable hardwares &

required SS 304 grade hardware/accessories of approved make (if

applicable) for all floors, all heights, all levels and all places

within campus. Contractor shall do all the needful and shall

fulfill Architect''s design intent. No additional claims will be

entertained for this. The unit shall be manufactured in parts and

these parts shall be assembled at site.

Providing and Fixing in position bought out/ Loose furniture as

sample approved by EIC/Architect as per below specifications.

The work shall be measured and paid in Nos. The rates shall be

inclusive of linsead oil / lacquer finish polishing, plywood, veneer,

fabric, MS and all material, labour, wastages, taxes, transportation,

loading, unloading, fixing in position including protecting the

same against any dents and skretched etc. at all heights, all

floors, all levels complete to the satisfaction of the Architect and

EIC. SINGLE SEATER SOFA : FEATHERLITE : BEIGE

COLOUR OR EQUIVALENT

Providing and Fixing in position bought out/ Loose furniture as

sample approved by EIC/Architect as per below specifications.

The work shall be measured and paid in Nos. The rates shall be

inclusive of linsead oil / lacquer finish polishing, plywood, veneer,

fabric, MS and all material, labour, wastages, taxes, transportation,

loading, unloading, fixing in position including protecting the

same against any dents and skretched etc. at all heights, all

floors, all levels complete to the satisfaction of the Architect and

EIC. THREE SEATER SOFA : FEATHERLITE OF

BEIGE COLOUR OR EQUIVALENT

Description Of Item Quantity Rate Unit Amount

Work Desk: 1 Providing, making, polishing and fixing table of

size 1500 x 750 x 750 mm as per reference drawing. Material of

Construction: 1) Table Top: 25 mm thick laminated table top

comprising of solid box prepared by 19 mm thick BWR ply. The

top shall be finished with 1 mm thick laminate sheet of

approved shade, finish and make. Ply shall confirm to IS 303. The

table top sides of 25 mm thickness shall be finished with 0.8 mm

thick teak wood beading. 2) Table Legs: The table legs shall be

made by 25 mm thick BWR ply confirming to IS 303 to be

finished with 1 mm thick laminate of approved make, shade and

texture as per reference drawing. 3) Modesty Panel at Front:

mm thick BWR ply confirming to IS 303 shall be fixed along the

length of table and finished with 1 mm thick laminate of approved

make, shade and texture as per reference drawing inclusive of

keepings grooves and pattern as per the drawing. 4) Lipping:

mm thick lipping of ghana teak wood shall be applied on all

exposed edges of veneer and ply as per reference drawing. 5)

Polish: Monocoat polish shall be done on all exposed faces of

wood and veneer. 6) 0.8 mm thick balancing laminate of

approved make, shade and finish to be applied on all inner

faces of top, bottom, sides, shutters, drawers, shelves and

partitions as per the instruction of Architect 7) Table under storage

size 700 x 450 x 500, ( 2 drower & 1 shutter/ 3 drower) as per

instruction of Architect. The work shall be done as per the

approved shop drawing (to be prepared by contractor),

specifications, sample approved and as directed by the Architect

and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools &

tackles,adhesives, consumable hardwares & required

SS 304 grade hardware/accessories of approved make (if

applicable) for all floors, all heights, all levels and all places

within campus. Contractor shall do all the needful and shall

Description Of Item Quantity Rate Unit Amount

Work Desk: 2 Providing, making, polishing and fixing table of

size 1800 x 750 x750 mm as per reference drawing. Material of

Construction: 1) Table Top: 25 mm thick laminated table top

comprising of solid box prepared by 19 mm thick BWR ply. The

top shall be finished with 1 mm thick laminate sheet of

approved shade, finish and make. Ply shall confirm to IS 303. The

table top sides of 25 mm thickness shall be finished with 0.8 mm

thick teak wood beading. 2) Table Legs: The table legs shall be

made by 25 mm thick BWR ply confirming to IS 303 to be

finished with 1 mm thick laminate of approved make, shade and

texture as per reference drawing. 3) Modesty Panel at Front:

mm thick BWR ply confirming to IS 303 shall be fixed along the

length of table and finished with 1 mm thick laminate of approved

make, shade and texture as per reference drawing inclusive of

keepings grooves and pattern as per the drawing. 4) Lipping:

mm thick lipping of ghana teak wood shall be applied on all

exposed edges of veneer and ply as per reference drawing. 5)

Polish: Monocoat polish shall be done on all exposed faces of

wood and veneer. 6) 0.8 mm thick balancing laminate of

approved make, shade and finish to be applied on all inner

faces of top, bottom, sides, shutters, drawers, shelves and

partitions as per the instruction of Architect 7) Table under storage

size 700 x 450 x 500, ( 2 drower & 1 shutter/ 3 drower) as per

instruction of Architect. The work shall be done as per the

approved shop drawing (to be prepared by contractor),

specifications, sample approved and as directed by the Architect

and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools &

tackles,adhesives, consumable hardwares & required

SS 304 grade hardware/accessories of approved make (if

applicable) for all floors, all heights, all levels and all places

within campus. Contractor shall do all the needful and

Description Of Item Quantity Rate Unit Amount

Work Desk: 1 Providing, making, polishing and fixing table of

size 2100 x 750 x 750 mm as per reference drawing. Material of

Construction: 1) Table Top: 25 mm thick laminated table top

comprising of solid box prepared by 19 mm thick BWR ply. The

top shall be finished with 1 mm thick laminate sheet of

approved shade, finish and make. Ply shall confirm to IS 303. The

table top sides of 25 mm thickness shall be finished with 0.8 mm

thick teak wood beading. 2) Table Legs: The table legs shall be

made by 25 mm thick BWR ply confirming to IS 303 to be

finished with 1 mm thick laminate of approved make, shade and

texture as per reference drawing. 3) Modesty Panel at Front:

mm thick BWR ply confirming to IS 303 shall be fixed along the

length of table and finished with 1 mm thick laminate of approved

make, shade and texture as per reference drawing inclusive of

keepings grooves and pattern as per the drawing. 4) Lipping:

mm thick lipping of ghana teak wood shall be applied on all

exposed edges of veneer and ply as per reference drawing. 5)

Polish: Monocoat polish shall be done on all exposed faces of

wood and veneer. 6) 0.8 mm thick balancing laminate of

approved make, shade and finish to be applied on all inner

faces of top, bottom, sides, shutters, drawers, shelves and

partitions as per the instruction of Architect 7) Table under storage

size 700 x 450 x 500, ( 2 drower & 1 shutter/ 3 drower) as per

instruction of Architect. The work shall be done as per the

approved shop drawing (to be prepared by contractor),

specifications, sample approved and as directed by the Architect

and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools &

tackles,adhesives, consumable hardwares & required

SS 304 grade hardware/accessories of approved make (if

applicable) for all floors, all heights, all levels and all places

within campus. Contractor shall do all the needful and shall

Description Of Item Quantity Rate Unit Amount

Table -: 3000x1000x750 Providing, making, polishing and fixing

table of size 3000 x 1000 x 750 mm as per reference drawing.

Material of Construction: 1) Table Top: 50 mm thick corian table

top comprising of hollow box prepared by 19 mm thick BWR

ply. The top shall be finished with 6 mm thick corian sheet of

approved shade, finish and make. Ply shall confirm to IS 303. The

table top sides of 50 mm thickness shall be finished with 6 mm

thick corian finished. 2) Table Legs: The table legs shall be made

by 19 mm thick BWR ply confirming to IS 303 to be finished with

6 mm thick corian of approved make, shade and as per

reference drawing. 3) Modesty Panel at Front: 19 mm thick

BWR ply confirming to IS 303 shall be fixed along the length of

table and finished with 4mm veniar of approved make, shade and

as per reference drawing inclusive of keepings grooves and pattern

as per the drawing. 4) Lipping: 6 mm thick lipping of ghana

teak wood shall be applied on all exposed edges of veneer and

ply as per reference drawing. 5) Polish: Monocoat polish shall be

done on all exposed faces of wood and veneer. 6) 1 mm thick

balancing laminate of approved make, shade and finish to be

applied on all inner faces of top, bottom, sides, shutters, drawers,

shelves and partitions as per the instruction of Architect. The

work shall be done as per the approved shop drawing (to be

prepared by contractor), specifications, sample approved and

as directed by the Architect and Engineer-in-charge. The rate

shall be for complete item inclusive of all material, labour,

wastages, necessary tools & tackles,adhesives, consumable

hardwares & required SS 304 grade hardware/accessories of

approved make (if applicable) for all floors, all heights, all levels

and all places within campus. Contractor shall do all the needful

and shall fulfill Architect''s design intent. No additional

claims will be entertained for this. The unit shall be

manufactured in parts and these parts shall be assembled at site.

Side Table with Storage: Providing, making, polishing and fixing

Side Table of size 1200 mm x 450 mm x 690 mm as per reference

drawing. Material of Construction:1) Base: Side table base

shall be prepared by making 19mm thick ply as per reference

drawing. 2) Table Top: 38 mm thick laminated table top

comprising of 19 mm thick BWR ply + 19 mm thick BWR

ply + 1 mm thick laminate sheet of approved shade, finish and

make. Ply shall confirm to IS 303. The table top sides of 38 mm

thick shall be finished with 1 mm thick laminate of approved

make, shade and finish. 3) Table Bottom, sides & Back: The

members shall be made from 19 mm thick BWR ply. 4) Drawer:

Drawer Bottom shall be made from 6 mm thick ply, and drawer

sides, back & front panel shall be made from 19 mm thick ply.

The front panel shall be provided with profile handles. Each

Drawer shall be provided with telescopic channels of size

mm of approved make. 5) Laminate: 1 mm thick laminate of

approved make, shade, texture and finish shall be applied as

per reference drawing. 0.8 mm thick balancing laminate of

approved make, shade and finish shall be applied on all inner

faces as of table tops, bottoms, sides, drawers, partitions and

shelves etc. 6) Lipping: 6 mm thick lipping of ghana teak wood

shall be applied on all exposed edges of wood, veneer and

ply, all wood surfec finish monocot polish as per reference

Description Of Item Quantity Rate Unit Amount

Providing and Supplying in Wooden chair with leather/similar

finish seat position bought out/ Loose furniture as sample

approved by EIC/Architect as per below specifications. legs

should be seasoned whiteash with open grain clear monocoat or

similar finish. Seat should be in 18/25mm ply with 40D pu form of

approved thickness coverd with approved shed of leatherite Entire

prodict sholud be in natural finishe and without any visible dent or

60 major knowts and without any visible powder finish .The work 10.00 12942.98 NOS

shall be measured and paid in Nos. The rates shall be inclusive of

linsead oil / lacquer finish polishing, plywood, veneer, fabric, MS

and all material, labour, wastages, taxes, transportation, loading,

unloading, fixing in position including protecting the same

against any dents and skretched etc. at all heights, all floors, all

levels complete to the satisfaction of the Architect and EIC.Chair -

Providing and Supplying in TWO Seater Squre Table Wooden top

with bought out/ Loose furniture as sample approved by

EIC/Architect as per below specifications. 800 x 800 legs should

be seasoned whiteash with open grain clear monocoat or similar

finish. Top should be in 18/25mm ply with 35mm thick chempher

adge complited in white ash wood /veneer finish with open grain

clear monocoat finished entire product should be in natural

finished and without any visibal dent or major knowts and without

any visible powder finish .The work shall be measured and paid

in Nos. The rates shall be inclusive of linsead oil / lacquer finish

polishing, plywood, veneer, fabric, MS and all material, labour,

wastages, taxes, transportation, loading, unloading, fixing in

position including protecting the same against any dents and

skretched etc. at all heights, all floors, all levels complete to the

satisfaction of the Architect and EIC. CAFETERIAN

PORTAONSquare Table :800 x 800 - :

Providing and Supplying in Four Seater Round Table Wooden top

with bought out/ Loose furniture as sample approved by

EIC/Architect as per below specifications. 1050mm round (42")

legs should be seasoned whiteash with open grain clear monocoat

or similar finish. Top should be in 18/25mm ply with 35mm thick

chempher adge complited in white ash wood /veneer finish with

open grain clear monocoat finished entire product should be in

natural finished and without any visibal dent or major knowts and

without any visible powder finish .The work shall be measured

and paid in Nos. The rates shall be inclusive of linsead oil /

lacquer finish polishing, plywood, veneer, fabric, MS and all

material, labour, wastages, taxes, transportation, loading,

unloading, fixing in position including protecting the same

against any dents and skretched etc. at all heights, all floors, all

levels complete to the satisfaction of the Architect and EIC.Round

Table :1050mm round (42") - :

Description Of Item Quantity Rate Unit Amount

Providing and Supplying in Four Seater Squrer Table Wooden top

with bought out/ Loose furniture as sample approved by

EIC/Architect as per below specifications. 1500 x 900mm legs

should be seasoned whiteash with open grain clear monocoat or

similar finish. Top should be in 18/25mm ply with 35mm thick

chempher adge complited in white ash wood /veneer finish with

open grain clear monocoat finished entire product should be in

natural finished and without any visibal dent or major knowts and

without any visible powder finish .The work shall be measured

and paid in Nos. The rates shall be inclusive of linsead oil /

lacquer finish polishing, plywood, veneer, fabric, MS and all

material, labour, wastages, taxes, transportation, loading,

unloading, fixing in position including protecting the same

against any dents and skretched etc. at all heights, all floors, all

levels complete to the satisfaction of the Architect and EIC.Squre

Table :1500 x 900mm - :

Providing and Supplying in Six Seater Squrer Table Wooden top

with bought out/ Loose furniture as sample approved by

EIC/Architect as per below specifications. 1800 x 900mm legs

should be seasoned whiteash with open grain clear monocoat or

similar finish. Top should be in 18/25mm ply with 35mm thick

chempher adge complited in white ash wood /veneer finish with

open grain clear monocoat finished entire product should be in

natural finished and without any visibal dent or major knowts and

without any visible powder finish .The work shall be measured

and paid in Nos. The rates shall be inclusive of linsead oil /

lacquer finish polishing, plywood, veneer, fabric, MS and all

material, labour, wastages, taxes, transportation, loading,

unloading, fixing in position including protecting the same

against any dents and skretched etc. at all heights, all floors, all

levels complete to the satisfaction of the Architect and EIC.Squre

Table :1800 x 900mm - :

Providing and Fixing 12mm thick Hilux Board for Ceiling using

Gypsum for section & Bottom Patti & L Support framing with

mm thick Hilux Board fixing exposed surface shall be clading

with framing of all fixing in side required and to be fixed properly

.All exposed side to be finishe net patti with Gypsum powder all

fixing in side required as approved by Architech including all

accessories, material & labour complete as directed by Engineer

incharge. complete as per details

Providung & Fixing frosted pvc glass film of required cut and

size of 0.5 thick as sample approved by EIC/Architect as per

below specifications. The work shall be measured and paid in

Providung & Fixing 12mmthick Qubi make wall partion on Toilet

67 Block at Terrace level with nesessary Hardware etc..complited 78.00 7976.17 Smt

shed approved by EIC/Architech

Providing & Fixing Decorative Storege 18mm thick BWP

plywood with 12mm thick plywood & 4 mm thick naturchal

venear with shuter and Drawer fixing and Mono coat P.U.

polishing etc. & fixing exposed surfaces shall be clading with

framing of all fixing in side required and to be fixed properly. All

exposed sides to be finish etc. Complete as directed by eng.

Description Of Item Quantity Rate Unit Amount

Wall hung type W.C.: Providing & fixing wash down water closet

(EWC Wall Hung Extended 655 x 365 x 755 mm Cera CAT No.

S1031103) with integral P or S trap including jointing the trap

with soil pipe in CM 1 :1 (1 Cement : 1 fine sand )

69 including Flash Tank (Cera CAT No. S1060101) with Flush 35.00 22945.20 Nos.

Fitting (Cera CAT No. B1810102),seat cover , chair bracket, Two

Way Bib Cock and Health Faucet etc. as sample approved by

EIC/Architect as per below specifications. The work shall be

measured and paid in Nos.

Wash Basin (Table Top): Providing & fixing vitreous china flat

table top washbasin 550mm X 400mm size (Cera CAT No.

S2020102) including PVC pipe connection with bottle trap,waste

couplin 40mm,fisher union, etc. complete. etc. as sample

approved by EIC/Architect as per below specifications. The work

shall be measured and paid in Nos.

Urinal: Providing & fixing flat back urinal 265 x 335 x x695 mm

size (Cera CAT No. S4020103SN) of approved quality including

connecting trap and with integral longitudinal flush pipe with push

71 cock (Jaquar CAT No. PRS 077) 12 mm dia brass screw 35.00 12562.40 Nos.

complete. etc. as sample approved by EIC/Architect as

per below specifications. The work shall be measured and paid in

Bib Cock: Providing & fixing 15mm dia screw down brass

chromium plated bib tap (Jaquar CAT No. SOT-83037) of

72 approved quality etc. complete. etc. as sample approved by 100.00 2460.36 Nos.

EIC/Architect as per below specifications. The work shall be

measuredand paid in Nos.

Angel Cock: Providing & fixing 15mm dia screw down brass

chromium plated angle tap (Jaquar CAT No. AQT-3057) of

73 approved quality etc. complete. etc. as sample approved by 100.00 1053.43 Nos.

EIC/Architect as per below specifications. The work shall be

measured and paid in Nos.

Providing and fixing to wall, ceiling & floor U.P.V.C (SCH

74 40) of the following Outside dia. Tube fitting and clamps, and 280.00 148.12 Rmt

testing including making good wall andfloor etc. (A) 40mm Dia.

Providing and fixing to wall, ceiling & floor U.P.V.C (SCH

75 40) of the followingOutside dia. Tube fitting and clamps, and 550.00 91.84 Rmt

testing including making good wall and floor etc. (B) 25mm Dia.

Providing and fixing to wall, ceiling & floor U.P.V.C (SCH

76 40) of the following Outside dia. Tube fitting and clamps, and 250.00 72.65 Rmt

testing including making good wall andfloor etc. (C) 15mm Dia.

proividing & fixing stone wear gully trap with C.I grating brick

masonary chamber and water tight C.I cover with frame of 300mm

X 300mm size with standard weight(i) square mouth traps 150m x

100 mm size p or R type etc complete.

Providing & fixing PVC SWR nanhi trap IS 14735 for drain -

75mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing, erecting and fixing double coated syntex PVC

79 (ISI) water tank of required capacity each with all necessary 20000.00 3.95 LTR

fittings and connection etc. complete onterrace.

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

80 complete with special flange compression type fitting,wall clips 400.00 580.75 Rmt

etc. including making good the wall ceiling and floor.(G) 160 mm

Description Of Item Quantity Rate Unit Amount

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

81 complete with special flange compression type fitting,wall clips 600.00 275.73 Rmt

etc. including making good the wall ceiling and floor.(G) 110 mm

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

PVC pipes of the following out side dia. Special density complete

with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(F) 75 mm dia

Supplying and erecting ISI marked sluice valve at position with

83 necessary materialfor following size of pipe diameter. (E ) 65mm 10.00 3482.20 Nos.

RCC GSR ( description of item for turnkey tender)Preparing

structural design of RCC Under Ground / Partially under ground /

above high ground level Reservoir of required capacity as per

relevant I.S.s and constructing the same, including excavation in

all types of soil strata (including rock) including shoring strutting

if required, for loose soil / to protect from collapse due to near by

traffic load, casting 100 mm thick P.C.C. leveling course in M-10,

Refilling the pit with proper soil and disposing of the surplus stuff

within a lead of 50 meters. Including cement plaster in CM 1:2

with approved water proofing compound to inside water touching

surface to container. Including all types of labour and material

charges of lowering, laying, erecting / hosting and jointing of pipe

assembly to inlet, outlet overflow, washout and bye pass

arrangement as per hydraulic design. Providing and fixing

accessories like MS / GI Ladder, CI Manhole frame and cover,

water level indicator, adequate cowl type ventilators or lantern

type ventilator with stainless steel jail.B.B. Masonry chambers for

valves. Providing and applying three coats of cement paint /

snowcem to the out side face of structure. It also includes

satisfactory water tightness test as per relevant I.S. code and

painting name of scheme and capacity on the tank as per direction

of engineer in charge. List of Indian Standards for Design of GSR

/ SUMP:-The structural design of GSR shall be in accordance with

provisions relevant I.Ss. (1) I.S. 3370 part I & II 2009 or latest

revised (1.1) I.S. 3370 part III & IV 1965 or latest revised (2) I.S.

456– 2000 or latest revised. (3) I.S. 1893 – 2000 – 1984 or latest

revised.(4) I.S. 875, Part – 1 to 3, 1987 or latest revised. General

Specifications:-(1) Water depth in container shall be adopted as

per data of tender. If water depth is not specified the suitable water

depth/ acceptable to field engineer in accordance with hydraulic

requirement shall be adopted for capacity. (2) Shape of container

(in plan) specified by in data shall be adopted in absence circular

Center Table:1050x750x 400 mm Providing fixing center table

35 mm thick top comprising from quartz/Glass/Vinear with IS

303 BWR ply structure and vertical support comprising of SS

or MS with finish as per shape and size mention in drawing.

including all type of hardware, fittings, fixtures , tools

tackles , etc complete as per attached ref image and drawing. The

work shall be done as per the specifications, sample approved

and as directed by the Architect and Engineer-in- charge

Description Of Item Quantity Rate Unit Amount

Providing and fixing flush door both sides laminated and I.T.W.

beading all around, shutter fabricated from 35 mm thick solid

core malemine faced three layered pre laminated flat pressed

wood based exterior grade bonded BWP/BWR synthetic resin

having stamped IS 12823 grade I type II including three coats of

86 lacquer polishing to exposed wooden surfaces and Stainless 48.51 9696.00 Smt

steel decorative type designs fixtures / fastening D type Handle,

surface mounted door closure, dead lock without mortise, 2Nos.

Aldrops, towerbolt, hinges etc.including I.T.W. triangular batten

patti of size 30m.m.x30m.m.etc. as per architectural detailed

drawing and as directed by engineer in charge.

Compactor storage : Single face unit Providing and fixing of

Compactor unit Balas or equivalent make as per approved

sample. Size: 340 mm Depth Shelves & Compartments as per

drawing Capacity 60Kgs. UDL /Compartment. Each Mobile

Unit will have Mechanical arrangement Each Component of

the System will be treated with rust preventve treatment and

will be powder coated as per approved sample. Rate shall

inclusive of mock up sample, all materials, loading, unloading,

transportation, placing at all floors and for all leads, all accessories

as described in item description,The work shall be measured and

paid in Smt, Work complete as per the detailed drawing , mockup

sample and instruction of Architect/Client.

Compactor : Floor rail Providing and fixing of Floor rail

equivalent make as per approved sample. Optimiser Drive

type-Sew Track (Code: TR) (Floor Rail) Rate shall inclusive of

88 mock up sample, all materials, loading, unloading, transportation, 75.30 1371.01 Smt

placing at all floors and for all leads, all accessories as described

in item description. Work complete as per the detailed drawing

, mockup sample and instruction of Architect/Client.

Providing and fixing Dorma toughened glass doors (10mm thick)

of size upto1.2 m width and 2.4 m height with fittings and

necessary hardware such as approved quality dorma door hinges,

door closer, mortise lock wth pin-cylinder and handle including

89 labour etc complete as per sample approved by Architect 103.70 12120.00 Smt

and/or Engineer-in-charge. The rate shall be for a complete item

including all necessary tools, tackles, hardware, material labour

etc. all complete including for fixing at all heights, all floors and

all levels.

Description Of Item Quantity Rate Unit Amount

Providing and fixing eco-friendly light weight calcium silicate

false ceiling tiles having Tegular edge & 15 mmThick Densified

edges on the Tile Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation. The Light weight calcium Silicate tile shall be

of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal

level suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced at joints

to get required length and size of 24X38mm made from 0.30 mm

thick (minimum) sheet, 1200mm centre to centre, and cross

‘T’ of size 24X28mm made out of 0.33mm(Minimum) sheet

spaced 1200mmalong spaced between main ‘T’ at 600mm

centre to centre to form agrid of 1200X600mm and secondary

cross ’T’ of length 600mm and size 24x28mm made of

0.30 mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on

periphery walls/partitions on a perimeter wall angle pre-coated

steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with

25mm long dry wall screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/Cosmos/Spintone) in the grid

including, cutting /making opening for services like diffusers,

grills, light fittings, fixtures, smoke detectors etc., wherever

required, Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling

with 12.5mm dia and 50mmlong dash fasteners, 4mmG.I.

Providing and fixing Dorma toughened glass partition (10mm

thick) with requisite Dorma patch fittings and necessary hardware

etc complete as per sample approved by Architect and/or Engineer-

91 in-charge. The rate shall be for a complete item including all 300.00 7575.00 Smt

necessary tools, tackles, hardware, material labour etc. all

complete including for fixing at all heights, all floors and all

Roller Curtain: Providing and fixing roller mounted curtains of

approved make and shade as directed by the Architect/EIC. Rate to

be inclusive of requisite mechanism and chain sprocket locking

arrangement for the blinds per one blind. The rate shall be

applicable for all floors and for all heights. Size of blinds shall not

exceed 1.80m along width of the opening.

Clear Float Glass: Providing and fixing clear float glass of

specified thickness in frame work, shelves with necessary cutting

of glass as per drawing & specifications including providing and

fixing EPDM quality rubber for aluminum sections / filling

transparent neutral cure glazed & metal silicon sealant of approved

make on the periphery of the glass & wood etc. complete at all

floors, all levels, all hights and in all shapes as per the directions

of Architect/Engineer-in-charge. Rate shall be inclusive of glass

finshing,consumable hardware, tools, tackles etc. Actual installed

area of glass shall be measured and paid in sqm. a) 6 mm thick

Description Of Item Quantity Rate Unit Amount

Providing and fixing flush door both sides laminated and I.T.W.

beading all around, shutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat pressed wood

based exterior grade bonded BWP/BWR synthetic resin having

stamped IS 12823 grade I type II including three coats of lacquer

94 polishing to exposed wooden surfaces and Stainless steel 150.00 8080.00 Smt

decorative type designs fixtures / fastening D type Handle, surface

mounted door closure, dead lock without mortise, 2Nos. Aldrops,

towerbolt, hinges etc.including I.T.W. triangular batten patti of

size 30m.m.x30m.m.etc. as per architectural detailed drawing and

as directed by engineer in charge.

Providing and fixing clear float Toughened glass of specified

thickness in frame work with necessary cutting of glass as per

drawing & specifications including providing and fixing EPDM

quality rubber / silicon sealant on the periphery of the glass as per

the required thickness etc. complete at all floors, all levels, all

hights and in all shapes as per the directions of Architect/Engineer-

in-charge. Actual installed quantity shall be measured and paid. a)

Veneer: Providing and fixing 4 mm thick Veneer (0.6 MM Core

layer on gurjen ply base) of approved make and shade including

for pelmets, raceways, ply false ceilings, wall cladding, wall

paneling etc, on with necessary nails, screws, adhesives, 6mm

thick best quality ghana teak lipping patti as per drawings and

straight lined, light colored from matching group. The rate shall be

for all heights, all floors, all places, etc. This item shall not be

measured and paid only for items where in the rates of providing

veneer is not included in the item description.

Monocoat Polish: Providing and applying monocoat polish for

internal wooden & veneered surfaces including surface

preparation, applying filler / hardener / putty, sanding, cleaning of

furniture after completion of job etc. to the satisfaction of

97 architects / EIC. (Mode of measurements :Only the polished area 400.00 1818.00 Smt

shall be measured & paid for the items in which polishing is not

inclusive in item description)work shall be carried out as per the

manufacture''s specification & sample approved. The final coat

should be sprayed by gun with pressure as per requirement.

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with

98 cutting, welding, grinding & finishing duly painted with one coat 500.00 90.90 Kg.

of red oxide with erection on site as per direction of engineer in

charge with necessary grouting, cementing, plastering & finishing

Description Of Item Quantity Rate Unit Amount

Full Height Storage: Providing, making, polishing and fixing full-

height storage of size 450 mm depth as per reference drawing.

Material of Construction: 1) Top: 19 mm thick BWR ply finished

with 1 mm thick laminate sheet of approved shade, finish and

make. Ply shall confirm to IS 303. 2) Storage Base: The table legs

shall be made by 19 mm thick BWR ply confirming to IS 303 to be

finished with 1 mm thick laminate of approved make, shade and

texture as per reference drawing.3) Sides: The sides shall be made

by 19 mm thick BWR ply confirming to IS 303 to be finished with

1 mm thick laminate of approved make, shade and texture as per

reference drawing.4) Partitions: Horizontal and vertical partition

shall be made of 19 mm thick BWR ply and shall be finished with

0.8 mm thick laminate of approved make, shade and finish.5)

Lipping: 6 mm thick lipping of ghana teak wood shall be applied

on all exposed edges of veneer and ply as per reference drawing.

6) Polish: Monocoat polish shall be done on all exposed faces of

wood and veneer.8) 0.8 mm thick balancing laminate of approved

make, shade and finish to be applied on all inner faces of top,

bottom, sides, shutters, drawers, shelves and partitions as per the

instruction of Architect.9) Hardware: Hinges: L Hinges of size

mm x 18 mm shall be used in requisite quantity as approved by the

engineer-in-charge; Magnet Lock: 2 Nos. per active shutter;

Shutter stop chain: 1 no. per shutter; Handles: G - profile handles

of approved. The work shall be done as per the approved shop

drawing (to be prepared by contractor), specifications, sample

approved and as directed by the Architect and Engineer-in-charge.

The rate shall be for complete item inclusive of all material,

labour, wastages, necessary tools & tackles,adhesives, consumable

hardwares & required SS 304 grade hardware/accessories of

approved make (if applicable) for all floors, all heights, all levels

and all places within campus. Contractor shall do all the needful

and shall fulfill Architect''s design intent. No additional claims will

Modular Tables: (Non-sharing partition) Providing and fixing

modular table with under storgae of size 1500 mm x 600 mm x

760 mm as per reference drawing provided by the architect.

Material of Construction: 1) Table Top: 25 mm thick laminated

finish of approved make shade and texture table top with post

foam method. 2) The table peripheral aluminum frame shall be of

65 mm thick finished with powder coating of 50-55 micron. 3)

Under table unit shall be comprising of 1 drawer unit The drawer

shall be provided with telescopic channels. The work shall be

done as per the approved shop drawing (to be prepared by

contractor), specifications, sample approved and as directed by the

Architect and Engineer-in-charge. The rate shall be for complete

item inclusive of all material, labour, wastages, necessary tools &

tackles,adhesives, consumable hardwares & required SS 304 grade

hardware/accessories of approved make (if applicable) for all

floors, all heights, all levels and all places within campus.

Contractor shall do all the needful and shall fulfill Architect''s

design intent. No additional claims will be entertained for this.

Description Of Item Quantity Rate Unit Amount

Modular Tables: (Sharing partition) Providing and fixing modular

table with under storgae of size 1500 mm x 600 mm x 760 mm as

per reference drawing provided by the architect. Material of

Construction: 1) Table Top: 25 mm thick laminated finish of

approved make shade and texture table top with post foam

method. 2) The table peripheral aluminum frame shall be of

mm thick finished with powder coating of 50-55 micron. 3) Under

table unit shall be comprising of 1 drawer unit The drawer shall be

provided with telescopic channels. The work shall be done as per

the approved shop drawing (to be prepared by contractor),

specifications, sample approved and as directed by the Architect

and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools &

tackles,adhesives, consumable hardwares & required SS 304 grade

hardware/accessories of approved make (if applicable) for all

floors, all heights, all levels and all places within campus.

Contractor shall do all the needful and shall fulfill Architect''s

design intent. No additional claims will be entertained for this.

Side Table with Storage: Providing, making, polishing and fixing

Side Table of size 900 mm x 450 mm x 690 mm as per reference

drawing. Material of Construction: 1) Base: Side table base shall

be prepared by making 19mm thick ply as per reference drawing.

2) Table Top: 38 mm thick laminated table top comprising of

mm thick BWR ply + 19 mm thick BWR ply + 1 mm thick

laminate sheet of approved shade, finish and make. Ply shall

confirm to IS 303. The table top sides of 38 mm thick shall be

finished with 1 mm thick laminate of approved make, shade and

finish. 3) Table Bottom, sides & Back: The members shall be

made from 19 mm thick BWR ply. 4) Drawer: Drawer Bottom

102 shall be made from 6 mm thick ply, and drawer sides, back & front 4.00 14645.00 Nos.

panel shall be made from 19 mm thick ply. The front panel shall

be provided with profile handles. Each Drawer shall be provided

with telescopic channels of size 400 mm of approved make. 5)

Laminate: 1 mm thick laminate of approved make, shade, texture

and finish shall be applied as per reference drawing. 0.8 mm thick

balancing laminate of approved make, shade and finish shall be

applied on all inner faces as of table tops, bottoms, sides, drawers,

partitions and shelves etc. 6) Lipping: 6 mm thick lipping of ghana

teak wood shall be applied on all exposed edges of wood, veneer

and ply, all wood surfec finish monocot polish as per reference

Description Of Item Quantity Rate Unit Amount

Low Height Storage: Providing, making, polishing and fixing low-

height storage of size 450 mm depth & up to 750 mm height as per

reference drawing. Material of Construction: 1) Storage Top:

mm thick laminated table top comprising of hollow box prepared

by 19 mm thick BWR ply. The top shall be finished with 1 mm

thick laminate sheet of approved shade, finish and make. Ply shall

confirm to IS 303. The table top sides of 38 mm thickness shall be

finished with 0.8 mm thick teak wood beading.2) Storage Base:

The base shall be made by 19 mm thick BWR ply confirming to IS

303 to be finished with 1 mm thick laminate of approved make,

shade and texture as per reference drawing.3) Sides: The sides

shall be made by 19 mm thick BWR ply confirming to IS 303 to be

finished with 1 mm thick laminate of approved make, shade and

texture as per reference drawing.4) Partitions: Horizontal and

vertical partition shall be made of 19 mm thick BWR ply and shall

be finished with 0.8 mm thick laminate of approved make, shade

and finish.5) Lipping: 6 mm thick lipping of ghana teak wood

shall be applied on all exposed edges of veneer and ply as per

reference drawing. 6) Polish: Monocoat polish shall be done on all

exposed faces of wood and veneer.8) 0.8 mm thick balancing

laminate of approved make, shade and finish to be applied on all

inner faces of top, bottom, sides, shutters, drawers, shelves and

partitions as per the instruction of Architect.9) Hardware: Hinges:

L Hinges of size 75 mm x 18 mm shall be used in requisite

quantity as approved by the engineer-in-charge; Magnet Lock:

Nos. per active shutter; Shutter stop chain: 1 no. per shutter;

Handles: G - profile handles of approved sample; Telescopic

channel: 2 per drawer The work shall be done as per the approved

shop drawing (to be prepared by contractor), specifications,

sample approved and as directed by the Architect and Engineer-in-

charge. The rate shall be for complete item inclusive of all

material, labour, wastages, necessary tools & tackles,adhesives,

Staging with V board with metal framing: The framework shall be

prepared from RHS metal section of size 50 mm x 25 mm x

mm fixed approximately at spacing not more than @ 450 mm c/c

both ways. At the joint of cladding material, two back to back

metal members of size as specified above shall be provided and

shall be supported by filling required size wedges / washers / MS

wall connectors or packings of washers to ensure right angles and

plumb level. The framing shall be fixed with the walls and/or

floors (for floors, the framing shall be fixed to the concrete surface

and not flooring mortar) by nylon grip screws of approved make

and sample. The frame work shall be measured in sqm of elevation

and/or floor area. The face of the panelling shall be finished with

18 mm thick Fiber cement board (V-board). Rates shall be

inclusive of cost of making cut outs / openings for electrical

fixtures, tube lights etc. & providing additional sections for

strengthening the openings / cut-outs, as per drawing or

instruction of EIC. Area of cut-outs shall not be deducted and no

extra payment shall be considered for additional sections provided.

PVC FLOORING - 3 MM Providing and laying PVC/Vinyl

flooring of 3 mm thickness, using Wonderfloor vinyl flooring,

Indag vinyl floor tiles, LG vinyl tiles, Classic vinyl flooring or

equivalent, as approved by the Architect, in desired pattern and

design, in required shade and finish, with proper rubber based

adhesive solution, such as Dunlop S-758 , pidilite SR or

equivalent. The rate includes making seamless joints and cleaning

the flooring etc. complete, as directed.

Description Of Item Quantity Rate Unit Amount

Chair Providing and Fixing in position bought out/ Loose furniture

as sample approved by EIC/Architect as per below specifications.

The work shall be measured and paid in Nos. The rates shall be

inclusive of linsead oil / lacquer finish polishing, plywood, veneer,

fabric, MS and all material, labour, wastages, taxes, transportation,

loading, unloading, fixing in position including protecting the

same against any dents and skretched etc. at all heights, all floors,

all levels complete to the satisfaction of the Architect and EIC.

Chair - 2: Godrej Kareena High back chair having synchronus

mechanism with multiposition locking, back updown for perfect

lumbar support, height adjustable arms for appropriate arm

support, seat depth adjustment with chrom finish arms and base.

Chair Providing and Fixing in position bought out/ Loose furniture

as sample approved by EIC/Architect as per below specifications.

The work shall be measured and paid in Nos. The rates shall be

inclusive of linsead oil / lacquer finish polishing, plywood, veneer,

fabric, MS and all material, labour, wastages, taxes, transportation,

loading, unloading, fixing in position including protecting the

same against any dents and skretched etc. at all heights, all floors,

all levels complete to the satisfaction of the Architect and EIC.

Chair - 2: Godrej Mars auditorium chair having Flexible sliding

seat, Retractable desklet, PU top arms, Aisle lighting, seat

numbering and provision for audio-video module integration or

equivalent

Providing and Fixing metal sign board1. Finish Brass / Golden

Colour 1.2mm thick Metal sheet2. Font Thickness 25mm. (

108 Vidhya Samisha Kendra).3. Font Height 14" to 18".all complete as 60.00 8720.94 Nos.

per detailed specifications and instructions of Engineer in charge.

Rate shall be paid for Font Nos.

PARTITION - 75 MM THICK:Providing and fixing Aluminium

framing of 50mm x 25 mm. The framework shall be fixed

approximately not more than @ 1200 mm x 600 mm c/c

vertically. At the joint of cladding material, two back to back

aluminium members of 50mm x 25mm size shall be provided and

shall be supported by filling required size wedges / washers / MS

wall connectors or packings of aluminium washers to ensure right

angles and plumb level. The framing shall be fixed with the walls

109 by nylon grip screws of approved make and sample. The frame 150.00 5455.49 Smt

work shall be measured in sqm of elevation area. The either face

of the partition shall be finished with 12 mm thick Exteriour Grade

MDF. Rates shall be inclusive of cost of making cut outs /

openings for electrical fixtures, tube lights etc. & providing

additional sections for strengthening the openings / cut-outs, as

per drawing or instruction of EIC. Area of cut-outs shall not be

deducted and no extra payment shall be considered for additional

sections provided.

Glass Railing: Providing and fixing Glass railing. 1) top road

Aluminium Square pipe 50*50mm.2)bottom rail 75mm Height.

With anodised Finish.3) glass 12mm clear toughen glass. all

hardware including railing price, make and height as specified

110 and as approved by EIC/ Architect. The rates shall be inclusive of 100.00 11648.52 Rmt

installation, material cost, labour, wastage, all tools tackles,

scaffoldings, hardware at all floors, The work shall be carried out

complete in accordance to the manufacturer's specifications and as

directed by Architect and/or EIC.

Description Of Item Quantity Rate Unit Amount

False Flooring: Providing and fixing faf 800 ibf access floor

panels having dimensions of 600*600mm shall be all steel welded

contraction with an enclosed bottom pan of 49 hemispherical

cones and 36 reverse cones. the top plain sheet is fuse welded to

the bottom pam at 117 locations to form a panel of an overall

thickness of 35mm. which included a 1mm thickness anti static

high pressure laminate ( hpl) on the top surface of the panel. the

111 12.5 mm flange on the perimeter is provided with gussets at the 85.00 7623.21 Smt

four corners to lend additional stiffness and stability to the panels.

all hardware including railing price, make and height as specified

and as approved by EIC/ Architect. The rates shall be inclusive of

installation, material cost, labour, wastage, all tools tackles,

scaffoldings, hardware at all floors, The work shall be carried out

complete in accordance to the manufacturer's specifications and as

directed by Architect and/or EIC.

WOODEN FLOORING - 8 to10 MM Providing and laying

Wooden flooring of 8 to 10 mm thickness, using Wonderfloor

Woodenl flooring, Indag Wooden floor tiles, Classic Wooden

flooring or equivalent, as approved by the Architect, in desired

pattern and design, in required shade and finish, with proper

rubber based adhesive or equivalent. The rate includes making

seamless joints and cleaning the flooring etc. complete, as

WOODEN SKIRTING - 8 to10 MM Providing and laying

Wooden skirting riser, reducer of 8 to 10 mm thickness, using

Wonderfloor Wooden Skirting, Indag Wooden floor tiles, Classic

Wooden skirting or equivalent, as approved by the Architect, in

desired pattern and design, in required shade and finish, with

proper rubber based adhesive or equivalent. The rate includes

making seamless joints and cleaning the flooring etc. complete, as

wooden podium:Providing, making, polishing and fixing Podium

of size 1200*600*450 mm as per reference drawing.Material of

Construction:1) Top: 19 mm thick veneer finish top prepared by

19 mm thick BWR ply. The top shall be finished with 4 mm thick

sheet of approved shade, finish and make. Ply shall confirm to IS

303. The table top sides of 19 mm thickness shall be finished with

0.8 mm thick teak wood beading.2) Table Legs: The table legs

shall be made by 19 mm thick BWR ply confirming to IS 303 to be

finished with 4 mm thick veneer of approved make, shade as per

reference drawing. 3) Polish: Monocot polish shall be done on all

exposed faces of wood 4) 1 mm thick balancing laminate of

approved make, shade and finish to be applied on all inner faces of

114 top, bottom, sides, shutters, drawers, shelves and partitions as per 1.00 22659.48 Nos.

the instruction of Architect.The work shall be done as per the

approved shop drawing (to be prepared by contractor),

specifications, sample approved and as directed by the Architect

and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools &

tackles, adhesives, consumable hardware & required SS 304 grade

hardware/accessories of approved make (if applicable) for all

floors, all heights, all levels and all places within campus.

Contractor shall do all the needful and shall fulfil Architect's

design intent. No additional claims will be entertained for this.

The unit shall be manufactured in parts and these parts shall be

assembled at site.

Description Of Item Quantity Rate Unit Amount

Providing and fixing Dorma toughened glass partition (10mm

thick) with requisite Dorma patch fittings and necessary hardware

etc complete as per sample approved by Architect and/or

115 Engineer-in-charge. The rate shall be for a complete item 317.85 9090.00 Smt

including all necessary tools, tackles, hardware, material

labour etc. all complete including for fixing at all heights, all

floors and all levels.

Drilling of bore hole an Alluvial strata by Direct Rotary Ring size

200mm/250mmdia.

Reaming of 200mm / 250mm dia pile borehole including

117 assembling, lowering, housing, casing strainer pipe gravel 500.00 638.41 Mtr.

packing clay packing etc. complete size 550mmdia.

E.R.W. plain and medium duty pipe confirming to IS 1239 /

118 1964 with latest amendment in random length of 4 to 7mtr 340.00 3830.42 Mtr.

size 200mm dia (minimum 5.82 mmthickness)

Providing and fixing 8" Johnson screen LCG casing pipe A grade

119 having 1.5mm to2.0mm slot size with all required accessories etc. 160.00 5223.30 Mtr.

Clamps made from M.S. plate with 3 hole on either side

120 with nuts and bolts ofstandard make size 900mm x 100mm x 2.00 69643.94 Nos.

16mm suitable for 200mm dia pipe.

Bore plug having 100mm height made from M.S. plate with

holes at equal distance on circumferences for nut bolts type

121 locking arrangements with nut bolts and lock nuts of standard 2.00 34821.97 Nos.

make complete from 5mm thick M.S. plate (for top also

suitable200mm dia pipe.)

122 Supply of gravel having size 4mm to 6mm as directed on site. 52.00 6964.39 Cmt

Supplying submersible pump set for bore of 150 mm. dia. or more

having Single phase motor capacity not more than 1.5 H.P

discharge capacity having (a) (20 Stage) head 110 mtrs. suitable

for 32 mm dia.delivery pipe. Cat.II

Lowering of submersible motor pump set complete with required

nos. and size of casing pipes erected by means of proper chain

124 pulley block and pipe wrenches after checking of threads of each 1.00 11607.32 Nos.

pipe with coupling to take the load of the pump set and pipe

assembling filled up with water above 120 mtrs.

Supplying and erecting approved make motor control cubical

panel (star delta) made from 16 G. CRCA sheet duty epoxy

powder paint inside and outside with hinged doors and locking

with suitable size of ON-OFF isolator (AC 3/23 duty) main fuses.

Digital volt and current meter ( in a single unit) with micro

controller based control unit and current sensing single phasing

preventor overload protection, over voltage ( Programmable)

protection and under voltage (Programmable) protection, prod less

dry run protection programming facility for setting of all

parameter like overload current high voltage limit, low voltage

limit, dry run limit with digital indication on seven segment LED

display for any fault like overload, high voltage, low voltage, dry

running single crimped, electronic star delta timer feather touch

start / stop push buttons to be erected on angle iron frame. Grouted

on the wall (the contractors will be of L&T, Siemens, BCH make

only) (D) S/D upto 15 H.P.

Providing and erecting ISI marked PVC insulated shethed flat

126 flexible submersible copper cable approved make of following 900.00 290.19 Mtr.

size (F) 3 core x 4 sq. mm.

Heavy duty clamps made from 4" x 1.5" iron strip suitable for

column pipe 1.5" to2" length (E ) 65mm dia pipe.

Description Of Item Quantity Rate Unit Amount

Supplying and erecting funnel type earthing having earth

plate of following size buried in specifically prepared earth pit

3 mtr. Below ground with 40 kg charcoal and salt with alternate

layers of charcoal and salt 20mm dia GI pipe with funnel with

wire mesh for watering and brick masonry block CI cover

complete as per para 7.3 of IS 3043 with necessary length of

128 double GI / copper earth wire no. 6 SWG bolted with lug to plate 2.00 12768.06 Nos.

and covered in 12mm dia GI pipe 2.5 mtr long comp. connected to

the nearest switch gear with end socket as per erection and duly

tested by earth tester confirming to IS (as per drawing) with

following specification: (A) only pipe earthing without earth

plate and 4.5 mtr long 40 mm dia GI earth pipe (as per

drawing) (D) with 60 x 60 x 0.315 cms. copper earth plate

Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having

normal current rating up to 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections & complete erected in existing 16 G.M.S.

housing on angle frame. (Cat. III)

Supplying and erecting ISI approved make power capacitor

for 440 V 50 c/s perKVRA complete to be erected on angle

iron flange. (A) Metalised polypropylene dry type ( upto

KVAR) heavy duty.

Providing approved make Triple Pole Metal Clad Switch &

131 Fuse unit 415/500 Vwith HRC fuse of suitable load with neutral 2.00 4062.56 Nos.

link confirming to IS (b) 63 A Cat III

Supplying and erecting ISI marked sluice valve at position with

132 necessary materialfor following size of pipe diameter. (E ) 65mm 2.00 3482.20 Nos.

Supplying & erecting Mild Steel heavy duty Flanges with

133 rubber packing andhardware materials for pipe connections 8.00 4062.56 Nos.

suitable for (D) 200 mm

Supplying & erecting G.I. bend for pipe connection suitable for

Providing and supplying ISI make G.I. pipe with coupling of

following class ''B'' including all taxes insurance,

135 transporationm, freight charges, octroi, inspection charges, 450.00 116.07 Rmt

loading, unloading conveyance to departmental stores

stacking etc. complete 65mm dia. IS 1239 / 1990 65 mm dia.

Applying general insectiside pest control treatment to

floors,cupboards , etc including labours materials etc complete.

Suppliyingofgradedstoneaggregateoffollowingsizes(forW.B.M.Ro

ad)(2)Handbrokenstoneaggregate40mm to 63 mm size.

Providing and laying and fixing 50 mm thick expansion joint by

hydro cell semi rigid UV resistance with high performance

laminated closed cell polythene foam joint filler in sheet foam as

directed, etc. complete.

De-watering of tremix M250 floor concrete by means of vaccum

139 dewatering using floater machine and other necessary equipments 1200.00 223.42 Smt

and cmplete the work (ROAD)

Description Of Item Quantity Rate Unit Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected

on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(j) in existing pipe

erected concealed in wall/ceiling completeCat. III

Point wiring for Tissino / Modular secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with earth

continuity and necessary connection with primary light with

accessories erected on Metal / PVC / wooden box covered with

mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed

wiring. with necessary Lamp holder / ceiling rose / H.D.Connector

as directed.(j) in existing pipe erected concealed in wall/ceiling

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular type switches and

following type of accessories erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.(j) in existing pipe erected concealed

in wall/ceiling completeCat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and accessories

143 with earth continuity of following type erected on PVC / 160.00 518.13 Pt.

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(j) in existing pipe erected concealed in

wall/ceiling completeCat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.(I)[I] For 6A Plug and

a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board,(j) in existing pipe erected concealed in

wall/ceiling completeCat. III

Description Of Item Quantity Rate Unit Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.(II)[II] For 16A Plug

and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

board.(j) in existing pipe erected concealed in wall/ceiling

completeCat. III

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

146 single mounting base frame covered with textured / metallic/white 650.00 241.39 Pt.

front plate modules erected on / in wall / ceiling with following

type accessoriesCat. III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

147 covered with textured / metallic/white front plate , modules erected 350.00 24.24 Each

with necessary connections as per site situation directed by

Engineer In charge.(7) Blank Plate Single Cat.III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by

Engineer In charge.(9) 16 Amp. SP one way switch

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by

Engineer In charge.(10) 6/16Amp. Universal socket

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

150 mounting base frame covered with textured/metallic /white front 1.00 1081.71 Each

plate,modules erected with necessary connections as directed1 no.

6A/16A universal plug-switch combined.3 nos. 6A Switch3 nos.

6A 5 pin Plug For Modular Type Accessories ,Cat. III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

151 covered with textured / metallic/white front plate , modules erected 10.00 144.43 Each

with necessary connections as per site situation directed by

Engineer In charge.(11) 6 Amps. Bell Push,Cat.III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by

Engineer In charge.(3) Two Pin/RJ-11 Telephone Socket,[A] For

One Gang,Cat.III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

153 covered with textured / metallic/white front plate , modules erected 300.00 153.52 Each

with necessary connections as per site situation directed by

Engineer In charge.(8) Computer RJ-45 socket ,Cat.III

Description Of Item Quantity Rate Unit Amount

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

154 covered with textured / metallic/white front plate , modules erected 5.00 153.52 Each

with necessary connections as per site situation directed by

Engineer In charge.((4) TV Co-axial Socket outlet ,Cat.III

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

155 erected with necessary PVC fittings & Junction boxes fixed with 4500.00 32.32 Mtr.

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

156 erected with necessary PVC fittings & Junction boxes fixed with 3500.00 32.32 Mtr.

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

157 erected with necessary PVC fittings & Junction boxes fixed with 450.00 52.52 Mtr.

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (c) 32 mm

Providing & erecting PVC Corrugated Flexible Conduit with

158 required nos. of coupling, PVC bushes, Check-nuts etc. complete 120.00 20.20 Mtr.

of following sizes.(2) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with

159 required nos. of coupling, PVC bushes, Check-nuts etc. complete 80.00 26.26 Mtr.

of following sizes.(3) 32 mm

Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free

and flame proof confirming BS with necessary end caps Internal

and external bend, flat bends, coupler, tee etc..All necessary

accessories and measuring of following sizes(1) 75 mm x 50 mm

Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free

and flame proof confirming BS with necessary end caps Internal

and external bend, flat bends, coupler, tee etc..All necessary

accessories and measuring of following sizes(1) 75 mm x 50 mm

trunking (2) 100 mm x 50 mm trunking

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size,(e) in existing pipe,(a)

2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size,(e) in existing pipe,(b)

2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size,(e) in existing pipe,(a) 2 wire 4 sq.

Description Of Item Quantity Rate Unit Amount

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be

165 erected in / on wall / ceiling with 2.5 sq. mm copper conductor 220.00 116.15 Mtr.

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size,(e) in existing pipe(b) 2 wire 6 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be

166 erected in / on wall / ceiling with 2.5 sq. mm copper conductor 850.00 229.27 Mtr.

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size,(e) in existing pipe(h) 4 wire 6 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size,(e) in existing pipe,(i) 4 wire 10 sq.

mm(use earth wire of 4 sq.mm )

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

168 existing pipe of following size (Specifically for control panel, 60.00 26.26 Mtr.

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.(c) One

wire 2.50 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

169 existing pipe of following size (Specifically for control panel, 50.00 35.35 Mtr.

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.(d) One

wire 4.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

170 existing pipe of following size (Specifically for control panel, 45.00 53.53 Mtr.

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.(e) One

wire 6.00 sq. mm

Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(f) One wire 10.00 sq. mm

Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(g) One wire 16.00 sq. mm

Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(h) One wire 25.00 sq. mm

Description Of Item Quantity Rate Unit Amount

Supplying & erecting Delton or approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two pairs, &

wrapped with FRLS PVC tape & sheathed with FRLS PVC or

174 HFFR outer Jacket suitable for telephone wiring & confirming to 10.00 19.19 Mtr.

C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.[A] Conductor Size

mm ,(a) Unarmoured,2) Two Pairs

Supplying & erecting approved make LAN cable of following size

in existing pipe as per direction[C] CAT -

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

176 copper insulated with Foam PE & Secondary conductor made of 150.00 37.37 Mtr.

poly - Aluminium film bonded Al. Braids @ suitable coverage

overall sheathed with black PVC insulation.b).RG-6

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.(c) 1.00 Sq.mm 2 core round/ flat PVC

Supplying and erecting Flexible PVC insulated multistrand

multicore 1.1 kv grade ISI marked copper wires of following size

to be erected as directed.e) 1.50 Sq.mm 3 core round PVC

Supplying and erecting Flexible PVC insulated multistrand

multicore 1.1 kv grade ISI marked copper wires of following size

to be erected as directed.h) 2.50 Sq.mm 3 core round PVC

180 Decorative call bell Ting-tong box type 250 volts complete erected 10.00 68.68 Each

Providing and erecting Height adjustable junction box 65 - 90 mm

150 x 150 x 65 - 90 mm, or direct acess to cables at the

intersection of Raceways, make in Legrand cat no. 689610,as per

directed by Architech & Engineer In charge

Providing and erecting Height adjustable junction box 65 - 90 mm

225 x 225 x 65 - 90 mm, or direct acess to cables at the

intersection of Raceways, make in Legrand cat no. 689610.as per

directed by Architech & Engineer In charge

Providing and erecting Height adjustable junction box 65 - 90 mm

300 x 300 x 65 - 90 mm, or direct acess to cables at the

intersection of Raceways, make in Legrand cat no. 689610.as per

directed by Architech & Engineer In charge

Providing and erecting Height adjustable junction box 65 - 90 mm

400 x 400 x 65 - 90 mm, or direct acess to cables at the

intersection of Raceways, make in Legrand cat no. 689610.as per

directed by Architech & Engineer In charge

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for,(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI),(b) sheet

steel double door,(iii)8 way

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

186 IEC 61439-1 & 3 without MCB to house appropriate nos. of 6.00 3874.36 Each

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for,(A) single phase incoming and horizontal single

phase outgoing,(b) sheet steel double door (IP-43),(iv)12 way

Description Of Item Quantity Rate Unit Amount

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

187 IEC 61439-1 & 3 without MCB to house appropriate nos. of 3.00 1152.41 Each

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for,(A) single phase incoming and horizontal single

phase outgoing,(b) sheet steel double door (IP-43),(iii)8 way

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

188 IEC 61439-1 & 3 without MCB to house appropriate nos. of 1.00 885.77 Each

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for,(A) single phase incoming and horizontal single

phase outgoing,(b) sheet steel double door (IP-43),(ii)6 way

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

189 phase 240 V,50Hz. having characteristic of quick action & 4.00 1969.50 Each

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed, (i) 25 Amps.DP , Cat. III

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

190 phase 240 V,50Hz. having characteristic of quick action & 63.00 2235.13 Each

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed, (ii) 40Amps. DP , Cat. III

Providing and erecting four pole MCB isolator A.C. 22 duty

confirms to IS 13947-3 in existing box.(b) for 63 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(c)63 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS

: 8828 in existing box having following capacity ,(A) 6 to 32 Amp.

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.

Providing & erecting 415V MCB Four Pole Switch for Lighting

196 Load (B curve) having 10KA breaking capacity & confirms to IS 8.00 638.32 Each

:8828 in existing box having following capacity,(b)40 Amp.Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity,(B) 40 Amp. Cat.III

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming

to IS 8828/1996 with ISI Mark Cat.III

Description Of Item Quantity Rate Unit Amount

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary

IP-42 and above protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S. sheet for outer body

& doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal partitions

& cable alley as per requirements & instruction of engineer-in-

charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control

199 fuses/MCB for measuring instruments, earth bus & earth bolts, 6.00 14902.55 Smt

foundation flange - bolts-base Plates, sufficient nos. of hinged

doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size.((B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm depth

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S. angles, flats,

bars, channels, sections complete with cutting, welding, grinding

& finishing duly painted with one coat of red oxide with erection

on site as per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with necessary

connections.(A) Suitable for 100 Amp. Capacity

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with necessary

connections.(B) Suitable for 200 Amp. capacity

Supplying & erecting approved make Four Pole 415V change over

203 switch interior for panel mounting with operating mechanism 1.00 12241.20 Each

A.C.23 duty confirming to IS for ,(D)200A,Cat-lll

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only, Cat III

Description Of Item Quantity Rate Unit Amount

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal &

205 magnetic release suitable to work on A.C.supply 50 c/s. with all 4.00 8055.76 Each

internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having Normal current

rating up to 200A.with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal

connections & complete erected in existing

G.M.S.housing,ICS=100% of ICU only, Cat III

Approved make Earth fault Relay suitable to mount with inter

connection to moulded case circuit breaker having CT ratio &

207 MCCB rating as following along with shunt trip 220V AC. with 2.00 4983.34 Each

all internal connections & complete erected in existing

M.S.housing.,(2) 125 A -200 A , CT Ratio 1/200

Providing and erecting following additional parts for panel

mounting MCCBs (A)Extended operating rotary handle with pad

lock with three position trip,off,on suitable for 25A to 250 A panel

mounting cat-III

Supplying & erecting directly operated single phasing preventer

complete erected and connected to supply up to 45 Amp. Range.

Supplying & erecting approved make time switch with single pole

air break contacts suitable for 230 V.15/16A.complete with self

210 starting motor driven clock ‘ON’ &’ OFF’ automatic arrangement 2.00 2354.31 Each

at any predetermined time during each 24 hours,With nickel

cadmium rechargeable battery backup erected as directed.

Supplying & erecting approved make motor control cubical

panel (Direct - on - line) made from 16 G. CRCA sheet duly epoxy

powder painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps

for R- Y - B phases, overload relay, Automatic water level

switch incoming, wires duly socket crimped, main contactor &

overload relay, start - stop push buttons, to be erected on angle

iron frame grouted on wall as directed. The isolator, overload relay

& contactors will be of L & T, Siemens or BCH make only. (A)

DOL up to 5.0 H.P.

Supplying and erecting approved make panel mounting type

Digital Ammeter having 3 digits LED display, external CT

212 operated, calibrated for 0 to 1000 Amps suitable to operate on 500 4.00 1558.43 Each

Volt AC , erected on existing panel board with all connection,

wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type

Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts

range erected on existing panel board with all connection, wiring

etc .with manufacturers calibration certificate.

214 phase AC Supply 500 V on existing panel board with necessary 4.00 317.14 Each

connections.

Providing & erecting L.T. Current Transformer with bar primary

215 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box 12.00 274.72 Each

duly secured with insulating materials connected to the meter

Description Of Item Quantity Rate Unit Amount

Supplying and erecting approved make suitable panel indicator

216 LED type lamp, lens cover, complete erected with necessary 24.00 43.43 Each

connections.

Providing and erecting AC-3 duty 3 pole power contactor with

NO & 2 NC aux contacts complete with 415V/220V operating coil

suitable for (L&T, BCH,T.C., Siemens, C&S make).(A) for 25 /

32 A rating

Providing and erecting metallic vitrified danger notice board as

218 per language suggested by engineer incharge for MEDIUM 4.00 69.69 Each

VOLTAGE installation to be erected as per IS-2551.

Providing & erecting Medium Voltage Danger Notice Board

219 sticker as per language suggested by engineer incharge of standard 21.00 26.26 Each

size as per IS-2551

Providing & erecting approved make street light / wall mounting

junction box compression moulded from DMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in

/ loop out in built terminal suitable for four core cable, waterproof

of I.P. 54 protected with clamp or bolt nut & earth bolt of

following size.[A] 200mm x 127mm x 83 mm

Providing & erecting approved make street light / wall mounting

junction box compression moulded from DMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in

/ loop out in built terminal suitable for four core cable, waterproof

of I.P. 54 protected with clamp or bolt nut & earth bolt of

following size.[B] 250mm x 194mm x 99 mm

Providing & erecting approved make street light / wall mounting

junction box compression moulded from DMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in

/ loop out in built terminal suitable for four core cable, waterproof

of I.P. 54 protected with clamp or bolt nut & earth bolt of

following size.[C] 327mm x 254mm x 120 mm

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved

make OEM has to submit test certificate including value of earth

223 resistance of installation duly stamped and signed by agency and 6.00 7095.25 Each

officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.[B] For

Electrical installation up to 11 KV located in other than normal

soil i.e. Soft Rock, Marshy Soil etc. -Length of Pipe : 2 mtr -

Back filling Compound :1 no. Bag of 25 Kg.

Description Of Item Quantity Rate Unit Amount

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soilLength of pipe -

MtrBack filling compound - 1 Nos Bag of 15 Kg.

Earting:-Providing earthing stations for equipment earthing as

shown and specified in drawing for equipment complete with : (a)

3Mtr long Copper Bonded Earth Rod 10' x 5/8" made from high

tensile low carbon steel and each rod should molecularly bonding

99.9% + 30Kg RESLO Earthing. LPI pure electrolytic copper to

225 the low carbon steel core in accordance with national and 2.00 15907.50 Each

international standards such as BS6651, BS7430 and UL467.

LPI's Resistance Lowering Compound (RESLO-30Kg) comprises

electrical conductivity. Equivalent to Model: LPI 3Mtr CBR+

Kg GRESLO.as per directed by Architech & Engineer In charge

226 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 45.00 794.87 Kg.

Add Extra for excavation in Hard rock by dry and wet blasting

and chiselling for pipe type earthing.

Providing & erecting open well type horizontal mono block pump

set with stainless steel body having following specification (C)

228 H.P. single phase open well motor pump set suitable for 185 LPM 1.00 9613.18 Each

discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe

with control panel.Cat. II

Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible motor

229 having[D] For 5 HP 3 phase open well horizontal mono block 2.00 18746.61 Each

pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head

suitable for 50/65 mm dia delivery pipe Cat.II

Providing and erecting ISI marked PVC insulated PVC Sheathed

230 Flat flexible Submersible copper cable approved make of 45.00 104.03 Mtr.

following Size. (B) 3 Core x 2.5 Sq. mm.

Providing and erecting ISI marked PVC insulated PVC Sheathed

231 Flat flexible Submersible copper cable approved make of 55.00 146.45 Mtr.

following Size. (C) 3 Core x 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following

size of cables,((H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Description Of Item Quantity Rate Unit Amount

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables.(B) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables.((C) 4 core 25 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables.(A) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.(C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.(B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

238 wall with necessary clamps or in existing trench / pipe at road 110.00 269.67 Mtr.

crossing or floor of following size of cables.(A) 4 core 2.5 Sq.

Making trench in soft soil of suitable width of 90 cm deep for

239 laying cable or locating the fault all over the run and back filling 45.00 46.46 Mtr.

the same and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid

240 cover the cable crosswise & also on both sides with covering of 7. 30.00 134.33 Mtr.

5 Cms. layer of sand above & below cable (16 bricks per meter)

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth for laying of cable. below ground / road surface for

enclosing cable and back filling the same to make ground as per

original.(A)50 mm dia

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2

(Class-3) to be erected at road crossing on or floor as directed for

laying of cable. The pipes as following size of dia & weight per

mtr.(B) 50 mm Dia. (2.5Kg/6RMT)

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2

(Class-3) to be erected at road crossing on or floor as directed for

laying of cable. The pipes as following size of dia & weight per

mtr.(C) 63 mm Dia. (4 Kg / 6RMT)

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.(G)

3 & 1/2 core 185 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.(A)

2 to 4 core 2.5 / 4 Sq. mm

Description Of Item Quantity Rate Unit Amount

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.(A)

3 & 1/2 / 4 core 25 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

247 pressure tool & connected to switchgear terminals with 8.00 80.80 Each

brass/cadmium plated nut bolts in an approved manner. ( I )

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

248 pressure tool & connected to switchgear terminals with 2.00 25.25 Each

brass/cadmium plated nut bolts in an approved manner. (E)

Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

249 pressure tool & connected to switchgear terminals with 80.00 6.06 Each

brass/cadmium plated nut bolts in an approved manner. (A) 1.5/

Solderless crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner. (B) 10 Sq.mm

Solderless crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Providing and fixing approved make Perforated C type cable tray.

Made from sheet steel. The cable tray should be single or double

bended as per required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS 2629/4759. with max

17.5% perforation with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer

in charge..(1) 50 X 50 X 1.6 mm Thick

Providing and fixing approved make Perforated C type cable tray.

Made from sheet steel. The cable tray should be single or double

bended as per required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS 2629/4759. with max

17.5% perforation with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer

in charge..(2) 100 X 50 X 1.6 mm Thick

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

254 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with 130.00 1948.29 Each

aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

255 M.S. Pipe down rod erected duly painted for fan complete with 60.00 108.07 Mtr.

proper insulation without leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar

grouted in RCC slab with Making the site as original.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan

hook or Fan box.

Supplying & erecting approved make low noise decorative exhaust

258 fan having square frame ABS body with inbuilt lowers & square 30.00 1703.87 Each

frame.200mm with 1350RPM Cat.II

Description Of Item Quantity Rate Unit Amount

Providing and erecting 3-4 Mtr decorative Pole with Lighting

259 Fixture with Foundation and 1Mtr. Chemical Earthing as per 2.00 35855.00 Each

Architect/Engineer inchrge approved.

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

260 15%,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt 30.00 295.93 Each

,LED LED driver efficiency > 85 %( fitting required LM-79 &

LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may

Light with integral driver,(iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet,Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

261 15%,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt 4.00 535.30 Each

,LED LED driver efficiency > 85 %( fitting required LM-79 &

LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may

Light with integral driver,(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet

Supplying and erecting led lamps with following wattage capacity

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V

in built-surge protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5(A) LED Lamps

integral type, with PC diffuser suitable LAMP holder (ii) 5 to

watts ,Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

263 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver 880.00 427.23 Each

efficiency > 85 %( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20,(ii) 11-

15 watts, Surge-2 KV,Cat-lll

Description Of Item Quantity Rate Unit Amount

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

264 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver 200.00 589.84 Each

efficiency > 85 %( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20,(iii) 16-

20 watts, Surge-2 KV,Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 %( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

Strip Light ,(i) Minimum 4.8W-120 LED per meter (2 wire, IP-65)

with non integral suitable Driver complete,Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

266 270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to 30.00 813.05 Each

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 %( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

Light 425 Lumens, Surge-2KV,(i) 3 to 7 WattsCat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

267 270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to 12.00 1367.54 Each

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 %( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

Light 425 Lumens, Surge-2KV,(ii) 8 to 11 Watts,Cat-lll

Description Of Item Quantity Rate Unit Amount

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

Flood Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (ii)

above 48 to 60 WattsCat-lll

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

Flood Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. ((iv)

above 90 to 120 wattsCat-lll

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

Flood Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (vii)

above 200 to 250 watts,Cat-lll

Supplying and erecting LED Dwon light , 3k- 6.5K. 11-20 watt,

as per architect slection .

Supplying and erecting LED Hanging Light , as per Architect

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following

size of cables (G) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Description Of Item Quantity Rate Unit Amount

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.(G)

3 & 1/2 core 185 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

275 pressure tool & connected to switchgear terminals with 30.00 81.61 Nos.

brass/cadmium plated nut bolts in an approved manner. (J)

Providing and erecting ISI Marked 3core 185 Sq.mm XLPE

insulated 11 KV armoured cable Aluminium conductor IS-7098

to be laid on wall with clamps or in provided cable trench / pipe

approved manner as directed.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

277 with necessary clamps or in existing trench / pipe at road crossing 50.00 16215.27 Rmt

or floor of following size of cables.(F) 3 1/2 core 240Sq. mm (

185 Sq. mm 1/2 core)

Approved make standard Draw out type 4 Pole Air circuit breaker.

Having 50 kA breaking capacity with ICU=ICS=ICW (1

sec)Vsr=690 v, Ui=1kv ,impulse voltage=12 kv with following

type of relay and accessories.(v) 2000 Amp 50kA Cat III

Supplying & erecting carbon dioxide (CO2) fire extinguisher user

of following capacity with necessary clamps made from 50 x 6 mm

M.S. Flat with nut & bolts grouted in wall complete.[A] For

Kg Capacity

Supplying & erecting D.C.P. type fire extinguisher for following

capacity cartridge type with gun metal cap 150 gram CO2 gas

cartridge, powder and brackets confirming to IS 2171 1985 and

complete erected with necessary clamps made from 50 x 6 mm M

S Flat with nuts and bolts grouted in wall complete.[A] For 5 Kg

Providing & erecting water cooler having storage capacity 150 Ltr.

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

282 suitable buster DC pump capacity 80 psi, mention with 40 psi 2.00 24394.53 Each

inline type post carbon filter auto low & high pressure switches

with following size of storage tank & LPH capacity & erected as

directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Supply, Installation, Testing and Commissioning of Mains voltage

230VAC,50 Hz (±10%) DC voltage supply to contribution units

24V ± 1V DC THD at rated output <1% SNR >-50dB at rated

output (unweighted filter) Inputs Mic input sensitivity 1 mV (+1/-

3dB) Aux input sensitivity 100mV (+1/-3dB) Frequency response

200 Hz to 12 kHz Input Impedance 4.7 kohm Equaliser Center

frequencies of filters 250Hz,2kHz and 8kHz Filter bandwidth

octave. Make: DSPPA/Beyerdynamic/Bosch

Description Of Item Quantity Rate Unit Amount

Supply, Installation, Testing and Commissioning of Chairman

Unit Electrical Nominal Acoustic Input at the microphone 85dB

SPL Frequency Response 400Hz to 10Khz Mechanical

Dimensions (without microphone) (H x W x D) 54x136x138mm

Length of the microphone from the base of the stem 488mm

Weight 1.2 kg Mounting Tabletop Color Charcoal Environmental

Operating temperature-5 ºC to +45 ºC Storage temperature-40 ºC

to +70 ºC. Make: DSPPA/Beyerdynamic/Bosch

Supply, Installation, Testing and Commissioning of Delegate Unit

Electrical Nominal Acoustic Input 85dB SPL Frequency Response

400Hz to 10kHz Mechanical Dimensions (without microphone)

(H x W x D) 54x136x138mm Length of the microphone from the

base of the stem 488mm Weight 1.2 kg Mounting Tabletop Color

Charcoal Environmental Operating temperature-5ºC to +45ºC

Storage temperature-40ºC to +70ºC. Make:

DSPPA/Beyerdynamic/Bosch

Supply, Installation, Testing and Commissioning of EXTENSION

CABLE ASSEMBLY - 10 MTRS. Make: Standard

Supply, Installation, Testing and Commissioning of DSP with 6x2

audio matrix switcher, 4 microphone inputs, 1 USB plug & play

Audio input, 1 S/PDIF audio input, 2 HDMI inputs, 2 Analog

audio output, 1 HDMI output, 32-bit advanced Digital Analog

simultaneous processing of all input and output signals, Features

AEC (Acoustic Echo Cancellation), Powerful Maestro Room

Automation, 2X1 HDMI switcher inbuilt, HDMI inputs switching -

connected input, minimum video resolution support 4K@60Hz

(4:4:4), user-friendly graphic interface via web page to set volume

(gain and attenuation) and DSP per input that features execute

each port, can be control via RS-232 port using API commands,

De-embeds the audio signal from the HDMI input for routing to

any of the outputs, Supports up to 10 global presets per I/O

configuration plus 10 mixer snapshot presets, LED indicators for

main power, line in/out, mic in, clipping and HDMI, Local

firmware upgrade via the USB type-A port, Certification: CE,

FCC, ISO 9001, ISO 14001, OHSAS 18001. Extra component or

equipment maybe added to match the complete specs. Make:

Clearone/Kramer/Biamp

Supply, Installation, Testing and Commissioning of 240W Mixer

amplifier with built-in USB/Bluetooth feature for audio streaming

Suitable for use in supermarkets, restaurants, schools, retail

chains, canteens, places of worship, gymnasiums etc

microphone/line inputs, plus music source input Insert feature to

use as a pre/power amplifie. Make: JBL/Bosch/Electro Voice

Supply, Installation, Testing and Commissioning of Coverage

angle HxV (-6 dB, 1 kHz) (°) 184 x 170 °, Coverage angle HxV (-

6 dB, 4 kHz) (°) 112 x 35 °, Dimensions (H x W x D) (mm) 205 x

136 x 117 mm, Frequency range (-10 dB) (Hz) 95 – 20000 Hz,

Operating temperature (°C) -25 – 55 °C, Rated input voltage (V)

70 V; 100 V, Sensitivity (1 W, 1 m, 1 kHz octave) (dB) 87 dB,

Storage temperature (°C) -40 – 70 °C, Weight (kg) 1.90 kg. Make:

JBL/Bosch/Electro Voice

Description Of Item Quantity Rate Unit Amount

Supply, Installation, Testing and Commissioning of UHF Wireless

Microphone, Dual Channel Non-Diversity Receiver, 50Hz-16kHz

290 Frequency Response, Cardioid Polar Pattern (Microphones), 1.00 22101.83 Nos.

Individual Channel: XLR / Mix out: ¼" jack Output. Make:

Shure/Studiomaster/AKG

Supply, Installation, Testing and Commissioning of 3.0 Active

USB 10 Mtr. Make: Milestone/Black-I/Liberty AV

Supply, Installation, Testing & Commissiong of Resolution UHD

(3840x2160). Brightness 5,000 lumens. Contrast ratio 30,000:1.

Contrast ratio - dynamic 3,00,000:1. Native aspect ratio 16:9.

Displayable colours (millions) 1073.4. Horizontal scan rate 31 ~

135Khz. Vertical scan rate 24 ~ 120Hz. Screen size 0.67m ~

7.68m (26.45" ~ 302.2") diagonal. LASER life30,000 hours.

Throw ratio 1.39:1 ~ 2.22:1. Projection distance 1.3m - 9.3m.

Zoom 1.6. Focal length 20.91mm~32.62mm/0.823"~1.284". Lens

shift Vertical +15%, Horizontal: +/-0%. Native offset 100%.

Connections Inputs 1 x HDMI 2.0, 1 x HDMI 1.4a 3D support,

x VGA (YPbPr/RGB), 1 x Audio 3.5mm Outputs 1 x Audio

3.5mm, 1 x S/PDIF, 1 x USB-A power 1.5A Control 1 x USB-A

service, 1 x RS232, 1 x RJ45, 1 x 12V trigger. Noise level (min)

30dB, Noise level (max) 32dB. Make: Sony/Epson/Panasonic

Supply, Installation, Testing & Commissiong of Ceilling Mount

Telescopic Projector Stand. Make: Standard

Supply, Installation, Testing and Commissioning of Fixed screen

294 MW (16: 9) - 120 inch MW (Fixed Frame screen). Make: 1.00 50299.01 Nos.

Panara/Suvira/Logic

Supply, Installation, Testing & Commissiong of 4x4 HDMI

Matrix Switcher, Supports 4K/60 4:4:4, HDR, HDCP2.3

compliant. Audio Matrix, audio out can de-embedded from

arbitrary input or output. Individual volume adjustment on each

295 L+R output. Supports 4K to 1080p down-scaling up to 2 outputs. 1.00 195250.17 Nos.

HDMI out provides 2.5W to power Active Optical Cable (AoC).

HDMI Output support up to 5V500mA for AoC cable

Controllable by front panel, IR, RS232 and TCP/IP.Make:

Milestone/Kramer/Liberty AV

Supply, Installation, Testing & Commissiong of 4K HDMI

Extender Receiver & Transmitter. Transmits HDMI video and

audio signals up to 100M over a single Cat6 cable; Support video

resolution up to 3840*2160@30Hz; Compliance with HDMI

standard protocol; Support reverse IR control; Compliance with

296 HDMI 1.4 standard protocol; Support reverse IR control; Support 2.00 35368.18 Nos.

HDCP1.4 -- High-bandwidth digital content protection

technology; Can automatically identify and configure various

display modes; Built-in automatic adjustment system, make the

image smooth, clear and stable; Easy to install, plug and play.

Make: Milestone/Black-I/Kramer

Description Of Item Quantity Rate Unit Amount

Supply, Installation, Testing & Commissiong of Diagonal Size

65" Type VA. Resolution 3840x2160(16:9). Pixel Pitch(mm)0.372

x 0.372. Active Display Area(mm) 1428.48 (H) x 803.52 (V).

Brightness(Typ.) 350 nit. Contrast Ratio 4000:1. Gamut 92%

(DCI-P3, CIE 1976). Operation Hour 16/7. Haze Glare. Speaker

Type 10W 2ch. Video HDMI 2.0 (3). HDCP2.2. USB 2.0 x

External Control RS232C(in/out). RJ45, BT/WiFi Yes. Power

Supply AC 100 - 240 V, 50/60 Hz. Power Consumption:

Max[W/h] 182, Typical[W/h] 124, Sleep mode less than 0.5W.

Dimension (mm): 1453.9 x 831.0 x 46.3, Package 1611 x 973 x

185. Weight (kg): Set 24.9, Package 33.3, VESA Mount (mm)

X 400, Bezel Width (mm) 9.2mm(U/L/R), 11.2mm(B). Processor

Cortex A72 1.7GHz Quad-Core CPU. Storage (FDM) 8GB.

Safety 60950-1 / 62368-1. EMC Class B. IP Rating IP5x. Security

802.1x(WPA2 Enterprise) : EAP-TLS, EAP-TTLS, EAP-PEAP.

Make: LG/Samsung/Sony

Supply, Installation, Testing & Commissiong of Diagonal Size

55" Type VA. Resolution 3840x2160(16:9). Pixel Pitch(mm)0.372

x 0.372. Active Display Area(mm) 1428.48 (H) x 803.52 (V).

Brightness(Typ.) 350 nit. Contrast Ratio 4000:1. Gamut 92%

(DCI-P3, CIE 1976). Operation Hour 16/7. Haze Glare. Speaker

Type 10W 2ch. Video HDMI 2.0 (3). HDCP2.2. USB 2.0 x

External Control RS232C(in/out). RJ45, BT/WiFi Yes. Power

Supply AC 100 - 240 V, 50/60 Hz. Power Consumption:

Max[W/h] 182, Typical[W/h] 124, Sleep mode less than 0.5W.

Dimension (mm): 1235.1 x 707.9 x 46.3 mm, 1402 x 858 x

mm. Weight (kg): Set 18.1, Package 23.6, VESA Mount (mm)

X 400, Bezel Width (mm) 9.2mm(U/L/R), 11.2mm(B). Processor

Cortex A72 1.7GHz Quad-Core CPU. Storage (FDM) 8GB.

Safety 60950-1 / 62368-1. EMC Class B. IP Rating IP5x. Security

802.1x(WPA2 Enterprise) : EAP-TLS, EAP-TTLS, EAP-PEAP.

Make: LG/Samsung/Sony

Supply, Installation, Testing & Commissiong of 43 inch UHD

4K Smart 3840 x 2160 LED Panel, Maximum Brightnes 350 nits /

cd/m2 (Sustained), Contrast Ratio 4000:1, Color Gamut 92% DCI-

P3 92% CIE1976, Viewing Angle (H x V) 178 x 178°, 3 x HDMI

/ 2 x USB, Wi-Fi & Ethernet Connectivity. Make:

LG/Samsung/Sony

Supply, Installation, Testing and Commissioning of 4K UHD, 12x

Optical Zoom, Horizontal Angle of View: 71 ° – 8.2 °, Vertical

Angle of View: 42.7 ° – 4.5 °, Horizontal Rotation Range: ±170 °,

300 Vertical Rotation Range: -30 ° – +90 °, Pan Speed Range: 2.7 ° – 1.00 286142.09 Nos.

35.7 °/s, Tilt Speed Range: 2.7 ° – 31.5 °/s, Control: IR Remote,

RS-232, or UVC protocol, AI-controlled Autoframing and Smart

Face Tracking. Make: Peoplelink/logitech/Clearone

Supply, Installation, Testing & Commissiong of Diagonal Size

75". UHD(4k),3840*2160. Viewing Angle (H/V) 178:178.

Response Time 8ms. Operation Hours 16/7. Panel TypeDirect,

60Hz. Brightness (Typical) 400cd/m2. Contrast Ratio (Dynamic)

1,200:1. Bulit in Speaker (12W X 2CH). TouchType IR, 40 points

to touch. Object Recognition Range5mm/10mm/15mm. Touch

Response Time ≤10ms. HardnessTempered Glass. Operating

System Android 11 (AOSP). RAM4GB, Storage 32GB. Processor

A55 X 4. Set Dimension (WxHxD) 5.60 X 3.34 X 0.28 in with

OPS. Make: LG/Samsung/Maxhub

Description Of Item Quantity Rate Unit Amount

Supply, Installation, Testing & Commissiong of Diagonal Size

65". UHD(4k),3840*2160. Viewing Angle (H/V) 178:178.

Response Time 8ms. Operation Hours 16/7. Panel TypeDirect,

60Hz. Brightness (Typical) 400cd/m2. Contrast Ratio (Dynamic)

1,200:1. Bulit in Speaker (12W X 2CH). TouchType IR, 40 points

to touch. Object Recognition Range5mm/10mm/15mm. Touch

Response Time ≤10ms. HardnessTempered Glass. Operating

System Android 11 (AOSP). RAM4GB, Storage 32GB. Processor

A55 X 4. Set Dimension (WxHxD) 4.88 X 2.94 X 0.28 in with

OPS. Make: LG/Samsung/Maxhub

Supply Installation, Testing and Commissioning Addressable Fire

Alarm Panel . Make: GST/Morley/Hochiki

Supply Installation, Testing and Commissioning of Optical

304 Thermal Multi Criteria Smoke Detector with Base. Make: 130.00 4396.53 Nos.

GST/Morley/Hochiki

Supply Installation, Testing and Commissioning of Addressable

305 Intelligent Wall Mount Sounder Strobe with Base. Make: 10.00 13304.73 Nos.

GST/Morley/Hochiki

Supply Installation, Testing and Commissioning of Manual Glass

Call Point. Make: GST/Morley/Hochiki

Supply Installation, Testing and Commissioning of Addresaable

Isolator Module. Make: GST/Morley/Hochiki

Supply Installation, Testing and Commissioning of 2C x

Copper Armored Fire Alarm Cable. Make: Finolex/Polycab/RR

Supplying, Erecting, Testing & Commissioning the passenger /

stretcher lift having following main features:(C) With General

PLUS ADDITIONAL SPECIAL FEATURES attached herewith.

Prem. Cat.

Providing & erecting open well type horizontal mono block pump

set with stainless steel body having following specification,[D]

310 For 5 HP 3 phase open well horizontal mono block pump set 1.00 16984.67 Nos.

suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable

for 50/65 mm dia delivery pipe, Cat.II

Providing and erecting ISI marked PVC insulated PVC Sheathed

311 Flat flexible Submersible copper cable approved make of 100.00 112.21 Rmt

following Size. (b) 3 Core x 2.5 Sq. mm.

Providing and erecting ISI marked PVC insulated PVC Sheathed

312 Flat flexible Submersible copper cable approved make of 100.00 155.06 Rmt

following Size. (c) 3 Core x 4 Sq. mm

supplying and erecting FIRE 2C x 1.5 sq mm FRLS copper

armoured cable as per directed by Architech & Engineer In charge

Description Of Item Quantity Rate Unit Amount

Supply Installation , testing and Commissioning Addressable fire

alrm panel, 4 loop, networkable,multi-protocol, analogue

addressable fi re alarm control panel, Display:6x40 character

(240x64 pixels) blue liquid crystal display with backlight

illumination, Control Keys: Evacuate, Silence/Resound,

MuteBuzzer, Extend Delay, System Reset, Show Alarm

Zones,Programming Keys: 2 independent programmablefunction

keys and LED indicators, Indicators: Fire, Fault, Disablement,

Test, Buzzer Muted, Delayed Mode, Sounders Silenced, Sounders

Disabled and Power. Also dedicated fault LEDs for System Fault,

Sounder Fault, Supply Fault and Earth Fault. 40, 80 or 160 LED fi

re zone indicators optional, PROTOCOL DEVICES Supports

Apollo (Xplorer, XP95 and Discovery), Hochiki (ESP) & System

Sensor protocol devices. Loop Capacity: 500mA per loop, Output

Relays: Fire relay: Single pole changeover 24V DC 1A Extended:

Single pole changeover 24V DC 1A Aux relay: Programmable

single pole changeover 24V DC 1A Onboard Data Ports: 1 x

RS485 (Repeater connection)1 x PC Programming Port4 Optional

Ports: RS232 third party protocol interface Sounder Circuits:

output circuits, 1A per circuit.1,DIMENSIONS [MM] (H X W X

D): 391.5 x 390 x 147, COLOUR:RAL 9002 - Grey white,

OPERATING TEMPERATURE:0°C to +40°C, RELATIVE

HUMIDITY:5% - 95% non-condensing, IP30

(EN6059),MATERIAL:Mild steel sheet rear enclosure. ABS

plastic front cover to BS EN60950. All displays and controls are

carried on the enclosure door, OPERATING VOLTAGE:110 /

230V AC +/-15%, PSU RATING:24V DC 4A, STAND-BY

BATTERY DURATION3(BASED ON APOLLO

DEVICES):Stand alone: 48 hoursWith network card or repeater

connected:24 hours,AUXILLIARY OUTPUT1:+24V DC 250mA

fused, make in HONYWELL Morley DXc4.as per directed by

Architech & Engineer In charge

Supply Installation , testing and Commissioning Network Card,

connect panels together to create a network a DXc Network card,

315 must be fitted to each panel. The Network card is fitted to the four 1.00 51805.78 Nos.

studs using the screwssupplied to the L/H side of the control panel

make in HONYWELL Morley ( 795-099).

Description Of Item Quantity Rate Unit Amount

Supply Installation , testing and Commissioning of Optical

Thermal Multi Criteria smoke detector, optical-thermal sensor uses

thermal assistance to the core photoelectric smoke detector to give

enhanced false alarm immunity and faster response to a wide

range of incipient fires. The plug-in unit combines two separate

sensing elements that are managed by embedded software to act as

a single unit, optical-thermal detector conforms to EN54-7, a 58°C

fixed temperature and rate of rise thermal assistance conforming to

EN54-5. The thermal detection function combines thermistor

technology with a software corrected linear temperature response.

In areas where the normal daytime activities may potentially create

unwanted alarms, the detector can be programmed to operate in a

“heat only” mode, automatically reverting to full photo-thermal

operation during unoccupied periods, The sensing elements of the

HM-PTSE optical-thermal detector are adjustable so the sensitivity

thresholds of each element can be changed by the panel offering

the ability to customise the device for the changing use of the area

it is protecting. The detector has two integral red LEDs that

provide 360° local visual indication of the device status, Height:61

mm installed in B501AP base, Diameter:102 mm installed in

B501AP base, Weight:99 g (incl. base), Max Wire Gauge for

Terminals:2.5 mm2, Color:ivory, Material:PC/ABS, Operating

Voltage Range:15 ... 32 V DC,Temperature Range:-30°C ...

+70°C, Make in HONYWELL Morley HM/PTSE.

Supply Installation , testing and Commissioning of Addresaable

Isolator module, isolator uses a unique mechanicaldesign allowing

each module to be mounted either in a wall box or on a DIN rail.

Irrespective of the mounting method chosen, the address switch is

maintenance and fault finding process, both the LEDs and the

address switches can be viewed without having to remove the

cover of the mounting box. The LEDs, being multi colour, provide

diagnostic information regarding the status of the isolator. The

fault isolator modules should be placed between groups of sensors

317 on the loop wiring to protect the loop if a short circuit fault occurs. 2.00 5147.42 Nos.

If a short circuit fault occurs, the two isolators located either side

of the short circuit fault will automatically sense the voltage drop,

open their switches and remove the devices from the rest of the

loop. If the line voltage then rises above a fixed threshold,

indicating that the short circuit fault isremoved, then the isolator

module will automatically restore the power to the isolated group

of devices.Dimensions (mm):93 x 94 x 23 (H x W x D),Operating

voltage:15 to 30 Vdc,

Make in HONYWELL Morley MI-DISO ,as per directed by

Architech & Engineer In charge

Description Of Item Quantity Rate Unit Amount

Supply Installation , testing and Commissioning of Addresaable

control Output Module, MI-DCMO uses a unique mechanical

design allowing each module to be mounted either in a wall box

(M200-SMB) or on a DIN rail (using M200- DIN). Irrespective of

the mounting method chosen, the address switch is both visible

and fault finding process, both the LEDs and theaddress switches

can be viewed without having to remove the cover of the

mounting box. The LEDs,being multi colour, provide diagnostic

information regarding the status of the output. For ease

ofinstallation, testing and maintenance, the field wiring terminals

are of a plug in design.The MI-DCMO can be used to operte dry

contacts for door holders, air handling unit shut down or other

similar functions. Optionally the module can be used to supervise

wiring to the ouput load providing monitoring of the external load

voltage or power supply. If the monitored voltage falls below

threshold then a fault condition will be indicated.Dimensions (H x

W x D):93 x 94 x 23 (mm), Operating voltage:15 to 30 Vdc Make

in HONYWELL Morley MI-DCMO,as per directed by Architech

& Engineer In charge

Supply Installation , testing and Commissioning of Response

319 Indicator, Make in HONYWELL Morley RI/007CR.as per 2.00 173.42 Nos.

directed by Architech & Engineer In charge

Supply Installation , testing and Commissioning of Addressable

Intelligent Wall Mount Sounder strobe,This system provides a

greater degree of fl exibility to system designers, provides a more

robust solution and saves time for the installer as all devices are

interchangeable without the need to disconnect or disturb the

wiring, Individual tone and volume settings and sounder tone

synchronisation can be adjusted from the panel enabling the sound

320 intensity to be adjusted to suit the application., Faster installation, 5.00 10333.61 Nos.

Reduced full life costs, Flexible installation, Reduced install errors

and easy fault fi nding, Supply Voltage:15 -28 VDC,

Height:64mm, Body Colour:red, Number of tones:32, Volume

Settings:High, Medium, Low, Temperature Range: -25°C to

+70°C†, IP Rating: IP24 with low profile (B501AP) base, Make in

HONYWELL Morley WSS-PR-N05.as per directed by Architech

& Engineer In charge

Supply Installation , testing and Commissioning of Manual Glass

Call Point, call point is an addressable break glass manual call

point which has a simple rotary decade switch at the rear of the

unit for addressing.A specialist test key may be inserted into the

bottom of the unit to lower the glass and release the micro-switch

and thus a full functional test is achieved.Installation efficiency,

compliance with the latest standards are at the heart of the call

321 point range , The LED status is controlled by fire panel and shows 5.00 4811.55 Nos.

blinking RED ach time the device is polled, or continuous RED to

indicate fire.Dimensions, Semi-flush mounting:89 x 93 x

(WxHxD), Surface mounting:89 x 93 x 59.5 (WxHxD), Operating

Voltage:15V to 32Vdc max, Current Consumption:Quiescent

(without isolator) 385μA, Alarm Current: 7.8 mA, Make in

HONYWELL Morley HM/MCP/GLASS.as per directed by

Architech & Engineer In charge

4 ZONE DETECTION 1 AREA EXTINGUISHANT PANEL

WITH BATTERY MAKE IN RAVEL

323 Isoletion Swich Blue MAKE IN RAVEL 1.00 7163.14 Nos.

324 Manual Pull Station - Release Green in color MAKE IN RAVEL 5.00 8337.28 Nos.

Description Of Item Quantity Rate Unit Amount

325 Manual Pull Station - Abort. Yellow in Color. MAKE IN RAVEL 5.00 8337.28 Nos.

CONVENTIONAL HOOTER RED COLOUR MAKE IN

SOUNDER/ BEACON 24V SYS-HS MAKE IN RAVEL /

SYSTEM SENSOR

SMOKE DETECTOR INCLUDING STD BASE MAKE IN

RAVEL / SYSTEM SENSOR

RATE OF RISE HEAT DETECTOR (58oC) 300 SERIES MAKE

IN RAVEL / SYSTEM SENSOR INCLUDING STD BASE

End of Line Adaptor WITH PRESSURE GAUGE MAKE IN

331 Pressure Switch MAKE IN OEM 1.00 16160.42 Nos.

332 Health Monitoring cum Alarm panel MAKE IN OEM 1.00 15660.58 Nos.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user

of following capacity with necessary clamps made from 50 x 6 mm

M.S. Flat with nut & bolts grouted in wall complete.[B] For 5.5 /

6.5 KG Capacity

Supplying & erecting D.C.P. type fire extinguisher for following

capacity cartridge type with gun metal cap 150 gram CO2 gas

cartridge, powder and brackets confirming to IS 2171 1985 and

complete erected with necessary clamps made from 50 x 6 mm M

S Flat with nuts and bolts grouted in wall complete.[B] For 10 KG

Providing, Fixing, Testing and Commissioning of Electric driven

pressurization pump suitable for automatic operation and

consisting of following: complete in all respect as required.a)

Horizontal Type, multistage, centrifugal pump of cast iron body

and bronze impeller with stainless steel shaft, mechanical seal and

flow of 180 lpm at 70m.head conforming to IS standards. The

pump shall be capable of giving a discharge of not less than

percent of the rated discharge, at a head of not less than 65 percent

of the rated head. The shut off head shall be within 120 percent of

the rated head.b) Squirrel cage induction motor with suitable HP

with synchronous speed 2900 RPM, Suitable for operation on

volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure,

horizontal foot mounted type with Class-F insulation, Conforming

to IS standards.c) Common Base plat for Pump and motor and

coupling, coupling guard and other accessories as required for

complete installation of pump set. d) Suitable cement concrete

foundation with cement concrete plaster complete with anti-

vibration arrangement. Make in LUBI/ PRIMA/ WILLO

Supplying, Installation, Testing and Commissioning of

Control Panel suitable for automatic operation of fire fighting

pumps consisting (1 no. of Hydrant & 1 no. jockey pump.)(a)

Necessary cabling, wiring, earthling from panel to individual

equipment shall be included in the quoted price.(b) Facility for

control cabling.(d) interlocking of pressure switch with pumps

Make in L&T /EDWORD

Supply, Installation, Testing and Commissioning of 150 mm

dia Pressure Gauge of range 0 - 15 Kg / cm² conforming to IS -

3624 having bourdon tube of stainless steel 310 in cast

aluminium, stove enameled, black, weather proof case with

337 outer, screwed aluminium bezel and complete with necessary 3.00 5232.09 Nos.

U-type stainless steel siphon tube and cock including

providing suitably painted angle iron support to the tube

etc.as per specification complete as required. Make in H.GURU/

PRIME/ TIMES

Description Of Item Quantity Rate Unit Amount

Supply, Installation, Testing and Commissioning of Pressure

Switches for automation of fire pumps. Pressure switches shall be

double pole single throw type suitable for single phase supply

with diaphragm. Aluminum Enclosure with IP 66 protection

as required including cabling. Make in INDFOSS/ DANFOSS/

Supply, Installation, Testing and commissioning of CS Y type

Strainer complete with necessary accessories WITH M.S

strainerbybolting,threadingorweldingwithspiralwoundgraphitefille

dgaskets,matchingflange s,nuts,bolts,studs&washersSize: a)150

mm Dia. Make in KARTAR/ SANT/ ZOLOTO

Supply, Installation, Testing & Commissioning of Butter fly valve

16.0 pn with ductile iron flange body, cast iron hand, including