Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC | L1 | Accepted-AOC LOW BID | |
| 2 | L2₹1.9 L+₹9,095 (5.00%)Rejected-Finance | L2 | Rejected-Finance HIGH BID |
| Sl No | Description | Qty | Unit | SASINDRAN E L2 | SASI T L1 |
|---|---|---|---|---|---|
| 1.00Motor installation work at Nellikkunnummal DWSS | |||||
| 1.00 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | 2 | sqm | 3,412.5 ₹6,825 | 3,250 ₹6,500 Lowest |
| 1.00 | 90.14.24.18:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.3 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors. | 1 | each | 787.5 ₹787.5 | 750 ₹750 Lowest |
| 1.00 | 90.14.28.3:S & F Motor starters of the following ratingsThree phase DOL starters for 10HP motor | 1 | each | 3,150 ₹3,150 | 3,000 ₹3,000 Lowest |
| 1.00 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) | 10 | metre | 26.25 ₹262.5 | 25 ₹250 Lowest |
| 1.00 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) | 30 | metre | 63 ₹1,890 | 60 ₹1,800 Lowest |
| 1.01 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) | 8 | each | 15.75 ₹126 | 15 ₹120 Lowest |
| 1.01 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) | 8 | each | 12.6 ₹100.8 | 12 ₹96 Lowest |
| 1.01 | 90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm | 30 | metre | 147 ₹4,410 | 140 ₹4,200 Lowest |
| 1.01 | 2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N | 1 | each | 3,570 ₹3,570 | 3,400 ₹3,400 Lowest |
Tender Value
₹1.9 L
EMD Value
₹4,641
Closing Date
16 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AE,LSGD
AE,LSGD,narikkuni gp
270/26 Narikkuni GP Nellikkunnmmal dwss-Motor installation work at Nellikkunnummal DWSS
2025_LSGD_807548_7
AE/NRKI/7/25-26
Open Tender
Civil Works - Others
Item Rate
180 days
narikkuni
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹4,641
Yes
6 Nov 2025
9 Oct 2025
18 Oct 2025
9 Oct 2025
16 Oct 2025
9 Oct 2025
Amount
Motor installation work at Nellikkunnummal DWSS
90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
90.14.24.18:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.3 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.
90.14.28.3:S & F Motor starters of the following ratingsThree phase DOL starters for 10HP motor
90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm
2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N
OD334606/2025-2026:Supply, installation testing and commissioning of 5 HP vertical open well submersible motor pump set at rated voltage 3 phase 415 V 50 Hz AC supply, maximum head 116 meters, discharge 10500LPH at 89 meter head, Deccan make 5 DX 6stage, delivery pipe 50 mm in existing open well using suitable tools and plants
2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
OD334318/2025-2026:Supply and fixing 50 mm GI pipe as support for hanging submersible motor pump set in open well.
OD334321/2025-2026:Charges for procurement, preparation and submission of application for availing three phase KSEB service connection with necessary sketch, Test and completion report, stamp fee etc including necessary liaison work as required.
OD334322/2025-2026:Supply and fixing flat iron clamps made of 40x6 mm flat iron clamp of 40 cm with suitable size bolt and nut for fixing delivery pipe on the top of the well as required.
OD334323/2025-2026:Supply and installation of dust and vermin proof , 3 phase syntax meter board (GSMB 6535) and to fix KSEB meters , fuse units, CT etc as required including fixing it on the wall , making good the damages colour washing etc as required.
OD334324/2025-2026:Supply and laying 10 mm or nearest size stainless steel rope
OD334325/2025-2026:Supply and laying 12 mm or nearest size nylon rope
OD334326/2025-2026:Supply and providing50 mm full way wheel valve (GM) -zoloto
OD334327/2025-2026:Supply and providing 50 mm NRV (GM)zoloto
OD334328/2025-2026:Supply and providing 50 mm ASTM flange set
OD334329/2025-2026:Supply, Treading, Laying and joining of 50 mm size 80 sedulous ASTM pipe approved make with required specials as delivery pipe using required leak proofing materials etc. as required.
OD334330/2025-2026:Supply and fixing single phasing cum dry run preventer
OD334331/2025-2026:Supply and fixing Digital multifunction meter to read V,A,F,PF -3 phase accuracy class 1 LED
OD334332/2025-2026:Supplying and fixing 63 A HRC fuse with HRC fuse link with connections in existing meter board.
OD334333/2025-2026:Supplying and fixing 63 A,2 way neutral links mounted on DMC/SMC base with connections in existing meter board.
OD334334/2025-2026:Providing and fixing 2 x 25mm x 3mm G.I strip test joint for earthing system
OD334335/2025-2026:Providing and fixing 25mm x 3mmGI strip earth lead from the test joint to the earth plate
OD334336/2025-2026:Supply, conveyance, installation, testing and commissioning of LED Bulk head fittings IP 65 directly on wall including cutting necessary holes, giving connections with the extended original wiring, making good the damages colour washing etc as required. (Philips/Bajaj/Havels/wipro)
OD334337/2025-2026:Supply and providing 25x3mm brass nut and bolt etc. as required
OD334338/2025-2026:Supply and providing 25x6mm brass nut and bolt etc. as required
OD334340/2025-2026:Supply and fixing 9 watt LED bulb in the existing batten holder as required
OD334341/2025-2026:Dismantling old PVC conduit with wire which are not in use and handing over the same to Departmental authorities with proper written acknowledgement
OD334590/2025-2026:Lifting the damaged existing open well submersible motor pump from well, disconnecting the supply wire, dismantling the delivery pipe and accessories which are not in use and handing over the same to the concerned departmental authorities with proper written acknowledgement.
1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.
1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A
1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm
1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1.17.32:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 6 sq. mm
OD335045/2025-2026:Supply and fixing suitable pressure gauge in the delivery side of the pump
OD335046/2025-2026:Supply and fixing of suitable MS Hook on outer wall of the building for tying the Gi wire used for supporting the wp wire from KSEB pole
SASINDRAN E (BID ID -2393152)
Bidder Name
SASINDRAN E
SASI T
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1346198.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .