SPECIAL REPAIRS TO NE BLOCK OF PAO (ORs), DSC KANNUR BUILDING AT KANNUR UNDER AGE(I) CANNANORE

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling battens spaced exceeding 15 cm for tiles, shingles etc of any size including tilting fillets complete all as specified and directed.

Dismantling of timber scantlings 40 sqcm and over in section in any position, unframed work complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards, slabs, blankets, any thickness, including cover fillets complete all as specified and directed.

M&L 2nd class hardwood scantlings, clean sawn, framed and fitted as in rafters, purlins etc; complete all as specified and as directed..

All as in item No. 5 here-in-before but except timber

S&F Mild steel rectangular/ tubular trusses using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 as in purlins etc including special shaped washers complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in roofing, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 180 mm PVC (SWR) pipe as in half round gutters including drop ends/stop end suitable for 180 mm half round valley gutter and fixing with MS/PVC clamps suitable for steel sheet roof complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

M&L Preparing new steel and iron surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L GI framework for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre suspended with hangers 6 mm dia (up to 1200 mm length) GI wire of suitable length adjusting level fixed to roof by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long complete all as specified and directed

M&L 4 mm thick non asbestos fiber cement building boards, fixed or laid/inserted to timber/GI/Aluminium frame work with screws, fixed in ceiling flat or sloping complete all as specified and as directed.

M&L Preparation of new plastered or unplastered ceiling surface and applying two coats of distemper oil emulsion over a coat of primer over a coat of 3 mm thick putty complete all as specified and as directed.

M&L Surface excavation not exceeding 30cm deep and averaging to 15cm deep and getting out in hard/dense soil complete all as specified and directed.

M&L Hard core with broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to true surface complete all as specified and directed.

M&L 75mm thick in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate finished even and smooth with out using extra cement as in plinth protection complete all as specified and directed.

Demolition of concrete in ground floor and pavings not exceeding 15 cm thickness (below or above GL) for cement concrete un-reinforced complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and Brushing neat cement slurry with 3 kg cement per Sqm complete all as specified and directed.

M&L 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in flooring complete all as specified and directed.

M&L 20mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L Coloured joint free non skid ceramic tiles, 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc. complete all as specified and directed.

M&L Coloured non skid ceramic tiles, 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc. complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings etc including raking out jointing, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering in Cement Mortar 1:6, 10 mm thick on stone masonry surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering in Cement Mortar 1:4, 15 mm thick on stone masonry surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L Coloured glazed ceramic tiles, 300x200x7mm set and jointed in neat cement slurry and pointed in coloured cement to match on vertical surfaces of wall such as skirting dado etc. including 10mm thick rendering in CM 1:6 as backing coat complete all as specified and directed.

Demolition of brick work or concrete/ stone masonry wall built in cement mortar complete all as specified and directed.

M&L Walling with laterite stone, uncoursed, well bonded bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

Taking down chowkat or frames and not exceeding 1.5 sqm each with shutters (without taking off shutters from frame) complete all as specified and directed.

Taking down chowkat or frames exceeding 1.5sqm but not exceeding 4sqm each with shutters (without taking off shutters from frame) complete all as specified and directed.

M&L for 12mm thick pre-laminated particle board exterior grade pre laminated both side with decorative choice lamination and other side balancing white lamination fixed to aluminium framework complete all as specified and as directed.

M&L Glazing with 3mm thick figured/frosted glass in squares not exceeding 0.5sqm each pane secured with oil putty/glazing beads complete all as specified and directed.

S&F Powder coated aluminium frame for doors, partition walls, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Powder coated aluminium window and ventilator shutters (as directed) sliding/side hung type without sash bars, aluminium section weighing exceeding 0.55kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, suitable handle, side lock for shutter, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F Powder coated anodised aluminium 6mm thick decogrill 50mm x 50mm mesh fixed to window frame (weight not less than 2.54kg/m) complete all as specified and directed.

S&F Powder coated aluminium door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each doors, hinges anodised snap beading screws etc., complete all as specified and directed.

M&L 4mm thick plain sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

M&L Solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S&F factory made solid PVC door shutter, 30mm thick (style), consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc. Details complete all as specified and as directed and drawings.

S&F 300mm long aluminum alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section or cast aluminum alloy; complete all as specified and as directed.

S&F 100mm size, Butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150mm size, extruded aluminum anodized alloy handle, fabricated type complete all as specified and as directed.

S&F Aluminium door closer (extruded section )hydraulically regulated designation no 03 universal type, suitable for door shutters of 851 to 1000mm in width of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F 150mm size, Door stopper of aluminum body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 125mm long anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified and directed.

Taking down 15 mm bore GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

All as per Item No 49 here-in-before but 20 mm bore complete all as specified and directed.

M&L 15mm bore UPVC pipe of pressure rating 10Kg f/cm² fixed on walls ceilings or on floor complete all as specified and as directed.

All as per item No. 51 here-in-before, but 20 mm bore complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in floors or trenches complete all as specified and directed.

All as per item no 53 here-in-before but fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with access door for UPVC type 'B" pipe complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), white with grating and union for discharge all as specified and directed .

S&F Viterous China urinal partition, white of size 310x700mm complete all as specified and directed.

S&F in repairs 32mm dia, waste coupling of PTMT suitable for urinals complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin, size 580 x 450 mm, flat back, white with brackets including cutting for pinning in ends of brackets including taking out the existing unserviceable WHB complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe but including taking out the existing unserviceable pedestal pan complete all as specified and directed.

S&F in repairs plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs 32 mm dia waste fittings brass chromium plated for wash hand basin with long screwed shanks and fly nuts flange end bedded in red lead cement and other end complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs Stop valves, cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs PVC low level flushing cistern, 10 ltrs capacity including all fittings and brackets bends, flush pipe, etc., complete all as specified and directed.

S&F in repairs PVC connection 450 mm long (high density) 15 mm dia double brass sockets both ends with rubber washer complete all as specified and directed.

S&F in repair Bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screwed and down screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and as directed.

S&F in repairs Health faucet (jet spray), 15mm dia with flexible LDPE pipe with jet of 100mm long on one end and socket joint of 15mm dia on other end, nozzle of jet shall be chromium plated complete all as specified and as directed.

S&F in 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 125/110 mm bore PVC(SWR) `P` trap of with grating, setting and jointing with solvent cement complete all as specified and directed.

S&F 125/110mm bore PVC (SWR) Gully trap with grating, setting and jointing with solvent cement complete all as specified and as directed.

Demolition of concrete (reinforced) as in floors and paving not exceeding 15cm thickness complete all as specified and directed.

M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs etc and set in cement mortar 1:6, complete all as specified and directed.

M&L Reinforcement TMT bars, 6mm to 8mm dia, cut to length bent to shape required including cracking, bending, spirally hooking ends and binding with MS wire (Annealed) not less than 0.90 mm dia, complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation and getting out in soft/ disintegrated rocks complete all as specified and directed.

Returning, filling in with excavated soil including spreading levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point. complete all as specified and directed.

Dismantling and breaking up drain pipes any dia (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 160mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints or jointed with solvent cement laid in trenches or in floors complete as specified and directed.

M&L Cement concrete bedding in CC 1:4:8, type D-2 using 40 mm graded stone aggregate to drain pipe 150 mm bore, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L Complete removal of existing treatment on surfaces of wall, preparation of surface with one coat of acrylic wall care putty for making the surface smooth and even including sanding, and applying two coats of oil emulsion distemper over one coat of wall primer complete all as specified and directed.

M&L for complete removal of existing treatment on external walls by scrapping down old treatment, preparation of surfaces using 3 mm thick wall care putty and applying two coats of exterior grade anti-algal acrylic emulsion paint over one coat of wall primer paint complete all as directed as per manufacturers instructions.

M&L preparation of newly plastered surfaces of external walls and applying 3 mm thick wall care putty and two coats of exterior grade anti-algae acrylic emulsion paint over one coat of wall primer paint complete all as directed as per manufacturers instructions.

M&L preparation of surface with one coat of acrylic wall care putty for making the surface smooth and even including sanding, and applying two coats of oil emulsion distemper over one coat of wall primer complete all as specified and directed.

S&F framed work such as grills and gratings etc with ends of bars shouldered and /or riveted or forged in to spikes; framed guard bars; framed balusters; walkways; railing, framework of water tanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth or broken rubble mixed with earth around in layers not exceeding 25cm. complete all as specified and directed.

Dismantling water tanks of capacity exceeding 250 litrs but not exceeding 500 litres and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

M&L Cement concrete 1:4:8, type D2, 40mm graded stone aggregate as in fencing post foundations complete all as specified and directed.

Taking down carefully copper/aluminium point wiring of light, fan, socket or power complete, including fittings such as switches, ceiling rose , pendants, sockets etc, and making good disturbed surfaces of wall floor, ceiling etc., complete all as specified and directed.

M&L point wiring complete with 1.5 Sq mm single core PVC insulated unsheathed copper conductor FRLS cable multi stranded 1100 Volt grade drawn through and including non metallic rigid PVC conduit concealed to wall fixed to ceiling/roof etc with necessary fixing accessories such as bend, elbow, socket, etc with fixing material including 1.5 Sqmm single core PVC insulated un sheathed copper conductor FRLS cable multi stranded 1100Volt grade as earth continuity conductor green in colour connected to common earth dolly complete all as specified and as directed for the following:- Note : Cutting chases for fixing conduit shall be measured and paid separately.

(a) One light point controlled by one switch.

(b) One ceiling fan point controlled by one switch.

(c) One bell point controlled one bell push.

(d) One exhaust fan point controlled by one switch

(e) One 3 pin ,5 amps switch socket on same board with other switches.

(f) One 3 pin ,5 amps switch socket on independent board.

All as per item No.92 above, but for one 3 pin 15 amps switch socket combination on independent board with FRLS cable of size 2.5 sqmm with and including 2.5 sqmm copper conductor cable as earth continuity conductor and connected to common earth dolly complete all as specified and directed.

Cutting chase on wall of width 30 mm dia for concealing PVC conduit of size 20/25 mm dia with and including replastering , smooth finishing to match the existing colour of the wall complete all as specified and directed.

Cutting chase on wall of width 50 mm dia for concealing PVC conduit of size 20/25 mm dia with and including replastering , smooth finishing to match the existing colour of the wall complete all as specified and directed.

Cutting chase on wall of width 75 mm dia for concealing PVC conduit of size 20/25 mm dia with and including replastering , smooth finishing to match the existing colour of the wall complete all as specified and directed.

S&F modular bell push , 240V, one way, single pole, 5 amps, including connecting up electrically all as specified and directed.

S&F modular switch, 240V, one way, single pole, 5 amps, including connecting up electrically complete all as specified and directed.

S&F modular switch, 240V, one way, single pole, 15 amps, including connecting up electrically complete all as specified and directed.

S&F ceiling rose poly carbonate, 3 terminal including connecting up electrically complete all as specified and directed.

S&F Modular socket, 5 pin, 5/6 amps, multipurpose, flush type, including connecting up electrically complete all as specified and directed.

S&F modular socket, 2 in 1, 5/15 amps, flush type non-interlocking, non shutter type including connecting up electrically complete all as specified and directed.

S&F Sheet metal enclosure factory made for MCB DB, SPN, 8 way with 200 amps bus bar, 415 volt, double door type, fixed /flushed on wall including electrically connecting up complete all as specified and directed.

S&F Sheet metal enclosure factory made for MCB DB, SPN, 4 way with 200 amps bus bar, 415 volt, double door type, fixed /flushed on wall including electrically connecting up complete all as specified and directed.

S&F MCB, SPN, 40 Amps, 240 V, 50Hz including electrically connecting up using wiring lugs complete all as specified and directed.

S&F MCB, SP, 6 to 32 Amps, 240 V, 50Hz, including electrically connecting up using wiring lugs complete all as specified and directed.

S&F calling bell, AC 230 volt, single pole including electrically connecting up complete all as specified and directed.

S&F stepped type modular electronic fan regulator SP, 230 volt, 120 watts including connecting up electrically complete all as specified and directed.

S&F modular white cover plate with frame 2 module complete all as specified and directed.

S&F modular white cover plate with frame 3 module complete all as specified and directed.

S&F modular white cover plate with frame 4 module complete all as specified and directed.

S&F modular white cover plate with frame 6 module complete all as specified and directed.

S&F modular metal flush box 1/2 module completely fixed in the wall complete all as specified and directed.

S&F modular metal flush box 3 module completely fixed in the wall complete all as specified and directed.

S&F modular metal flush box 4 module completely fixed in the wall complete all as specified and directed.

S&F modular metal flush box 6 module completely fixed in the wall complete all as specified and directed.

S&F modular metal flush box 8 module completely fixed in the wall complete all as specified and directed.

Taking down unserviceable fluorescent tube light fittings, S&F decorative ultra slim linear LED light fittings with extruded aluminium heat sink, environmental friendly, energy efficient ready to use pack of ELITE LED of 20 watt LED 6000K, complete all as specified and directed. Model LHEXBYPNIN1W020 of Havells or other makes given in list of manufacturers

Taking down unserviceable fluorescent tube light fittings, S&F decorative ultra slim linear LED light fittings with extruded aluminium heat sink, environmental friendly, energy efficient ready to use pack of ELITE LED of 10 watt LED 6000K, complete all as specified and directed. Model LHEXBYPNIN1W010 of Havells or other makes given in list of manufacturers

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buries directly in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to GI earth wire 4 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to earthing test point , main DB , panel board, continues earth lead projected by 15 mm bore dia GI pipe light grade , 20 mm bore dia GI pipe for watering, necessary cover with suitable reinforcement complete all as shown on electrical plate No.3 of SSR part-I of 2009 all as specified and directed. Note:- Rate quoted shall deem to include for GI earth lead up to 7.5 mtr length.

Taking down carefully ceiling fan with rod complete after disconnecting electrically fixing the same after repairs such as servicing, greasing, applying one coat white synthetic enamel paint after preparation of surfaces replacing twin core twisted multistranded copper flexible of size 23/0.0076 as required including writing of MES NO. connecting up electrically complete all as specified and directed. Note:- Replacement of capacitor & bearing shall be measured and paid separately.

M&L rewinding of ceiling fan 1200 mm sweep any type and make, cutting and removing burnt winding wire without damaging stator, removing old insulation of polyester paper, rewinding fan motor with super enameled copper wire of same gauge/dia with correct number of turns for auxiliary and main winding, varnishing, packing, soldering, new lead of twin core twisted multistranded copper conductor flexible cable of size 23/0.0076, reassembling, testing and commissioning complete including replacement of capacitor 2.5 mfd and refixing , complete all as specified and directed.

Supply only ball bearing suitable for 1200 mm sweep ceiling fan including removing old unserviceable bearing and testing complete all as specified and directed.

M&L Sub main wiring 2 runs of single core 6 sqmm copper conductor FRLS, cable PVC insulated, unsheathed 1100 volt grade drawn through and including nonmetallic rigid PVC conduit and all accessories such as bends, elbow, socket, tees, saddles, etc., fixed in concealed to wall /ceiling etc including 6 sqmm single core, copper conductor FRLS cable, PVC insulated, multistranded, 1100 volt grade as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note:- 2 Runs of 6 sqmm and one run of 4 sqmm copper cable and one run of PVC conduit will be measured as one length.

S&F Exhaust fan AC sinle phase 230/240 volt of size 280 mm sweep with louvers .with complete fittings complete all as specified and directed.

S&F GI earth continuity wire of 4mm dia drawn through with and including 15mm bore GI pipe, light grade complete all as specified and directed.

M&L for MS clamps made of flat iron (duly painted with enamel paint over one coat of red oxide primer) of 40mm x 4 mm thick duly bolted with double nuts, and washers on existing wooden beams of approx size 300 mm x 200 mm with and inclusive of fan down rod of 1.5 to 2 mtr length duly fitted on MS clamps with bolts, nuts, with safety pin and twin core twisted multistranded copper conductor of flexible wire of size 23/0.0076 from ceiling rose to fan complete all as specified and directed.

LAKSHMI BUILDERS

T.P.SUNIL KUMAR

JEETH CONSTRUCTION