Equipment Items

Dual Output Regulated Dc Variable Power Supply Dual Output Regulated Power Supply - Input Voltage: 230V/50HzAC - Output Voltage: (0–30V)DC - Output Current: (0–2A)DC - Protection Circuit: Over Voltage and Over Current protection, Short-circuit protection - High efficiency: Greater than 85% - Low ripple and noise: Less than 50 mV

Digital Storage Oscilloscope Bandwidth: 50 - 100 MHz. Sampling Rate: 1GS/s. Channels: 2 (minimum) Power Supply: 100V–240V AC, 50-60 Hz Automatic Measurement: Vpp, Vavg,RMS, Frequency, Period, Vmax, Vmin, Rise Time, Fall Time, + Width, - Width, +Duty, - Duty etc., Horizontal Scale: 5 ns/div – 100 ns/div or equivalent Vertical Resolution: 8 bits (2 Channels simultaneously) Vertical Sensitivity: 1 mV/div – 10 V/div (at input) Waveform Math: +, -, x , ÷, invert, FFT etc., Waveform Storage: 16 waveforms or equivalent Communication Interface: USB Host, USB interface. 7-inch color display or equivalent Basic trigger functions

Digital IC Trainer Kit with Breadboard 5V DC, 1A regulated power supply ±12V DC / ±15V, 200 mA regulated power supply Solderless breadboard to accommodate 8 × 16-pin ICs ZIF (Zero Insertion Force) IC sockets Supports TTL and CMOS ICs Logic IO LEDs for output monitoring 8 buffered LED outputs 8 debounced switch inputs TTL clock: 1 MHz Variable clock generator: 0.5 Hz to 50 Hz Single pulse output: 100 ms (buffered, positive and negative outputs) One seven-segment display with 4 BCD inputs Built-in logic probes Built-in logic switches Experiments on basic logic gates, flip-flops, counters, and multiplexers

PCB Prototype Machine PCB Prototyping & Antenna fabrication System Manual Software Copper CAM & Mach3 Mill Resolution (X/Y) 3.125 Micro Meter Working Area (X/Y/Z)(mm) 200x300x120 mm Minimum Width Line & Space in mm 0.1 (4 mil) Max Travel Speed (mm/sec) 58 (2.28 “) Drilling (mm), 0.2 -3.175 (8-125 mil) Maximum Drilling Cycles/ Min 50 Main Axle Power Rate 300 W Main Axle Rotating Speed 25000 RPM Max working speed 3500mm/min Feeding Height 120 mm Working drive 0.02-0.05mm Repositioning accuracy 0.01-0.02mm Supported format Standard Gerber,DXF,Excellon Capability of Processing various materials - FR4, Copper clad, Acrylic, Metal, Aluminum and etc., Power - 220 V AC Weight - 52 Kg