SPECIAL REPAIR TO OFFICERs LIVING IN BILLET GREASE TRAP MESH TRAP AND DRAINS OF VARIOUS MESS AT AF STN TEZPUR UNDER GE (AF) TEZPUR

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc,but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Dismantling bricks (laid flat or on edge) or brick tiles in floors,channels, kerbs, aprons, etc. (each layer) laid, bedded and pointed in any mortar, complete all as directed.

Removing mortar from and cleaning bricks,stacking for measurement including all extra handling and removal and disposing off rubbish for brickwork built in cement or cement lime mortar,complete all as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level),complete all as directed.

Demolition of cement concrete (un reinforced) of any description and in any poition not specifically provided for,complete all as directed.

Dismantling timber in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section in unframed work,complete all as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work,complete all as directed.

Dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings,complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as directed.

Dismantling expanded metal,any thickness or mesh,weight per square metre not exc.4.00 kg,fixed with steel or wood fillets,if any,complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all asspecified and directed.

Materials and Labour for plain cement concrete (1:3:6) Type C-2 using 40 mm graded aggregate,in foundations,filling and mass concrete,complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C2 using 40 mm graded aggregate as in surface channels and drains,complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work,complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work,complete all as specified and directed.

Materials and Labour for providing precast reinforced cement concrete (1:2:4) type B1 using 20 mm graded aggregate, in landings, cover slabs (for man holes etc.) chullah hoods,chajjas,water troughs, mangers, shelves and similar articles with plain faces and setting in mortar (1:4) complete with joints to match including demolition of existing reinforced cement concrete (reinforcement cut as required to facilitate demolition) in landings,cover slabs (for man holes etc.) chullah hoods,chajjas,water troughs, mangers, shelves and similar articles with plain faces,all as specified and directed. Note:- Reinforcement will be measured and paid seperately.

Materials and Labour Extra for forming fair finishing to surfaces channels/ drain 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, etc complete all as specified and directed.

Add or deduct from serial item No 19 here in before for each 25 mm girth or part thereof over or under 30 cm for forming fair finished drain or channel in cement concrete, using extra cement including forms, moulds, mitered /stopped ends etc. complete.

Supply only integral water proofing compound all as specified

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4),complete all as specified and directed.

Materials and Labour for,bricks,sub class B,laid flat, in floors,old size bricks,bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3), complete all as specified and directed.

All as per Serial Item No.23 Here in Before but except bricks. Note:- Old Bricks obtained from Serial Item No 2 and 3 Here in Before shall be re-used.

Materials and Labour for,bricks,sub class B,laid on edge,in floors,old size bricks,bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3),complete all as specified and directed.

All as per Serial Item No.25 Here in Before but except bricks. Note:- Old Bricks obtained from Serial Item No 2 and 3 Here in Before shall be re-used.

Materials and Labour for second class hard wood plain fillets,square, rectangular or triangular in section, bullnosed,splayed,chamfered or rounded on one edge or face,sectional area exceeding 6 but not exceeding 13 sq.cm,wrought,secured with screws,complete all as specified and directed.

Materials and Labour for second class hard wood in scantlings,clean sawn and fixed, complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Materials and Labour,for mild steel works,conforming to Fe 290,Grade E-165,in framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work,complete all as specified and directed.

Materials and Labour for,hard drawn steel wire fabric,weight per square metre not exceeding 4.00 Kgs,cut to lengths,bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement,complete all as specified and directed.

Supply and Fix,1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size,holes punched;including clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles,etc.as required,complete all as specified and directed.

Material and Labour for pre-painted,galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

Supply and Fix, aluminium with powder coating (minimum thickness of powder coating 50 micron) frame,92 mm x 29.5 mm for three track sliding windows with one or more rebates including joining cleat for fixing etc., with sliding type shutters,without sash bars, aluminium sections with powder coated (minimum thickness of powder coating 50 micron) 39 mm x 20 mm including necessary joining cleats,glazing clips,rubber packing,anodised aluminium with powder coated (minimum thickness of powder coating 50 micron) snap beading,screws etc.(Thickness of aluminium sections not less than 1.5 mm),with suitable sliding & locking arrangement,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 4.8 mm thick sheet glass tinted,complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.

Supply and Fix,anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement as specified and directed.

Materials and Labour for,anodised aluminium snap grid frame work for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick,high pressure steam cured (HPSC) non asbestos fibre cement designer (primered) building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets,any thickness, including cover fillets,complete all as specified and directed.

Materials and Labour for,6 mm thick, asbestos cement plain building boards, fixed to timber framework with screws in ceiling, flat or sloping, fixed in repairs,including applying three coats of white wash after preparation of exposed surfaces,complete all as specified and directed.

Materials and Labour for,6 mm thick,high pressure steam cured (HPSC) non asbestos fibre cement designer (primered) building boards fixed or laid to aluminium framework with screws,fixed in repairs,complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) Type D2 using 40 mm graded aggregates as in floor/path/ hardstanding, complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming to IS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, conforming to IS 15622, Grade B IIa,in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, conforming to IS 15622, Grade B IIa,in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed.

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 8 to 9 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed.

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 8 to 9 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M,on vertical surface of wall such as dados, skirting etc,,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key,scrubbing down with water etc.,complete all as directed.

Raking out joints/ pointing to brick work in walls or to bricks on edge in floors,surface channels, roofs, etc.,work built in cement or cement lime mortar,complete all as directed.

Materials and Labour for rendering,10 mm thick,cement plaster, in cement mortar (1:4) on fair face of brick work or concrete surfaces in walls, complete all as specified and directed.

Materials and Labour for rendering,15 mm thick,cement plaster, in cement mortar (1:4) on fair face of brick work or concrete surfaces in walls and finishing surface even and smooth without using extra cement,complete all as specified and directed.

Materials and Labour for rendering,15 mm thick,cement plaster, in cement mortar (1:4) on fair face of brick work or concrete surfaces in walls and finishing surface even and smooth without using extra cement including applying three coats of white wash,complete all as specified and directed.

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls,complete all as specified and directed. Note:-Water proofing compound will be measured and paid seperately.

Raking out joints/ pointing to brick work built in cement or cement lime mortar in walls or to bricks on edge in floors, surface channels,roofs, etc.,including flush pointing to brick on edge pavings in cement mortar (1:4),complete all as specified and directed.

Raking out joints/ pointing to brick work built in cement or cement lime mortar to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc.,including flush pointing to bricks laid flat or brick tiles in pavings in cement mortar (1:4),complete all as specified and directed.

Materials and Labour for, flush pointing to brick on edge pavings in cement mortar (1:4),complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on walls, complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on ceiling, complete all as specified and directed.

Material and Labour for preparing surfaces plastered or unplastered on walls and applying one coat of cement based paint,complete all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of primer over and including 1mm thick wall care putty,complete all as specified and directed.

Materials and Labour for preparing new plastered or unplastered surfaces on walls and applying two coats of cement paint including priming surface with alkali resistant priming paint,complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint,including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new or previously untreated steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for preparing surfaces of wood and wood based materials,new or old of any description and girth, not otherwise described and treated with two coats of creosote,complete all as specified and directed.

Taking up or down,15 mm bore,steel tubing and connections,including cleaning for refixing or removal to store,complete all as directed.

Taking up or down,20 mm bore,steel tubing and connections,including cleaning for refixing or removal to store,complete all as directed.

Refixing,15 mm bore,old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed.

Refixing,20 mm bore,old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed. Note:- (Applicable for Serial Item No. 65 & 66) Serviceable old steel tubing and connections obtained from Serial Item No. 63 & 64 shall be re-fixed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,complete all as specified and directed.

Taking down carefully existing PVC valve less, syphonic action type, flushing cistern of capacity 10 Litres, including brackets, flush pipe,keeping aside in safe custody for reuse and refixing in original position,complete all as specified and directed.

Supply, laying, jointing and testing of,100 mm internal dia.,salt glazed stoneware drain pipes,conforming to IS 651:2007, Class ‘SP1’, laid in trenches and jointed including demolition and breaking up 150 mm internal dia. drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar,complete all as specified and directed.

Supply, laying, jointing and testing of,150 mm internal dia.,salt glazed stoneware drain pipes,conforming to IS 651:2007, Class ‘SP1’, laid in trenches and jointed including demolition and breaking up 150 mm internal dia. drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar,complete all as specified and directed.

Materials and Labour for reinforced concrete pipes,150 mm bore,Class NP2,laid and jointed with collars,complete all as specified and directed.

Materials and Labour for,150 mm bore, Class SN 8, SDR 34, ISI Marked (IS 15328) Unplasticised Non Pressure Poly Vinyl Chloride (PVC-U) pipes for use in underground drainage and sewarage system,single socketed, with elastometric sealing ring joints,laid in trenches or in floors including demolition and breaking up existing drain pipes (Salt glazed ware, AC or reinforced concrete),150 mm internal diameter,set in cement mortar, complete all as specified and directed.

Materials and Labour for,concrete bed to 100 mm bore drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; in plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate,complete all as specified and directed.

Materials and Labour for,concrete bed to 150 mm bore drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; in plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate,complete all as specified and directed.

Taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc., complete all as specified and directed.

Taking down carefully existing copper/aluminium circuit/submain wirings of any size (2 runs single core and earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed.

Disconnecting electrical connections and taking down carefully existing switch fuse units/MCB DBs of any description complete including Fuse/MCBs/MCCBs etc.,removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one light/fan point controlled by one switch, complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one bell point controlled by one bell push,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 5 Amps socket outlet independent,complete all as specified and directed.

All as per Serial Item No.81 Here in Before but for,one 3 Pin 5 Amps socket outlet on same board with other switch,complete all as specified and directed.

Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 15 Amps socket outlet independent,complete all as specified and directed.

Supply and Fix, switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and Fix,bell push, flush type, single pole, 5 Amps, complete all as specified and directed.

Supply and Fix, socket outlet 2 in 1, 3 pin, 5A, complete all as specified and directed

Supply and Fix,switch socket combination 2 in 1,5A,flush type, complete all as specified and directed.

Supply and Fix,switch socket combination 3 pin 5A/16A, 5 in 1 flush type, complete all as specified and directed.

Supply and Fix, Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Supply and Fix stepped type electronic fan regulator, flush type, on existing phenolic laminated sheet etc. as required , complete all as specified and directed.

Supply and Fix, Bell multi music type, AC 230 Volts,complete all as specified and directed.

Fixing Only,light fittings of any description,complete all as specified and directed. Note:- Serviceable Light Fittings obtained from Serial Item No.76 Here-in-Before shall be Re-Fixed.

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade,drawn into existing surface/recessed steel/PVC conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring, complete all as specified and directed.

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade,drawn into existing surface/recessed steel/PVC conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring, complete all as specified and directed.

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,complete all as specified and directed.

Supply and Fix,single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240V, complete all as specified and directed. [Cat No. 5078 11 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/Schneider/ABB]

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral,complete all as specified and directed. [Cat No. 5076 11 of Make Legrand or equivalent Model of Make L&T/Hager/ Seimens/GE/Schneider/ABB]

Supply and Fix, miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 to 32 Amps,C curve, complete all as specified and directed. [Cat No. 4085 87-4085 95 of Make Legrand or equivalent Model of Make L&T/Hager/Seimens/GE/Schneider/ABB]

Supply and Fix, miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, 6 to 32 Amps,C curve,complete all as specified and directed. [Cat No. 4086 09-4086 17 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/Schneider/ABB]

Materials and Labour for,earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire,complete all as specified and directed.

Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No 3 of SSR Part –I (2009) including testing on completion.

Ms Jahnabi Construction

VARNI BUILDERS