GENERAL

Filling of gravel for foundation trenches including cost of conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.39 MORD &304 MORTH

Filling of Red Earth for foundation trenches including cost of conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.39 MORD &304 MORTH

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of Machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters - 1 Rmt.

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of Machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters - 1 Bulb.

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete (BLD-CSTN-2-14)

For Plinth Beam

Masonary works in CM (1:6) Propostion with fly ash Cement Solid blocks of size 290X225X140mm for Manufacturing of Fly ash Solid blocks using fly ash of 80 kgs,Cement of 15kgs gyspum of 5kgs and stone dust including cost and conveyance of all Materials and labour charges ,scaffoldidng and curing charges etc.. complete with a Compressive streanth of not less than 50kg/Sqm for walls.

Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)

Roofing with corrugated G.I sheets 0.80mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses & cost of conveyance of all Material - 10 Sq.M. (BLD-CSTN-8-1)

Supply and fixing of M.S Plats and its fabricatin charges etc., complete for M.S Pipes - 1 Kg.

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

MAT-01789 BMW-D.13 Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Flooring with ceramic tiles, set over base coat of C.M (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kg/sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all Material like cement, sand water and tiles etc., complete for finished item of work (BLD-CSTN-7-6) - 10 Sq.M.

Dadooing to walls with Glazed coloured Tiles of any size Ist Quality set over base coat of C.M (1:3) prop. 12mm thick and neat grey cement slurry of honey like consistency spread @ 3.3 Kg of cement/sqm and jointed with neat white cement paste at 0.20 kg/sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all Material Labour charges, water to work site, operational. incidental, mixing mortor, fixing in position, lift charges, curing, etc., complete for finished item of work - 10 Sq.M

Supply, Transportation and Fixing of 30W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, supply Input voltage 120-270 V AC, P.F>0.90, high power LED's having system efficacy>100 lm/W and junction temprature<70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution, THD< 10% at 110 Volts AC, driver efficiency >90%, CCT:3000K-5700K, minimum CRI>70, etc., complete including fixing of luminaire on wall/Pole with 1.0mt of 25mm dia GI pipe bracket and anti-tilting MS flat, 3 core 1.5 Sq.mm sheathed flexible round copper cable including all labour charges and giving connections etc., complete. a) Luminaire make: Wipro(Skyline)/Philips (Green line) / GE-Venture / Crompton(Nexus star) / Bajaj (Edge) / Havells (Endura Pearl) b) LED make:Philips Lumileds/ Cree/Nichia/ Osram/Samsung/LG LEDs

Drilling of Bore well by down the hole hammer to a finished dia of 165/150 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation, all consolidated formation etc, and reming the bore well to sub insertion of required casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials up to required depth as directed by the department, transportaion of drilling rigs and supporting vehicle and including bore development. Flushing of Bore Well at an average pressure of 150 PSI conducting yield test, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labor charges, but excluding the cost of casing pipe. The entire work should be carried out as per IS-2800 Part I & II 1979 and amended from time to time.

Supply and Delivery of 160mm Dia O.D.PVC Pipe (6 Kgf) duly slotted to full for casing including cost of couplng etc

Manufacture Supply and Delivery of ISI marked fully hot dipped Galvanized deep well IM-II (India Mark) hand pump assembly completed unit with 10Nos of connecteing rods (bright bars of 12MMdia 3Mts lengtheach conforming to IS :9301/1990 with its ammendments revisions upto date including Bis packing)

Supply & Fixing of 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

Manufacture, Supply and Delivery of RCC Collars conforming to B.I.S 458/2003 (rate per each collar) suitable for RCC Plain ended pipes including transporation etc., complete as per SS

Errectin of full pipe for deep well pump and assembly set complete with the material etc., complete

Dust Filling of foundation trenches as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Point Selction Charges for Bore Well to Geologist Report etc.,

Supply and Transportation of ……. Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: As per list of recommended brands as category I 1.0HP (25x25mm) ELEC-5.4.11

Providing High Yield Strength Deformed (HYSD) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. ( APSS No.126)

Toilet Door of Size of 750 mm X 2100 mm (Single shutter) (Powder Coated Mild Steel doors, frames & Shutters) SL no-798

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks Rate as per b) - do - labour charges only.

Provision for Seignorage charges

Provision Towards merit 2%

Provision Towards DMF 30%

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item