Proposed Construction of Shelter for Uraban homeless (Renbasera) in TP No.121, FP No. 163 (Naroda,Hanshpura, Kathvada) in Naroda Ward, North Zone, Sarkhej Ward for Ahmedabad Municipal Corporation.

Sr. No. Description Total Amount

Total Amount Rs.

I/We am/are willing to carry out work at __________% above / below (should be written in figures and words) the estimated cost

mentioned above. The amount of my/our tender works out as under

Estimated cost put to tender : Rs. 7,76,06,192.01 Estimated cost put to tender : Rs.

Add_____% Above : Rs ___________ Add_____% Below : Rs ___________

In words : Rupees _______________________ In words : Rupees _______________________

The contractor should get the sample of material in respect of quality and source of supply or manufacturer approved by Consultant /

AMC in all cases. All such approved samples should be kept at site in the custody of EIC-CMC/PMC/AMC. The tests for the make in

Note-1 external laboratory in presence of CMC/PMC/AMC to be carried out by Contractor at his own cost as per relevant latest codes.

Reinforcement steel & cement original purchase bills shall be produced to CMC/PMC/AMC as and when asked for.

Note-2 Rate includes for any height, any level, any lead & lift and as per directed by EIC.

Note-3 For Fire Fighting System Autoglow Mandatory Sinages and NOC Process and charges of NOC are included.

Signature of Contractor Additional City Engineer

Seal Building Project

Date Ahmedabad Municipal Corporation

Ahmedabad Municipal Corporation

Proposed Construction of Shelter for Uraban homeless (Renbasera) in TP No.121, FP No. 163 (Naroda, Hanshpura, Kathvada) in

Naroda Ward, North Zone, Sarkhej Ward for Ahmedabad Municipal Corporation.

BOQ for Civil, Site Development & Plumbing Work

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Excavation for foundation for depth upto 1.5 m including sorting out and stacking of useful

1 2,094.00 materials and disposing off the excavated stuff upto 50 Meter lead. Cum 115.92

(A) Loose or Soft Soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

2 1,926.00 useful materials and disposing off the excavated stuff upto 50 Meter lead. Cum 128.52

(A) Loose or Soft Soil

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of

3 1,224.00 useful materials and disposing off the excavated stuff upto 50 Meter lead. Cum 141.11

(A) Loose or Soft Soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

4 5,203.00 layers not exceeding 20 cm. in depth consolidation each deposited layer by ramming and watering Cum 129.10

etc complete as directed by EIC.

Conveyance charges of earth lime, murrum, building rubbish, manure, garbage, sludge, excavated

rock, fly ash, aggregate of any kind etc. comp. upto any lead. up to 5.0 km

6 271.00 Above 5.0 km & up to 10.00 km Cum 363.78

7 271.00 Above 10.0 km & up to 15.00 km Cum 396.58

Filling in plinth with sand under floors including watering, ramming, consolidating, compacting and

dressing etc. completed.

Filling in foundation and plinth with murrum, Garden or selected soil in layers of 20 cm. thickness

including watering, ramming and consolidating etc. Complete.

Providing and laying rubble soling, 230 mm thick, in a compact manner, foudation, road, footpath

etc. using 200 to 230 mm. cut size stones including filling the gaps with 40mm metal and packing

with stone chips with murrum covering and levelling the surface after filling the voids including

watering, ramming well and consolidating each layer, as directed by EIC.

Carring out plinth treatment to post construction / existing structure by spraying chemical solution

for termite control treatment including labour and material consistment with I.S.I specification.

Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent

is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface

is recommended as per I.S

Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate

12 175.00 20 mm nominal size) and curing etc complete excluding cost of form work in Cum 3,661.30

(A) Foundation and plinth

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work, using cement content as per approved Design Mix manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete

work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of

13 2,087.00 centering shuttering finishing and reinforcement including cost of admixtures in recommended Cum 4,853.56

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer in - charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained) (Cement level 450 kg)

Concrete of M25 grade with minimum cement content of 450 kg /cum for All Floor, All Height, All

Lead & Lift etc.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant.

The ready mixed concrete shall be laid in levels and pattern of bays as detail of architect and

finished with screed board vibrator , vacuum dewatering process and finally finished by floating,

brooming with wire brush etc. complete as per specifications and directions of Engineer-in-

14 83.00 charge.(The rate shall include cost of side shuttering with channels, rails , to form panels and groove Cum 7,440.00

cutting etc. including filling the joint with glass strip/polysulphite complete to use. The rate shall

also include the cost of reinforcement calculated at 5.14 kg/smt approximate) Rate includes for

all lead & lift & as per directed by EIC. (Note:- Cement content considered in this item is @450

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

15 611.00 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 171.68

concrete work in.

(A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in.

(B) Flat surfaces such as soffits of supspened floors slabs Landings and the like.

(1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in.

(C) Vertical surface such as walls (any thickness) partitions and the like including attached

buttresses & string course & the like.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in.

(G) Columns PillarsPosts and struts.

(1) Square Rectangular Polygonal in plan.

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in.

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels

not exceeding 1 M. in Depth.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

20 64.00 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 242.55

concrete work in. (M) Staircase with sloping or stepped soffits including risers and stringers

excluding landing.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

Drilling hole of required diameter and depth as directed for fixing of rebars,using hammer drill,

cleaning the hole using mechanical air flower, water etc,providing and fixing rebar in the drilled

22 110.00 hole using Fischer - FIS 360 or Equivalent approved make Cementetious chemical grout and sealant No. 631.00

with necessary scaffolding, staging, labour, tools and equipment etc. complete as directed by

Engineer-in-charge.

(a) 8 mm dia bar (100 mm depth)

23 110.00 (b) 10 mm dia bar (100 mm depth) No. 906.00

24 110.00 (c) 12 mm dia bar (125 mm depth) No. 1,261.00

25 110.00 (d) 16 mm dia bar (175 mm depth) No. 2,166.00

26 110.00 (e) 20 mm dia bar (200 mm depth) No. 4,212.00

27 110.00 (f) 25 mm dia bar (250 mm depth) No. 8,659.00

Brick work using common burnt clay building bricks having crushing strength not less than

35kg/Sqcm. In cement mortar 1:6 (1 cement : 6 fine sand) etc. complete as directed by EIC.

(B) Conventional

(i) in foundation & Plinth

29 131.00 (ii) Ground Floor Cum 4,253.46

30 156.00 (iii) First Floor Cum 4,293.25

31 156.00 (iv) Second Floor Cum 4,333.04

32 156.00 (v) Third Floor Cum 4,372.83

33 48.00 (vi) Fourth Floor (Terrace Floor) Cum 4,412.62

(i) Half brick masonry in common brunt clay building bricks having crushing strength not less than

35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

(B) Conventional

(i) Ground floor

35 183.00 (ii) First floor Sqm 652.64

36 183.00 (iii) Second floor Sqm 658.58

37 183.00 (iv) Third floor Sqm 664.52

Providing and fixing Chicken wire mesh jali 16 x 24 or approved size of 22 gauge at junction of

concrete and brick work / AAC Block work or between different materials after making "V" grove

between two different material surface and filled with rich cement mortar, nailing etc complete for

all floor, any height, all shape etc complete as directed by engineer in charge.

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Providing 20 mm thick double coat mala cement plaster on Exterior brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar 1:4 (1 Cement :

4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing etc. complete.

Providing 15 mm. thick cement plaster in single coat on fair side of brick wall for interior plastering

upto floor two level finished even and smooth in [II] Cement mortar 1:4 (1 cement : 4 fine sand) For

all levels, hights and leads of works. etc. complete as directed by EIC.

41 1,492.00 First Floor Sqm 178.77

42 1,492.00 Second Floor Sqm 201.93

43 1,492.00 Third Floor Sqm 225.09

44 202.00 Terrace Floor Sqm 248.25

Providing 10mm thick cement plaster in single coat on Ceiling instead of Walls for interior

plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement : 4-

sand) For all levels, hights and leads of works. etc. complete as directed by EIC.

46 868.00 First Floor Sqm 160.33

47 868.00 Second Floor Sqm 181.44

48 868.00 Third Floor Sqm 202.55

49 34.00 Terrace Floor Sqm 223.66

Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of

cement for all floors on brick / concrete wall work using water proofing materials in C M 1: 4 (1

cement 4 coasrse sand) including finishing with a flooting coat of neat cement slurry etc complete

50 174.00 for all floor. and shall be guaranteed for minimum period of 10 years after handing over the Sqm 249.00

completed building by the main contractor to be finished as directed. Stamp paper guarantee

years to be furnished before receiving any payment from the client. etc. complete as directed by

METALIC HERITAGE SURFACE TEXTURE

Providing and fixing of HERITAGE textured homogeneous wall finishing system from BAKELITE

HYLAM LTD or equivalent make consisting of a two component system of (25 kgs per Pack)

made of 92% silica particles coated with fade resistant pigments, 100% acrylic polymer bonding

agent (5kgs per pack) with the applied thickness of the coating being between 0.8mm-1.2mm to be

applied on a cured, smooth level plaster without keying, as per the shades/combinations approved,

as per the manufacturer directions, for usages, tobe applied by an approved applicator of the

manufacturer, as per the directions / supervision of the engineers in charge, all complete.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

52 8,377.00 undecorated wall surface to give an even shade including throughly brushing the surface free from Sqm 78.44

mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

53 2,385.00 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of Sqm 113.40

loose powdered materials.etc complete including one coat of primer.as directed by EIC.

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Applying two coats of acrylic lapy (putty) & two coats of primer of approved brand and

54 8,377.00 manufacture on new wall surface to give an even shade including thoroughly brushing the surface Sqm 40.19

free from mortar dropping and other foreign matter and sand papered smooth.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 coarse sand) laid over and

55 693.00 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing Sqm 982.83

and polishing etc. complete.

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars

56 70.00 laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement Sqm 1,176.03

slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed

57 255.00 of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white Sqm 960.47

Providing and laying white glazed tiles 6mm thick in skirting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and

59 1,062.00 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3coarse sand ) finishing with Sqm 1,062.50

flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing & laying Tac tile 300mm x 300mm x 15mm flooring. The tile laid using with adhesive as

61 439.00 per site condition including all labour and material, cleaning, curing, etc., complete all As per Sqm 2,555.00

drawings and design supplied by architect and instruction given by authority and E.I.C.

Providing & Laying 18 mm thick Mirror polish granite For flooring, counter, stair-riser, tread,

skirting, dedo, Jambs etc. machine cut or chiselled on bed of cement mortar 1:1 pointing with neat

cement slurry incl. moulding, Making grooves where it is required etc. comp. as per instruction of

engineer in charge.

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Providing and laying integral cement based water proofing treatment including preparation of

surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing

compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300 mm height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50%

of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to

IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining

walls upto 300 mm height including rounding of junctions of walls and slabs.

63 682.00 (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of Sqm 944.65

cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse

sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-

charge including laying glass fibre cloth of approved quality in top layer of plaster and finally

finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks

for curing and for final test.“All above operations to be done in order and as directed and specified

by the Engineer-in-Charge :

i) With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed.

Providing and filling with scrap of AAC block (good quality) as a cinder as directed by engineer in

charge in sunks in layers of 15 cm thk including watering placing ramming well etc. as directed.

Providing and fixing M.S. grill of required pattern top wooden frames of windows etc. with M.S..

flats at required spacing and frame alround square or round headed bolts and nuts or by screws

including applying a priming coat of red lead paint and two coats of oil painting etc complete (A)

Fabricating, supplying and fixing in position SS railing for staircase and balcony with brush finish

and 304 grade as per Indian Standrd and detailed drawing including grinding, cleaning and filling

the welded spots with SS finish (Only Length will be paid for payment heigth max.1.0 mt.). The

Work to be executed as per consultant drawing.

Fabricating, supplying and fixing in position SS daso for staircase and balcony with brush finish

and 304 grade as per Indian Standrd and detailed drawing including grinding, cleaning and filling

the welded spots with SS finish (Only Length will be paid for payment). The Work to be executed

as per consultant drawing.

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm

with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles

including applying a priming coat of red lead paint.

Providing and fixing flush door both sides laminated and I.T.W. beading all around by using I.T.W.

frame 120 m.m. x 80m.m.. shutter fabricated from 35 mm thick solid core malemine faced three

layered pre laminated flat pressed wood based exterior grade bonded BWP/BWR synthetic resin

70 120.00 having stamped IS 12823 grade I type II including both sides laminates and Stainless steel Smt 5,773.00

decorative type designs fixtures / fastening 2 Nos. Handles, 2 Nos. Aldropes, towerbolt, S.S. Hinges

etc.including I.T.W. triangular batten patti of size 30mm. x 30mm. including three coats of lacquer

polishing etc. as per architectural detailed drawing and as directed by engineer in charge.

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti

71 55.00 screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Sqm 1,427.62

Engineer in charge.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer

size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @

72 96.00 Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of Sqm 1,568.27

0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing window having extruded aluminum Colour anodized section frame main outer

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @

Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour inted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm

74 35.00 @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm thick frosted Sqm 1,163.92

glass as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@

75 55.00 Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze Sqm 1,509.90

colour tinted float glass as details etc complete for Fix window.

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood grain

raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures & fastenings.

77 272.00 Providing throating or plaster drip and moulding to R.C.C. Chhajja. Rmt. 41.25

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat

cement finishing, watering etc. complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with

sand in proper line and level as per guidlines of IRC : SP 632018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 35cm

length,30cm height and 15cm thick of M250 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer

(having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and

door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories

and screws etc. complete.

SIGNAGES HANGING FROM CEILING-

Providing, Fabricating & Fixing signage's using 304 grade Stainless steel 1.5 mm thick brushed

steel finish plate (2 nos) with 8mm thk. Acrylic sheet covered with vinyl of approved colour,

sandwiched between two S.S plate and fixed with s.s struds . Sandwiched plates should be fixed in

12mm X 12mm S.S 1.5mm thk.304 grade frame and punched (laser cut) lettering carried out on

both the s.s plates of required size and text as directed by Engineer and hanged to ceiling with the

help of S.S 8mm thick chain at both ends with making all the fixing arrangement to the ceiling and

to the plate complete.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part

IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm

made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’

at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof

board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x

mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center

84 73.00 ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size Sqm 600.94

20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting cleat,joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed

Providing & Laying & Jointing glazed stoneware pipes incl. excavation up to 2.0 mt.,refilling,

trasporting the pipe to work site, unloading, lowering in trenches, laying and jointing the pipes in

c.m. 1:1 incl. all jointing materials such as cement, sand, hemp, bitumen as dire.testing the pipe line

to a head of 1.5 mt. and hydraulic test as dire incl. watering trenches, spreading, and carting away of

surplus earth within 100 mt.lead as dire. etc.comp

(A) 230 mm dia.

Providing & laying cement concrete 1:5:10 (1-Cement, 5- fine sand, 10-graded stone aggregate

40mm Nominal size) bedding for stoneware pipes of following internal diameters with necessary

formwork & curing complete.

Providing & laying cement concrete 1:5:10 (1-Cement, 5-fine sand,10-graded stone aggregate

40mm Nominal size) bedding for stoneware pipes of following internal diameters with necessary

formwork & curing complete.

Providing & laying cement concrete 1:5:10 (1-Cement, 5-fine sand, 10-graded stone aggregate

40mm Nominal size) bedding for stoneware pipes of following internal diameters with necessary

formwork & curing complete.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1 cement

:2coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.

(I) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1Cement : 3-coarse

sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4

mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover

with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt.

of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. /Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre

93 1.00 (2) B type depth up to 1.50 Metre Each 19,139.07

94 1.00 (3) C type depth 2.25 Metre Each 23,209.64

Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe, tap

etc. complete. (A) White earthen ware flat back or corner type size 430mm x 260mm x 350mm

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 of Approved

make as approved by engg. in charge all complete. 15 mm Nominal Bore Dia

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

97 28.00 conforming to IS:8931 of Approved make as approved by engg. in charge all complete. 15 mm Each 1,321.00

Nominal Bore Dia

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet Shower Arm. (A) 100mm

Provdg. & laying S.W. Gully trap with C.I. garting brick masonry chamber & water tight C.I. cover

99 77.00 with frame of 300 mm x 300 mm size (inside) with standard weight. sqare mouth trap size 150 x100 Each 1,279.40

Providing erecting and fixing double coated ISI water tank of required capacity each with all

necessary fittings and connection etc. complete on terrace.

Constructing RCC Under Ground water tank with Providing and laying controlled cement concrete

M250 mix for R.C.C. work including reinforcement, boxing, centering, vibrating, , PVC water

stopper, curing and mixed with approved water proofing cement compound or "CEMWET" or

"PIDICRETE LW" integral water proofing admixture as water proofing agent to be mixed with

kgs. bags shall be as recommended by the manufacture of the water proofing material, concrete

work for top, bottom slab & side pardi for underground water tank item incl. Necessary excavation

& refilling the available earth, 15 cm thk 1:2:4 for bedding of concrete, 20 mm thk. water proofing

cement plaster in C.M. 1:3 with smooth finishing & Glazes tile Dedo, vata, watering etc. Comp. to

all face of tank . including locking arrangement outlet, inlet, overflow and washout outlet pipe

arrangement as necessary & C.I. Cover 0.60 x 0.45 weight not less then 35 kg with locking

arrangement. etc. comp as per structural drawing Including Reinforcement TMT-FE500D As per

drawings and design supplied by architect and instruction given by authority and E.I.C.

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Constructing RCC Overhead water tank with Providing and laying controlled cement concrete

M250 mix for R.C.C. work including reinforcement, boxing, centering, vibrating, , PVC water

stopper, curing and mixed with approved water proofing cement compound or "CEMWET" or

"PIDICRETE LW" integral water proofing admixture as water proofing agent to be mixed with

kgs. bags shall be as recommended by the manufacture of the water proofing material, concrete

102 55,000.00 work for top, bottom slab & side pardi for Overhead water tank item incl. 20 mm thk. water Liter 10.00

proofing cement plaster in C.M. 1:3 with smooth finishing & Glazes tile Dedo, vata, watering etc.

Comp. to all face of tank . including locking arrangement outlet, inlet, overflow and washout outlet

pipe arrangement as necessary & C.I. Cover 0.60 x 0.45 weight not less then 35 kg with locking

arrangement. etc. comp as per structural drawing Including Reinforcement TMT-FE500D As per

drawings and design supplied by architect and instruction given by authority and E.I.C.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning

design with C.I. screaed down or higned grating including cost of cutting and making good the

walls and floor 100mm inlet and 50mm outlet.

Provdg. And fixing to wall, ceiling & floor in true line and level UPVC pipe Schedule-40 of Prince,

Supreme , astral , finolex or equivalent make as approved by engg. incharge. pipe shall be fix on

wall with the help of clamp at every twi meter center to center of shall be concealed as directed in

cluding neccesarry fitting etc. in cluding testing of pipe and jointd and fixing the same with

adhesive solvent, including cost of all materials of following nominal bore.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore

tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of

the following outside Dia. Low densidy, complete with special falnge compression type fittings,

clipsetc. including making good the wall ceiling and floor. (F) 75mm

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to

IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each

116 336.00 other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm Rmt 822.99

diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to

IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each

117 238.00 other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm Rmt 826.88

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the following

nominal size. (B) 75mm dia.

Providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the following

nominal size. (C) 100mm dia.

120 13.00 Providing and fixing in position cowel went to pipes. (B) 75mm dia. Each 385.88

121 11.00 Providing and fixing in position cowel went to pipes. (C) 100mm dia Each 496.90

Providing & fixing vitrious china pattern- I in white colour wash down water closet European type

W.C. pan with integral 'P' or 'S' trap incl jointing the trap with soil pipe in cement motar 1 : 1 (1

122 37.00 Cement : 1 Fine Sand) including plastic seat & cover for wash down water closet with c.p brass Each 1,604.77

hinges and rubbers buffers of colour match to the W.C.pan & G.I. inlet connection for flush pipe

Providing and Fixing Handicap Toilet set including EWC, Cistern, Seat Cover, Fittings,

Washbasin,, Hinged Rail, Grab Bar and Faucet with Spatula Lever including Cast Iron chair backed

and necessary bolts and nuts complete, including painting of fittings and brackets, cutting and

123 8.00 making good the walls and floors wherever required to the satisfaction of Engineer-In-Charge. Each 40,986.00

Special Needs Toilet Set: Jaquar - CNS-WHT-755SN + Cistern Set CNS-WHT-207, Wash Basin

CNS-WHT-811 & Grab Bar 2 No. - WAC-WHT-BG0800 & WAC-WHC-BR0600 - 2 nos.+ or

Equivalent approved Make. Rates includes all lead & lift as directed by EIC.

Providing and fixing chromium plated brass half trun flush cock of approved quality including

fixing in pipe line etc. complete.(iii) 20mm dia.

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes

125 1.00 in walls and making good the same but excluding fittings. No. 2,257.69

(C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size

Providing and fixing coloured glazed oval type counter wash basin 550 x 460 in size and make

126 64.00 specified by the Architect with one C.P. pillar cock, C.P. stop cock, P.V.C. feed pipe C.P. waste No. 3,085.00

coupling (1 ¼"), rubber plug with C.P. chain, CP (as per architectural detail dwg.)

Sr. No. Item Description Unit Rate Total Amount

Sr. No. Item Description Unit Rate Total Amount

Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with

mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs

with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing screw down bib taps of following size. (A) Brass screw down bib tap polished

bright. (ii) 20mm dia.

Supply,Installing, tesitng and commissioning concealed forged brass lever operated ball valve of full

flow with forged brass ball (Machined to mirror smooth finish with hard chrome plated) and spindle

with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc.

including providing of connectors, flanges, nuts, bolts, gaskets, etc as per drawings, specification

and as directed by the Project Manager.

132 2.00 (iii) 50 mm dia Each 4,289.50

Fixing SS/Brass/Gun Metal Ball Valve, Ball valve must be having screwed ends. The ball valve

should be with stand with maximum pressure up to 16 Kg/cm2. Testing & installation of valve as

per drawing & spefication.

Fixing SS/Brass/Gun Metal Ball Valve, Ball valve must be having screwed ends. The ball valve

should be with stand with maximum pressure up to 16 Kg/cm2. Testing & installation of valve as

per drawing & spefication.

Fixing SS/Brass/Gun Metal Ball Valve, Ball valve must be having screwed ends. The ball valve

should be with stand with maximum pressure up to 16 Kg/cm2. Testing & installation of valve as

per drawing & spefication.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and

138 64.00 back nuts. Each 305.67

Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for culverts

including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S.

/ 1971 Class NP4 of following internal diameter.)

Constructing Bombay Pattern Type Catch Pit of size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick brick maso. wall in the prop. of CM (1:6) with 40 mm

thick IPS flooring in the prop M15 at bottom and 15 mm thick cement plaster inside the catch pit in

the proportion of CM (1:3) with out jali etc. comp. as directed.

CatchPit Jali Fixing P/F FRC catch pit jali with frame 600mm x 600mm clear opening etc. comp..

As directed by engineer in charge.

Total Amount of Civil & Plumbing Work

Total Amount of Civil & Plumbing Work

Ahmedabad Municipal Corporation

Proposed Construction of Shelter for Uraban homeless (Renbasera) in TP No.121, FP No. 163 (Naroda, Hanshpura, Kathvada) in Naroda Ward, North Zone,

Sarkhej Ward for Ahmedabad Municipal Corporation.

BOQ of Electrical Work

Sr. No. Description of Work Qty. Unit Rate Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/

on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic

front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Wiring for the light points as above but with IP66 Switch board with IP 66 Box and 6 Amp / 16 amp

2 E-2 Switch. 250 Volt one 6 A IP66 switch located on IP 66 box board of Legrand cat. No. 673000 & 684638 or 2.00 No 2,040.00

3 E-3 Primary light point controlled by one SP MCB ( Same as above item but controlling with SP MCB ) 2.00 No 525.00

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary

light with accessories erected on Metal / PVC box covered with 3 mm thick PC (Polycarbonet) / Acrylic sheet

for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are

of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and following type of

5 E-5 accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front 2.00 No 562.00

plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

6 E-6 Do as above but for Secondary light point controlled by same two way switch 2.00 No 192.00

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in /

flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type

7 E-7 electronic fan regulator with separately mounted and accessories with earth continuity of following type erected 60.00 No 632.00

on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected

on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box,

8 E-8 single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling 142.00 No 255.00

with following type accessories

Sr. No. Description of Work Qty. Unit Rate Amount

Do - As - Above but for 6 A x 5 pin 250 Volt switched socket outlet point at convenient location. ( Plug &

Switch can be together or at different location )

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of

wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with

10 E-10 appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of 20.00 No 704.00

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

Wiring for the 250 volts single phase and neutral 16 amps switched socket outlet with 4.0 sq.mm

FRLS flexible copper conductor 1100 volts grade wires of approved make with concealed or surface

11 E-11 mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 16 amps 5 pin switch 2.00 No 829.00

socket outlet of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and

the outlet box with 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

Wiring for the UPS / Comp. / Raw Power outlet with 2 nos. of 250 volts single phase and neutral 16 amps

switched socket outlet with 2.5 sq.mm x 3 core FRLS flexible copper conductor 1100 volts grade wires

of approved make in concealed or surface mounted Prelaid 25 mm dia medium gauge PVC Conduit / Race

ways including providing and fixing of 2 no's of 16 amps 5 pin switch socket outlet of approved quality color

make & design in 2 mm thick GI box and earthing of fixtures and the outlet box. ( Maximum 3 nos. of

Plugs can be looped in 1 Circuit )

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed

Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

14 E-14 Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness 350.00 Rmt 52.00

15 E-15 Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness 200.00 Rmt 64.00

MAINS : ( not for Point wiring )

Supplying and Laying of mains with Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/

1100 V with earth wires of Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires

with Suitable dia rigid PVC Pipe of Heavy Gauge ( Scope Also includes Supply of pipe. )

Supplying and Laying of 4 nos. of 10 sq mm Cu. FRLS flexible wires with 2 nos 4 sqmm Cu. FRLS flexible

wireswith 40 mm dia Pipe

Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible

wires with 40 mm dia Pipe

Supplying and Laying of 2 nos. of 4 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible

wires with 25 mm dia Pipe

Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS

flexible wires with 25 mm dia Pipe

Supplying and Laying of 2 nos. of 1.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS

flexible wires with 25 mm dia Pipe

Sr. No. Description of Work Qty. Unit Rate Amount

Distribution Board

Supply, Assembling, grouting, leveling Connecting & testing D.B of IP 54 of specified make.

Distribution Board-VTPN

Supply, Erecting, testing and commissioning of only VTPN D.B. with space for FPMCCB / FPMCB as

incoming and 4 TPMCB / SPMCB as outgoing per phase (i.e. 4 way VTPN D.B.) of Legrand Make Cat. No.

Distribution Board-TPN

Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming

and space for DPELMCB and 4 SPMCB as outgoing per phase (i.e. 8 way per phase D.B.) of Hensel Make

Distribution Board-SPN

23 E-23 Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and 2.00 No 3,860.00

8 SPMCB as outgoing per phase (i.e. 12 way D.B.) of Hensel Make KV9112M

Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and

4 SPMCB as outgoing per phase (i.e. 8 way D.B.) of Hensel Make KV7109M

All MCB's, ELMCB's, ELCB's should be of 10 KA only

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking

32 E-32 capacity & confirms to IS :8828 in existing box having following capacity 5.00 No 582.00

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking

33 E-33 capacity & confirms to IS :8828 in existing box having following capacity 10.00 No 641.00

(b) 40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking

34 E-34 capacity & confirms to IS :8828 in existing box having following capacity 8.00 No 590.00

6 to 32A FP MCB

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release

37 E-37 suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected 2.00 No 6,112.00

in existing 16 G.M.S. housing. .

ICS= 100% of ICU only.

Sr. No. Description of Work Qty. Unit Rate Amount

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with,

38 E-38 floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent 2.00 No 3,137.00

ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as directed.

39 E-39 25 Amp DP Dinrail Mounted Contactor 2.00 No 2,234.00

40 E-40 40 Amp FP Dinrail Mounted Contactor 2.00 No 3,674.00

41 E-41 SITC of IP65 Polycarbonate enclosure for DP MCB 2.00 No 1,882.00

42 E-42 SITC of IP65 Polycarbonate enclosure for FP MCB 2.00 No 1,995.00

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run

43 E-43 and backfilling the same and making the surface proper. Providing and erecting iron clad cable route marker 200.00 Rmt 55.00

duly marked with ELE.CABLE of size 23 cms.X 12 cms. Flushed with ground in cement foundation as directed

by Engineer in charge. The width shall be as per requirement

Covering of cable with second class bricks laid cover the cable crosswise & also on both sides with covering of

7. 5 Cms. layer of sand above & below cable (cable shall be laid in 0.9mtr.deep & 0.4 Mtr.wide trench). Where

there are more than one cable in the trench on either side of the cable, 5 Cms. over lapping of bricks shall be

Construction of brick masonry pulling chamber 600 mm x 600 mm inside clear size and depth up to 0.60 meter

with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM proportion of

15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum 200 mm thickness in

45 E-45 M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame and 600 mm dia cover 3.00 No 10,423.00

of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & clearing the site by removing

debris & Shifting of the debris & making site good As per the Instruction of the Engineer In charge complete in

Construction of brick masonry pulling chamber 750 mm x 750 mm inside clear size and depth up to 0.75 meter

with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM proportion of

15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum 200 mm thickness in

46 E-46 M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame and 750 mm dia cover 3.00 No 13,138.00

of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & clearing the site by removing

debris & Shifting of the debris & making site good As per the Instruction of the Engineer In charge complete in

Construction of brick masonry pulling chamber 1000 mm x 1000 mm inside clear size and depth up to

meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM

proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum 200 mm

47 E-47 thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame and 900 5.00 No 16,746.00

mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & clearing the site

by removing debris & Shifting of the debris & making site good As per the Instruction of the Engineer In

charge complete in all respect.

Fabricating the box type items made from M.S. Sheet with A.I. supports, wings, doors, handles other hardware

48 E-48 materials as per requirement design with finishing by three tank powder coating processed inside and outside 200.00 Kg. 179.00

painted, erected as directed including minor civil work.

Sr. No. Description of Work Qty. Unit Rate Amount

Supply, Installation, Testing, Laying, Commissioning of following 1100 volt grade XLPE insulated PVC

sheathed aluminum / Copper conductor armored cables as per (IS:7098)(I)-88 ISI marked & specification in

49 E-49 trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing 50.00 Rmt 282.00

bolts, connecting testing and commissioning with identification tags at every 10 mtr. & Both ends. with All the

fixing accessories, excavation Back filling & Cable protection with Bricks as per the drawing ( If required ).

50 sq.mm x 3.5 c Al. XLPE Arm. Cable

50 E-50 25 sq.mm x 4 c Al. XLPE Arm. Cable 80.00 Rmt 189.00

51 E-51 16 sq.mm x 4 c Al. XLPE Arm. Cable 100.00 Rmt 152.00

52 E-52 10 sq.mm x 4 c Al. XLPE Arm. Cable 250.00 Rmt 139.00

53 E-53 6 sq.mm x 4 c Cu. XLPE Arm. Cable 100.00 Rmt 505.00

Providing & erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand copper conductor for 1.1 KV. To be

laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size cable.

6 sq.mm x 3 c cu. XLPE Arm. Cable

Providing & erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand copper conductor for 1.1 KV. To be

laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size cable.

4 sq.mm x 3 c cu. XLPE Arm. Cable

56 E-56 Supply & Laying of 1.5 sq mm x 3 core round flexible wire in prelaid pipe / Raceway. 50.00 Rmt 46.00

57 E-57 Supply & Laying of 2.5 sq mm x 3 core round flexible wires in prelaid pipe / Raceway. 75.00 Rmt 77.00

58 E-58 Supply & Laying of 4 sq mm x 4 core round flexible wires in prelaid pipe / Raceway. 30.00 Rmt 175.00

Cable Termination

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor

59 E-59 armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, double 2.00 No 150.00

compression type Brass glands with earthing.

50 sq.mm x 3.5c Al. XLPE Arm. Cable

60 E-60 25 sq.mm x 4 c Al. XLPE Arm. Cable 2.00 No 111.00

61 E-61 16 sq.mm x 4 c Al. XLPE Arm. Cable 44.00 No 107.00

62 E-62 10 sq.mm x 4 c Al. XLPE Arm. Cable 16.00 No 90.00

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor

armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, double

compression type Brass glands with earthing.

6 sq.mm x 4 c Cu. XLPE Arm. Cable

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor

armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, double

compression type Brass glands with earthing.

6 sq.mm x 3 c Al. XLPE Arm. Cable

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor

armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, double

compression type Brass glands with earthing.

4 sq.mm x 3 c Al. XLPE Arm. Cable

Sr. No. Description of Work Qty. Unit Rate Amount

SITC of Round Flexible wire end termination of the following insulated PVC sheathed copper conductor Wires

of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, IP66 / 67 - 3 mm thick

Thermoplastic long entry glands of Hensel / Spelsberg with Strain relief and Lock nut.

1.5 / 2.5 Sq. mm x 3 / 4 core round flexble wire or Similar dia wire

67 E-67 4 / 6 Sq. mm x 3 / 4 core round flexble wire or Similar dia wire 4.00 No 51.00

MV Switchgear & Power Panels

Supply, Unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning

main L.T. panel board, fabricated from M.S. sheet & folded channel totally enclosed cubical type

compartmentalized. Scope Covers Unloading at Site, Store in Weather Proof Condition, Shift to the Location

Basement / GF / FF, Grouting, Installation, Testing & Commissioning complete in all respect & As per the

instruction of Architect / Consultant / Engineer Incharge. Scope also covers Co ordination with Panel

Design, fabrication, assembling, supply, installation , testing of Panels for 415 V, 3 phase, 50 Hz, 4 wire power

Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form

4b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate,

shall be provided both at the top and the bottom of the panel.

All large panels shall be provided with lifting hooks. Distribution panels shall be fabricated in accordance with

the specifications.

Note : Panel vendor has to provide Surge Protection at every stage of the Distribution.

1) Supporting rigid steel framework.

2) Cubicle type, 14 gauge CRCA sheet steel enclosed.

3) Complete with interconnections and distribution bus bars.

4) Proper bonding to earth.

5) Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its

circuit diagram.

6) Providing cable clamps / supports within distribution boards cable alley.

7) TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.

8) All MCB’s shall be of minimum 10 KA breaking capacity.

9) The breaking capacity of MCCB’s are mentioned panel wise.

10) All motor feeders MCCBs shall be of motor duty.

11) Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.

12) Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.

a) IP 52 for indoor panels.

b) IP 54 for Service area panels.

c) IP 65 for outdoor panels.

13) All MCCB’s shall be provided with operating mechanism for door interlock & with the roraty handle.

14) Current density of aluminium shall be 1 sq mm for 0.8 amps for rated current of bus bars and current

density of copper shall be 1 sq.mm for 1 amps for rated current of bus bars.

15) Tinned copper earth bus as specified in the BOQ / SLD shall be provided through out the length of each

16) All measuring instruments (Meters) shall be of digital electronic with LED of approved make and

compatible with BAS.

17) All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire.

Sr. No. Description of Work Qty. Unit Rate Amount

18) All panels shall have provision of the following:

a) IP 55 for outdoor panels.

b) Pad locking of MCCB’s handles in “OFF” Position.

19) Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for

BAS including space required for various transducers in Main Switch Board sections. Only transducers shall be

supplied by BAS contractor.

20) All the C.T.s should be auto short link type.

21) All the MCCB's should be with rotary handle.

22) All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and

inductive (motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall be of type D

characteristic.

23) All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier

24) All PTs / control transformer shall be provided with centre tap earth secondary.

25) If Any descripancy found in SLD & BOQ, it should be brought in the notice of the Client / Consultant,

Client / Consultant's decision will be final in case of any descripancy.

26) All outdoor panles should be provided with minimum 600mm height fabrication stand with all side 2mm

thick M.S. powder coated sheet.

27) G.A. Drawing should be checked & Finalised by consultant before fabrication.

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release

68 E-68 suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected 2.00 No 6,112.00

in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin

proof having hinged door with rubber gasket and necessary busbar supports with COPPER busbar having

current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

insulation tape for phase sequence, three phase & neutral each suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of required size with necessary connections.

(A) Suitable for 63/100 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos.

of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected

with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

(A) Suitable for 100 Amp. Capacity

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected

with necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials connected to the meter

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display,

73 E-73 to 750 AC Volts range erected on existing panel board with all connection, wiring etc .with manufacturers 4.00 Each 1,263.00

calibration certificate.

Sr. No. Description of Work Qty. Unit Rate Amount

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display,

74 E-74 external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing 4.00 Each 1,543.00

panel board with all connection, wiring etc .with manufacturers calibration certificate.

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt

trip 220V AC. with all internal connections & complete erected in existing M.S.housing..

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing

measurement of following Voltage, Frequency, Apparent energy, Apparent power, Active and reactive energy,

Active and reactive power, Average voltage Vavg, Peak demand power PM, QM, SM, Demand power P, Q, S,

Apparent power S, S1, S2, S3, Unbalance current, Power factor and displacement PF (signed, four quadrant),

77 E-77 Calculated neutral current, Active, reactive, apparent energy (signed, four quadrant), Active power P, P1, P2, 2.00 Each 13,984.00

P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current Iag, Peak demand currents, Reactive

power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz, 40...300

V DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red,

Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical

panel board necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts,

78 E-78 foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and 4.00 Sq. Mtr. 14,755.00

rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following approved manufacturers with

following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

(i) with 350mm depth

79 E-79 (ii) with 550 mm. Depth 3.00 Sq. Mtr. 19,196.00

80 E-80 (iii)with 750 mm. Depth 8.00 Sq. Mtr. 33,230.00

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of following capacity for

switch On-Off street lights on time scheduling basis made from 16G CRCA sheet duly epoxy power painted

inside and outside with hinged doors and locking arrangement consisting of suitable size of 4 Pole MCB and

pole contactor (cat-III)with analog time switch, auto manual switch of same make and suitable input and output

Bakelite terminals and with door earthing approved by Engineer in charge.

Sr. No. Description of Work Qty. Unit Rate Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

83 E-83 Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 131.00 No 370.00

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet, Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

84 E-84 Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 5.00 No 530.00

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet, Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD

< 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting

clips complete.IP20

(i) 5-9 watts,Surge-2 KV

Sr. No. Description of Work Qty. Unit Rate Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD

< 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting

clips complete.IP20

(iii) 16-20 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

88 E-88 efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 25.00 No 4,948.00

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection.

(ii) above 48 to 60 Watts

89 E-89 (iii) Above 60 to 90 watts 5.00 No 5,917.00

Providing and erecting PVC body surface or pendent mounting LED Bulk type 9 watt Lighting Fitting with

electronic driver. And lumen output from luminaire 720lm , input voltage range 90-300VAC , 50Hz cool

white(3000 to 6500k), inbuilt driver, -20degC to +60degC working temperature, AL frame with Beam Angle

Sr. No. Description of Work Qty. Unit Rate Amount

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

91 E-91 efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 5.00 No 7,195.00

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-

(iv) above 90 to 120 watts

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-

92 E-92 voltage 5.00 No 10,711.00

(vii)above 200 to 250 watts

93 E-77 Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM 60.00 Nos. 1,687.00

with square frame ABS body with inbuilt lowers & square frame.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted

94 E-78 low noise operation suitable for medium duty having following dia size and maximum speed in RPM 5.00 Nos. 2,034.00

[A] 305 mm dia 900 RPM

95 E-79 Providing suitable M.S. louver shutter of the Exhaust fan. 65.00 Nos. 365.00

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt

96 E-80 A.C.50 Hz. 1200 mm sweep complete having 4 blades Aluminium body and blade sets having ornamental 60.00 Nos. 2,335.00

design shanks, canopy erected with earthing [ Make shall be approved by Engineer in Charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for

fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

Supplying and erecting approved make Conical Pole (Standard ) Made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759 with required base plate

and integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm

Din-Rail for MCB Mounting, stud type terminal and arrangement for cable terminationas erected on suitable

foundation (included) with necessary GI nut-bolts/J-Bolts. as per details given by manufacturer considering site

requirement.The length of poles are as below.

(B) 4 Mtr. Long 65mm Top X125 mm bottom dia, 3mm thickness.

99 E-83 (D) 6 Mtr. Long 65mm Top X155 mm bottom dia, 3mm thickness. 10.00 Nos. 8,670.00

Supplying and erecting Street light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for fixing the brackets and having spread of

100 E-84 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple with check nut 8.00 Nos. 487.00

complete painted with one coat.of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint

with following nos of arms.

[A] Single Arm bracket 0.5 Mtr

101 E-85 [B] Double Arm Bracket 0.5 Mtr 1.00 Nos. 616.00

Sr. No. Description of Work Qty. Unit Rate Amount

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal

duly plastered with necessary curing for pole muffing or any other purpose.

103 E-87 TMT Bar for Pole Foundation 150.00 Kg. 75.46

Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared

earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia.

G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para

104 E-88 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug 2.00 Nos. 7,797.00

to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with

end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following

60 x 60x 0.315 cms. Copper earth Plate

105 E-89 45 x 45 x 0.35 cms. C.I. earth plate 2.00 Nos. 2,543.00

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of applications.

For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil

i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Earth wire/strips :

Supply and laying cu. earthing strips for interconnecting the earthing stations, panels, DB's etc. in built up

trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with : fixing

Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes.

Providing and erecting HOT deep Galvanized strip iron wire 8 to 16 S.W.G.

110 E-94 No.8 gauge bare cu. earth wire 25.00 Kg. 815.00

111 E-95 Earth Link : 40mm x 6 mm earth link fixed by necessary screws on wall. 2.00 Mtrs. 370.00

SITC of Water Tight Junction Box With necessary clamp for mounting of the J.B. ( All the cable / wire

connections to the JB shall be with the Water tight Glands only )

Telephone Outlet Point

SITC OF PowerCat 6 DataGate Jack, 568A/B - Yellow with Dust Cover / Blank/ One Telephone Point to be

113 E-97 done with Cat -6 Information outlet Socket, Back Box, Face Plate for all telephone point. Average Length to be 4.00 Nos. 159.00

considered as 50 Meter. Cable Laying, Labling, Ferrule, Testing, Certification to be included in cost. 20 Years

of Certification is required. Test reports of Level-4 Scanners only.

SITC OF DG+ Jack (Diecast)Cat6A 568A/B, Shtd- Black (Information Outlet for Data) with Faceplate, back

114 E-98 box CAT-6A standards. Cable Laying, Labling, Ferrule, Testing, Certification to be included in cost. 20 Years 2.00 Nos. 159.00

of Certification is required. Test Reports of Level-4 Fluke Scanners Only.

Sr. No. Description of Work Qty. Unit Rate Amount

SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA-568C Category-

6, Installation and Termination of all 24 nos. Catergory-6 UTP , unloaded with individually replaceable 24 nos.

Category-6 I/O Jacks complying with TIA-568.C.2, as per given jack specification Shall be suitable for loading

unshielded & shielded jacks for different category systems (CAT 6 & CAT 6A)

Supply and laying of PowerCat 6A U/FTP CM 4 Pair Cable, LSZH Sheath - Violet of specified make to be

done in prelaid PVC pipe of 25 mm dia / raceway of specified make, but without the cost of raceway or pipe

(the wire is to be drawn from HUB \ Switch of respective area to outlet point) with the cost of the crimping with

material of make Legrand / Molex/ Systimax / Panduit / Siemon

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost

charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having

operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power

factor with battery, over/under voltage output with over load & short circuit protection equipment. The system

housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand,

10% Overload capacity for momentary load.

(D) 5 KVA with 1Hr Backup

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps

118 E-125 made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. 2.00 Nos. 6,526.00

For 4.5 Kg Capacity, including maintaining/ renewal validity of all Co2 fire extinguisers up to the completion of

119 E-126 Supplying & Erecting automatic emergency light with maintenance free battery for 20 watts tube. 2.00 Nos. 3,900.00

Supplying rubber matting of following thickness as per IS : 15652/IEC61111

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected

Providing printed instruction chart both in English and Gujarati and duly framed with front glasses, for

treatment of person suffering from Electric shock

Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II ) Anti

Rodent type with necessary connecting accessories of same material at required depth for laying of cable.

below ground / road surface for enclosing cable and backfilling the same to make ground as per original.

Providing & Erecting full SS Body (SS 304) Split type water cooler having storage capacity 160 to

Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet temp. of the

water should drop by 150C within a hour,The water cooler should be comprising of hermetically sealed

Reciprocating compressor with R134A, fan motor, Copper Condensing unit,water tank surrounded by

evaporating coil, thermostats, relay etc.complete with necessary copper tube & Insulation, M.S Chanel Stand

with Painting for water tank & M.S. Powder Coated Stand for Outdoor unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core Cord for connection.

Sr. No. Description of Work Qty. Unit Rate Amount

Supplying and erecting water filter cum purifier with ultra violate technology. (Aquaguard / waterdoc model or

equivalent symphony/ crystal/videocon model)

S.I.T.C. of single phase submersible pump set suitable for 100 mm size or more dia bore well having motor

capacity and discharge as under with necessary panel box. Lifting and Lowering taken extra.

(c) Motor rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head suitable for 32 mm dia.

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing as per instruction

129 E-136 of Engineer in charge on site complete with wiring connection with existing wires , with copper conductor from 1.00 Nos. 2,332.00

pump to upper and lower tank.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable

130 E-137 approved make of following Size. 20.00 Mtrs. 103.00

(B) 3 Core x 2.5 Sq. mm.

Liason / Follow UP with Supply Co.

Filling the necessary application to supply co. following up and getting the supply filling the necessary test

report to the supply co. inclusive. All official fees including security deposits will be paid by the client and out

of pocket expenses shall be of contractor.

Machine room Less LIFT

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main

[1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift duty 3 phase 440 V A. C. Permanent

magnetic synchronous motor of proper rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVF, vector control drive with encoder feedback closed loop system shall

be used for lift car and door operation which shall be full collective selective operation hall call demand

response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety

132 E-139 [3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with 1.00 Nos. 15,60,017.00

safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S.

finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with choice of

colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical

door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with

brail language as per lift act.

[4] All landing doors shall be fully automatic centre opening/ telescopic opening made of hairline finish steel

grade of 304 with key holes and infrared curtains with Unlocking facility from outside.

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided

inside the car and at all floors.

[7] Full height infra red curtain with multiple criss / crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity.

[9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till

excess load is removed.

Sr. No. Description of Work Qty. Unit Rate Amount

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan with automatic sleep timer shall be provided.

[12] Voice annunciater with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in control panel.

[14] Mechanical over speed governor, door key holes in the floor doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be

provided by the lift agency, along with the other steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by

engineer in charge.

[17] Permanent wiring in lift machine room and lift well with proper numbers of light points, with fixtures,

exhaust fan and plug points shall be provided by the agency. Power supply of 3 phase 440 V shall be made

available by department in lift machine room.

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of

lift shall be made by lift agency without any extra cost.(granite/marble fixing around all landing door openings

are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities.

[20] As per statutory requirement of Got. Of Gujarat lift & escalator act 2000, lift

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and provide report by third party authorized

by concern licensing authority 5.agency has to provide third party insurance upto completion of free

maintenance period and submit the document for the same.

[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly

visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall Panels in Lift Car.

agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor

Note: 1 - Advanced control system dual 32bit embedded microprocessor with CANBUS Serial Communication

mode including Regenerative power efficient operation on site programming facility,Anti nuisance,Pre-

opening,BMS/RMS system supporting hardware & Software.

2. Floor indication LCD Display with call registration & brail mark with arrival gong and hall lantern & TFT

Screen in the car with MP3 Voice Announcer.

3. CAR PANEL should be scratch resistive SS Moonrock finish for car and all Doors, All landing doors must

have fire rating up to 1 hours and car door must have multi-level crisscross beam door protection.

4. To & Fro communication system & wiring (i.e. car, control room, guard room)

8 / 10 Passengers, Ground plus 3 upper floor with Rated Speed of 1.0 m/sec.,

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

Total Cost of Electrical Work

Ahmedabad Municipal Corporation

Proposed Construction of Shelter for Uraban homeless (Renbasera) in TP No.121, FP No. 163 (Naroda, Hanshpura, Kathvada) in Naroda Ward,

North Zone, Sarkhej Ward for Ahmedabad Municipal Corporation.

BOQ of ELV Work

Sr. No. Description of Work Qty. Unit Rate Amount

Supply, Installation, Testing & Commissioning of Network TDN IR Mini Dome Camera, 1/2.9" CMOS, 5 MP

@ 25fps, Triple stream, Min. Illumination required 0.25 lux @ color, WDR 120dB, Min. Pixels 2560 x

Shutter Speed 1/30000 - 1/5; Adavance Video Compression technology such as H.265 / H.264 / MJPEG,

3mm~8mm, MFZ lens, HLC, 3DNR, Minimum Edge Intelligence Video Analytics: Motion Detection, Camera

Tampering, Intrusion/Object enter area; 4 nos Privacy Mask, Smart IR with upto 30m IR distance, AES-

128/256, PCI Data Security Standard compliance, 128GB SD card support, DC12V, PoE (IEEE 802.3af) (Class

2), IP 66, IK10, Having Operating temp range : –10°C to 50° C. Certifications: ONVIF Profile S, G compliant,

UL, CE/EN, FCC Part 15 & RoHS compliant along with mounting brackets suitable for Cieling / Wall

mounting & required accesories as per site requirement.

Supply, Installation, Testing & Commissioning of 5MP IP Network TDN IR Bullet Camera, 1/2.8" CMOS,

MP @ 25fps, Triple stream, Min. Illumination required 0.05 lux @ F1.4 (color), WDR>120dB, Min. Pixels

2560 x 1920, Shutter Speed 1/30000 - 1/30; Adavance Video Compression technology such as H.265 HEVC /

H.264 / MJPEG, Smart Codec, 2.7-13.5 mm 5X motorized focus & zoom lens, P-IRIS, HLC, 3DNR, Minimum

Edge Intelligence Video Analytics: Motion Detection, Video Tampering, Intrusion, Loiter, Line crossing,

Unattended object, Missing object, Face detection; 5 nos Privacy Mask, 4 IR LEDs Smart IR with upto 60m IR

distance, Stream encryption, AES-128/256, PCI Data Security Standard compliance, FIPS Chipset Built-In,

256GB SD card support with SD card encryption, Dual channel Audio G.711a / G.711 Mu / G.726, Alarm:

In/ 1out, In-built Heater; PoE+ (802.3 at) and 12V DC/24V AV; IP 66 / IP 67 / NEMA 4X, IK10, Having

Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S, G compliant, UL, CE (EN 50130-4 &

EN 55032) , FCC Part 15 & RoHS compliant along with mounting Brackets suitable for Pole / Wall mounting

& required accesories.

SITC of 32 Channel NVR having features smart H.265+/H.265/ Smart H.264/H2.64/MJPEG, Max 320 Mbps

3 incoming Bandingwidth, support min 2 SATA HDDs Slot - each slot supporting min 8TB, Up to 12 MO 1.00 Nos. 64,975.00

Resolution for Preview and Playback and with 8 TB Survellance Hard Disk

Supply, Installation, testing and commissioning of Intel Core i5 12C Processor 25M Cache, up to 4.90 GHz /

4 16GB DDR5 / 512 SSD / Win 10 Pro Operating System / No Monitor / DVD RW / 3 Yrs NBD / PS 500W/ 1.00 Nos. 75,900.00

NVIDIA T600 4 GB GDDR6 Workstation Graphics Card including 4 mDP to DP adapters

SITC of 32 Inch 500 NTS Brightness professional Display with Direct-Type LED, Viewing Angle : 178 Degree

Verti, 178 Degree Hor. Operation 27x7, Native Resolution 3840 x 2160 (16:9) - UHD, 4 x USB (2 x 2.0, 1 x

5 2.0 internal, 1 x Type C), 0-40°C, ≤0.5 W, HTML 5 Browser Opera(4.9), Yes(internal) IEEE 802.11 a/b/g/n 1.00 Nos. 50,000.00

WiFi certificated, BIS, YES CLASS A 3dB margin. (Including Five year free maintenance with guarantee)

Networking Enclosures & Accessories Supply, Installation, Testing & Com mission ingot 24U Wall mount

6 closed rack with front glass door, fan tray on top, perforated rear doors, keyboard tray with shelf. Casters & 2 1.00 Nos. 51,316.00

nos vertical power strip with std etc as required.

Supply, Installation, Testing And Commissioning of Layer 2 Managed Gigabit POE switch with 24 #

10/100/1000BaseT ports and 2 # Gigabit Combo ports(RJ45/SFP), 2 # Gigabit SFP Port.

Sr. No. Description of Work Qty. Unit Rate Amount

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

9 Supply and laying of Cat-6 STP LSZH UV outdoor cable in PVC conduit with termination as per TIA 200.00 Mtrs. 113.00

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(4) TV Co-axial Socket outlet

Total Cost of ELV Work

Ahmedabad Municipal Corporation

Proposed Construction of Shelter for Uraban homeless (Renbasera) in TP No.121, FP No. 163 (Naroda, Hanshpura, Kathvada) in Naroda Ward, North Zone, Sarkhej Ward

for Ahmedabad Municipal Corporation.

BOQ of Fire Fighting and Fire Detection System Work

Sr. No. Item Description Qty. Unit Rate Amount

A Fire Pump Room & Accessories (positive Suction)

Supplying, Installation, Testing and commissioning of Electric driven Main Fire Hydrant pump suitable for automatic

operation and consisting of following: Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller,

mechanical seal to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 96m3/Hour@

70M. head with M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required

Supplying, Installation, Testing and commissioning of Diesel engine driven fire pump suitable for automatic operation and

consisting of following: Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller , mechanical seal to

ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 96m3/Hour@ 70M. head

conforming to IS 1520. with M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required

Supplying, Installation, Testing and commissioning of Jockey Pump 10.8M3/hour @70M Head.Horizontal Centrifugal End

Suction. with M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required

Supplying, Installation, Testing and commissioning of cubical type floor mounted power cum Fire Pump control panel

complete with suitable switch gear, bus bars, relays, contractors, indicating lamps, fuses, instruments manual isolator & auxillary

switch including connections complete as required.(Contractor should submit GA Drawing for approval before deliver the Panel

5 Providing, fixing, testing and commissioning below Caballing work for Fire Pumps (Only from Panel to Pumps)

5.1 3 C X 35 Sqmm Alluminium Armoured 60.00 Meter. 399.00

5.2 3 C X 16 Sqmm Alluminium Armoured 30.00 Meter. 223.00

5.3 2 C X 1.5 Sqmm Copper Armoured. 150.00 Meter. 150.00

5.4 Perforated G.I.sheet cable tray Cable Tray .200X50mm . 20.00 Meter. 588.00

5.5 Perforated G.I.sheet cable tray Cable Tray .100X50mm . 20.00 Meter. 406.00

6.0 Providing, fixing, testing & commissioning of Glicerin Filled 100mm dia dial type Pressure Gauge and range of 0-15 Kg/cm2 6.00 Nos. 2,100.00

Providing, fixing, testing & commissioning of Pressure Switches for automation of fire pumps. Pressure switches shall be

7.0 double pole single throw type suitable for 3 phase supply with diaphragm. Aluminum Enclosure with IP 66 protection as 4.00 Nos. 2,380.00

Supplying, Installation, Testing and commissioning of Air vessel fabricated from 8mm MS plate with dished ends,dia of 350 mm

and height 1500 mm with suitable supporting legs, outside painted with one coat of primer and two coats of synthetic enamel

paint of approved shade, complete with one 25mm dia connection from pump delivery, one 25 mm drain with valve. Complete as

per technical specification & drawing details.

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve conforming to I.S:13095 class PN 16 rating with

Fittings, Flanges, Nutbolts, Washers, Gaskets etc.of size:

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-Return Valve class PN 16 rating with fittings,

flanges, nutbolts, washers, gaskets etc.of sizes:

Sr. No. Item Description Qty. Unit Rate Amount

11 Supply, Installation, Testing and Commissioning of S.S. Ball Valves with all fittings required.

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C Class Heavyduty pipes as per IS: 1239 (upto

150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting, screwing, welding etc. and providing all fittings like

flanges, bends, tees, elbows, reducers, clamps, hangers etc. with painting of one coat of primer and 2 or more coats of synthetic

enamel paint of approved make / shade complete as per specification.

12.5 50mm dia 6.00 Meter 1,237.00

12.6 25mm dia. 6.00 Meter 595.00

13.0 Supplying, installing and commissioning of of "Y" Type Strainer

B Fire Hydrant System piping & Accessories

Providing, fixing, testing and commissioning of Above Ground M.S. ERW Black C Class Heavyduty pipes as per IS:

(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting, screwing, welding etc. and providing all

fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per specification.

Providing, fixing, testing and commissioning of Under Ground M.S. ERW Black C Class Heavyduty pipes as per IS:

15.0 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) with IWL/pypecoat, 4mm thickness wrapping and coating and

providing all fittings like flanges, tees, elbow, fasteners with all required.

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve conforming to IS:13095 class PN 16 rating with

Fittings, Flanges, Nutbolts, Washers, Gaskets etc.of size:

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-Return Valve class PN 16 rating with fittings,

flanges, nutbolts, washers, gaskets etc.of sizes: 100mm dia

18.0 Fire Fighting Equipement

Providing, fixing, testing and commissioning of SS Single Headed Oblique Pattern Hydrant Landing Valves as per IS:

with 80 mm dia flanged inlet & 63 mm dia female outlet complete with cap and chain etc.

Providing, fixing, testing and commissioning of SS Branch Pipe with nozzle of 25 mm nominal bore outlet suitable to fit with

standard instanteneous type 63 mm dia coupling. As per IS:903

Providing, fixing, testing and commissioning of 63 mm dia 15m long RRL Hose Pipe with 63 mm dia.Type A Male and female

Stainless Steel couplings duly binded with GI wire, rivets etc. conforming to IS 636 as required.

Providing, fixing, testing and commissioning of weather proof standard fire Hose Cabinet wall mounting type 18 Guage. (750 x

600 x 250) having Double Opening with M.S. fabricated stand, necessary locking arrangement by allan key.

Providing, fixing, testing and commissioning of Wall mounting Fix type First aid Fire Hose Reel with drum, hanging bracket,

36.6 M x 25 mm dia high pressure hose reel tubing as per IS:884 with shut nozzle and ball valve and all required accessories.

Sr. No. Item Description Qty. Unit Rate Amount

Providing, fixing, testing and commissioning of CI Four way Fire Brigade Inlet as per IS: 904 having 63 mm dia inlet with

mm dia Butterfly valve blank cap and chain with necessary fittings, flanges, nutbolts etc. (For System filling & Tank Filling)

Providing, fixing, testing and commissioning of Two Way Fire Brigade Inlet for Draw Out Connection with 100mm dia Foot

Valve. blank cap and chain with necessary fittings, flanges, nutbolts etc.

Providing, fixing, testing and commissioning of 25 mm dia Air Release Valve and Ball Valve assembly on top of each riser for

Air release system.

Supplying, Installation, Testing and commissioning of ABC type 6 Kg Fire Extinguisher Mono Ammonium Phosphate Powder

19.0 50, Stored Pressure Type, Pressure Gauge, Controllable discharge mechanism Class A, Rating 3A & Class B rating 21B as per IS 19.00 Nos. 1,050.00

15683 ISI MARK (ABC Dry Chemical Powder - MAP 50%).

Providing & fixing of CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS 15222 with controll

20.0 discharge mechanis, fitted with Hose & Horn applicable on Class B fire rating 21B confirms to IS 15683 bearing ISI mark. Co2 19.00 Nos. 4,410.00

cylinder as per IS

Providing & fixing of Mechanical Foam 9 Ltrs. Stored Pressure Type Controllable discharge mechanism applicable on Class A

& B Fire Rating 2A & 21 B

22.0 Providing & fixing of Wet chemical K type Fire Extinguisher of capacity 6 kg. 3.00 Nos. 14,644.00

23.0 Providing, fixing, testing and commissioning of below Auto Glow Signages.

23.1 Emergency Exit 4” X 12” 17.00 Nos. 400.00

23.2 Fire Fighting Equipements .8” X 12” 7.00 Nos. 480.00

23.3 Fire Extinguisher 4” X 12” 19.00 Nos. 400.00

23.4 Fire Lift 4” X 12” 4.00 Nos. 400.00

23.5 In Case Of Fire Do Not Use Lift Use the Stair .8” X 12” 4.00 Nos. 480.00

C Automatic Fire Sprinkler System.

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C Class Heavyduty pipes as per IS:

(upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting, screwing, welding etc. and providing all

fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per specification.

24.6 40mm dia. 60.00 Meter 934.00

24.7 25mm dia. 66.00 Meter 595.00

Providing, fixing, testing and commissioning of Under Ground M.S. ERW Black C Class Heavyduty pipes as per IS:

25.0 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And above) with IWL/pypecoat, 4mm thickness wrapping and coating and

providing all fittings like flanges, tees, elbow, fasteners with all required.

Providing, fixing, testing & commissioning of C.I.Butterfly valve conforming to IS:13095 class PN 16 rating with Fittings,

Flanges, Nutbolts, Washers, Gaskets etc.of size:

27 Sprinkler System Equipements.

Providing and fixing, testing and commissioning of K 5.6 Pendent type Standard response Sprinkler rating of 68 deg.C. with

required accessories.

Providing, fixing, testing and commissioning K 5.6 Upright Sprinkler Standard response rating of 68 deg.C . with required

Sr. No. Item Description Qty. Unit Rate Amount

Providing and fixing, testing and commissioning of K 5.6 Side Wall type Standard response Sprinkler rating of 68 deg.C. with

required accessories.

Providing, fixing, testing and commissioning of SS Flexible drops 1200mm Long.Unbraided, Maximumm Service pressure

27.4 175PSI, Sprinkler Flexible Drop system is a ready to use assembly to fit sprinkler heads in desired location in a suspended ceiling. 1.00 Nos. 1,056.00

It easily positions the sprinkler in center of the ceiling tile at a correct height.

28.0 Supply, Installaton of Structure Steel Support 1,500.00 Kg. 146.00

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

29.0 Getting of Fire Fighting System Approval from local fire authority with all other charges and documentations for getting No 1.00 Job. 2,00,000.00

Objection Certificate (NOC, FSPA/Opinion).

Fire rated steel doors with steel frames as per BS:476 (20&22), IS 3614 (Part-2) for stability and integrity. pressed Galvanized

steel conforming to IS 277 with the following specification. recommended fire door shell have doors tested at CBRI for maximum

rating of 120 Minutes.

Door frame shall be Single rebate profile of size 105 x 57 mm made out of 1.60mm (16gauge) minimum thick galvanized steel

sheet. Frames shall be mitered and field assembled with self-tabs. All provision should be mortised, drilled and tapped for

receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with

back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should

be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening.

30.0 Door leaf shall be 46mm thick fully flush double skin door. Door leaf shall be manufactured from 1.2mm (18guage) minimum 5.00 Sqmtr 35,000.00

thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate

hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate

hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a

bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf.

Vision lite wherever applicable should be provided as per manufacturer's recommendation with a beading and screws from inside.

The glass should be 6mm clear borosilicate fire rated glass of relevant rating of the door.

All doors and frames shall be finished with polyurethane aliphatic grade paint of approved color. The door leaf and frame shall

have passed minimum 250 hours of salt spray test. Rate should include supply and installation of door and hardware set as

mentioned in the door. Hardware Fittings Make :- Doorma , Geze , Hafales etc.

Fire Detection System

Supply, Installation, Testing And Commissioning of UL864, 10th Edition Microprocessor based 1 loop, True Peer-to-Peer

Networkable Addressable Fire Alarm Control Panel with minimum 50 characters LCD display, 2000 event plus 500 alarm log

history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering

20% spare capacity in each loop. Each loop shall have a capacity of minimum 50 analog addressable devices. The panel shall

work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels,

flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours

normal working and 30 mins in alarm condition. The panel shall be compatible with Integrated 8 channel Digital Voice

Evacuation System Controller capable of broadcasting Evacuation Messages on same peer-to-peer Network and 2 ways

Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories.

Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of

having minimum 5 Telephones in conference in multiple FFT Risers.

Sr. No. Item Description Qty. Unit Rate Amount

Supply, Installation, Testing And Commissioning of UL Listed Graphics User Interface for Monitoring & Control of complete

Fire, Voice Evacuation & Telephone Talkback System. The GUI based main network software shall network with other panels on

True Peer-to-Peer network. It shall be capable of graphically representing each facility being monitored with floor plans and icons

depicting the actual locations of the various systems, and / or sensors’ locations. It shall have the facility to change the sensitivity

of any detector. The software shall be capable of monitoring 100 Nodes with 100 Mbps Transmission rate on Fibre Optics

32.0 Network and 12 Mbps Transmission on cable and 1,00,000 network points. The software shall be capable to Monitor & Control 1.00 Nos. 35,000.00

all the Digital Voice Evactuation as well as 2 way communication from main control room using voice signals over Fire Network

along with the Fire detection signal. The Graphic workstation shall act as an independent node communicating on the peer to peer

network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of

Supply, Installation, Testing And Commissioning of Automatic printer capable for interface with NCS and provided with RS

33.0 232/RS 485 protocol port. It shall be standard cartage with 80 characters per line as per all requirements of technical 1.00 Nos. 19,880.00

specifications & contracts works.

Supply, Installation, Testing And Commissioning of UL268, 7th Edition Addressable Multi-criteria Photo-Thermal Detector with

sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal

of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall

34.0 also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the 50.00 Nos. 5,344.00

characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive

phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary

decimal switches.

Supply, Installation, Testing And Commissioning of UL listed Addressable Manual Call Point (Pull down / Break Glass Type).

35.0 The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the 2.00 Nos. 3,446.00

Supply, Installation, Testing And Commissioning of UL Listed Sounder cum Strobe rated at 80 dBA @ 3m for Audible

annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed

Supply, Installation, Testing And Commissioning of Addressable Control Module for Sounders / Strobes / Sounder cum Strobes.

The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in

normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary

decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.

Supply, Installation, Testing And Commissioning of UL Listed Isolator Module for Isolating short / dewired / loose circuits with

automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each

detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the

heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance

Supply, installation, testing & Commissioning of Battery pack suitable for back up of 4 hours with charger in case of Alarm

40.0 Supply, installation, testing & Commissioning of response indicator 2.00 Nos. 583.00

41.0 Supply, installation, testing & Commissioning Fire Exit Signage boards with 3hrs battery backup 4.00 Nos. 6,247.00

42.0 Supply & laying of 2 Core X 1.5 sq.mm. FRLS Armoured PVC Insulated copper cable 250.00 Mtrs. 186.00

43.0 Supply & laying of 4 Core X 1.5 sq.mm. FRLS Armoured PVC Insulated copper cable 50.00 Mtrs. 255.00

Sr. No. Item Description Qty. Unit Rate Amount

Non Comprehensive Quarterly Maintenance service charge for Fire Fighting System including servicing of fire fighting

system with cleaning ,oiling and Greasing of fire fighting equipment's, give live demonstrations And performing live mock drill

once in a year of the system after completion of DLP.

Quarterly servicing and maintenance will be done for Fire Fighting systems.

a) To check & Maintain the Fire Fighting System as per Installation done.

b) Checking of Butterfly valve , NRV, Ball valve for smooth operation.

c) Checking of Fire Brigade Inlet.

d) Visually check of Sprinklers for Leakage.

e) Fire Extinguisher to be checked physically.

f) Testing of Main Pump, Sprinkler Pump & Jockey Pump, Fire Panel.

g) Physical checking of each Fire fighting Equipment's. (Like Hydrant Valve , Hose Reel,Hose Box , Hose pipe And Branch Pipe

h) Checking of Pump room in active working condition.

i) Refilling of Fire Extinguisher will be in contractor scope as per client requirements.

j) Including Charges for fire New / Renewal NOC, for Fire Fighting System.

k) Videography , Photo graphy , numburing & Pendrive etc. as per norms for New / Renewal NOC.

44.1 First Year 4.00 Job. 60,371.54

44.2 Second Year 4.00 Job. 80,495.38

44.3 Third Year 4.00 Job. 1,00,619.23

Total Amount of Fire Fighting Work

Total Amount of Fire Fighting Work

Ahmedabad Municipal Corporation

Proposed Construction of Shelter for Uraban homeless (Renbasera) in TP No.121, FP No. 163 (Naroda, Hanshpura, Kathvada) in Naroda Ward, North Zone, Sarkhej Ward

for Ahmedabad Municipal Corporation.

BOQ of Furniture Work

Sr. No. Item Description Qty. Unit Rate Amount

Supply of Steel Locker with 18 Nos. of Locker, Steel Trainee Locker having size 78" x 36" x 18" made from powder coated

gauge CRCA steel sheet, godrej lock, high quality handle. As per sample approved by department.

Supply of Midium back revolving chair having denim blue color, 12 mm BWR grade ply, L ply frame, 45 mm mold sheet back,

fibre base 27" custer (Nylon), Hidrolic Mechanism etc comp. As per sample approved by department.

Supply of Officer Table (Single Mobile Drower Unit) Size 66"x30"x30", 36 mm post form Formika top and 42 mm post form

Formika side made from ISI grade MDF board, wirh keyboard tray and apron, Mobile Drower Unit- size, 18" x 21" x 27" made

from Post Form ISI grade MDF board unit with three drower, handle, lock, high quality channel. As per sample approved by

Providing & Fixing in Position Vertical Roller Blinds with Minimum 3% and Maximum 5% Light Transperace Screen Fabric

Incuding Providing & Fixing of Powder coated G-Channel at the Topof Window with necessary Screw, Cleats etc. and PVC

Roller (Weight Pipe) and PVC Chain For Up and Down Movement of Blinds etc. of Approved Make and as per Drawings /

Instruction of Engg. in Charge For All Colors and Shades. Rates Includes all Lead and Lift For All Floor Level, All Height , All

Material , Accessories, Fixing, Scaffolding, Labor etc. Complete in All Respects. All Required Accessories & Material must be

From Same Manufacturer.

Providing & Fixing Sun Control Reflective Type Film / Frosted Film as Selected by Architect/ Engg. In Charge For Glass Doors /

Windows etc. as Directed.

Total Amount of Furniture Work

Total Amount of Furniture Work