Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAdmitted-Finance 0 0 BASANT AVENUE PHASE II PUNJAB GURDASPUR PUNJAB 143505 | GURDASPUR | PUNJAB | 143505 | ₹23.7 L | L1 | Admitted-Finance |
| 2 | L2₹26.2 L+₹2.6 L (10.9%)Admitted-Finance 24 C VAIBHAV SUNCITY VISTAR BAREILLY UP 243001 | BAREILLY | UTTAR PRADESH | 243001 | ₹26.2 L+₹2.6 L (10.9%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SHRI SIDHI VINAYAK INFRASTRUCTURE DEVELOPERS L2 | VIJAY ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | Lifting/taking out defective submersible pump of any capacity alongwith column pipe of any size and submersible cable, dismantling the pump from motor, setting aside for repair /servicing / overhauling including lowering the pump set into borewell replacement of packing and nut bolts (if required) and testing after the completion of repair works in the presence of JE/ Engr in charge . | 4 | Each Job | 5,000 ₹20,000 | 4,000 ₹16,000 Lowest |
| 2.00 | Disconnections of electric connection of the starter of 3/5/12.5/15/25 HP Pumping set for repairs installed at LT Panel in the pump house, carefully checking the parts throughly & replacement of unseviceable parts such as electronic Motor Protection relay with inbuilt earth fault protection, Over load protection relay ranging 16 -100Amp, MNX-16-100 contractor, NO-NC for starter, (Front add on auxilary contact block) and electronic timers multi time setting type, 240/415 Volt, 50 Hz of range, complete all as specified & directed. Make- L &T / Havells/Minilec.
Note :- Spare parts to be measured and paid seperately in respective items. | 4 | Each | 3,500 ₹14,000 | 2,500 ₹10,000 Lowest |
| 3.00 | Dismantling the submersible pump assembly capacity 12.5/15 HP completely, checking and segregating serviceable / unserviceable parts, cleaning serviceable parts thoroughly by approved method, replacement of wron out parts, stage casing, pump shaft, impeller, key, bearings , bowl bush NRV, nut, bolts and other minor parts etc including necessary lath / machinery work including all new parts as reqd, re-assembling the pump completely lowering the pump alongwith all accessories to the existing location, overhauling, commissioning, testing and connecting up complete including painting all as specified and directed. | 2 | Each Job | 4,500 ₹9,000 Lowest | 5,000 ₹10,000 |
| 4.00 | Dismantling, cutting and removing the burnt windings from the submersible motor of capacity 12.5/15 HP, rewinding with suitable size / gauge of super enameled / copper conductor and other approved insulating materials, heating, drying and replacement of existing size of submersible cable including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete all as specified and directed. | 2 | Each Job | 12,000 ₹24,000 Lowest | 15,000 ₹30,000 |
| 5.00Supply only of following parts suitable for ser item No 05.00 for Submersible motor :- | |||||
| 5.01 | (a) Oil Seal Set | 2 | Set | 100 ₹200 Lowest | 1,500 ₹3,000 |
| 5.02 | (b) `O` ring set | 2 | Set | 100 ₹200 Lowest | 500 ₹1,000 |
| 5.03 | (c) Motor bearing Bush set | 2 | Set | 3,000 ₹6,000 | 1,000 ₹2,000 Lowest |
| 5.04 | (d) Complete Pad set (Bearing assembly) | 2 | Set | 100 ₹200 Lowest | 3,000 ₹6,000 |
| 5.05 | (e) Rotor sleeve set | 2 | Set | 100 ₹200 Lowest | 1,000 ₹2,000 |
Tender Value
₹25.0 L
EMD Value
₹49,900
Closing Date
1 Sept 2026, 6:00 pmClosed
GE (EAST) BAREILLY
GE (EAST) BAREILLY, NEAR SHAHJAHANPUR ROAD BAREILLY
8561/E8 REPAIR AND MAINT OF SWIMMING POOL INSTALLATION, REPLACEMENT OF PARTS AND ALLIED WKS UNDER GE (EAST) BAREILLY
2026_MES_781757_1
8561/E8
Open Tender
Civil Works
Item Rate
245 days
GE (EAST) BAREILLY
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (EAST) BAREILLY
₹49,900
Yes
16 Sept 2026
30 Jul 2026
8 Sept 2026
30 Jul 2026
1 Sept 2026
13 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Lifting/taking out defective submersible pump of any capacity alongwith column pipe of any size and submersible cable, dismantling the pump from motor, setting aside for repair /servicing / overhauling including lowering the pump set into borewell replacement of packing and nut bolts (if required) and testing after the completion of repair works in the presence of JE/ Engr in charge . | 4 | Each Job | - | - |
| 2 | Disconnections of electric connection of the starter of 3/5/12.5/15/25 HP Pumping set for repairs installed at LT Panel in the pump house, carefully checking the parts throughly & replacement of unseviceable parts such as electronic Motor Protection relay with inbuilt earth fault protection, Over load protection relay ranging 16 -100Amp, MNX-16-100 contractor, NO-NC for starter, (Front add on auxilary contact block) and electronic timers multi time setting type, 240/415 Volt, 50 Hz of range, complete all as specified & directed. Make- L &T / Havells/Minilec.
Note :- Spare parts to be measured and paid seperately in respective items. | 4 | Each | - | - |
| 3 | Dismantling the submersible pump assembly capacity 12.5/15 HP completely, checking and segregating serviceable / unserviceable parts, cleaning serviceable parts thoroughly by approved method, replacement of wron out parts, stage casing, pump shaft, impeller, key, bearings , bowl bush NRV, nut, bolts and other minor parts etc including necessary lath / machinery work including all new parts as reqd, re-assembling the pump completely lowering the pump alongwith all accessories to the existing location, overhauling, commissioning, testing and connecting up complete including painting all as specified and directed. | 2 | Each Job | - | - |
| 4 | Dismantling, cutting and removing the burnt windings from the submersible motor of capacity 12.5/15 HP, rewinding with suitable size / gauge of super enameled / copper conductor and other approved insulating materials, heating, drying and replacement of existing size of submersible cable including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete all as specified and directed. | 2 | Each Job | - | - |
| 5Supply only of following parts suitable for ser item No 05.00 for Submersible motor :- | |||||
| 5.01 | (a) Oil Seal Set | 2 | Set | - | - |
| 5.02 | (b) `O` ring set | 2 | Set | - | - |
| 5.03 | (c) Motor bearing Bush set | 2 | Set | - | - |
| 5.04 | (d) Complete Pad set (Bearing assembly) | 2 | Set | - | - |
| 5.05 | (e) Rotor sleeve set | 2 | Set | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.49 MB
Tender8561.pdf
Tender Documents • 1.73 MB
BOQ_875747.xls
BOQ • 3.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .