GENERAL Ponmudi Campshed upgradation Providing name board plumbing and allied fabrication works at Ponmudi camp shed General Civil Work

Amount

Estimation

9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.2:Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.

OD162219/2024-2025:Supply and installation of acrylic lighting letters- CAFE on the roof of cafeteria including cost of frame with GI 50mm square tube and supporting pipe with letters have 30cm height and proportion width letters have 3mm acrylic 63.5 mm beeding 3 module led 1.5w and DC power on controller

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

OD162355/2024-2025:supplying and fixing Stainless Steel Material Wall-Mounted Rust-Resistance Flip Up Grab Bar 60 Cm for Bathroom Hand Support as directed by engineer in charge

OD162381/2024-2025:Supply and installation of 600 Anti-Slip Stainless Steel Material (60 cm) Wall-Mounted Bathroom & Toilet Purpose Grab Bar for Bathroom Hand Support & Safety Handle as directed by engineer in charge

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete

OD163675/2024-2025:Supply and fixing stainless steel etching Govt.of kerala emblem size 18 inch /nearest size as per the direction of engineer in charge

OD162616/2024-2025:Supplying and fixing stainless steel cut letters of 30cm/nearest size and approppriate width as per approved design

OD162612/2024-2025:Supplying and fixing stainless steel cut letters of 10cm/nearest size and approppriate width as per approved design

OD163673/2024-2025:Supplying and fixing 1.0 hp single phase submersible pump of superior quality (Kirloskar or equivalent) with control panel including extra electric cable of 30 m length

BINUKUMAR N (BID ID -1964417)

Bidder Name

BINUKUMAR N

S KRISHNA KUMAR