Repairing & Renovation work at ITI (Construction of First Floor on CSTC Building) Ta: Bhiloda, Dist.: Arvalli

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Dismentaling of sheet roofing including ridges, Hips, 198.00 Sqmt 49.18

Valleys,Gutters etc. stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

2 Dismentling steel work including distempering and stacking 2304.00 Kg 3.81

the materials with all lead and lift.

3 Demolition of Brick work and stone masonry including 10.00 Cum 562.85

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

4 Removing and scraping of old deteriorated plaster of any 530.00 Sqmt 19.92

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

5 Dismentaling tiled of stone floors laid in mortar including 297.00 Sqmt 49.18

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

6 Dismentling doors, windows, ventilators etc. (wood or 15.00 Each 191.85

steel)shutters including chowkhats architraves, holdfasts and

other attachment etc. complete and stacking them within all

lead and lift.(i) Not exceeding 3 Sq.M. in area.

7 Demolition including stacking of serviceable materilas and 5.00 Cum 1081.84

disposal of unserviceable materials with all lead and lift.

8 Excavation for foundation upto 1.5 m depth including sorting 2.00 Cum 157.08

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

9 Filling in plinth with sand under floors including watering 7.00 Cum 481.81

ramming, consolidating and dressing complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

10 Box cutting the road surface to proper slope and camber for 26.30 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

11 Providing and laying controlled cement concrete M.150 for 24.00 Cum 4543.99

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete

12 Providing and laying controlled cement concrete M.200 and 16.00 Cum 7823.44

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

13 Providing and laying controlled cement concrete M.200 and 43.00 Cum 6173.76

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

14 Providing and laying controlled cement concrete M.200 and 39.00 Cum 6927.83

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

15 Providing and laying controlled cement concrete M.200 and 1.00 Cum 6365.06

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

16 Providing TMT Bar FE 500D reinforcement for R.C.C. work 16809.00 Kg. 77.29

including bending, binding and placing in position complete

17 Epoxy bonding of new concrete to old concrete. 50.00 Sqmt 529.24

18 Brick work using Common Burnt Clay building bricks 41.00 Cum 4495.99

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (Conventional)

19 Providing & Fixing Chicken mesh for joint between brick 66.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

20 Providing 15mm thick cement mala plaster in single coat on 361.00 Sqmt 241.38

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

21 Providing 10mm thick cement mala plaster in single coat on 320.00 Sqmt 215.31

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

22 20mm thick sand faced cement plaster with Gutka Finish on 466.00 Sqmt 321.10

walls upto height 15 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) with 5mm grooves, etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

23 Provding and applying Exterior grade Exposed concrete 1341.00 Sqmt 505.00

texture finish (concrete design wall texture) of approved

make and shade over prepared surface, including surface

cleaning, primer application, base coat,texture coat

application to achieve exposed texture concrete panel

appearance with groove/joint pattern as shown in

drawing,curing, scaffolding, labour, materials, tools and all

incidental charges complete as directed by the Engineer-in-

24 Applying two coats of putty & two coats of primer of 1869.00 Sqmt 40.60

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

25 Wall painting (three coats) with plastic emulsion paint of 1188.00 Sqmt 125.53

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

26 Ceiling painting (three coats) with plastic emulsion paint of 682.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

27 Finishing wall with weather proof exterior emulsion paint 1807.00 Sqmt 185.84

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

28 Providing and fixing pre-cast Rubber Dye / steel Dye inter 105.00 Sqmt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

29 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 265.00 Sqmt 1346.36

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for

30 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 19.00 Sqmt 1195.03

24'' in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white

31 Providing and fixing Machine cut, Free edges, Mirror 12.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) for Trade & Riser including Half Round

moulding front edge of trade jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete.

32 Providing and fixing Machine cut, Free edges, Polished 63.00 Sqmt 2510.86

Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc.

33 Providing and laying water prooofing treatment with china 352.00 Sqmt 1133.22

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

34 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles 229.00 Sqmt 1807.40

having Tegular edges & 15mm thick Densified edges on the Tile Periphery for

Extra Strength the Light weight calcium silicate ceiling tiles shall have, light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humdity

resistance and also having thermal conductivity 0.043° w/m KC. for the best

thermal insulation. The Light weight calcium silicate tile shall be of approved

texture Fine fissured/Spintone/Cosmos having NRC value of 0.5 & Globe having

NRC value of 0.75 NRC or equivalent of size 595 x 595 mm to be laid on true

horizontal level suspended inter locking metal grid of hot dipped Galvanized

Steel sections (Galvanized @120 grams per sqm including both side) consisting

of main 'T' runner suitably spaced at joints to get required length and size of 24 x

38 mm made for 0.30 mm thick (minimum) sheet, 1200mm centre to centre, amd

cross 'T' of size 24 x 28mm made of 0.33mm (minimum) sheet spaced 1200mm

along spaced between main 'T' at 600mm centre to centre to form agrid of 1200 x

600 mm and secondary cross 'T' of length 600mm and size 24 x 28mm made

0.30mm thick (minimum) sheet to be interlocked at middle of the 1200 x 600mm

panel to form grid of size 600 x 600mm resting on periphery wall/ partition on

parameter wall angle pre-coated steel of size (24 x 24 x 3000mm wide of 0.40mm

thick (minimum) sheet with help of rawl plugs at 450mm c/c with 25mm long dry

wall screw @230 mm interval and laying 15mm densified edges light weight

calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintones) in the grid including, cutting /making opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main 'T' runners to be suspended from ceilings using G.I.

slotted cleats of size 25 x 35 x 1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fastners, 4mm G.I. adjustable rods with galvanized steel level

clips of size 85 x 30 x 0.8mm, spaced at 1200mm centre to centre long main 'T'

bottom exposed with 24mm of all T-sections shall be pre-painted with polyster

baked paint, for all heights, as per specifications, drawings and as directed by

Engineer in-charges.

35 Providing and fixing FRP frame size 100x50 mm and 35mm 11.00 Sqmt 2615.05

thick FRP shutter having extra reinforcement on sides &

edges in polish finish. The core of the shutter & frame is to

be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S hinges

with necessary screws & alluminium S.S fixtures &

fastenings & fastener sleeve.

36 Providing and fixing rolling shutters of approved make made 24.00 Sqmt 4546.01

of 80 mm wide M.S. laths inter-locked together through their

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and outside

locking with push-pull operation including the cost of hood

cover and spring etc. complete. (B) Shutters having width

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

37 Providing and fixing in position collapsible steel shutters 16.00 Quintal 6110.52

with vertical channels 20 x 10 x 2 mm braced with flat iron

diagonals 20 x 5 mm size with top and bottom rails of T_rin

40x 40 x 6 mm with 38mm dia, steel pulleys complete with

bolts, nuts, locking arrangements, stoppers handles including

applying a priming coat of red lead paint.

38 Providing and fixing window having extruded aluminum 25.00 Sqmt 1713.70

Colour anodized section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm

x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with

mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

39 Providing and fixing standared extruded of alluminium 15.00 Sqmt 1525.00

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg /

Rmt with colour anodized alluminium frame with 5 mm

thick transparent bronze colour tinted float glass as details

etc complete for Fix window

40 Providing, laying and jointing in true line and level 110 160.00 Rmt 876.12

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

41 Providing and fixing Z-Patti (Z-Type) spacer clamps made of 15.00 Rmt 126.25

Galvanized Iron (GI) of required gauge and size to maintain

a specific clearance between the pipe and the wall surface.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

42 Providing and fixing Safety Grills of required pattern for 746.00 Kg 112.72

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

43 Steel work, welded in built up sections framed work 3.00 Quintal 9108.49

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

44 Painting two coats (excluding priming coat) on external 26.00 Sqmt 22.75

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

45 Excavation for foundation upto 1.5 m depth including sorting 55.00 Cum 122.99

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

46 Earthwork for embankment including breaking clods, 55.00 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

47 Drilling of pilot bore hole of size 250/300 mm diameter at 30.00 Rmt 1089.79

above site by mud finish direct rotary rig etc. complete

48 Supply of 200 mm diameter V-wire screen pipe of slot size 10.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

49 Providing & Laying Rain Water Junction Chamber of Clear 6.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

x 1.06 RCC M200 top slab of thickness 0.15m with TMT

steel and 455mm x 610mm cast iron manhole cover with

frame weight not less than 35 kg as per directed by Engineer-

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

50 Providing & Laying Filter chamber of brickwork 0.23 thick 6.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m and

excavation dimension of 2.80m x 1.96m x 1.35m including

C.C. M200 Bed Concrete 0.15m thick and RCC M200 Top

slab of thickness 0.15m with TMT steel, Including 15mm

(1:4) thick cement plaster inside & outside with Cement

slurry & top cover with frame of minimum weight of 35kg,

including filling filter material of 200mm thick each layer of

25-40mm, 10-20mm of BT metal and sand as per directed by

engineer-in-charge

51 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation in

any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

52 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 30.00 Pt 582.77

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

53 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 19.00 Pt 809.01

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat.

54 Point wiring for Individual Plug with & earth wire of 1.5 4.00 Pt 1046.36

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

accessories. [III] For 16A Plug and 16 amp switch with 2-4

sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from

mcb d b board.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat.

55 Point wiring for on board Looped Plug with 6A Modular 10.00 Pt. 309.06

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories Cat. III

56 Providing and erecting ISI mark Medium class RIGID PVC 160.00 Mtr. 24.24

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (a)20 mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

57 Providing and erecting ISI mark Medium class RIGID PVC 40.00 Mtr. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b) 25 mm

58 Providing and erecting Mains with 1.1 KV grade FRLS PVC 198.00 Mtr. 104.03

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

59 providing and erecting Mains with 1.1 KV grade FRLS PVC 35.00 Mtr. 532.27

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (i)

4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

60 providing and erecting Mains with ISI marked, 1.5KV grade 10.00 Mtr. 177.76

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required.(g) One wire 16.00 sq. mm

61 Supplying and erecting Flexible PVC insulated multi strand 12.00 Mtr. 58.58

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed.(e) 1.50 Sq.mm 3 core round

62 Providing & erecting Switch board for Computer or electric 8.00 Ea. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with

single mounting base frame covered with textured/metallic

/white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories cat-III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

63 Supplying and erecting LED indoor fittings with LEDs of 30.00 Ea. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet cat III

64 Supplying and erecting LED street light / Flood light fittings 6.00 Ea. 5175.24

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (B)

Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (iii) Above 60 to 89 watts cat-III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

65 Pproviding and erecting Approved make Four pole moulded 1.00 Ea. 7469.25

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III Note:-1

Add Rs. 10% extra for housing/Encloser of MCCB for Item

No 3-4-1 to 3-4-12 (The Enclosures should be used of same

company of MCCBs to be used)

66 Providing and erecting Approved make Earth fault Relay 1.00 Ea. 5156.05

suitable to mount with inter connection suitable to following

size of moulded case circuit breaker having CT ratio &

MCCB rating as following along with shunt trip 220V AC.

with all internal connections & complete erected in existing

M.S.housing.. (1) 15 A -100 A , CT Ratio 1/100

67 providing and erecting Miniature circuit breaker single pole 6.00 Ea. 297.95

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

68 providing and erecting Miniature circuit breaker single pole 24.00 Ea. 123.22

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III

69 Providing & erecting 415 V MCB Four Pole for Motor & 2.00 Ea. 811.03

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (c)63 Amp. Cat.III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

70 Providing and erecting Sheet Steel powder coated MCB 1.00 Ea. 3412.79

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iii)8

71 providing and erecting Approved make RCCBs conforming 3.00 Ea. 2458.34

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (ii) 40Amps. DP Cat.III

72 Providing and erecting Annealed bare Copper wire 4.064mm 3.00 Kg. 794.87

73 Supplying & erecting earth pit of minimum bore dia.150mm 1.00 Ea. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

74 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI 160.00 Mtr. 151.50

armoured cable multistrand / Solid Aluminium conductor for

1.1 kV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B) 4 core

75 Providing and, fixing heavy duty flange type brass cable 12.00 Ea. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(B) 2 to 4 core 6 Sq. mm

76 Solder less crimping type Aluminium lugs conforming to IS 48.00 Ea. 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.(A)

77 Providing & erecting Approved make Power Saving 45 - 50 19.00 Ea. 1948.29

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be approved

by Engineer in charge))

78 Supplying and erecting 19 / 20 mm. nominal bore Medium 19.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and earthing.

79 Supplying & erecting fan hook box of 10 mm M.S. round 19.00 Ea. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

80 Providing 2.5mm.thick laminated acrylic sheet to cover the 19.00 Ea. 18.18

fan hook or Fan box.

81 Supplying & erecting approved make SMC press moulded 6.00 Ea. 476.72

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (C)150mm x

125mm x 100mm [deep]

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

82 Supplying and erecting B class galvanised iron pipe 32 mm 6.00 Ea. 343.40

outside dia 45 cm long duly welded on 20 cm x 20 cm x

mm thick M.S. base plate, erected on wall or corner for

mounting street light luminaire with necessary hardware

materials duly painted.

83 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power 10.00 per kw 44081.45

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With

Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR

Coated), High efficency and positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 19.5%-22%, Normal operating temperature 45'C, Junction Box with

Waterproof IP67 & MC4 Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules, Thep. temp. co-efficient of the PV

module shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg)

With 10 year Product warranty. Modules must be complied to the DCR(Domestic content

requirements). The Ration of AC to DC is 5:6 for the Installation capacity which are given

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% - 98.9%,

O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi:

<3%, Operating Tempreture Range: -25~60°C, Integrated protection of Inverter are Anti-

islanding Protection, Input Reverse Polarity Protection, Insulation Resistor Detection,

Ground fault protection, Residual Current Monitoring Unit, Output Over Current

Protection, Output Short Circuit Protection, Output Over Voltage Protection, PV array

string fault Protection. Protection Degree: IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi. Integrated, Input Reverse Polarity Protection Integrated,

Insulation Resistor Detection Integrated, Residual Current Monitoring Unit Integrated,

Output Over Current Protection Integrated, Output Short Circuit Protection Integrated,

Output Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross bars, nuts and

bolts, etc. shall be Hot deep galvanized with minimum 80micron coating. The Rectangular

/ square /circular hollow pipe section used for the structure should have a minimum

thickness of 2.0 mm. other than above, the material thickness should be minimum 2.5 mm.

A certificate of a structural engineer certifying the strength and stability of the mounting

structure to withstand the weight and wind speed of 150 km/hour , shall be submitted by the

vendors. Hot Dipped Galvanized steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be suitable for carry the load of solar

panel,wiring, sprinkler system etc. with necessary foundation work/wall mount, j bolt,

anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most edge of solar panel shall not be less than

300 mm to 1200 mm or as per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

Ground fault protection, Residual Current Monitoring Unit, Output Over Current

Protection, Output Short Circuit Protection, Output Over Voltage Protection, PV array Estimated

string fault Protection. Protection Degree: IP65, User Interface LCD & APP, Datalogger & Rates Total Amount

string fault Protection. Protection Degree: IP65, User Interface LCD & APP, Datalogger & Rates Total Amount

Item of work Quantity Unit

No. Communication: GPRS / Wi-Fi. Integrated, Input Reverse Polarity Protection Integrated, In figure to estimated

Insulation Resistor Detection Integrated, Residual Current Monitoring Unit Integrated, quantities

Output Over Current Protection Integrated, Output Short Circuit Protection Integrated,

Output Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross bars, nuts and

bolts, etc. shall be Hot deep galvanized with minimum 80micron coating. The Rectangular

/ square /circular hollow pipe section used for the structure should have a minimum

thickness of 2.0 mm. other than above, the material thickness should be minimum 2.5 mm.

A certificate of a structural engineer certifying the strength and stability of the mounting

structure to withstand the weight and wind speed of 150 km/hour , shall be submitted by the

vendors. Hot Dipped Galvanized steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be suitable for carry the load of solar

panel,wiring, sprinkler system etc. with necessary foundation work/wall mount, j bolt,

anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most edge of solar panel shall not be less than

300 mm to 1200 mm or as per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of System

with necessary Swichgears (Suitabel size and protection of ACDB & DCDB), inter

connecting wiring, earthing system as per the CEIG drawing approval, lightining arrester

system as per the CEIG drawing approval, all liasoning work with various gov. dipartment

like state nodal agency,DISCOM & CEIG is included in agency scope (Excluding All

charges namely GEDA Application fees, Solar connectivity Charges, Meter connectivity

Charges, Meter testing Charges and system stability/strenthning charges.) (B) Grid Tied

Solar Power System: 7 - 10 kW (3 - phase)

Total Cost of Construction Cost

(Rupees Sixty Nine lakh Fifty Five Thousand Sixty Four and Forty Four Paise Only)

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…6955064.44 Put to tender Rs.6955064.44

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

5 Dismentalling of Credit materials amounting of Rs. 69811.20/- must be recovered from Contractor's respective

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division